ProBook 450 g2: the fingerprint reader is not connected with 64-bit windows 8

Similar Questions

• The fingerprint reader is not connected

  Hello everyone,

  Well as you can see the title sums up my problem...

  I have HP Pavilion dv5 1160ej which I bought recently, and then this problem came from nowhere!

  the computer does not register my finger on the fingerprint reader

  I have a red 'X' mark on the icon of the DigitalPersona software, and when I click on the little finger to enroll and register my fingerprints in the wizard on the software that he told me that "the fingerprint reader is not connected!"

  How the hell should I connect it when it is integrated to the pc?

  Device Manager is great no problem, I have uninstalled and reinstalled the driver several times and rebooted the computer several times too and nothing helps...

  The journal of the computer on the screen, I see written next to my account "Detection drive.."

  plz help me guys I really like this technology and want to get it back...

  Message edited by Nen0uS on 07/12/2009 11:02

  OK, I see what you're saying.

  Remember download Windows updates in this period?  Maybe you downloaded another software because it worked correctly.

  Have you thought about doing a system restore from the date that it worked properly?

  Keep trying and I also!

• Error "the fingerprint reader is not connected. Connect the drive"on Dell Vostro 5470 Windows 8.1 Pro

  Hello!

  I have laptop Dell Vostro 5470, with installed Windows 8.1 Professional 64-bit.

  I installed the driver of fingerprints and DigitalPersona 6.2 update, in a different sequence, but still - the drive is visible in the Device Manager, but NOT visible for the connection of Windows of fingerprints or DigitalPersona.

  I searched and tried various solutions (including fingerprints etc. sensor drivers.).

  Still no luck. And this seems to be a Driver problem Dell (last sensor driver is y2013, and there are a few discussions of the forum still unresolved).

  Hello!

  Yes, we have found a solution! :)

  In fact, the 'problem' was related to group policy Active Directory MS Windows. Logons "Biometrics" and devices could not in group policy.

  If your computer is a member of the field, try this or similar solution:

• Start your computer by using the fingerprint reader is not working - T450s

  It did not help:
  -From the bios feature works...
  -Ability to select in the application "" connection of fingerprints digital use instead of power ".
  -Update the BIOS
  -Updated FingerPrint Manager Pro
  -The placement of the bios 'Legacy First' or 'Legacy' only

  I am grateful for the support.

  You cannot use the fingerprint reader as a replacement for the power button more.

  The former supplier the Authentec fingerprint readers, was bought by Apple some time ago. As a result, Apple holds the respective patents.

• (SimplePass) fingerprint reader does not work or missing? (Windows 8)

  Hey guys,.

  I see many people running on the issues where he fingerprint reader does not work after the upgrade. Most of these problems come from the books that is not supported by Windows 8.

  If you run a question using biometric (fingerprint reader) missing or does not work to all install IT.

   

  

   

  THX

  Hope it will be useful.

  THX

• Realtek 81xx NIC "Cable not connected" with WRT54G2 on Windows Vista

  Hello, I have this weird problem with Realtek 3 different integrated NICs, connect to a WRT54G2 configured as an Access Point.

  I have installed and configured the WRT54G2 without any problems using my computer laptop buildin NIC and wireless adapter, it worked like a charm. However, try to connect two different PC with integrated NIC Realtek 8168 me Gets the problem of "cable not connected". When I click on this cable in to my laptops NIC, it works.

  I've tried everything. In advanced settings, I changed the speed to 10 Mbps, 1000 Mbit and 100Mbit and back to auto. nothing. When I plug the cable in 10Mbit, the lights on the NIC on briefly then darken again. When they do not appear there is a message "unknown network".

  It is not energy saves the settings, I turned them all off. Also any firewall setting is killed on the clients.

  I even bought a cheep * beep * PCI NIC, which has been using a Realtek chip set 81xx; don't turn back, "cable not connected" everywhere.

  I've never seen anything like this. With any other router is most of the configuration work, now, I spent the evening in the hope of seeing the yellow and orange lights flash to appear. This is the way to complicated for no reason.

  Anyone can say anything about it? I think to get to a simple Belkin do the work.

  Have you tried another ethernet cable... Try it.

  Connect to the Linksys configuration Page and reduce the size MTU to 1300 and click on save settings.

  You can also try reducing the map of the computer (NIC) speed to 10 Mbps half duplex / 10 base mode half T/10.

  If the foregoing, all action does not work, try to reset the router for a minute... Check it out now.

• said sensor fingerprint reader is not connected

  I just bought this computer and set up some passwords to fingerprint the other day.  now he says that the scanner is not connected?

  Hi Mounir_casa,

  1. what operating system is installed on the computer?
  2. where do you get the message that scanner is not connected?
  3. What is the brand and model of the scanner?

  Method 1
  I suggest you to run the fixit from the following link:

  Hardware devices do not work or are not detected in Windows
  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Method 2
  I suggest to unplug and reconnect the scanner and check if that helps.

