The upgrade to skyline view

Similar Questions

• The upgrade of VMware View Agent from 5.2 to 5.3 causes agent become inaccessible in Horizon administrator.

  Short throughout, I was unable to update several agents to 5.3, because the 5.2 msi could not be found.

  I followed the instructions on this page (KB VMware: UpgradingVMware View Agent and View Composer fails with the error: the component that you are trying to use is o...) and installed the agent 5.3

  It worked on the test systems 3. When I went to live 2 principles broke. I can RDP but you cannot use the Client to connect and get a response that says that the resource is not available.

  I looked into the Horizon view Admin and they are listed as inaccessible agent, matching State pairings.

  I did the following.

  Uninstalled agent 5.3.

  Uninstalled the tools.

  Reinstalled them both.

  The removed from the inventory of the pool and added them.

  This is Win7 systems.

  Any help would be much appreciated.

  Fred

  I could solve this problem by removing the pool, then adding back and then restarting the agent service. It sometimes took two reboots, but that's fine.

• Recently upgraded to El Capitan, I had that problem for Mail stop unexpectedly when I saw some posts.  I followed the steps and was able to remove the trouble messages.   Now I can't restore the mail window message viewer component.

  Recently upgraded to El Capitan, I had that problem for Mail stop unexpectedly when I saw some posts.  I followed the steps and was able to remove the trouble messages.   Now I can't restore the mail window message viewer component.  When I try to catch the separator bar to go back to the left, only half of the small arrow icon and line appears, and it cannot be moved.   Can open the message by double clicking a message viewer.

  Hi there, alicefrompa!

  Thank you for using communities Support from Apple. From your post, I understand that you do not see the Message Viewer box which allows you to read your e-mails; only see you the Inbox that includes a brief overview of the message and are unable to restore access using the separator bars. I have had this happen to my own Mail app and am happy to let you know how I could fix!

  You are really on the right track - you want to roll your mouse over the divider between the Inbox and sections Message Viewer (which should now be on the extreme right edge of your mail window) and drag it to the left.  When you click on the receipt/Message Viewer box, the cursor turns into a line continuous black with a single arrow pointing to the left. When you see the cursor change, click with the left button of the mouse and (while holding down the mouse button in) drag the combination line / arrow to the left. You may need to drag a little further than before to get it. I had to hang mine almost completely in the middle of my Mail app before the display of the message box appeared.

  From there, you should be able to adjust the boxes to your widths you want as expected.

  If you are still not able to get the display of the messages visible after have try this, here are a few more things that you can do.

  1. Press command + O on your keyboard.
  2. Exit the Mail application, and then press on and hold the SHIFT key on your keyboard while reopening.
  3. Restart your Mac by selecting the menu  Apple in the upper right of your screen restart from the menu drop down.

  See you soon!

• I use the SAGE software but can't view or print all reports since the upgrade to Windows 7

  I use the SAGE software but can't view or print all reports since the upgrade my laptop to windows 7.

  Is there something in windows 7 that is in conflict with SAGE software and if so is there a download available that will fix it

  It is common for accounting packages to must be run as an administrator (essentially because the companies are too lazy to properly program).

  Try first - then approach wise for assistance.

• Internal error of the View Composer. Contact your administrator. After the upgrade using VMware-viewconnectionserver-x86_64 - 6.0.0 - 1884746, I can't edit the AutomatedDedicatedComposerPool

  Hello.

  Some panic here.

  After the upgrade using VMware-viewconnectionserver-x86_64 - 6.0.0 - 1884746, I can't edit the AutomatedDedicatedComposerPool

  I get internal error View Composer. Contact your administrator.

  Help, please.

  Best regards

  Peter

  Hmm

  Apparently available allow was to be done by right-clicking in the pool and enable provisioning on the Provisioning... tab. Not on the status button in the overview of Ddesktop pools.

  Dang.

  Best regards

  Peter

• Welcome to the upgrade to ESXi 4.0 to 4.1 and 4.6 of view

  
  Hello everyone, I have a question regarding the upgrade of my esxi hosts that are running a cluster View 4.6.

  Overview of my environment:

  The current 4 ESXi hosts run 4.0.0 261974.  These hosts are UCS B200 M2 blade.

  I need to add a 5th host for abilities and bought a new UCS B200 M3 blade.  The M3 blade only supports ESXi 4.1 U2 or more so I can't install the same version running on my 4 current hosts.

