Sleep Mode settings

Similar Questions

• Power Options and reset randomly sleep mode settings.

  It turns out that windows 7 will change ALL its parameters of power in itself! I'll let him sleep a few nights, come home and wake up... only to see my login screen. (I have the normally disabled option in power options). But all my work is always there, so the machine does not restart (or turn off and just resume hybrids) is for sure in s3. Power options check and everything is set crazy, not all back to the default values for either.

  I'm running Windows 7 x 64 Home Premium. This becomes extremely annoying to say the least... Can settle us this?

  ~ MG ~.

  * Edit * I wanted to add that what happens on 4 computers in my friends home even. 2 desktop and 2 laptop computers and all are supported by a Windows Home Server all running windows 7 x 64 home.

  Thank you dewbert I've found that if I go to the command prompt by using 'powercfg' I was able to turn off all the power settings (I like mine to be always running until I want to turn off without exception) I disabled standby, hibernation and set to never turn off monitor and several other parameters. Here is a link to these parameters and so far no more problem.

  https://StackOverflow.com/questions/254066/turn-off-power-saving-options-via-command-line/258777#258777?newreg=dbb749a44ed54e43bdc8c5da48ead67d

  was one of the first things I did with my pc to get rid of norton delivered pre-installed (bitdefender I don't know) and use microshaft security essentials (mse) with no problem more his light and does all these pop-ups as avira and others. also, I went to the ms updates and set it to download, but let me decide when to install and for updates of device, I put that let me decide because I had that feature really get in the way to install things like the new graphics drivers, kept dang thing beat me to the punch!

• HP OfficeJet 3830: 3830 HP wireless printer is offline in "sleep mode" and don't wake up to print

  I've just set up a HP OfficeJet 3830 as a printer connected to my network wireless domestic (Airport Extreme Base Station router 802.11ac wireless). I was able to print-out of my MacBook, but when the printer goes into sleep mode, it appears offline and unresponsive to print. I have to restart the printer for her to appear online and respond. The printer will be in the basement, so it would be very inconvenient down to reboot just to print it. Kind of defeated the purpose of a wireless printer. I tried to disable the sleep mode to see if it works, but sleep mode settings cannot be disabled in the printer preferences. I already spent 3 hours to solve this problem.

  I contacted HP technical support to solve the problem. The person told me restore default settings and then unplug the power to the printer and the router wireless for 30 seconds. After restarting the router, then the printer, we have connected the printer to the network with a static IP address. Who did the trick. Even if the printer is in "sleep" for several hours, it has not disappeared in offline mode, as it is done before. Problem solved for now. Hope this helps others.

• How can I change the settings Windows XP Pro so it stops completely rather than go into sleep mode?

  I run Windows XP Pro and am fed up with my PC, switch to 'sleep' mode when I told him to stop.  How can I change the settings so it stops completely instead of sleep mode? Please do not assume that I know computers - a complete manual would be better. Thank you very much.

  Hello Cosmicbbb,

  Thank you for your message.  If you want to withdraw your option set to the option "Turn off computer", you can make the following registry edit.

  Click Start > click Run > type regedit and press "Enter."

  Navigate to:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\ACPI\Parameters.

  Right-click in the empty space in the right pane and select new | DWORD value.

  Attribute value name

  Then, double-click attributes

  Make sure hexadecimal is selected by breaking 70

  Click OK, close the registry editor and restart.

  Now when you choose to stop the computer in the start menu in XP, you will not be able to choose the day before by accident.

  Change the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk.

  Please let us know if it did or did not help to solve your problem.

  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Vista's sleep mode after 20 minutes while playing PC games even though my power settings are set to NEVER.

  Windows sleeps only during the performance of PC games (not all PC games, sometimes with Call of Duty 2 but not with FIFA 07).

  According to my settings sleep mode & disable the display are set to never for both blocked in battery mode. Any help would be appreciated

  Thank you

  Hello

  1. what happens when you restart the computer from sleep? It back to windows, such as the release of sleep or does go through the normal boot process?

  2 have you done any recent software or the hardware changes on your computer?

  3. don't you face the problem only by playing games?

  Method 1:

  I suggest you to run a full scan of your computer and check.

  Microsoft Security Essentials

  http://Windows.Microsoft.com/en-us/Windows/products/security-essentials

  Note: If infections are detected during the scan, it is possible that infected files would be deleted.

