Race alignment problem

Similar Questions

• alignment problem

  Hi, I have an alignment problem with my program. I use two verticalfieldmanager in a horizontalfieldmanager to display two columns. The problem is, according to the Simulator tha I use, the text seems aligned or not. In 9000, there is no problem, because the width of the screen is great. But if I use the 8110, which has a narrower screen, this problem occurs. How can I solve this problem for all simulators? Thank you. My code:

  SerializableAttribute public class DetallesOfertaScreen extends form {}
        
  GestNearController controller;
  Horizontal CustomHorizontalManager;
  VerticalFieldManager campos;
  VerticalFieldManager labels;
  RoundRectVerticalManager contGlobal;
  RoundRectContainer contProyecto;
        
        
        
  public DetallesOfertaScreen (GestNearController controller) {}
            
  This.Controller = controller;

  Cabecera
  setTitle ("Datos cabecera");

  If (Controller.getOfertaActual ()! = null) {}
                
  Campos = new VerticalFieldManager();
  labels = new VerticalFieldManager();
  horizontal = new CustomHorizontalManager();
  contGlobal = new RoundRectVerticalManager();
  contProyecto = new RoundRectContainer();
            
  TAM int = Controller.gettamanoscreen ();
  Fuente1 of police;
  Fuente2 of police;
                
  If {(tam > 320)
  fuente1 = Util.getNewFont (21, Font.BOLD);
  fuente2 = Util.getNewFont (21, Font.PLAIN);
  labels.setFont (fuente1);
  campos.setFont (fuente2);
  }
  ElseIf (tam<>
  fuente1 = Util.getNewFont (15, Font.BOLD);
  fuente2 = Util.getNewFont (15, Font.PLAIN);
  labels.setFont (fuente1);
  campos.setFont (fuente2);
  }
  else {}
  fuente1 = Util.getNewFont (19, Font.BOLD);
  fuente2 = Util.getNewFont (19, Font.PLAIN);
  labels.setFont (fuente1);
  campos.setFont (fuente2);
  }
                
  LabelField labelArea = new LabelField("Área:");
  LabelField labelLinea = new LabelField("Línea:");
  LabelField labelVO = new LabelField("VO:");
  LabelField labelTitulo = new LabelField("Título:");
  LabelField labelCliente = new LabelField("Cliente:");
  LabelField labelFechaOfer = new LabelField ("date offer :");
  LabelField labelFechaCom = new LabelField ("date beginning :");
  LabelField labelFechaPrev = new LabelField ("date Aprobacion :");
  LabelField labelJProy = new LabelField ("Jefe proyecto :"); ")
  LabelField labelMeses = new LabelField("Meses:");
  LabelField labelProbabilidad = new LabelField("Probabilidad:");
  LabelField labelHorasPrev = new LabelField ("Horas Previstas :");
  LabelField labelRevision = new LabelField("Revisión:");
  LabelField labelSector = new LabelField("Sector:");
            
  Offer OfertaDTO = controller.getOfertaActual ();
            
  String FechaCom = oferta.getFechaComienzo ();
  String months = oferta.getMesesNum ();
  String HorasPrev = oferta.getHorasPrev ();
  String revision = oferta.getRevision ();
  VO string = oferta.getVO ();
  String date = oferta.getFechaCreacion ();
  String title = oferta.getTitulo ();
  String client = oferta.getCliente ();
  Sector of strings = oferta.getSector ();
  String line = oferta.getLinea ();
  String domain = oferta.getArea ();
  String JefeProyecto = oferta.getJefeProyecto ();
  String FPrevAprob = oferta.getFechaPrevAprob ();
  String probability = oferta.getProbabilidad ();
            
  LabelField input1 = new LabelField (Area);
  LabelField to input2 = new LabelField (Linea);
  Input3 LabelField = new LabelField (VO);
  Input4 LabelField = new LabelField (title);
  LabelField input5 = new LabelField (client);
  LabelField input6 = new LabelField (FechaCom);
  LabelField input7 = new LabelField (FPrevAprob);
  LabelField input8 = new LabelField (date);
  LabelField input9 = new LabelField (JefeProyecto);
  LabelField input10 = new LabelField (months);
  LabelField input11 = new LabelField (probability);
  LabelField input12 = new LabelField (HorasPrev);
  LabelField input13 = new LabelField (Revision);
  LabelField input14 = new LabelField (Sector);
            