  My question is, what would be the best practice to get the blade M3 installed and in my environment?

  Should I install the 4.1 u2 on the M3 blade and attach it to the cluster with the 4 hosts running 4.0, and then you spend the remaining 4.0 hosts one at a time?

  or

  Can I upgrade the 4 hosts first run 4.0 to 4.1 u2 or u3 and then install and join the M3 host?

  In addition, please include any documentation useful update, or links to, that would be great!

  Thank you!

  You consider right. Do an upgrade at a time. 4.0 and 4.1 also can coexist without problem, but the ideal is to upgrade.

  http://www.VMware.com/PDF/vSphere4/R41/vsp_41_upgrade_guide.PDF

  Good luck with that.

• Since the upgrade to 11.0.11, document relative cross links when viewing the PDF in the browser don't work is no longer

  I maintain a web application that contains hundreds of PDF files that contain relative links, among other documents.  The application relies on getting the Base URL of the Adobe Acrobat web plug-in to navigate between different PDF documents while viewing in the browser (the links do not work in a standalone Acrobat window).  Since the upgrade to Adobe Acrobat Reader 11.0.11 last week, these links no longer function (I checked they still work in 11.0.10).  I also have the same problem in Acrobat 10.1.14 (worked in 10.1.13).  I have tried all the other versions.  It seems that updates broke the functionality of our application invoked for the past ten years.  Any help would be greatly appreciated.

  It is a change that seems to work for Adobe Reader 11.0.11 but I can't find any documentation / web post of what he does.

  One would have details of these entries to registry FeatureState?

  HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Adobe\Acrobat Reader\11.0\FeatureState

  3836776 = DWORD: 00000000

  I also have Internet< display="" in="" read="" mode="" by="" default="" disabled="">

  HKCU\Software\Adobe\Acrobat Reader\11.0\AVGeneral

  bBrowserDisplayInReadMode = DWORD: 00000000

  For 10.1.14 I found that follows would work, but same as above no documentation or approval from Adobe.

  HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Adobe\Acrobat Reader\10.0\FeatureState

  3836774 = DWORD: 00000000

• Photos for Mac behaves VERY strangely since the upgrade to Sierra

  Hi all.

  I have improved my mid 2010 MacBook Pro for macOS Sierra September 21.

  The first time I launched the Photos app after the upgrade, I got the usual message on photo library updated, but when that reaches 100%, I noticed that he was missing a large number of thumbnails in my library. The photos in question were display in miniature (or 'moments') view as pale gray rectangles with a cloud icon in their breast.

  I don't immediately panic, because I assumed that they would gradually repopulate for a little while. I got "Storage optimize Mac", the value of preferences so all of my original pictures must be in iCloud. I have a Time Capsule, make automatic backups, and I made a backup Time Machine on which, immediately before the upgrade, so I am reasonably confident that I did not really lose my photos, (and all of my pictures and their thumbnails are present & correct on my iPhone).

  But, almost a fortnight after the upgrade, most of my thumb nails is always reported missing since the Photos of Mac application, which makes it very difficult to find pictures of course.

  Last night I noticed that the Photos app showed 'Uploading photos 10 985 nnnnnn' at the foot of the view of the times, with the first digit decreases slowly, so I disabled the options to ensure that my Mac doesn't go to sleep and I let it run until the download was complete energy saving. Then, he showed "updated... "at the foot of the view of the times for a while.

  I was hoping that my thumb nail would be back after that, but they are not!

  It seems that the Photos app is not sync with my iCloud storage, for any reason, or at least if it does not in fact what it has synchronized.

  A double click on these thumbnails blank to open the photo is not consistent either. On some that I try to open, they do not open, and when I return to the thumbnail display the thumbnail is now also. But on others I try to open I just see a completely white area where the photo should be. However (and this is really weird!) when I return to the thumbnail display after those I see very very briefly the photos as they will shrink to the size of the thumbnail, and then they are virgins thumbnails with clouds still...

  I wonder if I should change the preference of Photos of 'optimization of storage' to 'download the originals' in an effort to recover my thumb nails. It seems that I have almost 62 GB of free space on my Mac, and my Gallery of photos shows that there are currently 31GB. Or do I have to re - install the Photos app? (Is it possible?)

  Or is there a better solution to the problem please?

  Thank you for all the helpful tips.

