Toshiba PX1267E - 1 32 - USB on every PC problem

Similar Questions

• Drive external HARD Toshiba PX1267E - 1 32 cannot be properly detected/installed

  Hi everyone, I need help.

  I have a Toshiba PX1267E - 1 32 external hard drive that I used on my PC under Windows XP. Yesterday, I bought a new laptop with Windows 7. When I plug the HD via USB, it is said that it cannot be properly detected/installed.
  It does not appear in 'my computer' and I really need to transfer a lot of data on my new laptop.

  I can do to make it work?

  Are there drivers for Windows 7? I can't find my original CD

  Any help is very appreciated. Thank you

  Hello

  Looks like a HARD drive contains a preinstalled software that is not compatible with Win 7.
  I'm not sure if this will help but try this:

  Connect your HDD to the other no Win 7 PC
  Select the CD drive with your browser (password)
  Run the ONSPCLCK.exe (or another exe file which controls and password.)
  Select 'Options '.
  Select "Disable security password"
  Enter your current password
  Unplug the HARD drive
  Connect the HARD drive to laptop with Win 7 OS.

  welcome them

• Problem with a Toshiba PX1267E 320 external drive

  Hi all

  I have a problem with a Toshiba px1267e 320 external drive, when everything was ok with it I would like to move on and the blue led would come and change blue /violet as it was found on my laptop, a small vibration could be felt if I handled the case which indicates that the d/d engine was on.

  After that fateful morning I turned on one explores in my computer and found no ext drive, checked the blue led disc on affected the case allowed to detect any vibration, eclipsed the reader of the case put my ear to hear low clicking.

  I removed the device and connected to shopping cart, this time I could feel the engine goes, connected to the laptop, new hardware found made my computer explore and didn't find any drive, Device Manager enabled and found it so I uninstalled and reconnected the usb with the same result.
  I don't know what to do next.

  I had a Word with computer store if they could recover some time I wait they told at least 6 hours work, if possible (don't want to shop)
  Bought me another model of the same digital Western not and new power to try to exchange the electronic circuit just in case he finds also the and/or possible fault we power/s but I'm clutching at straws here.

  Anyone of you guys, here you have something like this happen? any suggestions?
  I'm curious to know what they were going to try in the store to retrieve even if he said that he could not guarantee the results.
  I would appreciate any helpful suggestion (not throw it in the trash)

  > I removed the unit and connected to shopping cart, this time I could feel the engine goes, connected to computer laptop, new
  > hardware found made my computer explore and found no drive, checked Device Manager and found it so I
  > uninstalled and reconnected the usb with the same result.
  > I don't know what to do next.

  I think that the external HARD drive is dead
  Maybe it s a head crash which would explain the low clicking and other noises
  Unfortunately, I have this case you can't do anything

• Cannot access the drive HARD Toshiba PX1267E - 1 32 - file ONSPCCH.ini problem

  I have a Toshiba PX1267E - 32 1 external hard drive as well. It was working fine with my Vista Home Premium OS and has all my data backup on it. It has been password protected.

  My desktop HARD drive failed last week and was replaced and an old recovery disc of 12 months used to rebuild.

  I then tried to access the external HARD disk to restore the backup I ran the day before the accident, but when I enter the password (that I know is certainly correct) I get the same error as others posting here. He suggested that the input data does not match the information contained in the ONSPCCH.ini file.

  I can't disable or change the password as will erase all the data on the external HARD drive. The previous messages direct me on the site of Toshiba, but the options to download an updated driver is no longer correspond to the options available online.

  Help, please! :-(

  Paul

  Hello

  Strange what s...
  But someone pointed out that he could solve the issue with another USB cable. Did you check that?

  It s worth a try! ;)

  Welcome them

• Toshiba Store Art 4 USB 3.0 1 TB works not with USB3.0 or USB 2.0 port

  Hello
  I have a big problem with my external hard drive and I hope someone can help me.

