[PROBLEM] Y510P HDMI to TV LED 32'

Similar Questions

• Satellite L670 - strange problems with HDMI connection

  Hello

  I experience problems when you use the hdmi connection:

  My computer: Satellite L670

  Scope: Watch movies on the LCD external (sony bravia) via hdmi

  Computer param: Clone computer - screen plugged - features full power - the screen of the laptop has been set in order to let the computer works normally when closed.

  When you play a movie with the laptop open screen, no problems. I have twice the movie, one on the computer screen and the clone on my external LCD. Perfect.
  But if I close the laptop screen (which would normally have no effect), lagging behind the film on the external display. He stops each 5 seconds for a few seconds and leaves, making it unreadable.

  Did someone had such a problem? Any suggestions?

  Your help will be appreciated.

  If you need to know everything, just ask; (o)

  Thank you.

  When this happens you noticed more often and HARD disk activity flashing LED of the HARD disk on your laptop?

• y510p hdmi games at 120 Hz

  Hi guys

  I recently bought a Lenovo y510p GT750m sli, that's pretty impressive for the games, but now I think to buy an external monitor, and here I need a bit of advice.

  the monitor I need if work of handel via my Macbook and games via my y510p, for the work I am looking for a monitor 27 "1440 p to 1080 p games would do well.

  Basically, I have 3 questions:
  -How can I be sure that my y510p have HDMI 1. 4 b (b is important here)?
  -I'll be able to get a good gaming performance on an external monitor via HDMI 1. 4B (my concern here is, I'm going to invest in a screen and find myself less than 30 frames per second or aving to lower the quality of game dramatacilly)?
  -l'y510p will be able to run 1080 p 120 Hz on a 1440 p monitor?

  I have my eye on a few of the monitor, if anyone has any experience with them, I'd love to hear about them (especially on game performance)

  -DELL U2713HM
  -Samsung S27A850D
  -ASUS PB278Q
  -BenQ BL2710PT

  (ps: I'm not sure above would be able to make 120 Hz 1080 p)

  Hey guys, thanks for the response guys.

  I decided on an ASUS PB278Q, this is a great monitor, works like a charm on my macBook which is my daily workstation.

  On my Lenovo p510 im to Office impeccable 2560x1440px via HDMI 1.4, I disabled the internal monitor to the laptop, no need so I will save the gpu rather ' etc.

  There are some pixel/artifact problems, do not know what to call it, for the DS, in the window of the browser chrome for Battlefield 4 I get a few strange flickering pixels in bright colours red/green, but only in the middel of the browser when the page uses opacity layers, I have not seen this in any games or other applications so I count them for nothing.

  To the bottom of the scale of the problems: the screen seems to manage to the bottom of the scale is pretty bad, I have e.g. set the monitor 1920 x 1080, text etc. is slightly blurry, it also takes effect in games, I don't know if it is a question of monitor og gfx card, I can only reconmmend by running the Office at 2560x1440px

  Games:
  Virtually all games run smoothly with the external monitor in the middle to high heat, I run most of the games in 1080 p mode.

  Battlefield 4 - BF4 is quite demanding, I tried running at 1440 p high, but it lags a lot, so currently im running the game in 1080 p 59.9 hz settings means to 57 to 60 fps, even on 64player cards in the center of the heat , light sweet, I get about 120 frames per second , but I recon I see only 60 of them since the screen is set at 60 hz.

  Diablo 3 - 1080 p works great in 1440 p high, at the top is possible but a few times so that walk a few stuttering occurs, interest in 1440 p image is rich in saturation, but 1080 p, it seems more gray'ish light, like a high gamma version. (update: run the game in 1680 x 1050 to get the same rich saturation like 1440 p )

  Guild wars 2 -to 1440 p settings means v-sync (choose autodetect to preset settings) I get about 60 images per second, which is very nice

  Overall:
  even if you game on the native of the lenovo display is large enough, nothing beats having a widescreen from 27 "to eye level, in most of the cases the y510p's to the task, but for FPS games properly, you will need to play 1080 p to og medium low to get a good pace, even though It is absolutely worth playing on a screen of 27 ", my games have improved a LOT.

