Time to change in the printer?

Similar Questions

• Form diagnosis of prints every time I turn on the printer.

  I recently put in a new cartridge black ink (HP product) and every time I turn on my printer prints a diagnostic sheet - this is the first time that this has happened and I used the printer for about 4 years. Thanks for any help.

  OK, the Photosmart C3180 see the troubleshooting here page.

• Please help me to change on the printer with my choice!

  I can't print because I don't know how to change the default printer to a printer on my list.  Is it possible that I can only put in place?  I can't change my default printer through Windows because it doesn't allow me to do.  If anyone can help to guide me through this, I would really appreciate it.

  Hi Tchaney13,

  Could if it you please let me know what OS are you using?

  Please go to 'Control Panel' > 'Printers' and right click on the printer and select "set as default".

  You can check: http://windows.microsoft.com/is-is/windows7/change-your-default-printer

  It is a question that you should ask instead of Adobe Microsoft :-)

• The system time has changed after the restart of Bootcamp

  Hello

  After a restart of the boot camp partition Windows 10. I have the wrong time, in fact its always an hour later that it is.

  Although in the Control Panel, I checked the "time of to of Appleserver" it does not update the time of its actual value. Parenthesis in Win 10 (BootCamp) time is correct, then the difference that happens just restart in Mac OS.

  System:

  MacBook Pro early 2011

  OS X El Capitan 10.11.3

  Bootcamp

  Win 10 latest version with all updates/Updates aviable

  What could be the problem?

  Thanks for your help!

  Set the time zone correctly on OSX and Windows.

• HP Compaq 6715 b: perm of the changes to the print to HP Envy 5520 project

  Is there a way to set the project as my default for my HP Envy 5520?

  For Windows 7, click Start, devices and printers, right-click on the 5520 envy, printing preferences, select the options that you want, apply, OK.

• Submenus have a black outline, no matter how many times I change in the States Panel

  

  Hello

  could you please remove Stroke on the 'Menu', check this screenshot

  

  This should fix the problem. Let me know if you have any question.

• HP Office Jet Pro 8620: IMAC loses the connection to the printer

  Computer do not print and seems to lose the connection to the printer. I deleted all printers and made a new connection to the printer. Printer address 192.168.0.14.  IMAC later loses the connection to the printer again. I look at address on printer and now is 192.168.0.15. Its done this several times. So why the printer continue to change its address? Is it possible to put it permanently?

  Think I fixed it now. Problem was that I also had to set the Configuration of DNS address. Of course although computer knew the address of the printer, he could not find the server (i.e. the router) don't understand everything, but seems to work now.

  Went to the printer the webserver integrated with my Web browser. On the network, wireless 802.11, IPv4 configuration tab, I already had the manual IP, the subnet mask and the default gateway. I need to go to the next Section under the DNS Configuration, select "Manual DNS Server", then fill in the news for "Manual preferred DNS server".

  AllOf the above address were extracted from the information sheet, you can print directly from the front panel of the printer. My son who is more Apple savy than I am, said that he did not understand why I had to put an IP address manual for printer even when that she would have remained the same.  I don't either, but just know whenever IMAC my wife lost the connection to the printer IP address had changed.  My router is built with the Modem cable provided by the company. It is perhaps part of the problem.

  So no, it seems to be fixed number. So if you set a manual IP address, make sure that you also specify a "preferred DNS server"

  Thanks for your help

• OfficeJet Pro8500 A909a cleans the print heads whenever his touring on!

  Hey elders ~

  Why my Officejet Pro8500 A909a short "Clean printhead" feature every time I turn on my printer?  Is there a place I can tell you to STOP?  It's my expensive WASTE.  Help!

  Hi @eschro

  You turn off the printer when you are not using it and turn it back on, or are you referring to light once it falls in mode 'sleep'? The following presentation may help explain why the print head cleaning is performed each time you turn on the printer.

  The print head nozzles get clogged over time, most commonly by dried ink or microscopic dust particles. Nozzles are kept clean of servicing, including wipe them the surface with a rag rubber, ejecting ink through the nozzles to purge the particles and to prevent drying and pumping with ink to clean the print head. To keep the printer ready to print in color or black, these routines of service generally consume little ink in each cartridge, even if only black or color is used in the document being printed.