  Here's the thing:

  I used my external drive only on computers that don't have any port usb 3 and all worked well. The drive has been used only with usb ports 2.

  Now, I got a computer with a usb port 3 and I was happy to be able to use my external hard drive at full speed.
  Has been fine until I wanted to transfer a file using my drive.

  The disc has been recognized either of usb ports 2. The NTFS partition is a partition BRUTE! I had to ' chkdisk/f G:' to make it work again on my usb ports 2. And some files were missing!

  Then, back on my other computer (usb port 3), the contents were not the same! I mean some of the files that I deleted when it is plugged into usb 2 returned when plugged usb ion 3! And then, back to the usb 2, partition became RAW and I had ' chkdisk/f G:'... once again!

  So, to make it as simple as possible, after some testing, it seems that the drive can only be used on the usb ports 2-only on ports usb 3 but can not be used at a time, which is very annoying for a portable external hard drive.

  I tried to format the drive to my usb port 2 and return on the usb port 3, the content came as if I had never formatted it and then back on the usb port 2, the RAW score again...

  I use Windows 7 and 8.1 Windows computers.

  Someone at - it experience that? What is the drive (Toshiba Store Art 1 TB USB3 4)? What is the USB 3 specification? Is - Windows 7 or 8.1 drivers?
  And above all: what can I do?

  Thank you very much!

  This external plug & play Toshiba HDD supports two USB standards: USB 3.0 and USB 2.0
  HARD drive around needs bus power 900mA to work correctly.

  The USB 3.0 port supports this standard 900mA. The USB 2.0 port allows only to 500mA.
  If in case the HARD disk is not working properly connected to the USB 2.0 port, I recommend you to use a USB cable to Y in order to connect the 2 ports USB 2.0 HARD disk.

  I have no idea why the content on the HARD drive is different, but from my point of few of the USB standard does not affect content.

  In my opinion, the HARD drive wasn't working properly using a USB 2.0 due to the low power.

  By the way: this HARD drive supports some additional features like the ability to oversight function and monitor to alert of the disk space that sends a alert when there is not enough available storage space.

  For advanced users, Toshiba has added the ability to customize the backup routine, including the ability to select only the most common file types for backup and change how many times a backup takes place.

• HARD drive toshiba px1267e - 1 g 32 does not

  I got my drive HARD Toshiba PX1267E - 1 32 for about 18 months, and it worked fine. However, all of a sudden it has stopped working, it is no longer appears on my desktop. Previously, it was password protected, and the password box will appear first. When the password has been accepted it would perform a scan of the drive and I would be able to as I wanted. I have not updated anything on my PC or nothing changed in my knowledge, then why is no longer usable? The password box is not also be displayed, I am unable to find the disc that came with it.

  I am running XP.

  Please help as there is a considerable amount of data out there that I can't access.

  Hello

  I found an interesting announcement of master of Desaster under http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=126217

  Please check it out!

• Where can I buy this Toshiba Notebook Docking Station/USB hub?

  Where can I buy this product in the Denmark or in an online store at the Denmark/Europa?

  * Toshiba Notebook Docking Station/USB hub *.

  Product link: http://www.ubergizmo.com/15/archives/2006/07/toshiba_notebook_docking_stationusb_hub.html

  Thank you.

  Danish:

  Kuhu kan jeg kobe ovenstaende USB Docking med 5.1 Dolby Digital? I Danmark/Europa online store?

  Tak

  You will find this Option on ebay or many other online shops. Just look for the Toshiba PA3390E or PA3390E-1MPM partnumber with google or eBay.
  I hope this will help you.
  CU

• Problem with HD external Toshiba PX1267E - 1 32

  Hi all.

  I had an external hard drive Toshiba PX1267E - 1 32 for awhile now and its fantastic. I normally run on Windows XP, and recently, I started using Windows 7.

  When I plug in the external hard drive in, the password box opens, I get the password, indicates the password has been entered successfully, and I click ok.

