Question simple complete Fast Scan index
The following quote belongs to Jonathan Lewis (Index operations |) Oracle scratchpad).
' Index fast full scan: goes to the first block of the segment, and makes close readings through the segment, pick up blocks of branch and leaf, throw branches and using the data in blocks of leaves as if they were tables lean. " Does not return the data in order. »
I wonder, why Index Fast full Scan don't close reading from roots to the leaves of the blocks, if it will ignore the branches? Is it not useless get the segment instead of just the pads of sheets? Because only blocks of leaves are needed for the user.
Concerning
Charlie
NightWing wrote:
Also, can anyone say if Oracle only extract blocks of leaves, does make a lot more effort to get the integer part? Because when she gets only the pads of sheets, one must find blocks of leaves first, then read them. Finding them can be expensive?
Hi Charlie
The method you describe to read all of the blocks of leaves is indeed an optimizer viable path called a Full Index Scan:
http://docs.Oracle.com/CD/E16655_01/server.121/e15858/tgsql_optop.htm#CHDCBBAE
A pointer address of block in the block of leaves is used to find the next block of leaves (or previous) in the structure of the index. It is "expensive" because it cannot be read these leaves blocking block a little bit at a time (and not with large effective close readings as with the IFFS) database and the next sheet block need not be physically sequential for the block of sheets and could be "Nowhere" in the breast of the storage space perhaps even on another file on a completely different physical disk.
So with an IFFS, the cost of reading and ignoring the occasional branch block is far offset with the advantage of being able to perform (perhaps in parallel) much more effective close bed.
See you soon
Richard Foote
http://richardfoote.WordPress.com/
Tags: Database
Similar Questions
-
Win 7 crashing a lot during (online) video streaming for a while now > cannot read properties of Mem (RAM) in ' computer > Properties / group policy fails > can not change the type of user account
HM-built PC:
F2a - 84 M Asus MB
Win 7 Home Premium
ACPI x 64-bit
AMD A4 - 5300 APU x 2
16 GB of RAM DDR3 1333 MHz (4x4Go Patriot PSD38G1333KH)
Graphic OB (Radeon HD Graphics (7480D)
Internet:
DSL ATT Uverse (6dwn/1up) Mbps
Browsers:
Chrome or Firefox (current)
Security:
OS = MS Security Essentials (Virus Defs = current)
PC = MalwareBytes Anti-Malware
Browser = MalwareBytes anti-Exploit
General = system starts and works well, most of the time, but crashes at random, usually in streaming video, but other times, as well
Win Update = Error Msg: "impossible to verify updates because no service not running - restart (does not help)." However, the VICTORY seems to automatically update very well (he just did this week).
PC freezes = while watching NetFlix, other software streaming services (IE FXCM trading station)
Indexing = sometimes, computer is very slow to scan (index?) drive / content folder
Other = I do not know how to read the error or the event logs, the and al., so does not (see below). DSL ATT Uverse Speedtest / test line out above marks paid for. I don't know what "MS fix utility" to try (IE test of memory). C: drive is 3 GB to 500 GB full so cannot move to WIN 10 (maybe it is?) I'm lost...
What else I can share to help?
-Thanks, MC
Hello
Thanks for posting your question on the Microsoft community.
Thank you for details on the issue.
Windows may freeze if multiple programs are running at the same time or if Windows is infected by a virus or malware.
I suggest you to execute the resolution of performance issues and check if that helps.
Reference:
Open the troubleshooter of Performance
http://Windows.Microsoft.com/en-us/Windows7/open-the-performance-TroubleshooterIt checks issues that could slow down the performance of your computer, such as how many users is currently connected to the computer and if multiple programs are running at the same time.
Please also run Microsoft safety scanner to check and remove any viruses or malware that may cause the problem.
Reference:
Microsoft safety scanner
http://www.Microsoft.com/security/scanner/en-us/default.aspxNote: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.
I hope this information helps.
Please let us know if you need more help.
Thank you
-
Duplex charger HP 8620 document Mac error - 'the scanner could not complete the scan.
Hello
When the analysis attempted double helped since the document feeder, I get the following error:
the scanner was unable to complete the scan
If I don't select duplex option, the printer scans very well. I really need the duplex feature was that the printer was purchased for.