  Method 2:

  I also suggest you to start your computer in a clean boot state, and check if all third-party software could be the cause. Clean boot helps eliminate software conflicts.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7 http://support.microsoft.com/kb/929135

  Note: Don't forget to return the computer to normal after completing the troubleshooting by following the steps described in step 7.

  Method 3:

  I also suggest that you perform a clean boot material to check if the problem is caused by any device.

  Follow these steps to perform a clean boot material:

  a. disconnect all external devices.

  b. start the computer in safe mode.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  c. click 'Start', type 'DEVMGMT.» SMC"in the search text box and press ENTER."

  d. expand "graphics cards".

  e. right click on your graphics card, select "Properties"

  f. click the "driver" tab, click on disable (disable the selected device). Click OK

  g. use the same method to disable other devices such as: map of the sound card, Modem, network, CD - R drive. Note Some devices not available must be disabled.

  h. restart the computer.

  After you turn off the devices, start in normal mode and try to activate the devices one by one and check which device is causing the problem.

• We will seek answers carnt engage power sleep mode despite the ok value settings

  new computer operating system loaded ok, but usually indulge dipite sleep mode all the power setting of say everying is ok. boots emediatley after selection sleep it's not mouse or everything I know help becomes very noisy

  Hello

  • Remember to make changes to the system?
  • Who is the manufacturer of the graphics card and what is the model?
  • What version of Windows are you using?

  You can view these methods:

  Method 1:

  I suggest you to download the latest drivers for the graphics card and install on the system and check. See the article mentioned below.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 2:

  I recommend you perform the clean boot and check.

  Configuration of your system in a clean boot state helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.
   
  See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:
   
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135 
   
  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

• iPhone 6s more going in as a sleep mode when sitting is not.

  iPhone 6s more going in as a sleep mode when sitting not used. I won't get it any delay message notifications until something wakes the phone as a call or unlock the screen. Sometimes, he sends even calls to your voicemail and imessages simply sit not showing not delivered to the other side of people. Seems to happen only when connected to wifi. Anyone facing this problem or have any suggestions? I checked all the settings that I even tried to leave it plugged to load and forever changed the automatic locking.  When that happens all notifications go out at the same time as overload and the sound does not come through them just the notification screen on... Help!

  Is do not disturb on? Icon of Crescent Moon at the top right

  If yes it off using the control center

• After sleep extended / "sleep" mode Tecra M11 don't wake up

  Hello

  On a machine of 8 months, if I si je laissais let machine go into Hibernate / sleep mode with power settings, she wakes up not.

  I can get going again once in removing and replacing the battery.

  I did a restore of this problem did not exist a few days ago... same result

  Do you want? Thank you

  Hello

  Can you please tell us in a first time that don't model cell phone you have and what operating system you use?

• Satellite C50D - A - 13N - Windows question sleep mode 8.1 alarm

  Hello

  I hope someone who knows more about than me power management can help!

  I bought a C50D-A-13N Satellite a few days ago and it was fine.
  However, I had a problem with the mode 'sleep' a couple of times.

  The laptop goes into mode 'sleep' as expected (when the lid is closed or when I press the power button). However, when I press the power button to turn it back on, it comes to life for a few seconds - the screen is on and I can move the mouse and interact with other things - but backwards past mode after a few seconds. All I can do to make it work is to close completely by holding down the power button and restarting, I REALLY hate to do.

  The laptop is fully charged and plugged or unplugged happy.

  Everyone knows about this problem in Windows 8.1 front?

  Thank you

  NTANGOUKANI

  On my laptop, I use the same settings but when I close the laptop lid goes into sleep mode. When I opened the laptop lid starts automatically without using the power button / stop.

  The same thing happens with your laptop?

• Satellite Pro L650 doesn't get often from sleep mode

  Hi, I have a Satellite Pro L650, model No.: PSK1KA-00Y01E running Windows 7 64 bit.
  This laptop does not pick up often after mode "Eve".

  Can anyone offer suggestions on how to fix this?

  What's happening:
  When the computer sleeps, either by pressing the sleep button, or by closing the lid, this seems to work very well.
  After a minute or 2, I try to get the computer goes through the lid opening, or by pressing the power button. Sometimes, it works correctly.

  Most of the time the lights white led at the front displays for a few seconds and then started. Then, press us the power button and, often, the computer starts and says that Windows has been shut down incorrectly and then completely restarts for a new session.

  Sometimes the computer does not start, and it must cut off the power, then press the power button, which then crosses a full restart of the computer for a new session.

