Satellite L10 - windows not only after 2 weeks

Similar Questions

• Satellite L10 - Hotkey.exe error after booting Windows 2000

  I've installed Windows 2000 on my Satellite L10 rather
  XP. After installing the utility Hotkey-I get an Error Message at every boot:

  Hotkey.exe - Entry Point not found
  The procedure entry point WTSUnRegisterSessionNotification could not be loaded into the WTSAPI32.dll dynamic link library.

  Same error Message When you try to manually start the Hotkey.exe.

  How can I solve this problem? The system works, but the
  Keys not.
  Thank you in advance for help!

  P.S.: As I read on the web, this error has nothing to do with the missing operating system XP - maybe the HotKey software does not work with Windows 2000. Where can I get a Hotkey software work for Windows 2000 for Satellite L10?
  I try to find it on the download from Toshiba site, but there is that some drivers for the L10 on Toshiba.com and the European server are only readers for XP :(

  Hi turmeric

  All the drivers, tools, and utilities are designed separately for each operating system. This means that you can not use tools designed for Windows XP Home edition with other operating system. You don't find utilities and tools because your device is not supported for the Windows 2000 operating system.
  I'm sorry.

• Satellite L10 - battery not recognized by Vista MS

  Hello

  I use MS Vista on my Satellite L10 and everything works great except my battery which is not recognized by Vista. There is just an unknown device in my equipment manager. In the section on the homepage Toshiba drivers I couldn't find a driver or other instructions. The MS Hotline told me this isn't their but question Toshibas.

  I hope that this forum is someone who can help me solve the problem. I just want to know if my battery has enough power for 20 minutes or 2 hours and I really hate it if my laptop is suddenly out of power.

  Thanks in advance.
  Christoph

  Hello

  You have installed Vista on the L10?
  Wow I know Satellite L10 is not Vista capable and you should be happy that this OS works without big worries on this Satellite phone.

  However, I recommend the Vista update to the last State, to install the compatible chipset from Intel page.

  But I assume that the BIOS on this laptop is not fully Vista capable that this question therefore appears on the L10.

• Windows not loading after system reboot after installation of the last security update.

  Windows not loading after system reboot after installation of the last security update. Have you tried last known good Configuration, Safe Mode, neither of her works.

  No matter which option to choose, it comes to me to the BIOS boot screen after 5 seconds in loading Windows.

  Running Windows Vista 32 - Bit with SP2 installed system. 2 GB OF RAM. Intel G31 Mobo.

  Dated this February 11, 2010.

  I managed to restore my Windows to previous restore point, using the CD of Vista to start, and then select repair Windows. I hope this helps.

• Satellite L10-194 cannot run after recovery

  Hello! I used my Satellite L10-194 for a few years, and he started to be really slow, I decided to reinstall the system (recover) to make it cleaner and faster.
  I found my recovery of product L10 DVD - ROM, but when I finished the system restore would not start. I tried the recovery for some time, and it does not help. Whenever I try to start the computer, when it goes to load the system it just turns off (I think that it is something like the blue screen flashes for a second).

  I checked the disk file image in advanced mode and HARD, and that's OK. But when I do HDD-> image in advance mode, after it is sometimes a moment when I have access to the command line. After getting "dir C:" I don't see a Windows directory (?), when restarting the computer does not work as usual. I'm doing something wrong?

  I tried another CD of product recovery of the second Toshiba laptop that I have, and it works, it installs Windows but without pilots and things (it's a completely different model from Toshiba). What should I do? I'm not sure if the use of system preinstalled for model is the right idea (and legal)?

  I had some problems with my front L10, and I had to change the motherboard. In service, what they said that they can't find a motherboard identical like that in my L10, so they used some different model. It's maybe the problem of recovery does not work why?

  PS.
  Sorry for my English, please correct me in my errors, to help me improve the language :)

  > I had a few problems with my front L10, and I had to change the motherboard. In service, what they said that they can't find a motherboard identical like that in my L10, so they used some different model. It's maybe the problem of recovery does not work why?

  I think that this is the reason why your laptop does not start after the recovery procedure.
  Seems that the drivers that are part of the image are not compatible with the new motherboard.
  Maybe the driver chipset or make sure you graphics card drivers some worries and windows crashes before starting the system
  Maybe you could star the windows in safe mode. Press F8 just after pressing the power button / stop. Then choose Safe mode.
  In safe mode, uninstall the chipset driver and the graphics driver and then try to start it again.

  If that does not help, then install windows using a clean Microsoft CD.
  Pilots should be placed on the page of European driver of Toshiba.

  welcome them

• Satellite A50 does not work after BIOS update

  Hi all
  I tried to Flash my BIOS through windows such as recommended on my website of the manufacturer of the laptop (Toshiba). I guess that the process was not as after only 2 hours still "don't interrupt" message displayed. I had to force power off of my PC. Now it is not initialized.
  The Laptio is Toshiba SA50-114, series of satellites. Model n - PSA50E

  I tried the suggestions in the following link
  http://askiris.Toshiba.com/ToshibaSu...200%2035586212
  However, it did not work.