  Añadimos a los contenedores
  labels. Add (labelArea);
  labels. Add (labelLinea);
  labels. Add (labelVO);
  labels. Add (labelTitulo);
  labels. Add (labelCliente);
  Para activar el scroll
  labels. Add (new NullField());
  labels. Add (labelFechaOfer);
  labels. Add (labelFechaCom);
  labels. Add (labelFechaPrev);
  labels. Add (labelJProy);
  labels. Add (labelMeses);
  labels. Add (labelProbabilidad);
  labels. Add (labelHorasPrev);
  labels. Add (labelRevision);
  labels. Add (labelSector);
                
  Campos.Add (INPUT1);
  Campos.Add (INPUT2);
  Campos.Add (INPUT3);
  Campos.Add (INPUT4);
  Campos.Add (input5);
  Campos.Add (input8);
  Campos.Add (input6);
  Campos.Add (input7);
  Campos.Add (INPUT9);
  Campos.Add (input10);
  Campos.Add (input11);
  Campos.Add (input12);
  Campos.Add (input13);
  Campos.Add (input14);
                
                
  horizontal. Add-on (labels);
  horizontal. Add (Campos);
            
  contProyecto.add (horizontal);
  contGlobal.add (contProyecto);
  Add (contGlobal);
            
  }
  else {}
  Dialog.Alert ("invalid offer!");
  }
            
  }

  ...

  With 8110:

  

  Thank you!!

• Weird alignment problem

  I think it might have something to do with my work on a small document - 48 * 48 icon - but maybe not.

  I have some strange alignment problems. I have an arrow head, I try to line up on a tree, and no matter what I do, they refuse to align the death. The alignment buttons don't work, dragging manually won't work - it falls right on 1px on each side where I want.

  Any ideas what's happening? I have no guides that would have an impact on it.

  Make sure you have not align on the pixel grid is activated in the transformation Panel.

  Although, if you prepare the content that will eventually be pixel based, leave this setting on ensures things seem to be crunchy in pixels.

• Inkjet e: 5740 5740 printer does not print color cyan &amp; alignment problem

  Hello

  Recently, I replaced my lights on my P 5740 printer ink cartridge while trying once photograpgh print [6 x 4] & have had nothing more than headaches since.

  The cyan color does not print ink levels indicate that it is used. I cleaned the heads of ink at level 3. I have replaced the ink cartridge & still have the same problem and now the alignment is unsuccessful.

  I'm challenged to begin with technology & this challenge is both frustrating and disappointing that I do not understand what I did right.

  Any suggestions before I have packing the printer & return to Staples?

  Thank you

  HI @RC23,

  Because the printer is only a couple of months I suggest to HP customer care and ask about a replacement printer. Most likely, it is a matter of ink system, since you've already tried another cartridge with the same results. Check the model number and the form to receive a file number for faster assistance.

  Thank you!

• HP D4360 printer - alignment problem?

  My watch of the half cut letters (upper half), Headline is not yet printed on the page, a clear text than the rest of the text,

  white line crosses SOME of the lines of text, page #s top (right) not printed.

  Note: I have a new cartridge it works fine.

  Note: I had a paper jam the other day, out of paper on the other side (did not know that I should open a backdoor to do). But, I

  think I got an OK impression after that happened.  Today, printing problems. Help please!

  It's sunshyn2005 - thank you for your information. In fact, it is not a matter of color.  It was really the alignment.  I received instruction from someone on the spot - to go to start/printers-devices/preferences/services/then click the ALIGNMENT tab, which produced a sheet printed diagnostic, I then completed in the screen.  Had to re - align 3 times to get it perfect, but it worked.

  Thanks for your suggestion, the page that came on the colors and other things I have bookmark for playback if/when other problems arise.

  Thanks for your comments.

  TriciaJoy

• Boolean text alignment problem

  Hello

  I use "propertyosition:Left" to line up my file names. Unfortunately, file names do not align vertically to the first "Choose file" button, especially when the length of the file names is different. If you press "Esc" in the menu "Select a file" and then "select a file" is pressed in the 'main Menu', file names are aligned now. I don't know why? Any help will be appreciated.

  First, run 'Main Menu' then 'Create a file' and then ' Select a File. " Please create files in the folder "C:\Test". Six files can be displayed.

