Start of Aurora R4 gel after the cooling pump

Similar Questions

• Gel after the start and clicking on browser

  Recently, my computer hangs for a while after the start and clicking on my browser, why and what can be done?

  Hello

  See if this helps you improve performance.

  Search for malicious software with the FREE version of this program.

  This is the right link to download included.

  And does not accept the option "Pay for the version" trial installation

  Download, install, update and scan your system with the free version of Malwarebytes AntiMalware:

  http://www.Malwarebytes.org/products/malwarebytes_free

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  You can clean your hard drive using these two methods.

  "Delete files using Disk Cleanup"

  http://Windows.Microsoft.com/en-us/Windows/delete-files-using-disk-cleanup#delete-files-using-disk-cleanup=Windows-7

  Using the free CCleaner program:

  http://www.Piriform.com/CCleaner

  In NO case use the registry cleaning Option in CCleaner

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  And it is not recommended to use a register or a program of cleaning/TuneUP/utilities they can do more harm to your any good operating system that they claim to be able to do.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  Make sure you have the latest updated drivers:

  Access the site on your computer or equipment manufacturing > Driver and Software Support Section > search your computer or hardware model number > then your operating system > locate the correct drivers > download and install.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  What are the other steps, which does not include some of the above:

  "Optimize Windows for better performance.

  http://Windows.Microsoft.com/en-us/Windows/optimize-Windows-better-performance#optimize-Windows-better-performance=Windows-7

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  It would be a good idea also run the System File Checker tool to check that everything is correct in the system files.

  "How to use the System File Checker tool to fix the files on system missing or corrupted on Windows Vista or Windows 7"

  http://support.Microsoft.com/kb/929833

  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click principally made programs, Accessories, right-click guest, and then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click allow.
  2. Type the following command and press ENTER:
     sfc/scannow

     The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  See you soon.

• TOSHIBA Libretto SD Card - gel after the installation of the SP3/Windows Update

  Hello

  Since the installation of SP3 via Windows Update on a new installation (Original Toshiba Recovery CD) my card reader SD freezes Windows after putting the card in the slot.

  The card is OK and formatted.

  Besides updating windows doesn´t work more.
  I´ll to pass the message on the updates, and the installation stops.

  The patch couldn t be installed because there is a problem with the computer.

  I m of the Austria and I translate to English.
  Hope you can read and understand it - perhaps someone has a solution.

  Best regards

  Ingo

  Published by: ADMIN

  Hello Ingo

  Last days, we read more similar reports on the various problems after installing SP3. As far as I know that Toshiba has faced similar problems after SP2 release and updates were offered. The fact is that SP3 has a negative influence on the different drivers and Toshiba has designed tools and utilities.

  For now, Toshiba has not any update and we need to see what will happen in the future. I always use SP2 and do not have similar problems on my laptop satellite.

  Or you can live with it and wait for update or restore BONES on time earlier and remove SP3.
  I see no solution at the moment.

• Start disk Vista Home required after the new HARD drive has been placed!

  Anyone who knows what to do now? I never received the discs with my laptop (legal purchase). I have windows Vista Home on my laptop?
  Someone at - it had the same problem and it sorted? Any boot disk download work?

  Someone at - it a good tip? Thank you.

  Hello

  "All new Toshiba laptops are delivered WITHOUT records of facilities and you need to create this single disc using preinstalled" Toshiba Recovery Disc Creator. This application shortcut is placed on the desktop.

  When you buy new notebook and start using preinstalled system small recovery disk content followed operation recall must be:

  * + Important INFORMATION + *.

  * + your system is equipped with a hard drive recovery system. If you need to repair your computer in the restaurant to the original factory condition, you can do it directly + *.
  * + HDD (press F8 when you start your computer, choose "Repair your computer" and follow the instructions in the menu) or create a media drive bootable recovery to that end. + *.
  * + Toshiba recommends you create recovery disk medium using the "Toshiba Recovery Disc Creator' to ensure that you are able to restore your computer to the original state that is installed at the factory, even if your computer is seriously damaged. + *

  Then please create restore DVD using DVD - R blank emptiness. I assume that you need 2 of them.

• Thunderbird starts by does not respond after the update to version 38

  I've updated to version 38.0 yesterday and since then whenever I open Thunderbird, he refuses to open and top watch does not respond. I have to close it via the Task Manager. What's past and how to fix it?

  > I tried in safe mode and it opens and I see my mail but when I try again to open it in mode normal it is just the same thing.