  The HD is supposed to rev and load the data as another drive partition so that I can access the data stored on the hard drive of course, but this isn't the case on Windows 7. Nothing happens after I have well validate my password.

  I also tried removing my restriction password, but all that load is the password of the external HD partition. I am running in administrator mode, but nothing helped.

  Can someone please tell me how to load to the top of my "data" of the partition HD external Toshiba PX1267E - 1 32.

  Thank you much in advance,

  VoxT3R,

  Post edited by: VoxT3R

  Hello

  I'm not quite sure if it will work, but you can try to access the m windows * disk management * and can check if the HARD drive or partition could be formatted.

  Perhaps then the HARD drive would be recognized in my computer (Explorer) and you can access the HARD disk.

  Select this check box.

• Error message try install drivers for Toshiba Multimedia Center Audio/USB Hub

  Hello

  I use a Toshiba Satellite P100-102 and a Toshiba Multimedia Center Audio/USB Hub SB0500 with the new Windows Vista Ultmate.
  When you try to install the drivers for the multimedia center the following error message appears:

  A service install article this INF is invalid.

  I also tried to install the Center Multimedie with the installation CD, but it doesn't, because the installation program could not identify the USB hub even if the USB cable is connected to the Media Center and the laptop.
  I also tried to find drivers for Vista on the Internet, but without success.

  How can I solve the problem?

  I would be really happy if you could help me!
  Thank you!

  You are 100% sure that this driver was designed for Vista?
  Maybe it s is not compatible with the new Vista operating system and it works only with XP

• 64GB Flash Drive Question; My windows 7 Home Edition premium PC see 32 GB on a Toshiba Trans memory 64GB USB flash drive.

  My windows 7 Home Edition premium PC see 32 GB on a Toshiba Trans memory 64GB USB flash drive.

  How to recognize all the 64 GB?

  A little late to the party, but here's a site with the solution

  http://geekswithblogs.NET/Ilich/archive/2013/04/26/recovering-unallocated-space-of-a-USB-flash-drive.aspx

  It shows you how to use "diskpart" in cmd menu to fix it.

  -Dan

• Toshiba TransMemory 4 GB USB Flash Drive shows only 4 MB

  My Toshiba TransMemory 4 GB USB Flash Drive shows only 4 MB

  I'm trying to solve this problem, but I can't

  Please someone give me a solution...

  thanx.

  device class GUID: {4d36e967-e325-11ce-bfc1-08002be10318}

  Hello

  Thanks for posting your question on the Microsoft community.

  I would like to know some information about the problem so that we can help you better.

  Flash DRIVE shows 4 MB when it is connected to another computer?

  Thank you for details on the issue.

  This problem can occur because the parameters or corrupt device drivers.

  I would suggest trying the following methods and check if it helps.

  Method 1:
  Run the hardware and devices Troubleshooter and check.
  Reference:
  Open the hardware and devices Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  If this does not help, use method 2.

  Method 2:
  The USB key format and check the issue. Please follow these steps:

  a. Click Start and type cmd in the start search box.

  b. right click on cmd , and then click on run as administrator.

  c. type the following command at the command prompt and press ENTER.

  format (the drive letter):

  Note: "(Driver Letter):" as "E:" is the letter assigned to the USB key in Windows Explorer.

  d. now, type and press ENTER.

  Note: Formatting a USB drive will destroy data stored in it. Please make sure that you back up the data you want to keep before you begin.

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Toshiba Dynadock U Universal USB docking Station

  I have a Toshiba Dynadock U Universal USB Docking Station (PA3927U-1PRP) that I have connected to my Dell XPS17 laptop via a port USB3. Everything works fine except for the Ethernet connection and the laptop does not seem to see. Under network and Internet > network connections the connection does not appear in the list, but the connected network of light at the back of the dock is flashing, indicating a connection at least to the dock.

  In addition, under Device Manager. Other devices, dynadock Ethernet is listed with a yellow exclamation point and says there is no driver installed. When you try to find the driver, it can be located anywhere.