  Steve

  John wrote:

  Hello

  Have you tried to delete a single file and add another file with different length of the file name? I'm sorry, what is your way on 'text version' on the properties?

  Thank you

  Steve

  Your problem is that you have locked the text and the default justification is out in all your buttons.  Correction is attached.

  (Just try this in "Select a File_Test.vi"):

  1. make all your buttons visible

  2. "text version" (as someone said - just right-click on the text and select "Text Version" - this to all buttons)

  3. Select all text, and set the left justification

  4. make all the invisible buttons

  It's everything he needed...

  -DP

• Alignment problem Date 6i Oracle report in Arabic Windows 7 (Professional)

  Hello

  6i Oracle form and report work very well under windows 7, but we are facing problems with Arabic alignment (Date of the Hijra). like his appear 21/11/1431 and we would like to show 21/11/1431.

  Report 6i, we can change the format, but we have hundreds of reports. and same report another excellent work up to version 5.3

  Pleae help

  Thank you

  Contact the Oracle Support for assistance. ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Alignment problem page &amp; ink cartridge

  I have a HP Officejet Pro 8000 Wireless printer.  Recently I have had several problems with it - from flashing lights saying there is a paper jam, but nothing was ever found.  That seemed to fix and now I have problems with the printer will print an alignment page after EACH print job.  I have cleaned the print heads, installed new cartridges, print diagnostic pages, etc.  The only "issue" on the reports seems to say that the health of the printhead to the status of magenta/cyan is monitor vs a good status on the yellow/black.  After that I cleaned the printheads (for the second time) I went through the steps intermediate and advanced also.  After the intermediary seems to show the magenta printing, but after the Advanced setting, she showed no magenta.  I tried to verify that there is no break in the tubes...  Has anyone else had this / these problems and how to correct you?  Thanks for any help!

  I am betting that it could be a problem with the Magenta/Cyan Printhead. Follow the steps outlined in the document below to try a clear problem. You can ignore the Solution 2, since it's just cleaning and which does not appear to have contributed. If the steps in the document do not resolve the problem, replace the printhead of problem.

  Alignment printed before each print job page

• IP 7220 alignment problem

  I'm running with windows and an ip7220 printer.  This printer was sent, by cannon, 2 years ago (part of which is quoted below - last paragraph), as a replacement for another printer Canon (ip4920) that had gone wrong.  This printer don't work never really at the height but, now its going to be replaced.  The problem is quite simple.  When you print the thing checkprinthead the top black vertical lines are not strong but are two teeny black lines.  This effects all feel so photo eventually stained.

  I took the print head and cleaned nothing doesn't.  I cleaned it by washing it and then put it in a bath ultrasonic until the cleaner media (hot water) ran clear.  This is usually the case but, in this case, it made absolutely no difference and nothing has changed.   I ran all programs maintenance several times without success.  This thing will be all simply do not align properly and the black parts of the alignment process are all stained and never reach any type of solution regardless of the parameters bar none.

  (Mod Note: serial number removed as directed by forum), has been shipped via UPS. This is a replacement for your Canon  (Mod Note: serial number deleted according to the forum).

  Thoughts?

  I did everything I could, but just simply omitted.    I bought another printer that continue.   Thanks for the reply!

• Cartridge alignment problem Officejet 6110xi

  Installed the new cartridge. Printer wants to align. Get the message 'paper too narrow. " Using same paper I used forever. Help, please.

  Hi DenBon,

  I see that you have a problem with an error "the paper is too narrow" on the printer.

  Please make sure you have the printer power cable connected directly to a wall outlet and not a bar/power strip. Here is a document that uses a LaserJet printer for example, but it is intended for HP products in general. Please click the link which explains the problems when connected to an uninterruptible power supply/Strip/surge protector power.

  I have also found a document that deals with one "Paper Mismatch", or "Paper Size Mismatch" Error Message displays when printing.

  If troubleshooting doesn't help not solve your problem, then I would say call the HP Technical Support to see all the other possibilities for you. If you call in North America, the number is 1-800-474-6836 and for all other regions, please click here: click here.

  Thanks for your time.

• Photosmart 7510 alignment problem

  Hello

  I'm having a problem with my photosmart 7510.

  The screen an error alignment and the alignment and cleaning do not work.