  This clearly suggests that something you added to Thunderbird or the operating system is causing at least some of your problems. If the problem occurs with the OS in normal mode and Thunderbird in SafeMode - http://support.mozillamessaging.com/en-US/kb/safe-mode - then you should suspect a program that is loaded by the operating system, such as antivirus. But if it helps me to http://support.mozillamessaging.com/en-US/kb/safe-mode , then the problem is related to an add-on, or accerlation of material found in tools | options | Advanced | General

• Is redemption code starts membeship time now or after the accession period curent?

  I bought the redemtion code forcreative cloud, but it is my subscription until end of may, I now use (and 1.5 year membership) or having to wait until the end of this plan and just then use a code?

  Thanks for help

  Please contact the account/payment via account-payment-order-support medium

• Windows 2003 fails to start after the conversion from a virtual hard disk with vSphere Standalone Converter 4.0.1

  Hello

  I've recently updated my host to vSphere 4. I've also upgraded to vSphere Converter 4.0.1. However, when I convert a Microsoft Windows 2003 virtual hard drive in vSphere, the resulting virtual machine does not start. He gets just after the BIOS screen, then turns black with only a white line in the upper left corner of the console.

  I tried the hot and cold conversions. I tried changing the different settings of default conversion. I tried to remove the source machine and recreate.

  It worked well under ESX3.5, so I wonder what I'm doing wrong on vSphere.

  Any help appreciated.

  Thank you.

  In v4 disk are in SCSI format only.

  Probably also the source was in the SCSI format... so v7 to the IDE format give you not configured in the bootloader of the disks.

  André

• Satellite A10 dies after the power LED blink

  Hello

  I have a problem with the power supply of my Toshiba Satellite A10. Sometimes, after the computer sat for some time, I have a problem with the power. The "plugged power cable" - LED will start to blink and shortly after, the computer just dies.

  It can also have the time to go into a lower energy state before he does. When it happened once, it will most likely happen also when I restart the computer, but after a much shorter time. WXP won't even have time to start. If I stop to select the source of start-up, the problem will occur anyway, this isn't the software. It should also be noticed that when the computer is not turned off, the 'smart power' - is on correctly.

  I know that my battery is not very good. Completely loaded, the computer can run for maybe 3 minutes with only the battery. I know that I must have a battery connected, even if I use the power cable, but this occurs even when the mine problem. The battery would be pretty bad not even allow me to use the computer with a cable?

  It should be added, that sometimes I can use the computer for long periods of time without this problem to happen. I also have a problem with the battery not being not properly in physical contact with the pins of the computer, but this isn't the problem here, because I have the same problem with the battery removed and me holding the battery in place.

  Thank you for your help.

  Andreas

  Hello

  You description is very long and detailed and it of still not easy to say what's wrong.
  Usually, the DC-In witness lights up green when DC is provided FRO the AC current. If the output voltage of the adapter is abnormal or if power outages, this indicator flashes orange.

  So I think that is your AC adapter malfunctions or there is something wrong with the electronic power supply on the motherboard.

• Re: Tecra M10 - after the installation of recovery XP - Boot time 3-4 Minutes

  Hey,.

  Hey well Im installing this laptop for a client and I used the XP CD recovery.
  Now every time you start taking 3-4 minutes after the Windows XP logo. Black screen and the HARD disk is almost not in use.

  I get the following in windows logs event: event 7026 - Source: Service control management
  Failed to start or systemdrivers - atapi and PCIIde
  Device Manager is fine, all green

  Google search but found nothing useful. So what can I do the notebook starts up fast as usual?

  Post edited by: HansiHusten

  Hmm, check if the Tempro software is installed.
  If Yes, then you have two options; would it remove the system or if you want to use Tempro then you need to update this tool.

  The Tempro software is a tool of Toshiba which monitors the HARD disk and the operating system and send you a notice if a new update of driver/tool is available on the European driver Toshiba page.
  I deleted this tool because I don t need.

  I have always followed this suggestion; never change a running system you know :)

• Re: satellite A300 screen turns off after the toshiba logo, will not boot from the CD/DVD

  Hello, I have this problem with Toshiba satellite A300.

  I deleted several files and folders of my drives C and E. To restart the computer, it only shows the Toshiba logo then a slightly gray white screen on a thorough inspection. Whenever I press CRL + ALT + DELETE, the computer restarts and behaves in the same way.

  I tried to use an external monitor, but there is no difference. The tent to start using a CD/DVD, same behaviour occurs, it does not start and screen remains blank after the Toshiba logo, I tried even to change g the order of boot, but in vain.

