Tray switching printer problem

Similar Questions

• PCL5 printing codes to turn off paper tray switching when the tray is in the paper

  We have a HP P4015n with 3 trays, tray we letterhead, tray 2 has plain paper, tray 3 preprinted forms (all dimensions 8.5 "x 11" paper ").  This is related to a Linux system with printing from a legacy software - they are mainly text documents that have integrated the PCL control codes.

  The problem, when a drawer is empty, print will continue to the next state bar, which can have a header of letter or preprinted form, etc.

  Can I turn off automatic tray switching?  Either using a code printer PCL or via the printer control panel?

  If I print on tray 3, this tray is empty, I want the printer to wait until the tray has paper once again and do not use a different tray.

  I played a bit with the 'document type' (letterhead, pre-printed form, etc.) setting found on the built-in printer web page, but when I send a job there, the printer needs someone to hit the 'OK' on the printer. I guess that the printer is looking for the paper incorporated in the corresponding document type.  Is there a print PCL code for that?

  I have done research on PCL5 printer control codes and can not find, or another command.

  Thanks for any help,

  This should help you:

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?lang=en&cc=us&ObjectID=bpl05272&JumpID=reg_R1002_USEN

  On the other hand moving up to the next plateau, depends on the printer.  Some let not work continue to the next bar if the paper type is defined differently, but it is more common that the printer will just continue.  The only solution I have found is when big jobs you know will exceed capacity of the tray should just make sure that the right paper is in all stores.  The other thing is too, to keep the full trays (just make sure to put the fresh paper under the paper that is in the status bar to reduce interference issues).

  I am including the link to the history of PCL/PJL because inside under the additional Documentation, it links to PDFs of the technical manuals detailing everything that you could ever want to know about hand coding for printing using these languages:

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?objectID=bpl04568

• HP Envy 7640: MacBook Pro photos to photo tray printing problem

  Printer does not print photos from the Mac to the photo tray.  Prints to letter size tray.  I deleted the printer, readded it, updated the drive, the printer of the stop, pulled the plug of the printer, pulled the plug from the wall, stop comptuer and then all restarted.  I can re - print a copy of a photo to the photo tray so I know it works.   Keep constantly wasting trying to print to the photo tray.  It seems to be the link between the Mac and the photo tray.  Extremely frustrating!

  Hi summerdays,.

  You are welcome! I'm glad your problem is solved!

  If you found my post useful, please consider tagging 2 Message like "Accept as Solution" so that someone else in the community who may encounter this problem can more easily find the solution.

  Best regards!

  "Please click the Thumbs up icon below to thank me for having responded."

• printer problem - with is not the automatic tray settings

  original title: printer problem

  I have a HP printer, printing of MYOB via terminal server on a Server 2003-based computer. Previously, I had the printer installed under different names, i.e. statement, invoice & delivery notes. Each instance corresponded to a different tray for printing. I have now lost the ability to use separate trays. Whenever I feel it comes back to "auto-select" I have three shared printers on the Server Desktop XP pro SP3 & can be printed on one or the other. Just can't hold the tray settings more. Can anyone suggest a solution?

  Hello

  Because the question you posted is related to windows server 2003, I suggest you post this question in the Windows Server forum.

  http://social.technet.Microsoft.com/forums/en-us/winserverprint/threads

• Where can I find better, more correct instructions to solve printing problems by editing prefs.js?

  Instructions of "resolve printing problems | Firefox Help, line 6. Delete all the lines in prefs.js that begin with print_ and save the file. "do not match what is actually in my prefs.js file.

  In other words, he didn't y not the lines * beginning * with "print" or "print_". However, the string of five characters 'print' is * very * many times buried deep in a line of characters, but never at the beginning of a line and rarely followed by underscore. So I have no idea what I'm actually planned to do to solve my problem.

  It seems to me that this is just a badly phrased statement that might be more appropriate for someone who is familiar with the codification and development of software, which I'm not. I don't have the time, experience or knowledge to understand. I need more literal/explicit/specific instructions.

  The printing problem I have is that I have to print via WiFi to a printer in another room wired to another computer, and Firefox seems to switch or possibly reverse scales fonts for information of margin and the text of the Web page. In other words, the title of the document, date, time, prints etc very wide and the content of the page text prints almost too small to read.

  If there is a lot of user set prefs involved that need to be reset, then it's much easier to delete related lines of the prefs.js is each of them with the button straight on the topic: config page and click Reset.
  This is the main reason (single) to edit the prefs.js file.

• HP 8630 will authorize specifying the second tray for printing shortcut.

  All-in-one printer inkjet HP 8630 range Pro will not accept specifying the second tray for printing shortcut. Indicates that the parameter is a conflict and obliges the "Printer Auto Select" option instead of allowing me to select "tray 2" which is an option. I like to keep a white shining in tray one and photo paper in tray 2 and made the my HP 8500 Pro for everything that I needed to do is select the appropriate shortcut configured by me to print the photo. Operating system is windows XP Pro.

  I want to start by apologizing for not picking up on this on your first post. The 8630 2nd tray print 8.5 x 11 or 8.5x14 paper.