  Post edited by: Steve Zodiac: grammar Correction.

  try to turn a thumbi = nail and reotating back - if it suits it you can do so for groups of up to about 1000 photos at once to correct quickly - how rebuild thumbnails in a photo library

  LN

• How can I buy an iPhone AT &amp; T using the upgrade program and replace it with T-mobile?

  I intend to buy the iPhone, which will be released this morning, and I heard that the next iPhone will run out quickly, the configuration I wanted, as 6s and 6 s iPhone more runs so quickly, but this time, I want to start from the beginning because I don't want to miss a day of work, or otherwise I won't get it that $5000 per day , so if I don't have a number to AT & T, what do I do because I am on T-mobile, and I can't go to the Apple Store Friday on time to conduct a review of YouTube and get views and re-read soon on my site. I am currently on AT & T, but I heard that the iPhone is going to be better with the upgrade program, and I wanted to sign up. So, why do you need an AT & T number, and why should I go to the Apple Store if I want a T-mobile and last year, I had to wait until October 9 to get my 2nd iPhone 6 s more of Apple and a back of pre-orders unlocked without AppleCare.

  Nothing is still announced by Apple, but wait like everyone else.

• Why my iMac turns so slowly after the upgrade of the Lion in El Capitan?

  Why my iMac turns so slowly after the upgrade of the Lion in El Capitan?

  Just what do slow down? Rotation beach balls?

  Run and view the results here so that we know more about your configuration.

  http://etrecheck.com/

  EtreCheck

  https://discussions.Apple.com/docs/doc-6172

• How can I restore my pinned tabs that have disappeared since the upgrade to 39.0?

  I have my tabs pinned, put in place in 3 lines (default) and 4 columns (user set). Since my upgrade to 39.0, my bottom line is not visible, but my aboot parameters: config are 3 x 4.

  You can zoom the subject: newtab page to resize tiles and tiles most enter on the page.

  • View > Zoom > Zoom out; CTRL and -
    'Zoom text only' should not have a tick

  This will affect all elements of the page, text so get more smaller institutions.
  Make sure that a tab with the subject: newtab page is open when you change the zoom of the page.

  Toggle the pref browser.newtab.preload false on the topic: config page in case of problems with remembering the zoom on the page of the on: newtab page.

  You can open the topic: config page via the address bar.
  You can accept the warning and click on "I'll be careful" to continue.

  • http://KB.mozillazine.org/about:config

• After the upgrade to 38.01, cannot display some web pages.

  I am running Windows Vista. It started just occurring after the upgrade. Not all pages are scrolling. Help! I'm technically rudimentary.

  Thank you

  You get a pop-up dialog box or style style without a menu or the toolbar either? In this case:

  38 of Firefox has a little problem with this combination of circumstances:

  (1) viewing a page in a private window
  (2) tabbed browsing is powered down
  (3) you click on a link encoded with target = "_blank", which launches the link in a new window

  The new window opens without menus, toolbar, scroll bars, etc.

  Work on this bug is in progress, but I don't know if the fix will be available in the coming weeks. These are the known workarounds so you can continue using windows browsing private - one of them will work around the bug:

  (1) use tabbed browsing (there is a checkbox in Options > general > "Open new windows in a new tab instead");

  (2) shift + click the links to open in a new window with standard features. or

  (3) change a bunch of hidden settings as explained below - it will not you make changes to the way you use Firefox, but sometimes you need to enlarge some small pop-up windows that have been sized for a window with no toolbar displayed.

  # 3, here are the steps:

  (A) in a new tab, type or paste Subject: config in the address bar and press ENTER. Click on the button promising to be careful.

  (B) in the search above the list box, type or paste feat and make a pause so that the list is filtered

  (C) for each preference that begins with dom.disable_window_open_feature. , if it is not 'true', double-click it to true.

  You may find that you prefer this anyway, given that sites can band is more these pop-up windows features.

  Who is relevant or do you have a different question?

• After the upgrade to 10.11.6, mDNSResponder runs havoc

  Hello

  After the el Capitan to 10.11.6, upgrade my internet connection has been blocked by my ISP because of a flood of packets to multicast from my side.

  I studied using the monitor activity and found that mDNSResponder creates the network traffic with more than 20 MB per minute, and I see also all the lights on my network switches will blink quickly. The problem disappears if I manually kill the process; then it automatically restarts and creates only a few KB per min.

  It is two machines, an iMac and a Powerbook from 2015. Nothing else was changed other than the upgrade.

  So obviously something is wrong.

  Thanks for the resolution!

  W.

  Please read this message before doing anything.