I uninstalled the printer, reset and all that gubbins.
my setup is the following, configure the printer as wireless on mac osx mavericks last generation last drivers/HP utility. Ipgraded for the latest firmware of the printer also. all without success, and now support is not open until Monday
For more information on this...
So I think that I managed to fix it. Different solutions etc. then forums all about I thought I would include it here. This is the steps that I found to work for Mac OS x 10.9.
I need to follow the steps:
- Remove the power cable while the printer is turned on wait about 15 seconds and plug it in again.
- When the installation of the printer using the selection HP not the Airprint, which is added by default on Mac OS x 10.9 - capture screen attached and operating.
If everything is working great and then if not go to step 3.
- If the printer is already installed with AirPrint go to the printer main & scanners, right click in the box on the left where you printer is displayed and click on reset printing system. -This will remove all printers found here also.
- Download of the latest version of the software for your operating system
- Install the software, restart the computer.
- Download the latest firmware, if it is available for your printer
- Add your printer and follow the steps 1 & 2. It should work and allows you to copy double-sided.
Don't know if this is a limitation of the software or drivers but ADF allows up to 300 dpi, as the manual scanner allows all the way up to 1200 dpi.
See you soon
Ed
-
I was surfing on the internet and a message from the address above indicating that I got the virus and avast! came and said I could update my account. I have virus checked with McAfee, MAlware, Avast!, and MS and all say that I am very well. I have not download or request this antivirus-eee-2011 etc and is not in my hardware announcements. I can it safely remove? Should I shut down my computer? He told me that if I shut my computer down it will crash. Help... What should I do? Thank you
* original title - I received a message saying somewhere that is antivirus-eee-2011.ce.ms/fast.scan and that my computer is infected. I ran three scans which tell me that my comouter is fine. What should I do? *
Web site: antivirus-eee-2011.ce.ms/fast.scan downloads a fake antivirus on your system, because you have not downloaded the file you should be fine and your computer should not crash if you stop (this is just alarmist tactical use of the fake antivirus developers)
-
HP OfficeJet 6700: Could not complete the scan
I used this Toshiba Satellite P55W-C laptop sucessfully for scanning and printing since I was 6 months ago and had a very easy installation. They are entirely compatible.
Printing now works fine.
I was in the Middle I digitizes a 7 page paper on the feedbed in TIF format, (which I did successfully several times before) when he leaves the analysis. I had to pull the output printer page.
I could click on new scan and go to the properties of a couple of times, but it is not yet complete the scan.
Now as soon as I click on "new scan" I get a pop up window that says "unable to complete scan.
I am able to complete the scan with my laptop HP G72 5 year (after the start of an hour of time), this scanner is fine.
What happened to my computer?
Hello and thanks for trying to help.
They were always connected wireless.
I does not solve the problem, after having paid Best Buys Geek Squad $100 to register for a program.
It remote access to my computer. He had to remove all the drivers for my printer and then reloaded them and it worked fine. I thought I had done this, but all I did was to remove the printer from the list of printers and devices. I had not actually entered in the list of programs and deleted all the driver and related information.
I hope this can help someone else.
-
Hello
I'm stuck with a question simple css-
I need to display some text below the other strings:
Text1
Text2
Text3
I use jspx:
< af:panelGroupLayout layout = "vertical" >
< af:panelGroupLayout >
< af:outputText value = "text1" / >
< / af:panelGroupLayout >
< af:panelGroupLayout >
< af:outputText value = "text2" / >
< / af:panelGroupLayout >
< af:panelGroupLayout >
< af:outputText value = "Text3" / >
< / af:panelGroupLayout >
< / af:panelGroupLayout >
well, I receive the channels displayed vertically.
but I need them to the right of the screen-
so I use the style class:
{.textClass}
float: right;
}
and adding in all three group layout in the hope that the three strings to shift right-
< af:panelGroupLayout layout = "vertical" >
< af:panelGroupLayout >
< af:outputText value = "text1" styleClass = "textClass" / >
< / af:panelGroupLayout >
< af:panelGroupLayout >
< af:outputText value = "text2" styleClass = "textClass" / >
< / af:panelGroupLayout >
< af:panelGroupLayout >
< af:outputText value = "Text3" styleClass = "textClass" / >
< / af:panelGroupLayout >
< / af:panelGroupLayout >
they go right, but they are now displayed on one line:
text3text2text1
what I wanted was-
-------------------------text1
-------------------------text2
-------------------------text3
Please suggest.