  A few weeks ago, we installed the latest version of the bios (2.20), and the problem persists.
  Is it a driver problem or a hardware problem?
  If it is a driver problem, what drivers should I try to install?

  Thank you
  Graham

  Hello

  > After a minute or 2, I try to get the computer goes through the lid opening, or by pressing the power button. Sometimes, it works correctly.
  This means that this problem is not always, but sometimes only and it of not possible to replicate this.
  In this case is not easy to find a good solution for this

  > We have installed the latest version of the bios (2.20) a few weeks ago, and the problem persists.
  > Is it a driver problem or a hardware problem?
  In my opinion, it could be a software problem. I mean that the problem could be related to corrupt the OS Win. Maybe the registry is confused upward. Usually, if the laptop is in hibernation / sleep mode, by pressing power button should the reactivation of the system in this mode and not shut down the laptop.
  So maybe this is s question OS

  If I understand your message, you have just updated the BIOS but didn't try the recovery procedure. Well well, for checking if the problem hardware or software s, you should get the phone to the factory settings.

• Satellite P30 Pro: Will not properly sleep mode

  Hello

  I do not normally use the standby feature, but it hibernates.
  Recently, I started using it, so I keep the supply charge of the power supply of the wireless mouse.
  Unfortunately, he's not exactly going in standby mode it used to - I close the lid and I can hear the fan turns off after a few seconds (about 20) standby red LED flashes and then they come back after 5/10 seconds and stays on.

  The standby light goes green on and in practice, it is, switches the screen off the power and the ADSL connection - that's all.
  I did close the cover of the last night and found this morning with 3 green LEDs on the fans running!

  Any help?
  Please note that the settings are correct - I just checked and it is set to go into sleep mode by closing the lid.

  Thank you
  Mobo

  PS: Lately, I have day a few drivers from the Web from Toshiba site (can't remember which)

  Hello

  If I understand you right, the laptop is on standby and it s is always connected to the local network.

  Well, maybe there is a wake-up on LAN enabled mode who wakes the machine automatically to standby mode.

  Try to access the BIOS and LAN / WLan, settings on the card and if necessary to disable this option.

• Satellite L300 - Sleeping mode closed

  I have Toshiba Satellite L300-170 which came with Vista pre-installed. I have installed XP SP3, installed the drivers, but the laptop doesn't go into sleep mode when it is closed, as it has done on Vista.
  I put it on closed in Toshiba Power Saver to sleep mode, but happening in mode and then to sleep immediately wakes again closed.

  Hello

  Enter the BIOS settings and disable Wake-up on LAN.
  I hope this will be help.

  If this isn't the case, please let me know.

• How can I turn off the sleep mode in Apple Watch the temporary?

  Guys,

  My wife is studied for his chiropractic studies and tried to use Apple Watch as a timer so that it checks the patient's pulse, but she is unable to use the watch due to the sleep mode. Plu wake screen is 70 seconds as described in settings. Is it possible that it can disable temporary screen wake up so she's doing the pulse testing?

  Justin

  Version: Watch OS 2.1

  Hi Justin

  It is not currently possible to disable the sleep of the Configuration screen. The longest time that the screen can stay awake without further interaction is 70 seconds (subject to activating first the setting you describe).

• Satellite A300-1HP is not in sleep mode after 30 minutes inactivity

  Satellite A300 1HP is not in sleep mode after 30 minutes inactivity.
  Windows settings are OK (I'm an experienced user).
  He goes to sleep, if I do it manually (by pressing the power button) - but not after inactivity,

  Any idea?

  Norbert.

  Hello, Norbert

  Maybe you should check the settings of Vista power again. I have too many A300 and everything works fine.
  I tested it with all three power plans. Have you done the same?

  Usually, I use the BALANCED power plan and enter mode standby 20 minutes correctly.

• Satellite A100-049 screen remains empty when reactivated from sleep mode

  Intermittently, have been left for a while my screen A100-049 remains empty when reactivated from sleep mode. It does not meet the access keys and have checked the settings which seem to agree.

  Notice that in this case the power button remains 'blue' and not to return to 'Orange flashing. Is this a common problem?

  Hello

  What do you with the mode 'sleep'? Do you mean the hibernation mode or the mode booth? What operating system do you use?

  Listen buddy. It's really not easy to say why it happens without running diagnostic tests. I think you should try to update the graphics driver and check if you are using the latest version of the BIOS. Two updates might be useful in resolving these issues

  Good luck