Re: Problems in my new laptop A200 27Z

Similar Questions

• HPL2208w of the problems with the new laptop.

  Hello

  I have a 22-inch HPL2208w monitor, which seems to play on my new laptop Dell upward. The laptop has only a HDMI port, so I connect the monitor's vga cable to the Dell via an adapter.

  The display shows for a few minutes and requires only the range (I guess resolution) be changed to 1680 x 1650. For some reason I can't change the setting of the laptop to that. When I do not change the resolution (only if the monitor is unique and not dual output) the warning message remains on the screen and the screen is not at its best (wise clarity).

  Series Dell Win 7 64 bit, but the monitor was working on my previous Dell with the same version of Windows (with a VGA connection).

  Kind regards

  HA9005

  Hello HA9005,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I understand that you are having problems with the resolution on the HP L2208w 22 '' monitor and a Dell laptop. Unfortunately, as the monitor don't has no options that you can change in what concerns the resolution (it is passed by the laptop), I suggest that you try the Dell Forums for an answer.

  I know maybe it's not the answer you are looking for, but at least you know where to look for the answer now. Thanks for posting on the HP Forums. Have a great day!

• Bluetooth problem on my new laptop HP Pavilion G series and really need help!

  I recently bought my new laptop and yesterday when trying to send a picture from my phone to it, files have not been sent, even though she said the phone and the laptop were connected, he mentioned something about Image push, but I am new to HP, so I'm not aware of what exactly is and desperately need help Please could someone help me with this, I would really appreciate that I could not yet send the file via bluetooth. Thanks in advance!

  D3,

  You said,

  "bluetooth device has not been successfully installed.

  You said,

  ""photo from my phone it it was settled, but it says ' unable to connect ' "." "

  I'm a little confused by what you say, but I do not understand 'unable to connect '.

  • It's time to go back to information I sent you and go through the installation program.
  • You can also use the HP connection manager to help you get the job done.

  Here is the Connection Manager software.  Download and install it.  Your computer already has the software, it's going to tell if the package will install...

  HP sp54945 V4.1.25.1 Connection Manager

  Once the software is installed...

  And you want to use the HP Connection Manager software.

  • Make sure that your wireless network is enabled,
  • Then look in your taskbar for your Connection Manager icon and
  • Double-click to start

  If you do not see the icon in the taskbar, you can do the following:

  Start > search / type "HP connect" >

  Click on 'Hp connection manager' when you see it in the start list

  This is a HP Connection Manager Help file.

  The document explains how to use the software to connect your Bluetooth devices (and wireless):

  Connecting to a network with the 4.x connection manager

  Good luck!

  ----------------------------------------------------------------------------------------------------------------

  When you appreciate the effort...

         Please click on the Star Bravo on the left to tell "thank you"! ""

      Is it solved? Make it easier for other people to find the answer:

  Please Mark my Post 'accept as Solution' to say "Yes!"

  Remember: the more information, help, best you , you can receive.

  Always include: (Notebook) product number , printer - model number ,.

  Operating system and a Description of the error

  Never give your serial number

  ----------------------------------------------------------------------------------------------------------------

  2012 the year of the Dragon!

• HP15 AY015TU: Im having a problem with my new laptop keyboard.

  Im having a problem qith the 2 / @ and keys 3 / #. Shift + 2 gives me "instead of @." And shift + 3 gives me symbol £ instead of #.

  Hello

  Looks like you got the ill-defined keyboard layout - IE Uk keyboard for a U.S. keyboard.

  If you have more than one keyboard layout in Windows 10, you can switch between them by keeping the CTRL key and pressing the SHIFT key

  You can also change the layout for your keyboard as shown in the link below.

  Change of keyboard - Windows 8 & 10

  Kind regards

  DP - K

• Re: No sound on my new laptop satellite

  Hello

  you just bought a satellite phone with Vista installed, can't seem to get any sound? Have checked in Device Manager and his works. How can I activate it? What is the problem?