  If you plan ARICI to use the monitor for the y510p, I'd go with a cheaper screen, maybe a 1080 p version because of the problems of scaling of the pb278q from asus, but since im using it for my mac book as well, it works fine .

  So there you have it, game on the y510p on an external monitor to 2560x1440px with FPS desente and quality gfx is possible .

• No audio HDMI via HDMI to SONY LED TV connection

  When I connect an HDMI cable to my SONY LED TV it shows no audio HDMI to TV, only the image (what ever on pc), but the audio is coming from speakers to computer.

  Hi Umesh,

  Follow the steps below to see if the problem can be solved.

  1. right click on the volume icon in the system tray, click playback devices.

  2. right click on the empty space of the playback window, click on "Show disabled devices" and "show disconnected devices".

  3. check if HDMI is listed, if so, set as the default value.

  For more information:

  HDTV: Frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/HDTV-frequently-asked-questions

  We know if you need help. We will be happy to help you.

• Serious cutting problem with HDMI HD output a7s

  I am a filmmaker from THE base and possess an a7s & package Odyssey 7 q + recorder camera.

  I just noticed a serious technical problem that must be addressed. When shooting video with the A7s, the component of luminance of the HD which are sent via HDMI signals are cut to 100IRE, no matter what profile picture gamma setting is chosen. I can see it in the waveform, the chrominance information is not cut exceed 100IRE. For example, when I turn the curve of gamma slog2, exposed blue sky just before clipping has kept above blue channel 100IRE, but more balanced information clip of signals (such as a piece of white paper).

  This problem does not appear in the output HDMI 4 K or record XAVC-S internal. It is true both of these formats. It is specific to flow out of the HDMI port uncompressed HD video. I'm sure that it is a firmware issue.

  This conclusion came after I noticed it during a shoot and have led to extensive testing. I would prefer a real difficulty as opposed to workaround, because it cut a stop of information from the latitude to highlight whenever I have to shoot 60 p or don't want to shoot 4 K.

  Apparently, it's a problem with the recorder of Odyssey is not correctly interpret the sony exposure output scaling. Convergent Design is working on a fix to include with their next update of the firmware. I see this problem on Shogun I tested.

• Satellite X 200-problem resolution HDMI port

  Hello

  I have an X 200 - 1AA.
  It comes with the graphics card 8700GT. I have Windows Vista Ultimate installed and the latest Toshiba drivers for this card. (NVIDIA has universal drivers for this card).

  When I connect to the computer via HDMI to my Plasma Hitachi 37PD5200 screen, which can go with resolutions up to 1600 x 1200 max resolution I get is 1024 x 768.
  I try to change the settings in the Nvidia Control Panel, but there is no custom settings for the HDMI port. The software detects the Hitachi monitor and says it is only capable of 480 p EDTV. And I can't change that.

  If I connect via the VGA cable, works very well, with 1600 x 1200 resolutions. But the problem is that Toshiba HD-DVD player works only via the HDMI port.

  If I connect a PS3, Xbox 360 or my player to DVD via HDMI, all devices to detect 1080i.

  As someone had this problem before?
  Any ideas for me?

  Thanks in advance,

  See you soon,.
  André Antunes

  X 200 - 1AA
  T7700 2, 4 GHz CPU
  4 GB DDR2
  300 GB 4,200 RPM HARD drive
  8700 GT graphics card.

  Hello

  Very strange, I know that the satellite X 200 series supports the standard HDMI V1.2 (up to 1080i). You can watch HD DVD movies on internal Toshiba laptop screen with a resolution of 1080i pixel and external TV Full HD with 1080 p resolution.

  I m not 100% sure, but I think that this setting can be changed in the BIOS. Check it!

  Your comments would be very appreciated.

  Hi dude

• Toshiba 22L1334G problems with HDMI

  First of all, thanks to all for trying to help me :)

  Now let's make the problem: I bought this TV yesterday and I immediately connected on my PC (video card AMD R9 270 X) with an HDMI cable (the cable is Rev. 1.4 and less then 1,5 m).

  The global definition is very good, but I have in fact 2 problems:
  first of all, the colors are very saturated and can't do their natural even if the video card values.

  Second, the text with fonts bit if it's not black is very blurry pixeled, very difficoult to read.