  However, I don't have the disk recovery and file/ROM BIOS tool. Have tried to search on the internet, but without any result.

  Can someone help me please
  1. How can I update the BIOS to get my PC to running back.

  2. to turn towards links where I can find the files in the link above.

  Thanks in advance.
  Best regards
  Parag

  > 1. How can I update the BIOS to get my PC to running back.
  Not possible if your ROM BIOS module was bad flashed.
  If you are a lucky man only the ROM module must be flashed again using a special procedure. But this can be done by a service provider authorized in your country.

  > 2. Point me to the links where I can find the files in the link above.
  There is no link! You need to ask to help ASP.

  Good bye

• Satellite L10 - could not get the wireless operation

  Hello

  I reformatted my Satellite L10 and managed to pull the best of drivers to use, but I can't seem to get the wireless working.

  I installed the Realtek driver http://aps2.toshiba-tro.de/wlan/?page=downloads

  I also tried to install the InProComm driver, but the installer crashes just after a while.

  Anyone know what could be the problem? All solutions?

  Thank you

  Naushad

  Hello

  What operating system do you use?
  I checked Toshiba driver download page and looked for the driver for Satellite L10. Here, I can only find a driver Intel WLAN for Vista and the driver InProComm for XP but I can t find a Realtek WLAN driver.
  It seems that your laptop is equipped with an Intel card check so the Toshiba site again:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Before you install the driver WLAN make sure that WIFI is turned on with the hardware switch on the computer laptop and FN + F8.

  Good bye

• Satellite L10-232: black screen after closing the lid.

  Hello

  I moved my laptop (satellite L10-232) in another room, it wasn't stop (just closed it). When I opened it there was nothing on the screen and the battery is not empty (processor still does some things). Anyone know how I can fix this problem?

  Thank you

  Easy...
  PowerManagement is weaker and less stable features on any laptop. (especially with the defective batteries).
  NEVER try to count on the home screen etc. It will work time 999 and 1000 it don't.
  Now, you're done with a laptop computer hanging.
  The ways:
  1. the easy way:
  -push the power button and keep your finger on it for 10 seconds. (5 is enough, 10 to be sure)
  -remove the battery
  -plugin powercable
  -push the powerbutton

  2. the less gentle way:
  -remove the power cable
  -Remove the battery
  -wait 24 hours
  -Insert the power cable
  -push the power button

  3. the hard way: make sure THAT YOUR HARD DISK IS NOT PASSWORD PROTECTED, to OTHER YOU LOOSE YOUR DATA.
  trying to understand hat is the startup key sequence to reset the BIOS at startup. (it should be described in your manual somewhere)

  4. the hardest way:! ONLY BY A PROFESSIONAL!
  IF MAKE SURE THAT YOUR DISK IS NOT PROTECTED BY WORD, OTHERWISE YOU LOSE YOUR DATA.
  The laptop must be open and all batteries must be removed. All the capacitors must be emptied (leaving a laptop without the battery for 72 h). Then turn on
  the laptop.

  Please note that I can't be held responsible for any damage or loss of data under any circumstances.

• Win XP on Satellite M30X does not start after battery was flat

  XP on M30X will not start after battery was flat! Safe mode, last work... nothing works!
  The restore CD offers 3 options1: new installation, 2 toshiba recovery utility (expert mode) und 9 output.

  How do the XP Recovery console, or how to use 2 to restore the system without losing any files.

  Thanks for the tips.
  It is a nite Mare...

  Wolf
  Good day

  The point is that the Toshiba Recovery CD does not have the Windows XP repair console.
  The restore CD contains the image of Toshiba and you can just reinstall the system on the HARD drive and no repair.

  Now you have 2 options of recovery.
  First called standard recovery option would be to format the entire HARD drive and reinstalling the image.
  The second option called recovery expert allows you to reinstall the operating system on a selected partition. Then only this partition will be formatted.

  If you do not want to format the whole HARD drive then you select the second option and select the partition to a new operating system.

• Satellite L300 - will not start after the installation of Skype

  My Toshiba Satellite L300 won't start after installing Skype.
  This happened to someone else, and can I do?

  Thank you.

  I think Skype is probably the most used messenger and ideal application for communication.
  It is professionally designed and programmed. As you know in recent years, it has been offered in many different versions and it is always better and better.

  So I think that Skype itself is probably not the problem. I know that a lot of people also use Skype and I've never heard problem described.

  Anyway, what you can try is to remove Skype and try to install it again. Try also push the BONES at that earlier time. Maybe some Microsoft updates are responsible for the stability of the software.
  It's really not easy to say what the problem is here.