  ALSO view cant You Tube it says JavaScript is disabled, how can I check it please, Vista is new to me.
  Sorry to be a pain, thank you.

  Hi - I too had problems with the new laptop equium L300 bought Currys Canterbury in June. We live in Normandy. It loaded Ok but first use constantly crashed and overheated.

  If it is technical store local (French) computer that seems to have solved the problem. Said laptop OS is Vista Basic on the case, but on the back it is loaded with Vista Premium.

  Memory is 1 GB, which is not enough to run Vista Premium. Also the computer loaded with masses of trial software including any Office suite from Microsoft, MacAfee and Norton and masses of other junk. Shop added two mgs memory and cleaned all the waste and it works fine now.

  Does anyone know if Toshiba 1 year warranty is valid in France on machine bought in the United Kingdom?
  Soon d

• Errors/problems with my brand-new Equium A200 15I (including video material)

  Hello

  I am treated to a new computer laptop last Saturday and only had for about 3 and a half days so far but I noticed a few things that I wasn't sure were errors/defects or if it was simply because its news, like the fact that sometimes I type with the keyboard and some letters do not appear on the screen , I think it's probably more to do with me not type or support pretty strongly on the keys rather than anything else, his is not so much now... the touchpad becomes a bit sticky too and he thinks I want to scroll up and down when I move the cursor does not scroll sometimes but I managed to make it work I think that most laptops have glitches like that and no doubt I could help fix it in calibrating the pad (?) touch I did have time to consider the issue and yet if... There are a few other things well and more disturbing than this morning I got an error of video material, so now im a little just worried or suspicious that it may be a real fault with him and would like to know if it is the case, if its something I can fix eventually (im no expert especially with the material, but I can always try to download and installation of updates / corrections and this kind of thing so she could solve the problems).

  The main thing that concerns me more, is that this morning a message suddenly come to the screen, warning me that there was an error in video material, last night, I clicked on a button, I think for load more information. and I took this perforated cap of it: -.

  http://img528.imageshack.us/img528/724/errorscreencapcw1.jpg

  I thought it may be useful to view the actual complete message rather try everything and paste the info., ok to be honest I've not noticed it allow you to copy to the Clipboard, but good (oops lol).

  I know there is a topic on a similar error, but I didn't want end-to-end on this discussion because I assume that it should be for this mistake of people who will be discussed, mine may be slightly different, I don't know... I followed the instructions given in this discussion and I checked the Device Manager and no material defects are appearing, btw it is said in the Manager of peripheral devices, graphics cards, it's a Mobile Intel 945 GM Express Chipset Family, I'm sure that all laptops A200 15I have the same card, but I thought I would just make it clear that. Incase that wasn't the right thing to check I also checked under "Audio, video and game controllers" (as the error says it was a video hardware error) where it lists the only as being "Realtek High Definition" Audio and I checked the properties, both under properties it says that the device works properly, without signs of defects...

  The thing is, I had read somewhere online that there is a problem with the graphics or video cards. I had read that they can be glitchy and sometimes break after a year. I also asked my father about it and we looked at it as a graphics card Intel that came with this laptop, which it is, and we counted that the Intel chips is as reliable as any other brand really... so I don't think there should be a problem, well that is there I have until September next for repair prior to the expiration of the warranty!

  What surprises or sort of worry, however, is that the error message was only introduced to me this morning. It dates from error, as having occurred at 19:53. I use it at night last, and infact, I went to take a shower and I put the laptop down before you go take a shower at around 19:35, I assumed that its ok just close the lid and it would automatically go into hibernate mode or something similar (?) im wondering if that had something to do with it as I 19:53 would have been about when I came back and lifted the lid/screen again to use the laptop again... I can only assume, given the time, he cites, is what caused the failure?