Thank you.Why so complicated?
the round is played.
Timo
-
Hello
Please help me understand why full scan limited index that happens in the following query:
Even if chargeid is not where clause of the query performs index FFS on NBFC_xyz_PK. Also, what is "index$ _join$ _001?SQL> select * from v$version; BANNER ---------------------------------------------------------------- Oracle Database 10g Enterprise Edition Release 10.2.0.2.0 - 64bi PL/SQL Release 10.2.0.2.0 - Production CORE 10.2.0.2.0 Production TNS for Solaris: Version 10.2.0.2.0 - Production NLSRTL Version 10.2.0.2.0 - Production explain plan for SELECT CHARGEID FROM xyz WHERE CHARGECODEID in(2,29); Explained. ---------------------------------------------------------------------------------------------- | Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time | ---------------------------------------------------------------------------------------------- | 0 | SELECT STATEMENT | | 2 | 18 | 2 (50)| 00:00:01 | |* 1 | VIEW | index$_join$_001 | 2 | 18 | 2 (50)| 00:00:01 | |* 2 | HASH JOIN | | | | | | | 3 | INLIST ITERATOR | | | | | | |* 4 | INDEX RANGE SCAN | xyz_IDX1 | 2 | 18 | 2 (0)| 00:00:01 | | 5 | INDEX FAST FULL SCAN| NBFC_xyz_PK | 2 | 18 | 1 (0)| 00:00:01 | ---------------------------------------------------------------------------------------------- Predicate Information (identified by operation id): --------------------------------------------------- 1 - filter("CHARGECODEID"=2 OR "CHARGECODEID"=29) 2 - access(ROWID=ROWID) 4 - access("CHARGECODEID"=2 OR "CHARGECODEID"=29) COLUMN_NAME DATA_TYPE NUM_DISTINCT NUM_NULLS DENSITY HISTOGRAM ------------------------------ ------------------------------ ------------ ---------- ---------- --------------- CHARGECODEID NUMBER 241 0 .004149378 NONE CHARGEID NUMBER 296 0 .003378378 NONE INDEX_NAME COLUMN_NAME COLUMN_POSITION ------------------------------ ------------------------------ --------------- NBFC_xyz_PK CHARGEID 1 xyz_IDX1 CHARGECODEID 1 xyz_IDX1 TXNTYPE 2 xyz_IDX1 MODULEID 3 xyz_IDX1 VALIDTILLDATE 4 SQL> show parameter optimizer NAME TYPE VALUE ------------------------------------ ----------- ------------------------------ optimizer_dynamic_sampling integer 2 optimizer_features_enable string 10.2.0.2 optimizer_index_caching integer 0 optimizer_index_cost_adj integer 100 optimizer_mode string ALL_ROWS optimizer_secure_view_merging boolean TRUE
Kind regards
Published by: santi January 5, 2012 04:04Hi Santi
Rather than read the index and the ROWID can visit the table, the CBO has decided it's cheaper to do:
Get all the ROWID of the index xyz_IDX1 on the CHARGECODEID column via a scan interval for two values of interest (2.29)
Get all the ROWID for all entries using the Index Index fast Full Scan on the NBFC_xyz_PK index on the CHARGEID column (as this is the only column to select)
Do a hash join to determine what ROWID exists between these two indices.
The index view $ _join$ _001 is the result of this hash join, which allows to extract only CHARGEID values that are of interest.
All necessary information can be obtained from these 2 indices and so avoided visits to the table. A column should not be in the WHERE clause of an index to consider.
See you soon
Richard Foote
http://richardfoote.WordPress.com/ -
WARNING: MATLAB user here.
Note: This is a question of LabVIEW, not a matter of MathScript. I just use MathScript to demonstrate the point.
This is background to the particular question.
In MATLAB if you want to calculate decent efficiency then you want previously declared tables and want the built-in functions.
