Problem with my printer hp officejet j6480 all-in-one laptop

Similar Questions

• keyboard on my printer hp officejet j6480 all-in-one laptop has stopped working

  I can't enter the fax number or change the number of copies to print. Need suggestions for this problem.

  Hello

  To reset the printer in some cases, this might work.  With the printer, unplug the power supply from the wall and disconnect the power to the printer.  Wait 60 seconds and then reconnect power.  Reset the printer and must go through the starting sequences.  See if this reset helps.

  Currently, HP has some offers on hp.com for new printers, or even go to Staples, Best Buy or Costco.  If you call HP Shopping sometimes they have specials going.  Here is the link to HP Shopping if the reset does not help you.

  http://www.shopping.HP.com/en_US/Home-Office/-/products/printers/printers

• Analysis of the problems with the new HP OfficeJet 8500 all-in-one

  I recently purchased HP OfficeJet Pro 8500 A and the scanner does not work properly. After 8 hours (really) on 'chat' with HP I was told that I have to upgrade Windows XP to Windows 7. I also have some old Acrobat 6 on my laptop. Two questions: will be updated to Windows 7 remedy problems scanning or do I also have to upgrade to Acrobat? Thank you.

  Hello

  I don't know why HP would recommend the upgrade to Windows 7 when there is XP drivers available for the printer, if it's the right model:
  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?LC=en&DLC=en&cc=us&product=3752459&

  Install all the drivers/software listed for their printer, and then try again.

  Check the troubleshooting steps provided in the article below.
  Slow / no response from the scanner
  http://h10025.www1.HP.com/ewfrf/wc/documentSubCategory?tmp_rule=53195&tmp_task=solveCategory&LC=en&DLC=en&cc=us&site=null&product=3752459&key=null

  Also, here is the link for Windows 7 as for Acrobat 6 compatibility:
  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/details.aspx?type=software&p=Adobe%20Acrobat&v=Adobe&UID=6&l=en&pf=0&PI=0&s=Acrobat%206&OS=64-bit

  Refer the article to upgrade to windows 7.
  Upgrading to Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/products/upgrade

• I have a HP officejet J6480 all-in-one printer. The screen is white and yellow light flashing

  I have a HP officejet J6480 all-in-one printer. The screen is blank and there is this little yellow light flashes on the Cancel button.  I can not print or fax anything because the screen is empty. Since the light started to Flash the entire printer has not worked. Can someone please HELP! : womansad:

  Well, if you haven't tried this and then create a coercive power reset:

  Do not activate the wide (although you can), remove the power cord at the back of the printer. Wait at least 30 seconds, then reconnect the power cord to the printer. Turn on the printer. If that clears up the flashing light/white screen, then try printing etc...

  If this is not the case, see if something visible is originally the error state such as paper jam, odd items in the printer, nothing fancy. Also try to plug the printer directly into the wall outlet as opposed to a look/power surge Strip, or even try a Jack in another room if it is not successful.

• printer hp officejet 5610 all-in-one

  my hp officejet 5610 all-in-one does not not with my window 7 worked before the ideas of how to get it online

  Most often when a device does not work, it is because the driver is damaged.  Re-install a new copy should help

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

  http://captaindbg.com/how-to-update-drivers-on-Windows-7/

• Printing problems of Notebook PC G72 for Officejet J6480 all-in-one

  Unable to print on my Officejet J6480 HP printer all in one of my G72 Notebook PC.  Do not know what is happening, I could possibly print incorrect setting.  But I was able to print before.

  Hello

  · What is the operating system installed on the computer?

  · You receive an error message or error code when you try to print?

  · This occurs when you try to print with a particular application?

  Try the steps listed in the link below: printer in Windows problems: http://windows.microsoft.com/en-US/windows/help/printer-problems-in-windows

• Have a disorder of the function with the printer officejet J6480 all-in-one of analysis.

  I have a problem to use the scan and copy function.

  The result is a black image dark without texts even configured to scan as a PDF under Windows 7.

  It is even when you use the function "copy".

  Hello vtcy

  It doesn't seem to be a problem with the scanner itself because the copying and scanning are performed. The links below are for the abandonment of the warranty support options and the program of HP recovery. It may be useful to negotiate in some credit to acquire a new purchase of course that if you really like your printer, you can get a repair.

  HP out of warranty of the Support Options for selection of printers HP

  HP trade-in program

• Printer, HP Officejet 7410 all-in-one

  I recently acquired a 7410 all in one, and can't use it.  As soon as I plug turns on and begins what appears to be a search.  This research does not stop.  I can't turn off without unplugging.  I can't access the menu.  I can't reset the unit either.   any ideas or suggestions would be much appreciated!

  Hello

  It seems that the problem is with the printer... Please turn off wireless and do not connect any other power cord other than the power cord. then try to turn on the printer... otherwise I'll have to tell you that the printer is to have some sort of hardware problem and you need to replace the printer.  So go ahead and try to restart the printer and snack if it is not resolved, then you need to replace the printer.

  Concerning
  Aneesh

  ***********
  I represent HP
  You can say thank YOU by clicking on the STAR of CONGRATULATIONS. If my suggestion solves your problem Mark as a 'SOLUTION' in this way, others can benefit thanks in advance!...

• Problems with the touch screen of HP all-in-One after upgrading Windows

  I recently updated my version of Windows (64-bit) with system updates and then a full version updated to version 8.0 version 8.1.  After the update is complete, I started to experience a strange problem with the touch screen on my HP Envy Rove.  The screen would flash repeatedly one set of points in the right lower quadrant of the screen as if the simulation random screen button.  There is no way to stop this.  If the screen on a keyboard was pulled up, letters in the place of the flashes would be broadcast in the fields on the screen.

