The broken case low HP

Similar Questions

• Compatibility of the broken keyboard Pavilion dv6

  Hello

  I have a keyboard broken on a:

  Laptop HP Pavilion dv6-6110ez (LS222EA)

  I checked the keyboard is faulty by testing virtually everything and then disconnected - manic BIOS, beep stops. In the contrary case, the PC boots, so it bascially functions and also perfectly fine.

  There are also a few messages in the forums with similar symptoms - false characters appearing, "auto-repetition", etc.. Seems to be a classic problem, but makes the PC unusable without an external keyboard.

  The replacement part is 640436-BG1 - Swiss layout (the original HP & Flextronics P/N is 634139-BG1).

  But this part is not available to the user of part of HP or through HP replacement parts shop, or at the local (Switzerland) offical HP parts supplier.

  The exact part is available from 3 Parties at an apparently inflated price, but not locally (--> customs issues!)

  I can get a similar piece (570228-111) from a local supplier at a price reasonable. They claim that the compatibility is a fairly wide range of HW dv6-6xxx and 7xxx dv6, dv6-6110sw dv6-6117eg, which seem to correspond to the models mentioned in the service and maintenance guide relevant dv6 and (http://h10032.www1.hp.com/ctg/Manual/c02842252.pdf).

  The local official HP supplier can also deliver this one but wouldn't listed no compatibility.

  Keyboards are certainly pretty standard and interchangeable enough individual within the same range of models (makes economic sense), if someone can give me some advice on what replacement keyboard would work in practice?

  Work P/N 570228-111?

  Thanks in advance.

  -Patrick

  Thanks for the tip, this is the cheapest around a good margin, but they offer only in the United Kingdom and I live there :-(

  He also says "Call for availability", hmmmmm...

  I think I'll just grit my teeth and pay the "part replacement premium" after all. At least the 'proper' Party will certainly work.

  -Patrick

• Pavillion g7 2000 series: are the substantive case on every 17.3 "g7 2000 laptops series interchangeable?

  Are the substantive case on every 17.3 "g7 2000 laptops series interchangeable? I have a dx 2275 and need low case.

  Hello

  Maybe not all because HP may have 1,000 products from 2000 to 2999. Your machine uses the base of the cover part number: 708037-001

  http://support.HP.com/us-en/document/c03579164

  There are 93 models/products use the same part

  http://PartSurfer.HP.com/search.aspx?SearchText=708037-001

  You can use the basis of models 93/products above for your machine.

  Kind regards.

• Bottom of the dv7 case

  Background dv7 cases are interchangeable between models? I can get a deal dv7-4096 for much less expensive that I can find for the dv7 case - 4263cl. Someone, please let me know how interchangeable are substantive cases.

  Hi BryanMohr42. I understand you want to know if a deal for a dv7-4096 is compatible with the case dv7 - 4263cl.
  I could find the dv7 - 4263cl Maintenance and Service Guide, and's called it the "HP Pavilion dv7 Entertainment PC"
  I can't find a reference to the dv7-4096, but it is possible that this is a "HP Pavilion dv7 Notebook PC".

  I don't think they are 100% compatible, but I am not sure if the lower part of the housing fits, as HP does not offer this as a spare part.

  Maintenance and Service Guides:
  HP Pavilion dv7 Entertainment PC

  HP Pavilion dv7 Notebook PC

  I hope this helps.

• System fan failed error after the Swap case

  Hi, I read a number of similar positions on this issue but has not managed to solve my particular problem and was hoping someone can provide additional guidance

  I recently moved my HP Pavilion Slimline S5280t with a Cooler Master case, everything is OK except that I now get a 'system fan failure, press F2 to continue "message every time I start the PC.

  I know for sure, it is caused by the rear 120mm fan that connects to pin 3 connector on the motherboard chassis fan (I tested it with the old 92mm fan and the error message disappeared).  So based on what I read on the forum, the simplest solution is to disable / adjust the configuration in the BIOS to monitor fan, unfortunately, this option is locked to my motherboard (IPIEL-LA3) model.  If at this point, I have 2 questions regarding what I can do next:

  1. I guess the fan sensor detects for the fan RPM so since this is a 120 mm fan, the speed of ROTATION is less than a 92 mm.  It does not reach some predefined threshold and that's why the error message I received.  So I can solve the problem by exchanging the 120mm fan which runs at a higher SPEED?

  2. I read that there is a hidden menu of BIOS with some of the HP PC, accessible by pressing F11 (or some other keys that do not appear in the original start menu), I have tried F11 and which has become a diagnostic tool, does anyone know if a hidden BIOS menu exists for my particular model? (PC model: S5280t, q8300 CPU, Mobo IPIEL-A3)

  In addition, I don't think that there is an update of the BIOS for my model either... so I'm really out of options here.  Please help if anyone has any suggestions.

  Thank you!