  O Google searching I found similar problems for many people, but they have solved the problems, simply assign the HDMI PC input.

  Unfortunately, they used Samsung or LG screens and there in my Toshiba is not the parameter to indicate the HDMI signal PC.

  What can I do to use this device as a monitor in the right direction?

  Hello

  First of all I must say that this device isn t 22L1334G Toshiba PC monitor but it s a TV that can be connected to the computer via the available RGB (VGA) port.

  Thus, in case you want to connect a computer to this TV and want to use it as an external monitor, you should use the VGA port available

  I must say that I had the same problems in the past with blurry fonts using the HDMI port.
  I connected a device combined monitor/TV and connected my laptop to an external monitor s HDMI port.

  Blurry fonts were really a pain using office applications, but I found a solution; my device supported an additional DVI port and I was able to connect my laptop to monitor cable HDMI-DVI.

  My other monitor takes care of one other manufacturer supports additional parameters to change the sharpness of police so I can use the HDMI port.

• Satellite P300-150 - problems with HDMI output

  I recently reformatted my hard drive due to a nasty virus. I now put my old favourate XP Pro with service pack 3. Never had very well with Vista.
  I managed to find almost all the drivers, I think I need, but the HDMI does not work and I can't seem to find the HDMI for XP/Vista Manager only. XP is too old to support HDMI?

  Is their a fix or a piece of software that will lead the material in an XP environment?

  Hi markjj,

  Normally you n t need a special driver for the HDMI connection. It is only important to install the driver from Toshiba Web site viewing. After that, you can use the HDMI connection and switch between monitors when you press FN + F5. It s the same procedure as in Vista or other operating systems.

  So have you ever tried on XP HDMI connection?

  Test and give us some information. If it doesn't we can try to solve this problem. :)

• Problems with HDMI Port 3/4 on Toshiba 46xv733

  HY everybody,

  When I try to connect a device (PC, Xbox, or PS4) HDMI1 or HDMI2 (where everything is fine) for HDMI3 or HDMI4 I can't make them work properly. Resolution passes something a cable not only 30 Hz. When I try to change the resolution (on PC) the photo does not match the screen (for large or too small).

  I searched throu the documentation and the Web but can't find info HDMI3/HDMI4 are different from HDMI1/HDMI2.

  The TV is Toshiba 46xv733.

  Any suggestion on how to solve this problem would be highly appreciated.

  Thanks in advance

  Hello

  In [User Guide | http://www.toshiba-om.net/LCD/PDF/English/XV733-32374046-English.pdf] you can find some information that certain HDMI devices at the beginning may not work properly with your latest HDMI TV due to the adaptation of a new standard.

  In this case you must unplug your HDMI cable first, and then try the two options settings. INSTAPORT content type and turn off.
  You start HDMI source should work with your TV.

  The HDMI 3 seems to be a little different from the HDMI 1 and 2.
  3 HDMI supports digital and analog sound.
  HDMI 1 / 2 / 4 supports digital audio ONLY.

  The HDMI 3 must be used in order to receive sound from a PC connected (via HDMI to DVI cable).

• Acer E5 problem audio hdmi 571G

  Please tell me why when I connect to a TV with an HDMI cable, I have the video signal, but not his!

  I have the latest driver update(video,audio,all)!

  In (audio) playback devices, Digital Audio (HDMI) (not connected) gray apear and I can ' t change anything! "

  The cable is good because works(video+audio) with another laptop and even TV!

  Help, please! I'm updating the bios, installing and reinstalling drivers... nothing works...

  the last things to try, if you haven't tried to alread:

  Uninstall the Intel drivers and check if the HDMI reading is always there and check if it works

  Uninstall the nvidia drivers and check if the HDMI reading is always there and check if it works

  She has some problem of drivers, but without the cell phone in the hands, it is very difficult to restrict the question.

• Problems audio HDMI - Aspire V Nitro

  Hi all:

  I have a problem with my laptop Aspire V Nitro. I have a Sony amp that I use to listen to the radio and play music. I have 2 speakers and a subwoofer connected to the amplifier. When I play the radio on the amplifier or when I connect an HDMI android Tablet and play music, the speakers and subwoofer working great. When I connect my laptop via HDMI cable, only labour speakers, subwoofer is off. I tried to update the audio drivers, etc, etc, but without success.