  I returned a Targus USB3 docking due to the same issue and now think that this could be a Windows 7 problem.

  Any advice on troubleshooting?

  16/03/12: I called Dell support and they walked me through the uninstall of all the docking drivers, then relocation. everything works fine now.

  Hello

  1. it worked before?

  2 have. what stage you tried to find the driver?

  3. are you able to use other devices?

  4. have you tried in another computer?

  The yellow mark could be due to the possible corruption of the drivers.

  These steps can help you:

  Method 1:

   

  Update driver by following the steps in the below link:

   

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

   

  Method 2:

   

  a. Click Start > type in devmgmt.msc in the search box, press enter > right click on the device and click on uninstall. And restart the computer.

  b. access the website http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/home.jsp

  c. click on the download option and download the latest driver.

  I hope this helps.

• Laptop HP Pavilion dv6 - 3016 s: USB (device not recognized) problems

  Hello

  on my laptop (Pavilion dv6-3016sl, bought in 2010) for a few months the USB connections give many problems with different devices.

  The first issue with the key external communication 3G (ONDA TM201) Internet: the USB key (which has worked for many months) is not recognized. I tried to reinstall the software and drivers (get the latest version from the website of the producer), but it is always unclear correctly.

  The visible in USB Device Manager error message is "cannot start (code 10) machine.

  Recently other USB devices have ceased to be recognized: powered USB Hub (HAMA USB 2.0 Hub 1:4, bus) and the Wired Optical mouse (Logitech).

  It is also not possible to install new USB devices (for example, a device of wireless sync to a cuff of training).

  I've done many controls of Microsoft on the integrity of the system, and I frequently run the Windows Update to be aligned to the latest version of the fix.

  You have any suggestions to analyze/fix this locking problem?

  Thanks in advance,

  Moreno

  I know this may seem a rather harsh to suggest method, but at this point, I suggest backup of important things on your laptop computer to online storage. This is because you can use the USB storage for the moment.

  Once you have done this, it's time to locate your drives support usb recovery and licenses of all other programs that you have installed or recovery.

  Start on the recovery media.

  Use the HP Recovery Manager to perform a factory image recovery which will reinstall the operating system.

  Since you say that the usb ports work under Linux, then reinstalling the operating system Windows needs to solve the problem of usb port that you are experiencing.

• USB mass storage device problems

  In recent weeks, I was unable to read the files on an SD card and a USB key.  For both the SD card and thumb drive, a pop-up message says the card is not formatted and asks me if I want to format it.  Both drives work fine in another computer Windows XP and a Vista computer, are formatted and data on them.

  Device Manager shows no conflicts.  I tried to uninstall everything under "In Bus USB controllers", but the problem persists.

  I did some research on Google but nothing seems to work.  My computer is a Dell Dimension 4700 running XP, SP3.

  Any help would be appreciated!

  Sorry nothing worked for you.

  TechNet Forum can be better able to help.

  http://social.technet.Microsoft.com/search/en-us/?refinement=112&query=USB%20Mass%20Storage%20Device%3A%20%20Unable%20To%20read%20Files

  And there is the Dell Community

  http://en.community.Dell.com/support-forums/desktop/f/3514/p/18838276/18961262.aspx#18961262

• SOS cuando mi usb conecto me appears problema al iniciar WLIZKLIC.init y no is abre

  SOS cuando mi usb conecto me appears problema al iniciar WLIZKLIC.init y no is abre

  SOS
  Please select your language in the drop-down list at the bottom of the page to post your question in the language of your choice. The forum in which you've posted is for English only. If you can't find the desired language, support for additional international sites options are by following the link below: 

  Please, select su idioma in her lista desplegable anterior to send you in el idioma of choice su pregunta. El foro Québec ha published're para frances only. If usted no encuentra el idioma no desee por encima of las options para support otros destinos international themselves can find following el siguiente enlace:
  

  http://support.Microsoft.com/common/international.aspx