  This procedure is a diagnostic test. It is unlikely to solve your problem. Don't be disappointed when you find that nothing has changed after you complete it.

  The test is intended to determine if the problem is caused by a third-party software that loads automatically at startup or logon, by a device, by a police conflict or corruption of system files or some system caches.

  Disconnect all devices wired except those required to test and remove all the expansion cards from secondary market, as appropriate. Start in safe mode and log on to the account of the problem.

  Note: If FileVault is enabled in OS X 10.9 or an earlier version, or if a firmware password is defined, or if the boot volume is a software RAID, you can not do this. Ask for additional instructions.

  Safe mode is much slower to boot and run as normal, with limited graphics performance, and some things work at all, including an audio output and a Wi - Fi connection on some models. The next normal boot can also be a bit slow.

  The login screen is displayed even if you usually connect automatically. You need your password to log on. If you have forgotten the password, you will have to reset it before you begin.

  Test in safe mode. Same problem?

  After testing, restart as usual (not in safe mode) and make sure you always have the problem. View the results of the test.

• Cannot turn off after the upgrade to 10.11.4

  I have a late 2012 3.4 ghz i7 iMac / 32 RAM 10.11.4 running (and other iMacs around the office): I can't stop. When I try a stop down (after removal of servers/TimeMachine, close all applications - even unplugging the ethernet cable) - it goes to a black screen with the "circle of rotation of lines." They will be 'spin' this weekend if I let him. Instead, I'll put the machine to sleep during the week and make a hard cock down via the power button Friday night.

  I think it has something to do with the upgrade to 10.11.4. I have reset the PRAM and tried also to start up in the 'hidden' startup disk and first aid running without result. Tried to find preferences for throw - unsuccessfully - Finder found "com.apple.finder.sfl" I should throw?

  Another change is that now I'm using a new Pegasus2 18 to RAID hooked up via "2016" MacMini and Apple server software (replaced my Apple XServe)

  Someone at - there a method I can use to stop? Thanks for your help!

  Please read this message before doing anything.

  This procedure is a diagnostic test. It is unlikely to solve your problem. Don't be disappointed when you find that nothing has changed after you complete it.

  The test is intended to determine if the problem is caused by a third-party software that loads automatically at startup or logon, by a device, by a police conflict or corruption of system files or some system caches.

  Disconnect all devices wired except those required to test and remove all the expansion cards from secondary market, as appropriate. Start in safe mode and log on to the account of the problem.

  Note: If FileVault is enabled in OS X 10.9 or an earlier version, or if a firmware password is defined, or if the boot volume is a software RAID, you can not do this. Ask for additional instructions.

  Safe mode is much slower to boot and run as normal, with limited graphics performance, and some things work at all, including an audio output and a Wi - Fi connection on some models. The next normal boot can also be a bit slow.

  The login screen is displayed even if you usually connect automatically. You need your password to log on. If you have forgotten the password, you will have to reset it before you begin.

  Test in safe mode. Same problem?

  After testing, restart as usual (not in safe mode) and make sure you always have the problem. View the results of the test.

• After the upgrade to the new version of Firefox, one losing all my tabs, whenever I close. I did what was suggested in the FAQx, but I still lose all when I close. I want to solve this problem. How?

  I want to know how to make my tabs save when I close Firefox. I did what was suggested in the FAQ section, but all my tabs disappear whenever I close Firefox, you use the command "exit", or the "X" button That was the reason I never updated to the new version previously, but hoped that the problem had been addressed and updated, now I'm stuck with having to reopen each tab whenever I open Firefox. Please tell me there is a way to fix this. And I'm not fluent technospeak, so I need simple and basic instructions. Thank you. Mark

  Hello

  By pressing Alt + T on the keyboard displays the Tools menu.
  To see the full menu bar temporarily, press Alt or F10.
  To make the permanently visible menu bar, right-click on the + after the last tab and enable (check) menu bar or press Alt + V > toolbars > menu bar.

  Everything on tools > Options

  Keyboard shortcuts

  ...............................................................................................................................

  Useful links:

  Beyond the tools > Options - about: config

  Subject: config entries

  Information page (Alt + T) tools > Page Info, right-click > view Page information

  View without Plugins

  Files & Firefox profile folder

  Firefox commands

  Basic troubleshooting

  After the upgrade

  Safe mode

  Extensions of the issues

  Troubleshooting Extensions and themes

  Troubleshooting Plugins

  Test Plugins