  It gives me the option to "update driver software" and "hardware change analysis" in the Device Manager, can I run both, or one of those who maybe? is this a common problem? should I worry at all etc...

  Any help is very appreciated, if more info. Please let me know and ill clarify what I can. Also in terms of whats installed, I have quite a few programs, for graphics, I have an old version of Paint Shop Pro, which I installed it yesterday morning, it seems to install fine, it is Jasc Paint Shop Pro 7, I have also some programs of converter (for files vid, 3GP and other things), scan antivirus AVG, Spybot Search & Destory DBPowerAmp, FTP Commander, Quicktime and Real Player, pretty basic stuff like that, nothing, just my old photos and vid files I transferred from my old laptop XP to it, in my documents... I don't have all the Senior Games motorized or complicated or anything else like that installed. Also at that time, indicates the video hardware error message, everything that was in progress when I got the cover down (or before putting the lid down) would have been Windows Live Messenger (although I'm pretty sure that I registered before putting the lid down) and an IE window , im pretty sure that's it, I was not working on anything just check the ' net...

  There are other things I noticed as I thought that maybe I should mention (?), something I've noticed he's doing is the screen goes blank and then back very quickly, a lot. I already asked about it a day or so there at that time, I realized he was only doing that before loading the "Windows needs your permission to continue" window/message, who apparently its supposed to do and something to with the computer to switch to display the normal desktop to the secure desktop, I kind of understand lol.
  So I think that's not something to worry about but I noticed during the lastday, that the screen seems to do it more, goes blank then back again, even if the authorization message does not appear.

  For example, this morning, when I first put on and am went to check out my home page, I clicked on a link at the bottom of the page or anywhere where to load another page into the site and display deleted for a while before coming back a second later with the requested page. Is this normal too? or an associated Vista glitch, or is it possible that there may be a small problem with the monitor? Incase of im guessing it can be more than one thing in Vista, but I thought I would ask here, I decided to not pay for any extra insurance/warranty extension because I am very careful with my items and take care of them and so I'm being careful to try to spot defects early, while they may be repairable under the basic warranty and what-not...

  Another thing I noticed is that start with, when I pressed on and kept the 'FN' key, a variety of icons, black and white appeared on the screen that told me what F button (s) to use to make certain adjustments, there still is that when I try right now, but at other times, it does not show icons , no matter how long I hold down the "fn". That didn't matter because I can tell by the symbols on the keyboard press what buttons but its just inconsistent, is there a reason why sometimes the row of icons on the screen will appear when I press and hold the "FN" key and other times it doesn't show at all?

  Also sometimes if I move the slider to the right to the top of the screen, these icons loading as they always seem to be located at the top of the screen, but sometimes it's a problem, if im trying to click on something else and one of these icons rises instead... I'm sure that you can disable this option in sort , but I'd be worried that the icons do not always show when I press and hold the right Button (?) just try to be careful!

  I think that this post is long enough and I don't see what else I could possibly add to help, so I'll leave this here. I don't want to sound too paranoid, but thought it is better to talk about this kind of things incase someone recognizes these defects/errors and can recommend a way fast to resolve potential problems before they can develop into what whether it is worse... Thank you very much in advance for any help on any of these issues!

  (mods let me know if im wrong to include so many things in a subject, I fact kind of this quickly and I apologize if im breaking any rules, I don't want to, if possible please break this into a few different themes or I can do it, although ill be at work frm 2-21:00 today so maybe not back and able to check here until Thursday morning (October 4))

  Hey Isla

  Your message is really very, very long. I think it's too long to read twice ;) s

  . Regarding your questions on this laptop well. Looks like you have installed many applications and 3 third party programs. In such cases, it s not easy to say if these problems are software or hardware related. But I guess that its software.

  I checked your screenshot pic, but I've never seen this error message. But it looks like something wrong with the graphics driver. The message says something, live events of kernel
  The core services are required by other parts of the operating system as for example graphics card driver.