  The reason why what impression pictures he says that there is a conflict and if he chooses the main tray is because there is no choice. The printer does not have the ability to print photos from the 2nd drawer. If you're looking to load media into the trays you need 8.5x11 or 8.5x14 in the 2nd tray and other media can be loaded in the main tray.

  In the printer's Specifications in paper output specifications > paper tray capacity & Supported sizes of paper in you shows what's available for trays.

  Change the source of your document must make all the problems disappear.

  Kind regards

• I can't HP printer works again. Configuration, driver, switch print or USB port does not.

  I got the printer doesn't work after downloading the update and the usefulness of HP. They were put in a folder of Tamp, I think.  New utility and install HP downloads don't work this time. In addition, cat pulled the printer USB cable and I don't know where it was connected to. Message Windows XP says out connection or something about switch printing don't no configuration?  I don't understand any of this, can someone ' a please talk me through it? I have a lot of work piled up, legal and medical stuff and really need my printer.

  Hello

  What is the model number of your printer?

  It is sufficient to indicate the complete error message you receive.

  
  Method 1: you can refer to the documentation that came with the printer for printer connections. You can check the following HP link

  http://www.HP.com/United-States/consumer/everyday-printing/Wireless/USB-wireless-setupb.html

  
  Method 2: you can see the steps outlined in the article below to solve printer Windows XP problems

  Resources for the resolution of the printer in Windows XP problems

  http://support.Microsoft.com/kb/308028

• HP ENVY 7640: HP ENVY 7640 PRINTER PROBLEM

  Plateau photo guides which seem to be on springs are to tight to allow the photo paper to pull into the printer, I use the main tray to print photos and continue to change paper, can amyone help.

  the printer was still 6 months warranty left on it.

  Hi @keith8179! You are welcome and thanks for the reply,

  I'm happy to hear that you received a replacement printer and it works fine.

  If you have any questions in the future any HP products, you can always reach us.

  We will try our best to help out you.

  Take care

  Have a great weekend!

  Please click "accept as Solution" If you feel my post solved your problem, it will help others find the solution.

  Click on the 'Bravo, Thumbs Up"at the bottom right to say 'thank you' for helping!

• Lexmark printer problems

  I can't get my lexmark X 2500 printer to communicate with my computer.    Also I can't access the active domain forest.  . Any help out there?

  Hello

  1. you can unplug the printer and turn the printer off. If it's wireless power so just off the printer.

  2. do services.msc and stop the print spooler service.

  go to run the command and coil type, click OK.
  It will open the folder of spooling then please, open the PRINTERS folder, and delete everything that you see in the PRINTERS folder.
  After deleting restart the print spooler service.

  3. now connect the printer with the computer and switch.

  4. now check your lexmark printer services in services.msc.

  lexmark printer services from «lx_...» ». If they are disabled or stopped, you can start and make the automatic service.

  5. now try to print.

  6 - If you cannot print, so just go to / program & features of the control panel and uninstall the Lexmark X 2500 driver.

  7 - restart the system and download the Lexmark X 2500 driver of

  http://support.Lexmark.com/index?page=product&segment=support&ProductCode=LEXMARK_X2500&locale=en&UserLocale=en#1

  8. install the printer.

  He'll probably adjust your Lexmark printer problem.

  Thank you
  Imen

• With no paper in the tray, the printer has no error light. As soon thre is paper in the printer, I get error lights.

  Original title: what a printer problem.

  When no paper in the tray, my HP PSC 1400 no flash no lights error, however when the cartridge is mounted on the inside, it flashes error lights. As a result, I can't take a printout and I feel buried in the huge pile of unfinished work. The window so that HP behave as if they have nothing to do with it or the problem is bigger than their power; Well, I don't have to go, but to spread my shirt in front of you as if I'm begging!

  Contact HP support or post in the forums.
  What is your shirt has to do with it?

• HP business inkjet 1100dtn how choose the paper tray + stop printing calib random pages.

  Hello. After I finally got my 9 year old HP business inkjet 1100dtn to start printing with 8 years, print heads who threw coward (printer output) for the past 2 years last night, progress post it here:

  http://h30434.www3.HP.com/T5/Ink-toner-cartridge-printhead/HP-business-inkjet-1100dtn-first-wouldn-t...

  Now I wonder how I can choose which paper tray to print from. Since I use Windows 7 and you must use the driver for hp business inkjet 1000, I guess that the problem here? Someone else you have a solution or better another driver which works better?

  In addition, the printer keeps print calibration pages after each printing I do. The print quality is still not 100%, if only he keeps trying to calibrate because the calibrationpage it prints is of too poor quality?

  Any help would be appreciated.

  Ben of the Norway.

  I tried the driver for the Microsoft 1200dtn instead of the 1000dtn that HP has suggested. Now everything works. Duplex, tray selection, etc. Good times. :-D

• Print problems with the recent update to Version 10.11.5

  Print problems with the recent update to the Version of El Capitan 10.11.5.  Cannot print to my Epson and Samsung printers after update to new IOS.  Print jobs get hooked on my Mac Pro.