This means that it's slow:
ICT
for i = 1: 10000
ENTRIES = rand;
end
T1 = toc
(t1 = 0.266, so 37.6 elements/MS)
and it's faster
% start before the next loop, but not copy - paste with it because it slows down it waaaay
Claire x
ICT
x = Zeros (10000,1); % If not the ', 1' and then it overflows of memory to MathScript
for i = 1: 10000
ENTRIES = rand;
end
T2 = toc
(t2 = 0.205, items so 48.8/MS)
In MathScript, it is an improvement of 23% at run time.
ratio = 100 *(t2-t1)/t1
(ratio = - 23.3)
When I use LabVIEW for the same thing, I get:
which leads to a computation time of 269 ms for about 10 000 000 elements in a vector. (Note that this is literally ~ 1000 x faster than MathScript). He created elements of k ~ 37 per millisecond.
If I change out for a created matrix indexing, then the time is strange.
When I run it for 10 elements of k, or about 1000 times less, then he finished in approximately 30ms, or approximately 333 items per millisecond.
When I run it for 100 k items, or about 10 x more last run and 100 x less than the previous vi, and then it ended with about 5000 ms, or approximately 20 items per millisecond.
The best construction and replace it is running hundreds of times slower, and it is perhaps running ~ 1800 x slower.
Here's my problem:
One of these things is 1800 x slower than others. Why is it reasonable? Why is-111 x reasonable? Here are the simple changes.
I love that LabVIEW is literally 1000 x faster than MatLab in certain tasks. I need to understand why, in some cases this multiplier 1000 x falls down to a 2. 4 x DECREASE. Intuition I have is not only wrong, it's incredibly bad. He's wasting the 1000 x multiplier of speed that I am very happy with.
My thought:
If I did it in assembler to nickname the first loop is as follows.
I point to the stack, call the random number generator to get a value on the stack, incrementing my counter, check if it's 10 million, update my pointer location and iterate.
The second loop would be as follows:
Point battery, I write a zero, incrementing my counter, test whether it is 10 million, update my pointer location and iterate.
then
I will return to the beginning of the location of the stack, call the generator of random numbers to get a value on the stack, incrementing my counter, check if it's 10 million, update my pointer location and iterate.
The report of the runtime for loops would be the time difference of calculation-writing-increment of a (pseudo) random number and THEN a zero against writing incrementing from zero. I expect it to be somewhere between 2 x and 10 x.
There are BONES. Perhaps the algorithm to calculate a random number has many steps, like thousands. Here is the difference between On-die, L2, RAM and disk. Given enough items I would expect things to have to go through the bottlenecks and get slow.
You have to shift registers when using him in place element structure. I don't know why, but it is much faster (and a more exact comparison) when you use the shift register.
-
Unable to complete virus scanning - unexpected errors
original title: when I run a virus scan, the analysis is choking (unexpected error) on the Windows/system32/NIsLexicon003e.dll file.
I need this file? The system does not appear to want me to remove it, even in safe mode. Can I edit, delete or somehow fix it?
Hello
Couldn't find this name on Google, it is spelled correctly? Could be malware.
Right click on it - properties - Details tab you can determine the author? Is legitimate?
The reason that you can not remove it is that's probably because it loads at startup.
=========================================================
If you need search malware here's my recommendations - they will allow you to
scrutiny and the withdrawal without ending up with a load of spyware programs running
resident who can cause as many questions as the malware and may be more difficult to detect as the
cause.No one program cannot be used to detect and remove any malware. Added that often easy
to detect malicious software often comes with a much harder to detect and remove the payload. Then
its best to be thorough than paying the high price later now too. Check with them to one
extreme overkill point and then run the cleaning only when you are sure that the system is clean.It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
the regular windows when you can.Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
(If Rootkits run UnHackMe)Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
Malwarebytes - free
http://www.Malwarebytes.org/Run the malware removal tool from Microsoft
Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.
You should get this tool and its updates via Windows updates - if necessary, you can
Download it here.Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
(Then run MRT as shown above.)Microsoft Malicious - 32-bit removal tool
http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=enMicrosoft Malicious removal tool - 64 bit
http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=enalso install Prevx to be sure that it is all gone.
Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
Prevx - Home - free - small, fast, exceptional CLOUD protection, working with others
security programs. It is a single scanner, VERY EFFICIENT, if it finds something to come back
here or use Google to see how to remove.
http://www.prevx.com/ <-->-->
http://info.prevx.com/downloadcsi.asp <-->-->Choice of PCmag editor - Prevx-
http://www.PCMag.com/Article2/0, 2817,2346862,00.aspTry the demo version of Hitman Pro:
Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
(viruses, Trojans, rootkits, etc.). who infected your computer despite safe
what you have done (such as antivirus, firewall, etc.).
http://www.SurfRight.nl/en/hitmanpro--------------------------------------------------------
If necessary here are some free online scanners to help the
http://www.eset.com/onlinescan/
New Vista and Windows 7 version
http://OneCare.live.com/site/en-us/Center/whatsnew.htmOriginal version
http://OneCare.live.com/site/en-us/default.htmhttp://www.Kaspersky.com/virusscanner
Other tests free online
http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1--------------------------------------------------------
Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing
system files.Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup
Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
RUN AS ADMINEnter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker
(SFC.exe) program generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html-----------------------------------------------------------------------
If we find Rootkits use this thread and other suggestions. (Run UnHackMe)
I hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
MSE does not complete its scan - blue screen of death
my laptop has been running and playing pandora through chrome. I came back to it and saw a blue screen of death. immediately, I restarted and opened the MSE. went to "Refresh" for the latest definitions. ran the scan. at about 99% completion, the machine restarts and says windows (I'm using win 7 pro) is not stopped correctly. I start again normally and try to re-run the MSE. same thing happens to about 99% scanned, it restarts and says the same thing all over again. I noticed that my MSE changes color at the top of the screen to yellowish and said that your computer is not protected.
Help, please. Thank you, Steve * address email is removed from the privacy *.
Moved from the center of Community Participation.
Hello
- What is the exact and full blue screen of death error?
- Do you have other security software installed on the computer? You have installed don the computer registry cleaners?
If you have another antivirus software installed, then the most likely reason for this problem is that you have installed entirely or partially on the PC security software conflict. Remove all other computer security software. You may need to use a cleaning tool to remove your previous security software.
Also, make sure that the PC clock and calendar are correct.
If this isn't the case, then you will have to uninstall/reinstall MSE.
You should be able to remove MSE of the control panel. Uninstall problems see: http://answers.microsoft.com/en-us/protect/forum/protect_start/uninstalling-mse/a63b8c4b-58ed-437e-8086-fa08d80725a4
It is best if you restart the computer to make sure that uninstall is finished.
You can download a new Installation of MSE file from http://www.microsoft.com/en-us/download/details.aspx?id=5201
Please return to the State of the question.
-
Query not using Full Scan Index
Hello world
I'm on 11.2.0.3.0 AIX 6.1.
There is a query such as:
Select: sys_b_0 | Count (distinct (column_name)) table;
that goes for the analysis full table. The column was values separate only 104 with not NULL values. To save memory buffer gets, I created an index on the table with the column used in the query (i.e. whose distinct values are recovered).
The problem is that even after the creation of indexes and force the flag index that it does not use the full scan of the index. The provided indication is correct in syntax and was the only clue in the query, so there is no question of conflicts with others.
Can anyone suggest me what I might be missing?
Thank you
It seems to me that if print_branch_code is defined as nullable in the table. If this is the case, the optimizer goes for a sweep of index, even if there is no real NULL values
-
Wait signal generator complete the scan list before sending the next command
I am writing a program for Agilent E4421B signal generator scan to list between a range of frequencies (ramp up to the maximum frequency and then back down to the original frequency) specified. The signal generator has only a list of 401 points, which is a problem when I want to wash over a wide frequency range. To work around this problem, I would like to perform several scans of list in a row. However, I can't figure out an effective way to "say" the program to wait until the previous scan has finished before sending a new order of scanning for the signal generator. Any ideas? For reference, I use Agilent ESG drivers series LabVIEW.
Thank you!