  ¿Any idea what's wrong?

  Thank you and best regards,

  Ignacio

  Right click on the speaker near the clock icon and the date, choose playback devices, click on HDMI and click on configure, you are able to put the 2.1?

  If this is not the case, check on the options of the Intel VGA drivers.

  I think HDMI is streaming a pure audio (stereo) 2.0 for the subwoofer is not involved, or you should check some settings of your amplifier to activate the subwoofer even without the active secondary channel streaming.

  Please check if your Intel VGA driver is the latest available on the Acer support Web site:

  http://us.Acer.com/AC/en/us/content/support

• Update NVIDIA problems: exit HDMI does not.

  Hello

  So I've updated NVIDIA GeForce 8200 m G yesterday to the new version (285.62). I had the 186.68 version ou.85, I don't remember. When I tried to connect my LCD HD TV to my laptop, it has not worked, everything was the same. So I tried to go to control panel > Mobile PC > to connect to a projector... > Connect monitor and changed the setting so that the display show only on the TV. When I click 'OK' my computer screem black but I could still see the light from the screen, and nothing happens. No video, no sound. My computer buttoned up like that and then I had to restart.

  So, I'm looking to see what was wrong and found that a lot of people where having the same problems, but for a different computer. I see that some people just had the old version that they or an older version then v280 I come, I tried it and got v275.33 and still the same thing happens. The computer recognizes it, but nothing happens. Just black screen. I also tried restoring but I re-installed so it did not work.

  I don't know how to get my old rear drive, if anyone can help me? Does anyone know how to fix this? Connect to my HP PC to my TV. I have the HDMI cable and it worked in the past, so I think it was the update.

  HP G60-121WM

  Windows Vista 32 bit

  NVIDIA GeForce 8200 M G 1407 MB

  If somebody finds the problem, you can send me a link? I also tried to make the 'system restore', but I just continued to get a failure message. If you need more just informationg say.

  Thank you.

  P.S. I also saw this chanded "NVIDIA audio HDMI" "NVIDIA HD Audio" but know that he just says "High definition Audio Device", which could take place? In addition, the site NVIDIA said that I need to uninstall my NVIDIA Windows display drivers. I did and when go out to uninstall. This is not, but I have v275.33 Verde drive that I received from NVIDIA Web. I did something wrong?

  http://www.nvidia.com/object/IO_13955.html

  Yes, I see and it always the accident when I use it.

  However, I think I solved it. I just when the HP, shearch for my PC website and downloaded the reader but I had already that don't but did ' t work. I keept getting a message that I was not under windows vista. Then I opened the file from the disk I have download and when Windows 32 folder and it had a probram for installation.

  I tried and the installer has just stood there, not doing nothing. I closed by using the the windows Task Manager ("ctrl" + "alt" + "del") and run the driver installation program again. Before I could click on the button continue, my screen will turn off and on to turrn. So I plugged the HDMI cable and when to the NVIDIA Control Panel and made my tv the 2nd screen but the sound does not work.

• Problems with HDMI output

  I have a HP G61 Notebook PC with windows 7 Home premium

  When I plug the HDMI cable into the laptop and connect it to display the output of the speakers or headphone stops. The bars of output on the mixer vloume display output from the HDMI device, but nothing independent headsets and headphones or speakers.

  What is the case can someone help?

  OK problem solved. I typed sound in the search on windows 7. Then went to the HDMI audio output and off the exit. I hope this helps someone the with this problem

• Sorry - not a solvable problem - 13 Firefox me through led to the Chrome for now - Gmail misbehaves and Trusteer report is not compatible... See you next time

  I'm tired of be driven out by the updates and Firefox compatibility problems... but otherwise updates are great.

  Can I disable automatically updates please

  Thank you people

  easily soluble: firefox > options > advanced > updates

• Potential problem of HDMI port?

  A colleague went to the VZW store this AM and got a Bionic. In the Notification bar, there is a message 'Connected to the HDMI cable' persistent. The device is not clearly so connected. Battery pull has nothing to aleviate symptom. In my humble OPINION, looks like a defective unit. Any ideas other than the exchange of the unit?

  Unit VZW exchanged this AM no questions asked - apparent evidence.