  In this case I recommend updating the graphics driver. According to you, this message an Intel GPU. So you can see the Intel page for the driver for the graphics chip compatible.

  With regard to the key issue of the FN;
  The Toshiba FlashCard utility controls the key features of the FN. I read in this forum that this application does not smoothly run and in some cases it causes some issues. The new update should solve the problems. You should check the Toshiba driver page. The utility of FlashCard is a part of the Toshiba value added package.

  So finally a tip more:
  You should always check the updates of Vista on the Microsoft page. This operating system is not perfect and Microsoft releases hotfixes and patches very often

  I hope that it would help a little.

  If necessary just ask for more information :)

  Concerning

• HP ENVY 17-j184na Notebook PC: problems of wireless connection on the new laptop

  I bought a new laptop a few days ago and tried to connect to the network without wire in our apartment for 2 days but nothing helped.

  So far, I did the following steps:

  -Restore the system to factory settings.

  -Powercycled the network.

  -Reset the TCP / IP / catalog Winsock.

  -Checked and changed the stop option.

  -Re-installed and updated all the drivers of network.

  -Started in SafeMode w / networking and still unable to connect.

  -Ran all 3 windows solve problems and the problem of internet connection of HP.

  -Updated the BIOS with the latest version of the driver.

  I created my own personal hotspot using my phone and managed to connect very well, so I think that maybe that's a problem with my laptop to connect to my router, but everything else connects very well.

  I have an ethernet cable connected and has associated with perfectly too.

  My laptop is a HP ENVY 17-j184na Notebook PC and my wifi specifications are

  Manufacturer: Broadcom
  Description: Broadcom BCM4352HMB 802.11ac adapter Wi - Fi 2 x 2
  Driver version: 6.30.223.221
  Physical address: 40-E2-30-BF-F0-0D

  Modems are involved as much as I have the following (my apologies in advance, don't know how it's called technically, but it's the same one as in the photo):
  http://www.broadbandchoices.co.UK/guides/hardware/sky-broadband-routers

  I don't know if that helps, but also sometimes the connection does not appear in my list of connections, but it is very rarely, about 3 - 4 times in the last 2 days.

  If anyone could offer advice that could help I would really appreciate it and if someone needs additional information then please let me know (and possibly let me know how I could get this information).

  Thank you in advance for anything

  Hi all

  Problem has been resolved.

  Just in case someone else has the same problem, if you try to connect to a router and it communicates but don't connect does not then it might be a problem with the frequency to which you are trying to connect.

  In this case, my laptop could connect only to a 5 GHz frequency but my router was capable of a frequency of 2.4 ghz, so he was able to connect to all the rest but not that. (Particularly if you use a hub SKY).

  The problem has now been resolved by buying a wireless adapter card that plugs into the USB port. If you don't need to buy a Please make sure that buy you one with dual band capabilities.

  I hope this helps someone in the future!

  Best regards

• Problem with scanning from the new laptop with Windows 8

  I have a Photosmart C4480 all-in-One printer/scanner/copier.  Since getting my new laptop, I have problems with the analysis feature.  I installed the software CD, and think I have downloaded the drivers for this printer.

  Indicates the serial number found on the bottom: model of regulation SNPRB-0721

  I hope you have a resolution for me.

  Thank you!!!

  I've found a workaround.  If I used Windows software to scan, it works correctly.  It works just not when I use the button on the printer itself.

• HP computer laptop-15-be002tu: display in a new laptop screen problem

  Dear friends,

  I bought a new laptop from hp [hp-15-be002tu]. It is provided with the operating system of back free v.2.

  When I tried to start my laptop by pressing power button there is no display on the screen. But I waited for 5 minutes. The HDD & dvd player work properly.

  But I noticed screen does not work. How can I solve my problem?