  HW7777, welcome to the forum.

  After consultation on your problem with Erico, another Member of the forum, here's what I was told:

  "The three-pin connector for the fan has + (power), mass (-) and an analog tachometer signal." Given that you have tested the old fan on the system fan header and the error message disappeared, you have checked that the fan is indeed the question. You should try another fan to see if it did not have the rear case fan which is connected to the Sys_Fan?  If produce the same results, then you have reason on the down low, the origin of the problem.   If you want to keep the motherboard in the case of Coolermaster then you should consider making or buying an adapter to mount it in her 92 mm fan. Since the Coolermaster case is much larger, you should be able to mount the fan somewhere. There is a lot more air in the Coolermaster case compared to the business slimline the mobo was originally in. "You are right that there is no update available BIOS.

  If your problem is solved, please click "accept as a Solution.

• Central pivot in the broken connector

  The connector of the power supply of my HP Pavilion dv6 notebook contained a central pivot, but it broke.

  Despite the axis of the absent, power works, apparently without any problem.

  Now I wonder

  What is the risk to use a connector with a missing pin

  What is the purpose of the PIN

  Thanking you in advance

  sellh wrote

  The connector of the power supply of my HP Pavilion dv6 notebook contained a central pivot, but it broke.

  Despite the axis of the absent, power works, apparently without any problem.

  Now I wonder

  What is the risk of using a connector with a PIN missing? Pin code is apparently not completely broken, or the power supply would not work. The risk is that a partial pn will not establish a solid arc contact and eventually destroy the connector that plugs into the PIN on the external power of the laptop connector.

  What is the purpose of the PIN? The axis provides a polarity (+ or-) of the voltage required by the motherboard and battery.

  I suggest to replace the power supply. Take a look into the connector on the laptop. The broken pin part is probably still inside the connector. If this is the case, then it must be deleted so that the new power supply does not work properly.

  Thanking you in advance.

  Best regards

  ERICO

• First HP: help using the command CAS.solve (STRING1, STRING2) within a program

  Hello and hope you can help me with my problem!

  I write a somewhat complicated program (operating mode no case) who has a subroutine called STSOLVE where his entry is always a string from the main program that contains a formula as "'I' = 'V' / 'R', 'R'" and its goal is to replace all the variables contained in "" to the compatible standard CASE generated automatically variable (teiXX where XX is a unique number) and then use the command solve to assess this formula (say final temporary formula "tei1 = tei2 / ') tei3, tei3"). Before returning, he replaces the temporary variables, generated automatically with the original on the result, so the original formula will be sent back solved in the main program.

  My problem:

  It returns the result {UNDEF} or simply {} even in expressions that absolutely work if used with the command solve manually, in the main screen of calculators CASES when the CAS.solve command is used either! Even though I know that the entry of this order is correct according to the tutorials I've read in the forums, I can't work properly.

  I tried all methods of writing the order and I only managed to get a result when I wrote this:

  RPART1: = cas.expr (RPART1);

  RESLT: = case. Solve (RPART1, "tei2");

  .. .or RPART1 contains, say, the part 'tei1 = tei2/tei3' (NOT AS A STRING!) and "tei2" SHOULD be written as shown here, a chain, entered manually just for test (can be 'tei1' or 'tei3' too for this particular case). However, if I put "tei2" in RPART2 of local variable in the subroutine as a string and then pass this variable to the solve command, say:

  RPART1: = cas.expr (RPART1);

  RESLT: = case. Solve (RPART1, RPART2);  RPART2 contains the string "tei2", "tei1" or "tei3.

  Here again, I get a {} as a result!

  I tried so already a lot of things that I don't know exactly what mention here, but I hope I described the main situation enough to start detailed and of course, I'll give you any other information you might need to give me more help. I tried to paste the entire subroutine, or even the entire program, but I don't have any windows pc to connect the first HP and copy the program. I am writing from an Android Tablet and I should maybe type the everything here is not very easy, I will of course if you ask.

  Perhaps, I should also note that the generated vars tei1, tei2 etc. do not exist as variables in the calculator, but if I copy channels same as the program tries to run in the command CAS.solve and manually write in case screen (not a string of course) then they get solved without problems.

  Hope to get help and learn from you and I wish I could found more help about it online, but it seems very difficult and also all the tutorials I found on the cas.solve command in the programs did not work in my case!

  Andreas

  It works, or is this not the problem?

  CAS.solve ("tei1 = tei2/tei3", "tei2");

  I get output: {tei1 * tei3} which is correct.

• If I chose my iphone to backup to the cloud and the wifi when charging. This will be done with the smart case tied as he is still technically in charge?

  The smart case means that my iphone is being backed up to the cloud 24/7?

  I don't think so, I think that the Smart case gives you just the biggest autonomy.

• IMEI on the rear case have 1 number that does not correspond with the *.