If you use standard VISA calls, I would say just that send the scan command, but add; * mutual fund? (operation ends?) make a query. Then, run a VISA to read what's coming. This indicates to the device to send a 1 to the output buffer when the scan is complete (or just about any other operation, also). As you are waiting for a response, your computer will wait the amount of time to wait so he could see a response, it is not less, your way with the exact amount of time - no more - to be actually taken.
A few warnings:
(1) make sure that the time-out is longer than the length of most slow scan.
(2) there are variants of the '1' being returned. I saw '1', '01', and even "1.00E + 3" therefore to allocate more than one byte to read."
-
Feel like 110 - question of OSX WiFi SCAN configuration
I added the printer via WPS on the WIRELESS network.
I added the printer on the page "printers & Scan' on 'System Preferences' then click on the 'IP' icon and enter 192.168.1.4, and all is well. Printer doesn't work.
I went to the Web page the printer and configured the IP address to be static. The same as before.
Everything works fine now.
BUT the question is:
How can I add the Scan from the printer part now?
Thank you
Hello
Under Printers Scanners &, click on the Plus sign button and you should immediately see the printer listed as like Hello.
If the printer is not listed as Hello, which can occur because of a configuration of the router or limitation, any support from router Hello (aka. Multicast) and some provided with such support disabled by its default configuration.
Please specify your model and brand of router, so I can try to guide you further.
Shlomi
-
Questions Windows Fax and Scan
Hi all
After modernizing our systems to small business from Windows XP to Windows 7 x 64, we were unable to use the toolkit provided with our printers Canon MF Fax/scanning, we converted in Windows Fax and Scan
So far, it's working fine, but I have three questions that I can't find answers to...
1. when a received fax is deleted, where is he? I can't to the trash, and sometimes, I delete a fax by chance and here to recover, but can't find it
2 can we somehow add a comment/topic to faxes received to allow the best management of incoming messages? Would be really nice if the Inbox can be sorted by sender or subject
3. can you inbox / outbox backed up/archived/export made?
Thank you
Hi Mike,.
Thanks for posting your query in Microsoft Community.
I understand that you have some queries about the Windows Fax & Scan utility. I hope you find the following useful answers.
There is no "deleted items" bin ior recycles n Windows fax and scan, so unless you have a backup system, you cannot recover the deleted documents.
No, you can't add a comment/topic to faxes received to allow the best management of incoming messages.
Ideally, the location of the Inbox of fax is C:\Users\ (username) \Documents\Fax\Inbox.
I would also ask refer you to the following article to understand Windows Fax and Scan.
Receive a fax with Windows Fax and Scan
Fax: Frequently asked questions
Configure your computer to send and receive faxes
Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.
-
Question simple signatures!
Hello team Cisco,
I have a simple question for you to do. Why disable most of default signatures? Have no explanation? Why are obsolete? What signature should I allow and what should I disable?
You could help me, please?
Kind regards
Rodrigo Alves
My thoughts without order.
set to disable by default signatures
a. a few signatures are vulnerabilities that are very old. Signatures would be necessary only in rare cases. Affecting the default signature can save resources to the IPS.
(b) the quality of a signature is perhaps not very high. If the signing is enabled, a large number of false positives generated may be creating frustration for the admin.
I could go on, but I think you get the idea.
What signatures need to be activated?
Signatures that meet your environmental requirements must be enabled. If you are a shop all Windows, you don't need signatures Unix oriented. In addition, you must enable the signatures that match your organizations security policies.
I would start with the signatures of what Cisco has enabled by default. Feel you comfortable alerts, false positives tune and address problems, allow more signatures.
Maybe you are looking for
-
I use XP Professional
-
My X220i tablet started beep 5 break 5 sequence at startup after I turned on BitLocker security chip in windows 8. The computer starts successfully after the beeps every time. This is the sound. starts about 7 second mark. Does anyone know if this me
-
See all on our screen reversed. Someone knows how to solve?
our monitor displays everything on its side. can anyone help?
-
Windows + space is not change language
Hello! For some reason any Windows + space bar stopped to change the language. How to re-enable change language with Windows + space
-
Universal theme, bar navigation - how?
1 thanks to Oracle to https://apex.oracle.com/ut/2nd thanks goes to fac586 for pointing out (in another thread) navigation by tabs at the level two prevents migration as long as the tabs 'parent' exist in the application-So, how to set the left colum