  Please give good soggestions to fix my problem

  Thank you all

  Dear friends,

  My display problem has been resolved.                                                                                                                                                                         An HP service technician visited my house [on-site warranty] and inspected my computer hp laptop and found that a video cable from the lcd screen was not correctly set. This is why there is no display on the screen of my computer hp laptop.

  I asked him why he came... It is due to either by transportation [services of e-mail... etc.] or manufacturing unit.

  In any case, my problem has been resolved.

  Thanks for the HP amicable services team

  M.Ganesh kumar

• Error message: CD-ROM DRIVER has a PROBLEM when inserting disk on the new laptop.

  Original title: CD-ROM DRIVE

  tried my new laptop by inserting a disc in the CD-ROM drive and the message... CD-ROM DRIVER has a PROBLEM, I clicked on fix of the problem and still nothing.what can do to solve this problem? This is a brand new laptop

  Hi kempie2011,

  1. What is the number of brand and model of the laptop?

  2. you receive error codes?

  I suggest you try the fix it from the link given below and check if it helps.

  Your CD or DVD drive cannot read or write media

  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  Also read the following article:

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista

  http://support.Microsoft.com/kb/929461

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• I have an Acer Aspire laptop with Windows 7. I have a problem. My "new folder" button does not work.

  I have an Acer Aspire laptop with Windows 7.  I have a problem.  My "new folder" button does not work when I am on a page blank and do a right click on the page I get only breifcase and no new folder option. How can I fix?

  See this thread and respond to Bruce Hagen.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-files/Hi-Im-having-a-problem-creating-folders/621c5cd4-29ac-4549-a80b-4f78fe3917aa

• After plugging in a closed to a new laptop HDD, a window pops up saying: "F: / is not available." Access denied. " Is there a way to solve this problem, or am I out of luck?

  On my last laptop, I got a virus that has corrupted my OS files (Windows XP). I was using a version of Linux to run it, and then I crashed my AC adaptor port, making it essentially useless computer. I now have a 'new' laptop (for about a year now) that works under Windows 7.

  I took possession of files but also address options for sharing and security in my username and I am the administrator.

  The only option I've heard that I have not tried is a command prompt. I'm not familiar with this system, so if there is anything else I can do, I would rather try everything first. If not, I'll settle for anything at this point.

  Thanks a lot for all the suggestions.

  Hello

  You can follow the steps mentioned below in order to resolve the error.

  Method 1:

  Note: Check with the different ports on the computer to reproduce the problem.

  If you use a USB hub, try connecting the USB key directly and check.

  Step 1:

  Tips for solving problems of USB devices

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

  (Applies to Windows 7)

  Refer,

  Install a USB device

  http://Windows.Microsoft.com/en-us/Windows7/install-a-USB-device

   

  Step 2: Check if you have any restrictions for the use of a USB key in the registry and fix them.

  Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  a. Click Start Menu > go to run command and type regedit to open the Registry Editor window open.

  b. expand the folder HKEY_LOCAL_MACHINE, then SYSTEM > CURRENT CONTROL SET > SERVICES > USBstor, located in the left pane.

  c. find the 'Start' in the right pane with the blue icon.

  d. Double click on 'start '. A box labeled "Edit DWORD value" will open.

  e. type '4' in the field 'value data '.

  f. click OK and then close the registry editor.

  g. re, insert the USB key and check.

  Method 2: I also suggest that you scan your computer with the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

   

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Important: During the scan of the hard drive if bad sectors are found, the scanner tries to repair this sector, all available on which data may be lost.

  Hope this information helps. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

• Problem updating to a new laptop

  I just bought a new laptop Asus X550C and out of the box yesterday. It was equipped with Windows 8 and like any new laptop, there also 99 updates that must take place. I tried, I opened the box to update, but it won't do anything. This includes Windows 8 updates, app and windows 8.1 updates. I can't download new applications without making updates and I can't download Windows 8.1 without the updates of Windows 8. My all new laptop is so pretty useless. The update screen would be just load forever until I had to turn it off. (I've been waiting for hours, in order to give him more time won't help) A few times I managed to get to half way through, but a mistake is still being produced. I have tried rebooting to configure the updates that have happened, but I got the message "configuration of the Windows updates failed.

