Scanner connectivity lost

Similar Questions

• Windows Mail telling me connection lost and unable to receive emails.

  original title: How can I receive emails?

  I have Vista home basic system. I use Windows Mail to receive emails. Use for at least 5 years. Recently I get the error message saying my connection lost. Cannot receive emails. I can send.

  It could be your ISP server is on the fritz or your antivirus software has got the update and broke things.  Check www.oehelp.com/OETips.aspx#3 and also check your account via webmail if you can to check what is not not a problem on the server side.  Alternatively, you can try to compact and repair the database to try and solve the problem (see www.oehelp.com/WMUtil/).

  Steve

• I work tech support for an ISP broadband. Get a certain calls lately from connectivity lost on cable connections.

  original title: Refresh TCP\IP Winsock

  Hi all

  I work tech support for an ISP broadband.  Get a certain calls lately from connectivity lost on cable connections (coax to modem, ethernet to the computer).  It seems that some of my old Dos standard TCP\IP troubleshooting commands are outdated.  Could someone please review and criticize the following sequence for accuracy?

  1. START | RESEARCH | ORDER -RUN as ADMINISTRATOR
  2. IPCONFIG/FLUSHDNS
  3. NBTSTAT-R
  4. NBTSTAT - RR
  5. NETSH INT REINITIALIS
  6. NETSH INT IP RESET ... Not
  7. NETSH WINSOCK RESET ... Yes

  Thank you!

  J. William (Bill) Hamill Esse quam videri

  WinSock and TCP/IP update.

  Win 7.

  Type Cmd in the search text box.

  Press Ctrl-Shift-Enter keyboard shortcut to run a command as administrator prompt.  Allow the elevation.

  Type netsh winsock reset at the command prompt and press the Enter key.

  Do the same process to refresh the TCP/IP just replace the command typed with.

  netsh interface ipv4 reset Press enter

  netsh interface ipv6 reset Press enter

  ipconfig/flushdns press Enter

  Restart your computer.

  Win XP & Vista

  Type Cmd in the search text box.

  Press Ctrl-Shift-Enter keyboard shortcut to run a command as administrator prompt.  Allow the elevation.

  Type netsh winsock reset at the command prompt and press the Enter key.

  The same processes to refresh the TCP/IP replaces the command typed with.

  netsh int reset Press enter

  ipconfig/flushdns press Enter

  Restart your computer.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Canon MP250 3 in 1, my scanner connected to my pc then at the same time my printer is not

  My scanner connected to my pc so that at the same time my printer is not... u can help me pleasei have a Canon MP250 3 in 1. It is connected by cable.

  My scanner connected to my pc so that at the same time my printer is not... u can help me pleasei have a Canon MP250 3 in 1. It is connected by cable.

  You must install the driver. Visit the Canon website to download and install the latest version of the driver.

• ORA-03135: connection lost contact for a single user only

  Hi gurus,

  I am puzzled to this problem, no one else is having problem connecting to the database except a user who always gets "ORA-03135: connection lost contact" when you try to connect to the test and Prod environment.

  Oracle@PATEST > sqlplus user@testDB

  SQL * more: release 10.2.0.3.0 - Production Wed Dec 23 13:21:08 2015

  Copyright (c) 1982, 2006, Oracle.  All rights reserved.

  Enter the password:

  ERROR:

  ORA-03135: connection lost contact

  Get the same error when you try to connect via EDIVIEW (application) or the prompt of commands or cygwin terminal directly.

  tnsping works fine and return connect credentials

  Here's what I did troubleshooting:

  1. make sure that the user is not locked in the database

  2. place the database restricted and provided this user mode access restricted and tried the connection as long as that user, not luck.

  3A bounced the listener

  4A rebounded from the database

  5. some online forums suggest to increase the timeout setting in sqlnet.ora, in our environment, we use the OID and the sqlnet.ora is the central directory. If this cannot be the issue that everyone can connect.

  6. I checked the sqlnet.log file and there seems to be no incoming connection from this user or machine.

  Information system and database

  Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - 64 bit Production

  Mna3dbts SunOS 5.10 Generic_150400-27 sun4u sparc SUNW, SPARC-Enterprise

  Any advice would be appreciated

  Hello world

  Thanks for everyone came, surprisingly, the problem is solved by simply changing the user password in the database. As soon as the password is reset, I was able to connect using the assigned user name.

• "Network connectivity lost" alert - how to find which NIC is it?

  Hi, we cluster with VCenter 5.5 HA and 2 X ESXi servers.