  Hello

  I checked my Imei on 5 and I noticed that on the back casing has 1 digit does not match one that shows up on * #06 #.

  *#06#:  **************

  case back: *.

  I check the imei number with: https://checkcoverage.apple.com/ , imei number on the * #06 # is correct.

  Please tell me what might be wrong here.

  Thank you.

  < personal information under the direction of the host >

  I have no idea what * # is #06. However, the back case can be changed (the warranty and do who knows what other damage). If the phone, that shows that the IMEI?

• Dv7-3165dx notebook computer unexpectedly shuts off when the battery is low

  Dv7-3165dx notebook computer unexpectedly shuts off when the battery is low. Even at 17%.

  This gets really annoying, that I keep losing jobs! Before it used to give me a warning and then Hibernate. Now there is no warning and it turns off without saving anything.

  Help!

  The laptop is a year old.

  I already ran the diagonsitic battery and it said the battery was good.

  OK, I think I finally figured it by changing power options, and I think that the way you reset the battery also helped.

  Here are the parameters:

  reserve battery level (this is when the popup will appear).

  10%

  low battery (this is when the low battery action will be performed).

  8%

  critical battery level (my computer would die at this point.)

  7%

  low battery action: sleep, sleep (this customize to your liking).

  battery low notification: on (hold on).

  critical battery action: sleep, sleep (my computer died already in criticism.)

• Why is the sound so low while streaming video on Apple TV

  Why is the sound so low while streaming video on Apple TV? Seems to be much lower sound streaming of netflix, hbo go etc and then watch regular television or playing music.

  Describe your configuration:

  What model ATV and what cables used?

  When streaming video, you use Airplay or apps on ATV?

  You use a receiver, bar the TV speakers or sound?

• D. Norton Antivirus backup drive in error and the space is low

  How to delete files on drive D?  Accidentally saved my Norton Antivirus to the D drive and continue to receive messages that the space is low.  Help, please!

  Hello

  Delete the old backup file Norton will not affect your current installation of Norton AV.

  Kind regards

  DP - K

• IIF ssems to assess allways the two parameters, the true AND the false cases

  Hello

  try the new command of the IIR, I'm a little surprised. Run the following code:

  Dim a, b

  a = 1
  b = 3
  logfilewrite (IIF (a > 0, b/a, a/b))

  a = 0
  b = 3
  logfilewrite (IIF (a > 0, b/a, a/b))

  And you will get a division by 0 error in the second case.  But that's exactly what I want to prevent with this IIF statement.  This example isn't very useful, but there are many cases where this behavior leads only. As in the 'useful' following line of code:

  logfilewrite (IIF (RootPropExist ("MyProp"), RootPropValGet ("MyProp"), "DefaultValue"))

  Someone at - it workaround keeping cela an inline statement?

  Best regards

  Martin Liese

  Hello Martin!

  IIR is like no other VBS function call. All parameters are evaluated until the function is called. In general, it's OK in the case of the IIR, it is sometimes annoying. The solution is to build your own equivalent function of the IIR:

  TrueExpr)
  
    <>Then
  
      IIFX = Eval (TrueExpr)
  
    On the other
  
      IIFX = Eval (FalseExpr)
  
    End If
  
  End Function
  
  

  The downside is you have put it the false and true expression in a string. Hard to read and sometimes a little difficult to write. Your example should bechanged to:

  logfilewrite (IIFX (RootPropExist ("MyProp"), "RootPropValGet (""MyProp" ")", "" "DefaultValue" ""))
  
  

  Matthias

• The W530 microphone low volume

  In April or may of 2015, somewhere in the past two months, the volume of the microphone got low. People on Skype calls say they cannot hear me, and the microphone sounds very low or low. Same thing with Lynks Conference calls. I have to shout to get all the green bars in the audio settings in Skype.

  I've seen this kind of problem reported several years ago on other models in the forums, but what is new from the date of this post.

  I bought a new headset, which has not changed him.

  All Skype and Windows 8.1 microphone volume levels and levels of reinforcement are pegged at the maximum.

  I tried to download the latest driver realtek audio. It did not help.

  If someone has had this experience, it seems like a change of software, update driver or an update of Lenovo. Is there a way to return to a previous driver or the update of Lenovo when it worked?

  The microphone worked if I remember in February and March. I can't put my finger on what has changed, just when.

  It seems that the solution is to uninstall the Realtek Audio driver by using the Control Panel, then reboot and let Windows 8.1 to find its own audio drivers for the external microphone.

  I'm a little upset at the Realtek to put me through this.

• Compatibility card mother Benicia with connector power button on the new case

  IM wanting to upgrade my computer case but he should know if the power button connector will work with the motherboard of benicia.

  Thank you

  Richard

  Depending on the configuration of the connector of power button, HDD connectors and light power connector on the new case, you may need the connectors changes.