  What could happen?
  Thanks in advance.

  Hello

  It seems that you deleted system files and Windows no longer starts. Have you tried to restore the disk image factory settings or hard drive recovery? Or do copy the Windows installation... It is easier to reinstall rather fix the problem.

• Z500 GPU works is not in performance of power high/Maximum after the spill of Milo

  Hello world!

  Ask anyone advice/assistance on the issue of my laptop. I have Lenovo z500 with GT650m GPU 4 days years ago my cousin accidentally spilled her glass full of Milo on my laptop, fortunately I was able to remove the battery on time and everything dry up after that 24 hours he was already up and running again but I have a problem with the games I usually do listen on average FPS. Before the spill, I was playing Final Fantasy 14 with FPS on average around 45-60, once I start the game I felt the fan pick up speed, power and starts to heat up. After the spill, it seems that the dedicated GPU is not used I only get around 15-19 FPS on average.

  Settings, control panel NVIDIA to power management is already Maximum power Powerformance, power management is also at its peak. I hope someone can help

  Sorry, but you need to take your laptop to a technician or a lenovo for detailed service center check.

  I don't think that anyone here can recommend an action plan to address your laptop after a spill of liquid. Milo can be sticky and may have formed a layer under the keyboard or if liquid has been spilled into the motherboard, it's a matter of time that the other components start to fail.

• Computer TouchSmart HP Envy 17 t 2 weeks without a break stop at or just after the connection

  Hello

  I really need help because I am pulling all my hair out with frustration. Here are the details:

  I got a new Notebook HP TouchSmart 17 t for my birthday last week. I'm a developer and a code about 15 hours a day, and my laptop 15 inch 3 years was certainly an obstacle. Needless to say, I was very excited by envy, especially 17-inch screen.

  That excitement lasted about 2 days.

  In the first two days of use, I installed all the Windows, Windows updates 8.1, Chrome, Visual Studio, SQL Server 2012 and Management Studio, MySQL Workbench, Adobe Creative Cloud, MS Office, and Avast. The system will periodically re-start during this time, but he wasn't even epidemic.

  But from about the 3rd day, the computer began to stop more frequently. Initially, it was once every 30 minutes or so, but then increased rapidly so it restarted at or just after the login screen 9 of the 10 startups. Every 10th reboot or so, the computer will allow me to connect and I immediately try troubleshoot it before it will re-start again in 5 minutes or less.

  The only thing I could think of that changed on the 3rd day is I installed Kaspersky to replace Avast (the laptop came with a 1 year free Kaspersky subscription). I didn't know if it was the culprit, or if I had a lemon of a computer that was overheating because of hardware problems, but to be sure, I tried to uninstall it. However, the computer wouldn't stay long enough for me to do.  I couldn't even in HP Recovery to restore the system.

  Fortunately, I had burned the recovery DVDs and was able to start the recovery tool by booting from the DVD. I restored the computer configuration with minimal additional software installed (restore failed the on the first trial to 99% complete, but the second test was a success). I was really hoping this would solve the problem so I can start using my new laptop.

  No luck.

  The first time I turned on the computer after the restore, it immediately starts close to, or just after the screen connection again. As before, I am able to use the computer for 5 minutes every 10th reboot or so before it restarts. During those rare moments, I was able to enter the power management settings to turn off sleep and Hibernate, given that several forum posts which indicate as a potential culprit. However, the computer won't stay long enough to install updates of window or Windows 8.1, or to ensure that all drivers are up-to-date.

  Furthermore, I believe that the BIOS flashed when Windows 8.1 has been installed and I wonder if it needs to be reset. (I don't think the restoration process reactivates the BIOS to its original settings, but I have really no idea.)

  Anyway, here I am with a new laptop that I can not use.  I don't know if it's a driver problem, software conflict, hardware problem, problem of BIOS or something else. Needless to say, I am very frustrated and I would really appreciate suggestions.

  Thank you

  Tom

  Tom, welcome to the forum.

  This isn't how HP computers to run.  I strongly suggest that return you it and get another HP computer that works.  If it does not work long enough to install the updates, it will very probably not get much better.  I want to help you to save your hair!

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• Windows 7 freezes after the awakening of the screen saver.

  Windows 7 has recently been gel after the awakening of the screen saver that works all night.  This does not happen after shorter periods, to be in screen saver mode.

  I use a (empty) delivered screensaver.  When he wakes up I can open the Control Panel, but I can't open anything else.  If I try to open a Web browser first browser does not open and I can't open the Panel configuration or any other application.  I can't even restart the computer without hitting the power button.