• Satellite M200 does not start after the RAM 4 GB upgrade

  Hello

  I recently updated my RAM just to speed things up a bit as RAM is so cheap these days.
  I have a MEAC M200 T2130 Vista with 1 GB sticks (2 * 512).

  The new sticks are 2 * 2 GB Dane - elec DDR2 pc2-5300, when I put the two and restarted the hard drive light came briefly and then it is just options BIOS of Idol, no POST.

  I tried to use a single stick of 512 MB with two new sticks and they both work in a 2.5 GB configuration just not together that also this only works when the stick of 512 is in internal housing and not vice versa.

  So if someone has had a similar prob or can give me some advice that would be great, I'm not sure if the motherboard can support 4 GB?
  Thank you, Dave.

  Hello

  There are two possibilities why your M200 doesn't not start after upgrading RAM.
  First the RAM installed may be not compatible or could be faulty or the computer laptop doesn't support 4 GB of RAM.

  I put t know what M200 do you have exactly, but you can check the installed chipset and could check on the Intel page if this chipset would support 4 GB of RAM.

  Welcome them

• Satellite L10 screen very dark after disassembly

  Hi all

  I took my Satellite L10 part to swap on the plastic dessu for a damaged joint.
  Now is superb, but something was wrong as the screen is not be enlightened now.

  Anyone have any suggestions what else could be?

  If I look at the screen to light, I can see the desktop, I bought a new UPS thinking that was the problem but it has not fixed it :(

  Maybe a second faulty inverter? I checked all connections etc...

  Thanks in advance!

  Rich

  Hello

  For me, this looks like the inverter issue.
  If you see the desktop and the image appears as behind a thick mist, then in most cases this problem is related to the inverter FL.

  I put t know if the inverter is faulty or if you have connected all the bad parts
  The two may be possible, and so I recommend you to speak with a local laptop technician.
  In your case, that the old parts must be checked first, before buying a new FL inverter, cable, etc.

  See you soon

• Satellite A300-114 - not reinitate after that screen stops

  Hello.

  I have a Toshiba Satellite A300-114 running Windows Vista Home Premium.
  It worked well until two weeks, now, after some time of inactivity, the screen goes off and it turns on again. Spots bright disk hard but the screen remains black. This becomes more often.

  Does anyone have the idea, what the problem?

  Thanks :)

  Hi jjginga,

  Have you tried an external monitor to your laptop computer? It's interesting because if you can identify if this is related to the internal screen or graphics card.

  I had a similar problem on my laptop that the internal screen was black, only the outer one worked. The solution was replacing FL inverter or screen internal.

• Satellite M45 - does not start after restoration on the new HARD drive

  I installed a new PATA 250 GB HDD on my pc. The BIOS is configured to boot from CD/DVD. Toshiba Recovery disk started cold, start follow-up statement to load a new system on the HARD drive. He made a (quick) format on the HARD drive, spent 50 minutes, copy the files from the CD to the new HARD drive. Followed the instructions to remove the CD and reboot the pc. Did. I get the Toshiba homepage for 2-3 seconds, and then I get a white screen with a white block cursor in the upper corner of the LH of the screen. Looks like it does not find the block on the HARD disk?
  The procedure of collection 3 times with the same results. Checked the BIOS to check that it is configured to boot from the HARD disk after installation.

  The recovery CD is blank. Never used because I bought the PC (3.5 years). Put the new HARD drive in a USB enclosure and formatted with Windows, tried again with the same result? Put the old HDD, PC starts and works very well. Put the live CD Knoppix and boot from that, works very well. See the new HARD drive.

  Thus, any suggestions are appreciated. The recovery CD Toshiba is defective? In any case to test?

  Thank you
  -J

  Hello

  Sounds like a problem with the recovery disk or the new HARD disk if your computer starts up fine with the old HARD drive...

  In your case before you start a lengthy discussion, you should try a Microsoft Windows disk to install Windows. If he work it seems that only the recovery disk is defective.

  Otherwise, the HARD disk must be defective. Maybe a bad sector or something else

• Satellite L30 does not start after the upgrade to 2 GB of memory

  I bought 2 GB Crucial memory for my L30. After removing the 512 MB module and adding two modules of 1 GB the L30 wouldn't start. With only 1 GB start ok ok, with the other boot only 1 GB.

  Either 1 GB modules and module of 512 MB with start ok. The two modules of 1 GB boot not together. Crucial gave up and offered a full refund, but I'd rather have a solution if possible.

  At the BIOS level is 2V30, that I understand to be the latest version available.

  Ideas please, John

  Hello

  You're right, this problem seems very strange and I wonder why this happens.
  Satellite L30 certainly supports the 2 GB of memory and you should be able to upgrade with 2 x 1024Mo modules!

  It's strange, but it seems that these two modules are not compatible together
  I found Toshiba recommend module on options and accessories site.
  DDR2 400/533 1 GB (PA3411U-1M1G) maybe you could try this one...

  In any case, I don't think that you will be able to solve this problem in another way. The modules must be replaced.