  Each host has 4 NIC

  One of the host's alert 'Network connectivity lost' that was triggered 02:00 in the morning. Is to verify that NIC is this anyway?

  The events tab says know as NIC.

  Any help would be appreciated, thanks.

  You should see some sort of event in the user interface and the vmkernal.log and vobd.log.

  
  

  VMkernel.log

  ~ #vmkernel.log | grep "link down"

  2014-11 - T 05, 20: 17:20.770Z cpu0:33263) netsched: NetSchedMClkNotify:2329: vmnic1: link down notification

  ~ #vmkernel.log | grep 'link up'

  2014-11 - T 05, 20: 17:33.314Z cpu0:33265) netsched: NetSchedMClkNotify:2321: vmnic1: link notification

  2014-11 - T 05, 20: 17:33.656Z cpu1:33411) netsched: NetSchedMClkWatchdogSysWorld:3786: vmnic1: bind an event received, device operating at 1000 Mbps for the adjustment of the depth of queue to 8646 bytes with bytes 131 expected / us

  2014-11 - T 05, 20: 17:33.735Z cpu1:32808) netsched: NetSchedMClkNotify:2321: vmnic1: link notification

  2014-11 - T 05, 20: 17:33.736Z cpu0:36689) netsched: NetSchedMClkWatchdogSysWorld:3786: vmnic1: bind an event received, device operating at 1000 Mbps for the adjustment of the depth of queue to 8646 bytes with bytes 131 expected / us

  ~ #

  ~ #vmkernel.log | grep "NIC link is Down"

  2014-11 - T 05, 20: 21:25.915Z cpu0:33267)<6>e1000: vmnic5: e1000_watchdog_task: NIC link is

  ~ #vmkernel.log | grep "NIC link is Up"

  2014-11 - T 05, 20: 21:41.660Z cpu1:33268)<6>e1000: vmnic5: e1000_watchdog_task: NIC link is up 1000 Mbps Full Duplex, flow control: no

  vobd.log

  Just did a test for you.

  ~ # tailvobd.log

  2014-11 - T 05, 20: 17:33.418Z: [netCorrelator] 620684191us: [vob.net.dvport.uplink.transition.up] Uplink: vmnic1 is in place. Affected dvPort: 5/a6 eb 07 50 28 7 b c8 5 a - a0 a6 99 e8 ad b 8, 95 6. 1 uplinks to the top

  2014-11 - T 05, 20: 17:33.418Z: [netCorrelator] 620684194us: [vob.net.dvport.uplink.transition.up] Uplink: vmnic1 is in place. Affected dvPort: 5/a6 eb 07 50 28 7 b c8 5 a - a0 a6 99 e8 ad b 8, 95 6. 1 uplinks to the top

  2014-11 - T 05, 20: 17:35.000Z: [netCorrelator] 622285373us: [esx.clear.net.dvport.connectivity.restored] network connectivity restored on DVPorts: ' 5/a6 eb 07 50 28 7 b c8 5 a - a0 a6 99 e8 ad 8 6th b 95', ' 5/a6 eb 07 50 28 7 b c8 5 a - a0 a6 99 e8 ad b 8, 95 6. Vmnic1 physical NIC is in place

  2014-11 - T 05, 20: 17:35.000Z: [netCorrelator] 622285495us: [esx.clear.net.dvport.redundancy.restored] redundancy Uplink restored on DVPorts: ' 5/a6 eb 07 50 28 7 b c8 5 a - a0 a6 99 e8 ad 8 6th b 95', ' 5/a6 eb 07 50 28 7 b c8 5 a - a0 a6 99 e8 ad 8 6th b 95', ' 5/a6 eb 07 50 28 7 b c8 5 a - a0 a6 99 e8 ad b 8, 95 6. Vmnic1 physical NIC is in place

  2014-11 - T 05, 20: 21:26.094Z: [netCorrelator] 853350673us: [vob.net.vmnic.linkstate.down] vmnic linkstate down vmnic5

  2014-11 - T 05, 20: 21:27.001Z: [netCorrelator] 854286718us: [esx.problem.net.vmnic.linkstate.down] vmnic5 of the physical NIC linkstate is down

  2014-11 - T 05, 20: 21:42.149Z: [netCorrelator] 869405317us: [vob.net.vmnic.linkstate.up] vmnic linkstate upward vmnic5

  2014-11 - T 05, 20: 21:43.002Z: [netCorrelator] 870287321us: [esx.clear.net.vmnic.linkstate.up] vmnic5 of the physical NIC linkstate is in place