  This is a new Windows machine and it worked fine for several months.  It is a series of of CM5571 ASUS desktop PCs. Pentium E5400 Dual Core CPU. 6 GB of ram 64 bit Windows 7 Home Premium operating system.

  In the event logs, I see errors repeated for SideBySide and volmgr.

  My advice is that you should update the BIOS and motherboard drivers:

  http://support.ASUS.com/download/download.aspx?SLanguage=en-us

  Have you tried updating the BIOS yet?  'freeze upwards after the awakening of the screen saver'-c' is very similar to a problem faced by Vista users with motherboards Asus 2/3 years ago:

  http://social.technet.Microsoft.com/forums/en-us/itprovistasp/thread/51207cfd-f5b6-4541-851d-783f9e8da0bb/

  Hope this helps, Gerry Cornell

• Satellite A210-199 does not start successfully after the BIOS update

  Hello

  I've got Sat A210-199.
  Yesterday I updated the BIOS, and after that problems occurred:

  While restarting my computer does not start. When I enter the BIOS after a while, it shuts down.
  I guess all this because the temperature of the CPU:

  When I do nothing it is 77 C. I don't think it's normal: (.)
  Computer is very recent, so it's probably not dust inside. And it's so hot from the start, but after the new BIOS, something bad happens.

  Why this temp is so high?
  There is no any process background or something.
  Is this normal?
  And what about this new BIOS?

  To be honest, something like this should not happen. I really don't understand why this is happening. I have updated the BIOS on friends A200 and mine P200 and everything works fine. Here on this forum we can only speculate on this issue, but what you need exactly's professional opinion.

  This probably not help but install recovery image and check with the factory settings. Make sure you also on the lower side cooling fan is not blocked and the laptop can be cooled properly. If the problem persists, you should contact the nearest authorized maintainer and clarify this issue.

  Sorry, but I don't really know what you can do in this situation. I don't see any other way to solve this problem.

  Good luck!

• Windows 7 Pro 64-bit not start after the first update.

  Integrated system:

  Motherboard: Version of the BIOS Gigabyte GA-X58A-UD3R revision 2.0: FA

  CPU: Intel Core i7-930

  Memory: 6 GB Corsair PC3-12800 DDR3 Triple channel

  HD: Western Digital Black 500 GB SATA 3 Gb/s

  Water cooler: Corsair H50

  The operating system has been installed and running perfect. Readers for the mobo has been installed and and all is well. I can see everything on my computer, network, disks, programs, Device Manager and etc.

  First update for the system, only the important updates were downloaded and after the reboot, the system will not start. The system to start repairing the system but found no problem and restart again and return to the screen of system repair.

  The operating system has been installed 5 times and I had the same problem after the first update, the system unbootable. I tried to boot from the Windows dvd, but I had the same problem again.

  Can someone help me with this problem?

  Thank you

  M. Vilela

  Hi Danielle,

  In addition to the suggestion of Rock Star, you can try the following steps and check if it helps.

  Step 1

  You can first try to start the computer in safe mode and check if you can boot to the desktop. Access the link below and follow the steps to boot to the desktop. To boot to the desktop in safe mode keep tapping key F8 during restart. Once you see the option to start in safe mode select and press to enter.

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Step 2

  If you are able to boot to the desktop in safe mode, you can access to view the history of update on your computer and search for the error code and the updates that failed to install and post it back.

  To view the update history, follow the steps below:

  A. open the control panel (all items view) and click the Windows Update icon.

  B. click on the link to view update history.

  To view the details of a single Windows Update. Select and right-click on a Windows Update list, and then click details.

  Step 3

  I would say also allows you to perform a system restore in safe mode to see if you can restore the computer to an earlier date when it was working fine.

  To restore the operating system to an earlier point in time, follow these steps:

  a. Click Start, type system restore in the search box and then in the list click on the system restore program.

  If you are prompted for an administrator password or a confirmation, type your password or click on continue.

  b. in the System Restore dialog box, click on choose a different restore point and then click Next.

  c. in the list of restore points, click a restore point created before you started having the problem, and then click Next.

  d. click Finish.

  The computer restarts and system files and settings are back to the State they were in when the restore point was created.

  Access the link below to learn more about how to repair the operating system and how torestore configuring operatingsystem to a point in time earlier in Windows:

  http://Windows.Microsoft.com/en-us/Windows7/what-is-system-restore

  I hope this helps. Let us know the results.

  Thank you and best regards,

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.