ScanJet Mac os 10.10

Similar Questions

• ScanJet 200: mac: scanjet Installer invalid digital signature

  Hi y' all,.

  Try to get a new scanjet 200 works with my iMac (Yosemite 10.10)... but the included CD doesn't seem to work. I get the following pop-up message when you try to run the Setup program:

  "HP Scanjet Installer can ' t be installed because its digital signature is not valid." The package has been signed with a certificate that has been revoked. This package may not install what you expect. Get a new copy of the package, and then try again.

  Well... easier said than done. It was true that drivers etc. could be easily downloaded from the HP support page, but no more, it seems. Local HP support seems to be either nonexistent these days, or does not respond. Ideas, anyone?

  Don' t want to return the scanner, but if all else fails...

  Thank you!

  Pete

  Hi Pete,.

  What versions of Mac OS X are listed on CD label? It is intended for 10.10?

  Can see you any difference in installig the drivers following?

  http://FTP.HP.com/pub/softlib/software12/COL47505/DP-115002-3/HP_Scanjet_v1.3.0.dmg

• Scanner not found - Mac OS 10.11 El Capitan with HP Scanjet G4010

  Hello

  I need help, it's driving me crazy. The last time I've used this scanner was a few days ago and now its does not work.

  I'm Mac OS 10.11 El Capitan with HP Scanjet G4010, it's a plugin via the USB port.

  I went on HP website for maybe update the driver, it seems that one does not exist?

  I have unplugged and restarted twice and re-downloaded the 10.10 OS driver, just in case and nothing.

  If I run the application image capture and the scanner appears under devices, research for a minute, then says "no camera or scanner connected."

  Thank you!

  Hello

  Any compatible OS listed in the download section, it is incompatible with El Capitan.

  You can try the drivers of Yosemite and check if they might work on the newer operating system:

  http://FTP.HP.com/pub/softlib/software13/COL53041/DP-154741-2/HP_ScanJet_v2.4.1.dmg

  You can give also the 3rd party VueScan request a test, it seems to support your scanner without the need of additional drivers:

  http://www.Hamrick.com/VueScan/hp_scanjet_g4010.html

  Shlomi

• Can not scan (HP Scanjet G4010) for printer (HP Deskjet 6980) since my Mac OSX 10.9.2 update

  Hi, since the update my Mac OSX 10.9.2, I can not scan to the printer. When I look at 'Printers and Scanners' under ' preferences system, the printer is (HP Deskjet 6980), but not the scanner (HP Scanjet 4010) and I can not add the scanner to the list. " I am able to print items off the computer, but cannot scan and print. When I printed a report on the printer page, it says that it its status is "offline." Any suggestions?         Thank you!

  Hi there Bulldogs3, welcome to the forums!

  I saw that you encounter a problem when you try to add your Scanjet G4010 to your Mac up-to-date 10.9.2. If you have not yet downloaded the installation for the Scanjet, please do it here: HP Scanjet ICA software for Mac OS X 10.6, 10.7, 10.8 or 10.9.

  If that is not always do the trick, follow these 2 steps and add the printer and back scanjet.

  1 mac OS x: how to reset the printing system

  2. repair disk permissions

  I hope that helps you.

  Good luck

• Is there a driver for Mac OS 10.7 and HP Scanjet 4600?

  I upgraded to Lion not knowing he had a problem with PowerPC applications. My HP Scanjet 4600 does not work on the new OS 10.7, and I need to work, as is the best scanner I've ever used. I want to continue to use is that I travel with my laptop MacPro for genealogical research.

  Sorry, the last time this scanner has been supported was 10.4.  You can try the VueScan software, but you are probably better off buying a new scanner or all-in-one for a bit more money.

• HP Scanjet 7400c driver for Mac OS 10.8

  I'm upgrading to OS 10.4 to 10.8 and the latest driver for the Scanjet 7400c is dated 2004, the same software that came with the scanner when buying?  I doubt that it runs with Mountain Lion?  Any ideas?

  Hello

  If you prefer to use the scanner, another idea, sort of try is the 3rd party Vuescan which seems to support the 7400c and application compatible with Mountain Lion:

  http://www.Hamrick.com/VueScan/hp_scanjet_7400c.html

  Shlomi

• Using scanjet G4050 HP scanning 35mm slide

  A week ago, I bought a HP scanjet G4050. I bought to digitize old 35mm slides, I chose this model because it was written, I could scan 16 slides at the same time, but I can't find a software that can do!