  In other forums, I read to do a system update, which is ironic given that the computer just out the box yesterday... I did it right and was able to download and install all updates of 99, but when I reset it, I got "failed to set up" message again. Who has been here for about an hour now.

  I was not able to take advantage of the new laptop that I bought because it has been in the installation, configuration, or returning from the screens because I got it. The laptop itself is amazing, but the Windows program did bring me sorrow.

  Thanks for any help!

  -Ali

  Edit *.

  Now, he seems to be in an infinite loop of reboot, Setup, omitting and then come back...

  Hi Atheriot,

  Generally, this problem is caused because of third-party or due to corruption or missing files in Windows Update components or programs due to the use of any other web browser by default.

  As a first step, I suggest you to disconnect all other external devices that the mouse connected to your computer and then try to install the updates.

  I would suggest trying the following methods and check if it works for you.

  Method 1:

  Try the steps in the following Microsoft Support article and check if it helps.

  "Configuration of the Windows updates failed. Restoration of the changes. Do not turn off your computer"error when you try to install Windows updates:

  http://support.Microsoft.com/kb/949358/en-us

  Note: try the steps that are applied to Windows 8 only.

  Method 2:

  Put the computer in a clean boot state, and check if the problem persists. This is to check if the problem is caused due to any third party/app program.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7 or Windows 8 / 8.1:
  http://support.Microsoft.com/kb/929135 
  Note: After the boot minimum troubleshooting step, see the "How to reset the computer to start as usual after a clean boot troubleshooting" section in the link provided to return the computer to a Normal startup mode.

  Method 3:

  Set Internet Explorer as your web browser default and check. This is to check if the problem is caused due to any different web browser on your computer.

  See the following article from Microsoft Help to set Internet Explorer as your web browser by default.

  http://Windows.Microsoft.com/en-us/Internet-Explorer/make-IE-default-browser#IE=IE-10

  Please reply with the status of the issue so that we can better help you.

• How to activate an old adobe acrobat computer XI edition from an obsolete laptop to my new laptop? I bought this product for my school, and we can't talk to any clown to rectify the problem, here in New Zealand!

  How to activate an old adobe acrobat computer XI edition from an obsolete laptop to my new laptop? I bought this product for my school, and we can't talk to any clown to rectify the problem, here in New Zealand!

  Install it on your new laptop using your serial number.

  Available downloadable Setup files:

  • Suites and programs: CC 2015 | CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
  • Acrobat: DC, XI, X | Suite X | 9,8 | 9 standard | 8 standard
  • Captivate: 9 | 8 | 7 | 6 | 5.5, 5 | 1
  • Cold Fusion: 11: 10 | 9.0.2 version 9.0.0, 9.0.1, 8.0.1, 8.0.0, 7.0, 6.1, 6.0, 5.0, 4.0
  • Contribute: CS5 | CS4, CS3 | 3,2
  • FrameMaker: 12, 11, 10, 9, 8, 7.2
  • Lightroom: 6.4| 6| 5.7.1| 5 | 4 | 3
  • Photoshop Elements: 14,13,12,11,10 | 9,8,7 win | 8 mac | 7 mac
  • Premiere Elements: 14,13,12,11,10| 9, 8, 7 win | 8 mac | 7 mac

  Download and installation help links Adobe

  Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

• Problem with CS6 installing on the new laptop - 'SN is ok, but your software is probably illegal.

  I have an urgent problem with the Suite Design Standard CS6 installation on the new laptop - comment: "SN is ok, but your software is probably illegal". Software has been disabled on the old laptop. Help, please. Thank you. Marek

  We cannot help with this type of problem on the forums. Serila number questions should be handled by the customer service: Customer Contact