  Roger 510 wrote:

  Print problems with the recent update to the Version of El Capitan 10.11.5.  Cannot print to my Epson and Samsung printers after update to new IOS.  Print jobs get hooked on my Mac Pro.

  Have you checked with Epson for an updated printer driver?

• From updateing to 8.1 WIndows printer problems

  Until I updated to Windows 8.1 other months everything was going well on my new laptop, then I went to something of my HP Photosmart B109n scan and it did not work because the pilot was now missing and the application that replace the HP printer driver HP is useless.

  On the advice of the HP site, I tried to download the new driver, but it wouldn't go, he said I had to remove the exsisting installation but when I try it just reboots the computer, but is still there afterwards. It turns out the uninstall has disappeared from the current and installation does not appear in the installer I downloaded.

  As a last resort, I used the system restore but has not only the printer has not changed but now some pre-loaded apps will not work and ask to renew the license of developers.

  I'm a lost what to do next - please help!

  Your laptop is not known to me, but in the case of update 8.1 Win, you should check this update from Toshiba to win 8.1 page: http://www.toshiba.eu/innovation/gen...ws8_1-message/

  There you can check if the Win 8.1 is supported on your laptop and how to perform the Update step by step for Windows 8.1
  Some drivers must be uninstalled and updated after installation of update 8.1 to win!

  Regarding your printer problem:
  Each manufacturer of the printer contains own drivers for the Windows System.
  We don't know me if HP released Win 8.1 compatible drivers for the printer Photosmart B109n clean, but to be honest, this problem is not related to the Toshiba laptop. If you have problems using HP printer under 8.1 to win, you should visit the support page of the printer manufacturer for troubleshooting tips and workaround solutions.

• Eny HP 4520: Printing problems in word Document with photo

  I just purcahsed a HP Envy and I use the function print via the wireless option. I have a word document that I was able to print in the past which has an image inserted into the document. All in the words fine printing copies only the upper left photo f. When I show preview before printing, it shows that if the whole of the document will print correctly and the image should print very well... I have attached what print preview looks like and what actually prints

  Hi @dmanyeah,

  Thank you for reaching out to the forums! I understand that you encounter printing problems in Word, the full image is not printing. Thanks for providing the screenshots. I'd love to help you.

  Try to print a picture from another application to see if you have the same problem.

  To exclude the driver, install a generic driver to see if you have the same results.

  • On the computer, go to start, devices and printers, right-click on your printer and select printer properties.
  • Click the Advanced tab and click new driver, and then click Next.
  • HP Deskjet 9800 by selecting in the list or the Deskjet 990c printer, click Next, Finish, and apply the settings. (you can always go back and revert to the original printer driver)

  What version of Word are you using?

  If the problem is resolved and you appreciate my help, please click on the "accept as Solution" and the buttons 'Thumbs Up'. Let me know how make you out. See you soon!

• Printing problem on deskjet 4510 with windows 8.1

  I bought a new deskjet 4510 and have installed via usb on my desktop running windows 8.1. This isn't the impression through products of ms office word, excel etc. and either through wordpad. I can print Notepad files and pdf via adobe reader software.

  I tried HP print and scan doctor who did not find any problem with the printer and print a test page.

  I tried uninstalling and reinstalling, setting the printer wireless to the top but could not do print.

  I looked at the help on this forum and also tried selective installation, disabling all services except when starting microsoft services, but the problem remains.

  Help, please.

  Hey @rshri7869.

  Welcome to the Forums of HP Support!
  
  I understand that you meet your HP Deskjet printing problems in advantage 4510 series e-all-in-one printer to your computer Windows 8.1. You have included a large number of useful information in your post, so thank you. After reviewing the troubleshooting you have already finished, I came to the conclusion that what you feel is a conflict of driver on your computer Windows 8.1. To fix this please follow the steps below.

  How to add another driver:

  1. Open the Start screen (by selecting the windows start button in the lower left corner or by selecting the "Windows" button at the bottom left of your keyboard to the left of the 'Ctrl' key
  2. In the start screen, type "Devices and printers"
  3. If the option devices and printers automatically fills, click settings at the top right and then click on devices and printers.
  4. In the devices and printers folder right click on your series Deskjet 4510 and left click on printer properties
  5. Left click on the Advanced tab
  6. Left-click on new driver
  7. When the new window driver opens just hit 'next' until you see a list of manufacturers on the left and a list of printers on the right.
  8. Select HP as the manufacturer on the left
  9. DeskJet 9800 select the printer on the right. If Deskjet 9800 is only select "Windows Update" at the bottom left and once the update has been completed, you will be able to select Deskjet 9800.
  10. After selecting Deskjet 9800 hit next complete the new driver Wizard
  11. Under the printer properties window, select 'Apply' but do not hit OK
  12. Select the general tab
  13. Rename your printer in HP Deskjet 4510
  14. Click OK
  15. Finally, right-click on your Deskjet 4510 series once more and click on Printing Preferences
  16. Left click on the paper/quality tab
  17. Left click on the dropdown 'Normal' for the print quality down to the right and change its normal fast
  18. Press apply and OK
  19. Try to print!

  Please let me know if the steps I have provided to resolve your problem. Good luck!