  Please help me!

  My operating system is Mac OS X 10.9 Mavericks.

  Sorry for my bad English, I write from the Italy.

  Thank you very much in advance for your answer!

  Sorry for my bad English but I'm Italian and my English is not very good!

  I solved my problem, I "reset" my mac, so I downloaded this driver

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4159 & LC = IT & CC = IT & DLC = IT & sw_lang = & Product = 3236377 #n177

  and I bought vuescan standard edition (because with the free, it did not work) and now I can scan slide 16 in order!

  I save in 1200 dpi and for all slides 16 it takes more or less 50 minutes, sometimes, it seems that the scanner is stuck, but I think the problem is that my mac is not powerful enough to image realignment process takes a lot of time.

• Impossible to install ScanJet G3110 on Yosemite OSX 10.10 drivers

  When I try to open the "HP Scanjet Installer", you receive an error "the PPP authorization has been revoked.

  Any ideas how to operate? Is there a new drive?

  The latest version works:

  HP Scanjet software ICA for Mac OS X 10.6, 10.7, 10.8 or 10.9

  2014-10-31, Version1.3.0, 132,52 M

• ScanJet G3110. "" The system cannot find the path specified "when you try to import.

  tests fine, but don't will not import.

  Hi @lynn22233 ,

  I see that you are having problems, import the scans. I will do my best to help you with this problem.

  Download and run the Print and Scan doctor. It will diagnose the problem and could solve it automatically. Find and fix common printer problems using the tools of diagnosis HP for Windows?

  I uninstall and reinstall the scanner if you are still having problems.

  HP Scanjet G3110 Photo Scanner Drivers.

  Select your operating system, click Next and click on the software to download and install.

  What operating system do you use?

  How to find the Windows Edition and the Version on your computer.

  Mac OS X: how to find which Mac OS X Version is on my computer?

  What were the results when you ran the Print and Scan Doctor? (she print or scan, error messages)

  If you need help, let me know.

  Good day!
  Thank you.

• HP ScanJet 7000: HP Scanjet 7000 deleted partition

  Hello

  Does anyone have the recovery steps to revive a HP ScanJet 7000 after that his score has been removed? I had a tech select this option so that troubleshooting and now it has no real operating system to boot into other than the shell of the operating system. We tried to connect on the web, but really it does nothing.

  Any help would be appreciated.

  Thank you

  JK

  You must transfer the file to port 8816 as a binary file without any information that precedes, then FTP/TFTP and other do not work, basically you need to empty the file directly to the IP address of your scanner. So, you can use netcat (included on unix/mac, windows, you need to download this tool) to push the file, as follows:

  NC 1.2.3.4 PORT<>

  "Replace 1.2.3.4 with the INVESTIGATION period,"PORT"port on your scanner screen (8816 usually) and then put the path to your file after the.<>

• ScanJet 3500c will not work with lion

  Is there a driver to correct?

  The ScanJet 3500 is not supported with Mac OS X Lion.

• ScanJet 4370 not visible anymore

  Hi all

  I have a Scanjet 4370 which I use to scan my old photos/negatives. Since a recent update of the Mac OS, they scan has become completely invisible. I don't see even on my list of equipment in the System Profiler. I almost tried everything, uninstalling the software, for the news of the website of HP, supposed to be compatible, etc... The scanner is just not there. I tried on several Mac computers, all the same result (all have the latest version of the software). On a PC (windows 7), no problem, it is not supported (picassa used to import the photos).

  I'm completely lost

  Can someone please help

  Thank you

  Patrick

  Okay, I think that there are ruminants of the old software (false for 10.6).  We will do this:

  Install the software wrong again (from the CD if you have one).

  Go to Applications/Hewlett Packard / click Uninstall HP
  Click on continue
  Highlight your device in the left pane
  Hold down the Ctrl and Opt Cmd and click on uninstall< scrubber="">
  There will be a pop up that asks if you are sure you want to uninstall all hp software. (At this point, if you continue, all HP printers you have installed will need to be reinstalled)
  Click on continue and let it finish

  Restart your Mac

  Now run a software update.