  The only way to stop the flashes of screen has been to go into the Device Manager and disable the HID-Compliant device driver.  It stopped (system generated keys) flashes, but also disabled my touch screen input.  So now the system is usable, but without the benefit of the touchscreen.

  Here is the information on the driver:

  HID-Compliant device

  Date: 21/06/2006

  Version: 6.2.9200.16851

  (input.inf)

  I tried updating the driver, but this seems to be the latest version available.  Go back to the previous version of the driver, could solve the problem, but I could not locate on the support web site.

  Any suggestions on how to solve this problem and re-enable the ability of my touch screen?

  Hello

  Downloaded drivers from the manufacturer will be the most tested and up to date available. The best place to download a driver is directly from the manufacturer of the equipment.

  So I suggest you to install the driver that is available on the HP website for your model.

  Troubleshooting of touch screen in Windows 8

  http://h10025.www1.HP.com/ewfrf/wc/document?cc=us&LC=en&DLC=en&docName=c03488148

  Just reply with the results.

• Problem printing HP Officejet 5610 all in one printer

  Your Question: lately I got a printing problem documents and the printer 5610 has quite wierdly. Sometimes I see my printer name as the default name at other times that I can't find. When I try to add, I get a message Windows can't open add printer. Local printer spooler service is not running. Restart the spooler or the machine. Sometimes I run a malware software and restart the computer, the printer is connected automatically but sometimes I can't find the printer. Strangely, when it's not printing yet I can scan documents to the printer on my computer. Help, please.

  Sorry you are still having this problem. I see that you have an error in the spooler. This usually converts with a problem of Windows itself.

  Here is a video that can help you with the problem.

  http://www.YouTube.com/watch?v=MgHpoNZgbvQ

  Let me know if it helps.

• OfficeJet J6480 all-in-One, scanner has stopped working

  I'm on OS 10.6.2 on an iMac Intel Core Duo.  I got a J6480 Officejet for about a year.  The scanner worked fine when I bought it first, but now it has stopped working.  If I use the HP software, I get a message "an unknown error has occurred."  If I try to scan using the buttons on the printer, I get an error of "No scan option available" on the screen.  I already tried to uninstall and reinstall the software and it did not work (although before the reinstall, the error messages comes to say, ' no scanner available, "so I guess it's an improvement?).

  I do not use the scanner a lot, but my guess, is that he has stopped working some time after I've upgraded to Snow Leopard.  I was regularly running Leopard when I bought the machine and first used the scanner.  I see a lot of messages on the scanner not working not not with Windows, but I have not found anything with Mac in particular.

  Help?

  OK, one more not - we will reset the printing system:

  -Sys Prefs, Print & Fax
  -Right (Ctrl) click the box of the print queue and select Reset Printing System.
  -Select the sign + to add again. Search for the printer, select it, and wait until the button 'Add' becomes available. Until it clicks.

• try to install the drivers for a printer (hp officejet 6300 all-in-one) in a windows vista laptop.

  I insert the cd but it tells me that it is not supported.

  the cd for the version 6.0. do I need an updated version in order to get my printer working?

  http://h20180.www2.HP.com/apps/lookup?h_lang=en&h_cc=au&CC=au&h_page=hpcom&lang=en&h_client=S-A-R313-1&h_pagetype=s-002&h_query=HP+OfficeJet+6300++printer&submit.x=11&submit.y=6

  For starters, you have given a serial number of the printer, not the printer number.

  Go top HP website, get the right drivers and install your printer.

  Details of HP: http://welcome.hp.com/country/au/en/contact_us.html

  See you soon.

  Mick Murphy - Microsoft partner

• I lost the CD start to my officejet 5510 all-in-one printer

  I fell off my PC under Windows XP and my old printer hp officejet 5510 all in one laptop no longer works. I can't find my CD to reinstall boot. Is that why I get an another boot CD or a way to get this printer working again?  Thank you for your help, Sue

  You can download the full software for printer you in the section to download the software and drivers of the Portal of support for your printer.

• OJ j6480 all in one. : printer connected to the network, but will not print.

  OfficeJet j6480 all-in-one Windows 8

  My printer configuration report show that the printer is connected to my home network. My Control Center shows that my HP printe (my only printer) is listed as the default printer. When I open it, it shows a document in the queue, and offline. When I click on 'offline' the document in queue is considered and when I click on "Printer" in this window, the drop-down list displays the default printer, but 'use printer offline' isn't not verified. Bottom line, it's that I can't print. Help much appreciated woutd.

  I found someone with a similar problem and a simple solution. I deleted my printer in the "devices" list and reinstalled

  It worked. I suspect that your suggestion about the IP was probably on the brand, it had not occurred to me.

  Thanks for the quick response.

• HP officejet 9120 (all-in-one) does not No Scanner for driver problem.

   

  Mr. President is respected!

   

  I have a portable printer Hp officejet 9120 (all-in-one), but no scanner to work here for driver problem. I downloaded the driver from the Hp site, but not here.not updated driver does work on XP, win 7 please help me in this matter.

   

   

   

  Thank you

  (Munir Malik)

  Pakistan

  [email protected]

   

   

  Hello

  You might have more luck on the bussines forum, this is the forum of consumer and your unit is regarded as a bussiness unit, so bussiness forum could be a place where you get a better answer.
  Find it with the link below.

  http://h30499.www3.HP.com/