  Method 3
  Update the drivers for the scanner on the manufacturers Web site.

  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-in/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly
  http://Windows.Microsoft.com/en-in/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

• vCenter connects to SQL Server very well with 64-bit DSN, but does not connect with 32-bit DSN

  Created a system DSN 64-bit and 32-bit vCenter server by using SQL Server Native Client 11.0 and exact same settings pointing to the database on a SQL Server 2012 box.  The 64-bit DSN connects very well and the 32-bit DSN fails to connect.  Can someone give some guidance as to what could be the problem?  I have never seen it before.  They are pointing to the same database and use the same local SQL account.

  TIA

  The challenge was to enable the SQL Server Browser service in the SQL box - it is disabled by default in Windows with SQL Server 2012 2012...  This should really be documented by VMWare.

• Samsung tablet driver does not connect with my computer (windows 7)

  Hello I have a Windows 7 right and whenever I connect my Samsung galaxy tablet 3 USB it says device driver software was not successfully installed. I checked the updates, it didn't work, but I check the properties of the device it says error code 10

  Hello jasmine,.

  Thanks for posting your question on the Forum of the Microsoft community.
  1. If it works much earlier? If Yes, did you of significant changes to the computer before this problem?
  2. Have you tried to connect the tablet to another USB port on your computer?
  3. Are you able to connect the tablet to another computer?

  I understand that you get an error code 10 device when you plug your tablet computer. This error is due to some kind of unspecified driver or device problem. In your Windows Device Manager is not able to start the unit due to a driver-specific is not recognized. So, let's try a few steps to start in the right direction, diagnose the root cause and solve your problem.
  Method 1:
  Try to follow the steps described in the following link and check if the problem persists:
  FIX: "this device cannot start" error Code 10 in the Device Manager in Windows

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  Method 2:

  You can also download the Software Kies from Samsung for Windows that allows you to connect your phone to your personal computer, makes it easier for you to synchronize data between the devices.

  Samsung Kies 

  Hope this information is useful. If the problem persists, please post back your results for further assistance, we will be happy to help you.

• HP Probook s 4540: fingerprint reader does not

  Hello

  Problem: fingerprint - Windows journal reader under does not have the ability to connect via the fingerprint reader.

  Overview: after installing the drivers of the fingerprint on the HP site and thanks to the HP protection tools to register successfully to fingerprints, I tried to log in via this method, but the Windows Connect screen does not display this option. Device Manager correctly identifies and shows the fingerprint sensor - however, the Control Panel does no detection of biometric devices.

  I really need help with this problem. Details of what steps I took trying to make the scanner work are given below.

  Specs:

  1) 4540 probook s

  (2) Windows 7 64 bit

  (3) i5 - 3210 m, 1 GB Hd 7650 m, 4 GB at 1333 Mhz, 750 GB 5400 RPM, VFS 491 fingerprint reader.

  Details of the problem and the steps of my work to install the drivers:

  After a new installation of Windows 7, I went on the site of HP driver to download the latest drivers for Probook s 4540:

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=5229457&...

  I installed the drivers in roughly in this order:

  drivers ethernet controller 1) realtek.

  drivers audio 2),

  (3) the chipset and USB 3.0 drivers (but not the Intel MEI driver)

  (4) Intel video driver: a problem such that the pilots were not allowed to install. After you disable switchable graphics in the bios, I was able to get these drivers to install.

  (5) AMD video drivers: installed after graphic driver intel HD - installed but Catalyst Control Center was not displayed. Then I reactivated switchable graphics in the BIOS, re-installed these drivers and CCC was now available.

  (6) support for HP keyboard shortcut

  (7) HP Universal camera driver

  (8) fingerprint sensor fingerprint validity

  (9) Synaptics Touchpad driver

  (10) Atheros wifi & bluetooth

  (11) Jmicron card reader

  After driver installation, I installed the HP protection tools. According to request a reboot of the PC, which I did-, he asked for the setting up security etc... Part of this pocess was the registration of fingerprints - successful. However, log off / restart of windows, an option to connect with the fingerprint reader does not appear in the Windows login screen.

  I open the control panel and found there wasn't that no biometric device only tab, even if the Device Manager showed biometric sensor, device and validity (VFS 491). I then uninstall HP protect tools and driver validity sensor fingerprint, and made sure that these services are running:

  -Credential Manager

  -Remote Procedure Call (RPC)

  DCOM Server process Launcher-

  RPC end point mapper-

  -Windows Biometric Service

  Plug-and-Play

  Then as suggested in another post on the forum, I installed first of all this:http://ftp.hp.com/pub/softpaq/sp55001-55500/sp55109.exe , then the drivers of the validity of 4540 s drivers page, then HP protection tools.