  Is there something else to do? or should I buy a new printer?

  Thank you

  I called HP support 1-800-474-6836 and spent a few hours with their support to the execution of diagnostic tests.

  They recommended a replacement of the printer because basic troubleshooting has not helped.

  We power off of the pritner (power disconnected) and held the power button for 30 seconds.

  power turned back and removed printer cartridges and printerhead. Clean any electronic contact with a cloth and put back them.

  Also replace photo cartridge that was less than 30%.

  The alignment is still not.

• HP Color LaserJet CP1518ni - color alignment problem

  I'm having a problem with the alignment of different colors with my HP CP1518ni printer. Essentially colors don't print really in the same place, as the impression of Red (Magenta) is never aligned with black / yellow / Blue (Cyan) (so I can have the text in red with a black text shadow 0.5 to 1 mm below or blue with a red shadow of 0.5 to 1 mm at the top for example).

  Troubleshooting always just irritates me to calibrate, but I have many, many times over many months, calibrated and it does not help.

  Does anyone know of other solutions? Or should I buy a new Magenta cartridge and see what happens?

  My cartridges are:

  Magenta - CB543a

  Cyan - CB541a

  Yellow - CB542a

  Black - CB540a

  Make sure that you update to the latest Firmware.   HP recently released a newer version which helped with a more concise calibration with the alignment of color plan.   Many people have reported these problems solved after running the update.

  Update XP (English) can be found here:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=228&LC=en&cc=us&DLC=en&sw_lang=&product=3422472#N841

• Paper alignment problem 710e HP Officejet 6500 has

  Having a problem where the printer is to cut the top 1/8 "out of all the copies and printed pages. Does anyone have a solution for this problem?

  You could try to do a print head alignment, but I don't know if that will fix it. You can find it by going to the printer settings. Then, look under Tools, and you should see align the print heads. In case this doesn't work, I'll send you a few steps to try via private message. Let me know what happens.

• F2210 alignment problem

  When I tried to align my NEW cartridge, my 2210 would print the alignment page, but it would NOT scan the alignment page. When I pressed the button scan unit, he would turn off the device or just simply fail to scan.  I downloaded and used the scanning HP SW - device TESTS OK DR. Still wouldn't scan the alignment page.

  After spending an hour searching through this forum, I'm frustrated and decided I would fix it myself.  First of all, I slapped the side of the unit where the buttons. Did not work. Then I gathered the face out of the box of buttons. (It is held in place by a magnet (or at least it appears that way) attempted to revive the analysis...) FINALLY! NOW I can use my camera to start a new search.

  Previously, if the alignment page wouldn't analyze, the HP sw Solutions would NOT allow you to go further because he wanted to still the alignment must be completed.

  In any case, my camera is NOW show as READY! Thanks for NOTHING HP.  The NEXT TIME I buy a device from another MANUFACTURER.

  HP, quit smoking by using CHINESE manufacturers! THE manufacturers of the USA! Sooner or later, the money you save to help Chinese manufacturers will be lost because of your customers to choose products from OTHER manufacturers.

  In my case, it has NOT analyzed as a normal doc. It would NOT the scanner. U pushed the scan button and NOTHING would happen.

  I tried scanning directly from the Toolbox - worked FINE. But when the printer was in the middle of the alignment process, he would NOT go to the Toolbox for analysis.  Pressing the Scan button would either turn off the printer completely or it would be flash, don't give ANY error.

  Cancel the process by using the Windows Task Manager is the ONLY way I could get out the alignment process.

  PS - as stated in a response to the second position, since cleaning the contacts, I had NO problem and always use the product.

  At the time of my original post, I TRIED to print an essay which was to this day here so I don't have the time to fool around. Where my frustration.

• Vertical alignment problems HP Photosmart D110a on A5 paper

  Hello, I would like to know if someone could help me with this question:

  I have problems of vertical alignment to print on A5 paper on the photosmart d110a.

  Printing of text will leave 10 cm from edge of paper even though I have no room to set up.

  I use Mac OS X 10.8.3 on a Mac Book Pro with the retina display.

  Clues?

  Thank you very much!

  Leandro

  I recommend you to install the driver of HP, if available for your version of Mac OS X. You will need to install the driver of AirPrint and sometimes the HP driver work better than AirPrint.