  Tiny air bubbles form in ink over time and can block the flow of ink in the printhead long duration printers (IIC). In some printers IIC, bubbles of air can be caused by a change in the ink cartridge. Air bubbles can be removed by pumping them out of the print head. When you remove these air bubbles, little ink is also removed. On the IIC systems, multiple colors may use the same print head. When a single color cartridge is changed, some ink is also consumed since the other color ink cartridges using the same print head. - Source
  

  There is no way to disable this feature, but in General, it is best to leave the printer on and allow to maintain on a regular basis, rather than turning off and back on.

  I hope that answers your question. Happy Friday, have a great weekend.

• Photosmart C7280: the printer does not print

  I have a Photosmart printer and an HP Pavilion all on a PC running windows 8.1. Recently changed service broadband provider and have had printing problems since then. I have set up the Wifi and can produce a test print, I can also print HP troubleshooting, but impossible to print whatever it be held on PC, such as documents and pictures.  I get a message saying "send to printer", but nothing happens.

  I have tried setting up via a usb cable, still unable to print...  I uninstalled reinstalled the printer restarted by taking the plug from socket & crossed the HP step by step, guide, but no change.  The printer has accepted the new Wifi system & shows the logo of the Wifi on the small screen.  I even tried to print things via Adobe Photoshop, but still nothing.

  Any help would be welcome.

  Thank you

  Hello 643gs,

  Welcome to the HP Forums.

  I see you are having some problems printing via a wireless connection.

  I have a few steps we can try.

  Let's start from square one.  First of all, please make sure that you have the printer power cable connected directly to a wall outlet and not a bar/power strip. Here is a document that uses a LaserJet printer for example, but it is intended for HP products in general. Please click the link which explains the problems when connected to an uninterruptible power supply/Strip/surge protector power.

  Here is a link to the uninstaller (Windows 8).  We want to have all the software and drivers removed so that we can start fresh off.  Once the uninstall is complete, reboot the computer.

  When the computer is back on, click on the following link for the drivers and software HP Photosmart full feature.  Save this file on the desktop so that it creates a new icon.  Double-click the new icon and follow the installation instructions.  When you get to the connection options, move it to the printer and follow the next set of instructions.

  On the front panel of the printer, go to the Setup menu.  Once in the configuration of the menu display on the network menu and down to the restore default network settings option.  Once the network has been restored, make the wireless configuration wizard.

  When the wireless configuration wizard is complete, you should then be connected to the network and be able to see an IP address. Hover over to the computer and make the Wi - Fi connection and type the IP address that you received just from the printer.

  You should now be connected and be able to print from the computer.

  I would like to know if you have any questions or concerns.

  See you soon,.

• Designjet T520: Designjet T520: failure of the printer

  Had Designjet T520 about 18 months. Use it only for printing large format on roll paper. Error message: the printer failed. "There is a problem with the printer or ink system. Turn the printer off, then on. If the problem persists, contact HP. »

  Have made the procedure "on - off" several times including disconnect, allowing the printer to sit idle and then plug it in, turn on and still the same problem. I also removed and checked each ink cartridge and cannot detect all problems.

  Remove all the ink cartridges and turn on the plotter.  When he asks the ink, put them in one at a time and see if the error is displayed when only one of the ink cartridges installed.

• How can I check the interface of the printer with my Mac?

  I use a Macbook Pro with OS X 10.9.5.  I have a Kodak hung printer which worked beautifully until 3 days ago.  Now it is printing very light, barely able to read.  I did everything what others have suggested: changed ink, the printer cartridge out and cleaned, printhead maintenance - nothing works.  I know that a week ago, I received a message that there is an update of the software for my printer.  I wonder if that could have anything to do with it.  I don't know how to check this.  I love my Mac and my printer.  Help!

  I just wanted to check that I have download the software update.

• OfficeJet Pro 6830: After winning 10 ipgrade lost the Scan from the printer function

  Update Win 7 Pro.