  After the reboot HP protect tools as before to register my fingerprints, but still no windows login prompt came to connect with fingerprints. However, a change after installtion of http://ftp.hp.com/pub/softpaq/sp55001-55500/sp55109.exe that has been in Control Panel it is now a tab for biometric devices. However, it is said that windows did not find it all installed biometric devices. A picture is attached showing the Device Manager and Control Panel!

  Please HP offer a solution. Thank you!

  

  OK problem solved. I don't know if it is related to the HP windows 7 system essential updates driver installation and Intel MEI or not - but I install these.

  What has really worked probably was it - > install the drivers of fingerprint and then the HP protection tools. Once rebooted, open HP tools protect, then return to the administration in the lower right corner-> the administration Console-> increase of security system-> tick windows login security and your done. Now, you will be able to connect through fingerprints registered.

• Fingerprint reader does not react anymore while the software seems to work (Thinkpad E530 Windows 10)

  I used logg in via the reader of fingerprints (windows 10) with no problems, now the fingerprint reader does not react anymore when I pull the finger. I managed to remove all the passwords in the password manager (still not sure about it as I don't really understand how all the components work together) hoping that would solve the problem. Not the fingerprint reader software keeps asking me to register a new finger. Everything seems to work fine (I can pick a finger to be registered, type my password windowns) until I asked me to draw the finger on the fingerprint reader: nothing happens! The indicator that shows how the finger was scanned shows nothing at all. Looks like the software works, but the fingerprint reader itself is dead. However, looking into the information system the "TouchStrip Fingerprint Sensor' (WBF mode advanced) seems to work fine.

  Help, please. I don't have any idea how to find out what's not here.

  Thank you very much for the tip! He works in fact :-). Even if it does not seem logical to me, as I never put it in place a front pin - and fingerprint reader work very well even without PIN code. But who cares - the main thing is it works now! So thanks a lot again :-)!

• Fingerprint reader does not work after the laptop awakens from his sleep.

  Pavilion DV6-6c15nr

  Windows 7 Home Premium

  Fingerprint reader works fine when the computer starts. The drive works fine if I manually lock the system. When the computer enters mode "sleep" through inactivity, then wakes up from his sleep, the fingerprint reader does not work. The player power led does not illuminate, the player does nothing if I drag a registered fingerprint. I must select use authentication information and enter the Windows password. Device Manager says device working properly but it doesn't help. I checked for BIOS, Windows and driver updates but I run in all aspects.

  Hello

  Uninstall the software and current driver for the fingerprint reader.

  Resources:
  Uninstall software in Windows 7

  Uninstall or change a program in Windows 7

  Download and install the latest driver from here.

  Download and install the latest version of the software from here.

• ProBook 640 G1: Hp Probook 640 G1 no fingerprint reader?

  I bought a used HP laptop... I installed Windows Home edition 8.1, and the fingerprint reader does not work. I tried driver install synaptic and the driver of the validity, but does not work. . I got the attention that perhaps tis probook does not have a Fingeprint reader? I could not find in the BIOS and nowhere... (neiher in Device Manager). Maybe I don't have a fingperprint player? I have attached an image, I have this, but it seems that it is not the drive... What do you think?

  

  @jack298

  Sad news, Jack.

  The small covered rectangle indicates where a fingerprint reader would be located if the drive has been installed at the hardware level.

  When you see a post that will help you,

  Who inspires you, gives a cool idea,

  Or you learn something new.

  Click the 'Thumbs Up' on this post.

  My answer-click accept as Solution to help others find answers.

• HP envy: fingerprint reader does not

  the fingerprint reader doesn't work with my

  ENVY of HP TouchSmart m7-j120dx Notebook PC (ENERGY STAR)

  Model #: E8A11UA

  Series No.: [personal information]

  I downloaded the software but still does not

  @mackt123

  The good news: there are 10 HP Windows drivers for your system.  (It is not the case for everyone.)

  If the system has been migrated to Windows 10 (as opposed to the installed computer with W10), while you have installed HP 10 Windows drivers, including the Chipset driver.

  There is an update to the BIOS of your system - which do not install unless you have your computer completely saved, particularly files all critical.  Do not update the BIOS unless / until it's absolutely necessary.  Why hesitate?  BIOS updates may be very beneficial--or they can turn fatal and turn your computer into a large, flat paper weight.

  

  Validity sensor driver:

  File name: sp63418.exe

• HP envy: HP Envy fingerprint reader does not

  Simple pass works well using the password or PIN.  The fingerprint reader does not work. no light help please

  icp_wolverine wrote:

  MAKE SURE THAT THE ATOMIADES SENSOR IS INSTALLED AND REINSTALL HP SIMPLEPASS

  ALSO TRY A HARD RESET IF A STOP OF THE LAPTOP, UNPLUG POWER SUPPLY, BATTERY, BUTTON FOR 10 SECONDS TO TAKE... BATTERY PUT IN PLUG POWER CORD BACK LIGHTS FOR LAPTOP

  Please how do I check if the sensor is installed.  I tried the Hard reset without success. Thank you