  Finally, download and install the driver "Full Featured" and the software from here.

• ScanJet G2410: can not find the driver for Scanjet G2410 on OS 10.7

  Hello.

  I just bought a Scanjet G2410.

  When I first ran the installation CD, the instalation of compleete with the following message:

  "The «/System/Library/Extensions/hpPlugInInit.kext system extension" has not been installed properly and cannot be used. "Try to reinstall, or ask your dealer pour an update.

  And when I tried to scan something I get the message:

  "Scanner could not be initialized scanner not found."

  So I tried to uninstall and reinstall the proper drivers.

  But I can't find a driver for my version on Mac OS 10.7.

  There are only drivers for 10.5 and 10.9.

  Can you help me please?

  Thank you

  Paul

  Hi Paul,.

  Follow the steps below and let me know if this is useful:

  First step: remove the existing software of HP Scanjet

  1. go in the Dock, click on the Applications folder, and then click the Hewlett-Packard folder.
  2. click on uninstall HP icon.
  3. click on continue.
  4. Select your scanner model and then click on uninstall.
  5. click OK to complete the uninstall.

  Second stage: repairing disk permissions to avoid the potential conflicts

  1. open the Applications folder.
  2. go to the Utilities folder.
  3. double-click on disk utility.
  4 Select the hard disk that contains the boot volume.
  5. go to the first aid tab and select Repair disk permissions.
  Note: This process may take several minutes depending on the Mac and the amount of the permissions that need to be repaired. The progress log shows when the process was completed.

  Third step: software full features installation HP for OS X 10.6 (Snow leopard)

  Download and install the latest version of the software for OS X 10.6 from following link:

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=3423841&swItemId=sj_78355_5&swEnvOid=219

  Step 4: install HP Scanjet update of OS X 10.7 (Lion)

  Download and install the update to ensure that the update below:

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=3423841&swItemId=cs_97791_1&swEnvOid=219#tab2

  Shlomi

• ScanJet 3000 Pro s2: Scanjet 3000 Pro s2 - support for linux

  Hello

  product page indicates that linux for the Scanjet 3000 Pro s2 drivers are available:

  The HP Scanjet Professional 3000 s2 to add to existing custom solutions through TWAIN, ISIS, WIA, Linux and Mac drivers.

  But the specification list only supported for Windows and Mac OS X. even for the driver download page.

  This unit works with linux? If so, what architectures are supported?

  Thank you

  Indeed, HP is the main contributor to HPLIP, but HPLIP does not all drivers for Scanjet scanners:

  

  I see in the thread that the poster has got some HP drivers by contacting through the discussion list, I suggest to try the same thing and check if you got no response, it's a forum for peer to peer and not direct contact with HP...

  You can sign up and send a mail to the sane-devel list, prescribed for such a seems to me:

  http://lists.alioth.debian.org/mailman/listinfo/sane-devel

  Hope that helps,

  Shlomi

• Impossible to get scanner HP scanjet 8250 to work with Windows 7

  Just bought a new laptop with Windows 7. I downloaded the driver for my scanner HP scanjet 8250 HP site, but it won't work. Any ideas anyone?

  writing in the new message: * e-mail address is removed from the privacy... *

  Just bought a new laptop with Windows 7. I downloaded the driver for my scanner HP scanjet 8250 HP site, but it won't work. Any ideas anyone?

  What version of Windows 7 do you have? It is 32-bit or 64-bit?

  Have you tried HP support? According to http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&taskId=115&prodSeriesId=214599&prodTypeId=15179&objectID=c01909569 here, there is limited support for the 8250 under Win7, which is their way of saying, it may or may not work.

  You can get the driver from here http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=214604&lang=en&cc=us&prodTypeId=15179&prodSeriesId=214599&taskId=135 . Simply choose your version of Win7.

  Many HP products are very picky with their installation procedures. I found that the instructions must be followed strictly in the order as listed, or there may be a problem. If the software has already been installed, it is sometimes best to uninstall it, and then try again. Unfortunately, since most of the documents, it seems the 8200 series was designed more for Mac and Windows.

  I wish you only good luck :-)

  SC Tom