  2014-11 - T 05, 20: 24:38.723Z: [netCorrelator] 1045972218us: [vob.net.vmnic.linkstate.down] vmnic linkstate down vmnic5

  2014-11 - T 05, 20: 24:39.000Z: [netCorrelator] 1046284854us: [esx.problem.net.vmnic.linkstate.down] vmnic5 of the physical NIC linkstate is down

  2014-11 - T 05, 20: 24:42.230Z: [netCorrelator] 1049478491us: [vob.net.vmnic.linkstate.up] vmnic linkstate upward vmnic5

  2014-11 - T 05, 20: 24:43.001Z: [netCorrelator] 1050286523us: [esx.clear.net.vmnic.linkstate.up] vmnic5 of the physical NIC linkstate is in place

  * Reminder to implement Syslog.global.logHost (software) advanced creation collection newspaper and magazine.

• ORA-03135: connection lost contact

  Hello
  
  I encountered the error: ORA-03135: connection lost contact if I let on during connection > 30 minutes (or so I think)
  
  I'm actually access the data through a dblink.
  
  Please indicate where I could check to see if it is a matter of settings
  
  TKS & rgds

  Hello

  Check the SQLNET. EXPIRE_TIME in sqlnet.ora on client-side, or when you connect from, and it is not set, then set it to recommneded in 9i

  For more information, see this document for 9i http://lbdwww.epfl.ch/f/teaching/courses/oracle9i/network.920/a96581/sqlnet.htm

   SQLNET.EXPIRE_TIME=10 
  

  Concerning

• Scanner Canon lost in the system of preferences

  Scanner Canon 9000f mk 11. have connected via USB. It seems to have disappeared from system preferences, even if it's to show that connected to the reporting system. I can still use it through. Scanning speed and Image garden but I preferred to use it through. the operating system. I prefer the interface. Tried to restart and reconnect the USB without success. It was working fine yesterday. Must have clicked on something I shouldn't. The operating system. seems to have lost track of it.

  Any ideas would be welcome. Thank you.

  Are you saying that it is not in the system preferences-> printers and Scanners?

• HP Deskjet 3050 a Scanner connects to the laptop Toshiba

  Hello

  I have problems with my printer HP Deskjet 3050 a scanner. I have a Toshiba laptop with Windows 7 64 bit. The HP Deskjet works very well with the impression, but the analysis option recently stopped working. The error message that appears repeatedly said: "connection error. The computer connection was lost.

  I had no problem with scanning in the past, but this issue has occurred recently. I checked the option "Manage the computer analysis", and he said that the scanner has been activated. I tried to move the USB cord to different ports, but it did not work. I have the HP Deskjet printer is off and rebooted my laptop, but it didn't work. I tried the troubleshooting options available on this site, but it still does not work. I even tried the HP print and Scan doctor, but have not as well.

  Other options?

  Try to Uninstall and reinstall the printer from a resentment of download of the software and drivers.  Maybe it's that the drivers are corrupt or confused and a unitall and reinstalling should solve this problem.  Let me know what happens.

• Apple Store is not up-to-day - network connection lost

  Hello

  I have a MacBook Pro with OS X El Capitan installed and allows you to connect to the Bank of the United States, where I bought the laptop. I moved to the New Zealand a few months ago and changed the NZ store, and for the last two weeks that I'm not able to update the software through the Apple Store, I always get the message "the network connection has been lost", even if the network is OK:

  

  My account is active, no problem. I even "bought" a free app just in case and it's all good - I could add to my list of software and download it.

  Any thoughts on how to proceed?

  Thank you

  Fabio

  More info: I already followed the instructions to "If you can not connect to the iTunes Store - Apple Support.", everything is OK - no firewall issues, DNS or key ring...

• Internet connection lost of Airport Express

  I have an Airport Extreme bought July 2013 connected to a modem cable my ISP, Cox. I use an iMac running El Capitan. An ethernet cable to connect the modem cable to the Airport Express Terminal. Lately I lost my internet connection. I have set using the diagnostics of the network in the preferences, network, which brings me to restart the cable modem. That works, but it can last all day, or just for a few hours, and then I lose the internet connection. I called Cox Tech support and the guy said that as long as my cable modem lights remained on the balance, then it must be a problem with Airport Extreme. It also suggests to connect the modem cable directly to the computer. I have already happened up to 14 hours at a time and have not lost the internet connection. This leads me to believe that the problem is with the Airport Extreme. I can do about it before buying another Airport Extreme? Thank you.