  Digitization of works normally in the HP Support Assistant (fully updated) and inside my desktop (the .bin file) application where I have access to all the functions of the printer.

  Scanning initiated by the product of the printer normally but in the end, it fails with an error message.

  The error message reads:

  "The HP scanning Application could not save the file to the specified location.

  It is same location Assistant support and the decstop succesfully registers, namely

  C: Users/username/documents.

  Is this a form of rights issue administrator/access, I wonder because he is obviously not a driver issue or a printer.

  Thank you very much in advance for any wisdom.

  You know @Scarguts, I have to be honest, I don't know if it is a question of rights, or if there is something wrong with the destination of your choice. I choose a new destination and try to scan the image. You can make this change in the printer Assistant software.

  This will help isolate the problem.

• HP8620: Error in the printer

  I went to my HP8620 yesterday to find a printer error duisplayed on the screen.  He said "Please stop printer, then press.  All the lights were flashing.  I turned the printer, then on and the printer has been its start-up phase.  Almost immediately, the screen went black, then blue, and finally the printer error appeared again on a white background.

  I repeated this procedure several times them turn off the printer and unplug.  I disconnected and then reconnected the USB connection to my PC.  Whenever the printer error again.  While the screen is momentarily blue there is a code B840E9E2 displayed number.

  Sometimes my PC goes to Flash a message if the device connected to the USB port is not recognized.

  Hello

  Please try the steps below...

  1. While the printer turned on, unplug the power cord from the back of the printer.
  2. Unplug the USB cable from the back of the printer, as appropriate.
  3. Turn off the wireless router.
  4. Wait 30 seconds.
  5. Connect the power cord to the printer.
  6. Check if an error appears.
  7. When the printer is ready, make a copy. Check to see if the error is.
  8. Turn on the wireless router.
  9. Check to see if the error is.

• Black HP 802 ink cartridge is not compatible with the printer HP Deskjet 1050 - J410a [model: CH346A].

  I'm Sharjil Ahmed of Kolkata, in India and had bought theHP Deskjet 1050 All - in - One Printer - J410a [product model: CH346A] an online shopping website www.crazeal.com on December 18, 2011, where product information included that I will be provided 62 small HP black cartridge HP 62 small tri-color ink with the product. However, the box consisted of HP 61 small black ink cartridge HP 61 small tricolor ink cartridge.

  Also, I've registered my product on January 3, 2012 and found that ink cartridges that are are compatible with my printer 802 HP ink cartridge black (CH563ZZ) and bought the same, but when I tried to take a print, a message appeared that the HP 802 black ink cartridge is not compatible. That is why I contacted the service center HP of our region where I was informed that compatible with my printer cartridge is HP 61 only and the material of my printer is not compatible HP 802.

  Please help because I was not able to find HP 61 anywhere in my community.

  [Personal information]

  Hi sharjilahmed,

  802 cartridges are right for your region. If you bought the printer from one region other than the India, you will need to contact technical support, so they can help the region getting changed on the printer. Contact for the India numbers supports below.

  DeskJet, inkjet all-in-one, LaserJet, LaserJet all-in-one entry level:

  0047 200 1800, 1800 425 7737.
  0124 387 7300, 0124 234 0917

  

• Z6200 - printhead status: unknown, impossible to load the print heads.

  Hello

  I am a user of HP DJ 5500 long and just before Christmas, we have invested in a Z6200. Right now, I have a problem that happens with him because he is stuck in a loop trying to replace the printheads.

  I spent some time trying to reinstall the print heads and I tried the suggestion for the Z6100

  Nothing I've tried has been able to clear this loop. Is there a way to do a hard reset, then insert the PH as new? Or is that what makes the above method? Right now, I'm off the printer and the print heads on.

  Any help would be appreciated massively, I had to do this thing up 3 flights of stairs and still have not actually seen print!

  Remove all the ink cartridges and the print head if you don't have it already. Turn on the plotter and you will be asked for supplies, don't know if the ink cartridges and printheads first. When it asks to insert the items one at a time and the blinking icon must return to solid. Maybe your have one or several heads wrong causing the problem. If it rejects a print head print head must be indicated on the display as to which one is causing the problem.