  What is the brand and model of the modem provided by Cox Internet? Is this the same modem that you use when you first installed AirPort Extreme? ... and, if so, it has had problems before connecting or just started to happen as shown in your post.

• Satellite Pro U400 - network connection lost after suspend

  I have a Toshiba Dynadock. My network is connect directly in dynadock.

  When suspend my Satellite Pro U400 and after reboot to continue working I lost my network connection. Then I shut down my computer and disconnect/connect Dynadock I can continue working.

  What is the problem?
  Dynadock software version is 2.0

  Hello

  I see that you have switched from Vista to XP.

  First of all I recommend you update the BIOS.
  As I m not wrong on the European driver Toshiba page, you should find a newer version of the BIOS.

  You will need to upgrade Win XP to the last State.
  The XP must be up-to-date and all service packs, hotfixes and patches MS must be installed in your laptop.

  Access the Device Manager, and then score in each USB hub root, you must disable the option called allow the computer to turn off this device to save power
  You can find this option in the properties-> tab power management

• Windows Fax and Scan cannot detect Photosmart C4580 all-in-1 scanner connected to the wireless network

  I have no problem printing or scanning when I connect my C4500 to PC via USB.  When connected via my home wireless router I can print OK but can not scan - it's the same for other users and computers.  Windows Fax and Scan gives me the message 'no scanner found. '  I need to work so that all users on my netwrok home can share the scanner.  I use Windows 7 64-bit.

  Thanks Travis_C (HP).  I actually found the solution just before receiving your answer!  I discovered that, although the Solution Center says it would uninstall the existing files before allowing me to reinstall with the latest version downloaded, it didn't remove all the files.  I only discovered this because the new facility has not taken me through the whole fresh installation procedure, he simply asked me what additional features I wanted to install and asked me if I wanted a local printer or network etc.

  I thought that there must be a mistake or problem with whatever existing files were left and the new facility would not correct it.  So I used the control panel to uninstall the existing files, and I made sure that everything was gone.  I then used the last download to reinstall, this time through the new correct installation procedure, and everything now works perfectly.

  With this method I always had a problem on another PC, giving me the same problem I had before.  I realized that this was due to a USB dongle connected to the PC to a wireless keyboard that seems to affect the installation.  When I removed the dongle installation worked again perfectly, and I now have full printing and scanning ability on all PCs.

  I think the installer for this printer wireless (and perhaps others?) should be updated to solve the problem, and also the center of Solution must be fixed to ensure that if you uninstall the software it should not leave anything.

• Internet connection lost when power is removed Probook s 4330

  HP probook 4330 s

  Windows 7 Ultimate + service pack 1 64-bit

  Driver: Microsoft 3.0.0.41 RALINK driver (up to date when I do a search)

  When I remove its internet external power is lost.  The wireless connection always seems to be in place, but there is no traffic.  I can't ping anything in this case.

  The only way to get this up and running again is to

  1. Insert the AC power

  2. restart the service dhcp client (sometimes required to conduct more than once).  The service has not stopped, but for some reason, it becomes it running.

  I also tried to disable the 'allow the computer to turn off this device to save power ".  But that did not help.

  Have spent a long period of problems, have almost tried everything and am at the point where I am considering the purchase of a new laptop computer.

  Kind regards

  Paul

  fixed by updating with the latest wifi driver

• TCP/IP, the connection lost?

  I'm talking with a supply of California Instruments MX15 using the TCP/IP protocol. I downloaded their GUI to control the power supply remote so I could familiarize myself with its operation. The user interface works fine without any connection problem. I'm now trying to make my own driver (the driver download that they provide on their site does not work) to control remote electric power. I have attached the VI that I try to send just the * IDN? command and query an answer back. If I can get this working, I have no problem to find the rest. However I tried to figure this out for the last day or two and nothing helped. I'm new to TCP/IP, but now I understand the bases because of all my google work many hours:

  I have attached my VI to watch. As you can see I tried to use the VISA function as well as the TCP service. The TCP function works fine without error returned, but returns nothing in the buffer and expires. The VISA function however opens communications on the electric network but when I try to send a command to the power it gives me this error:

  Error 1073807194 has occurred at an unidentified place

  Possible reasons:

  VISA: (Hex 0xBFFF00A6) the connection of the given session has been lost.

  Any help is appreciated, thanks in advance.

  You send a character of endpoint with MAX, but not in your VI. Don't forget to click with the right button on the constant and activate '-' code display.

  VISA server isn't essential.