typing not appearing is not in the secondary monitor

Similar Questions

• 'VMware Workstation does not support the multiple monitors feature in other guests'

  When I click the icon "Cycle multiple monitors", I get the message "VMware Workstation does not support the multiple monitors feature in other guests."  Google found me no hits on it.  Anyone know what that means or how I could get multiple monitors to work?

  The host OS is Windows 7 Professional x 64 with service pack 1 applied.  The guest operating system is Debian Linux, version 8, also 64-bit.

  $ uname - a

  Linux debianvm 3.16.0 - 4-amd64 SMP 3.16.7 - ckt9-3 #1 ~ deb8u1 Debian (2015-04-24) x86_64 GNU/Linux

  The virtual machine was created with VirtualBox, then exported to a .ova file, then imported into VMware Workstation.  VMware Workstation is version 11.1.2 build-2780323.

  -Steve

  Hi Steve and welcome on VMware communities!

  With your virtual machine turned off the power, go into the settings of your virtual machine and on the Options tab, under general, select the client OS type: Linux > Debian 7 64-bit.  Then try to turn your virtual computer and see if it works.  (8 debian is quite close to Debian 7.)

  See you soon,.

  --

  Darius

• 10 Firefox: Bookmarks Menu sparkles and is unusable on the secondary monitor

  After the upgrade to Firefox 10, the menu of bookmarks (and other features of the user interface) began to blink when selected. This only happens on my secondary monitor. It does not affect my main monitor. It makes Firefox unusable on the secondary monitor.

  Try turning off hardware acceleration.

  • Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.

  If disable hardware acceleration works then check if there is an update available for your graphics display driver.

  • https://support.Mozilla.org/KB/how-do-i-upgrade-my-graphics-drivers

• How to configure the secondary monitor to be a principal?

  I can extend my desktop to a secondary screen, but when I try to set the secondary monitor as primary monitor screen goes white on the secondary monitor. How can I set the secondary monitor as master?

  Hello

  This option is not possible with laptops. As you can see, this option is grayed out and the screen of the laptop is on a primary without any possibility to change.

• Tecra M5: How auto to activate the secondary monitor?

  Hello

  When I my Tecra M5 with full-screen dock and turn it on, I would like that it allows to automatically activate the secondary monitor and set it on the primary monitor. Currently, when home he doesn't - and I have to manually enable the second monitor and place it in the primary.

  Any ideas?

  Thank you
  Fraser

  Hi Fraser

  As far as I know it of not possible to set the external monitor as the main screen on startup.
  But what the graphics card is installed on your laptop?
  On the Toshiba site I found a new version of the Intel display driver.
  But is it possible to automatically activate the external display and set it to the main monitor without using the docking station?

• Notepad opens off screen on the secondary monitor

  Hello

  Please bear with me as I'm NOT a Windows person - I usually run Macs. but I'm back to my parents and it's their Windows box.

  They are running XP Home SP3. This problem affects all user accounts.

  Basically they run a 2 monitor setup - a LCD, a somewhat old (although still perfectly!) Dell CRT reference. The question is about the latter.

  Note, I asked my father and he assures me that no applications have been installed since he first noticed this problem. I tried to solve problems better than I can, but I don't have Macs, Windows!

  Basically, the notebook want to open on the secondary monitor (running its native resolution of 1024 x 768) completely off the screen (to minimize it, maximize, and close buttons are unavailable). The only way I found to fix it is to reduce the resolution of 600 x 800 and then back to native, but he is a bit of a PITA bread as she has to do every time. As far as I know, the notebook is the only application affected and no new software--or drivers--have been installed since this question bagan occurring. Windows Update is configured to run automatically, even if I don't remember the last time she did it.

  I'm sure there must be a quick solution, and easy for this question - if someone would just enlighten me as to what it could be!

  Thank you very much

  Sarah

  Please bear with me as I'm NOT a Windows person.

  And I'm not a person dual monitor, so I'm not positive that it works.

  When Notepad opens, there will be a tab in the taskbar. Click on this and select move. Now, use the arrow keys to get to the screen. Close all other windows except this one and use the cursor to drag the message to the format full screen, or any size you want. File | Output and Windows expected to retain the size when you open it again.

  Bruce Hagen MS - MVP [Mail]

• How to view Subvi on the secondary monitor with remote panels?

  I try to have a Subvi, called from a VI hand open on a secondary monitor.  I use panels remote to control my main application, which is open in a web browser on the secondary monitor.  I tried to adjust the monitor properties VI - Position of the immediate window - to '1' and also tried to set this value programmatically by using the node property of front panel, but doesn't seem to work.  My Subvi always appears on my primary monitor.

  I use LV 8.6.1 RT and my application is running on a CRIO.

  I'd appreciate any help.

  Thank you

  Dan

  
  

• Safari opens on the secondary monitor

  I have two monitors 27 "and Safari insists on opening on the secondary monitor, no matter what I do. All this experience and have you been able to solve it?

  Whenever it happened, it was because I dragged a window or a tab there.  At one point, I closed Safari.  Then when I opened it again, he would open the 2nd monitor.

  What I did:

  When Safari opens on the screen 'wrong', enter a tab open and drag it to the other monitor, then let go.  You should have Safari open on both monitors.  You must also have a menu bar of Safari on both monitors.  Open the window on the monitor that you don't want Safari to open with.  The Menu, file, close this window (command-W).  You should now have that a single Safari window open on the monitor of your choice.  Go menu, Safari, quit Safari.  Then try to reopen the Safari.  It should open on the screen of your choice.

  I can't find a setting for the default screen for Safari.

  If this happens again, make sure the last window you are closing is on the screen of your choice.

  I hope this helps!  Let us know...

• C20 discovered appears only not on the 2nd monitor after upgrade firmware to 6.1.1

  Used to run 5.x and if not on a call that the left monitor would display the menus and the wallpaper while the 2nd monitor would show the Self discovers C20

  If in a VC call key participants would be on the left monitor and discovered or presentation would be on right monitor

  When upgraded to 6.1.1 changed the scenario above:

  • If not on a call the left monitor would display the wallpaper and the menus and the 2nd monitor only show black, discovered in PIP mode on monitor left (codec is set to dual display)
  • If in a VC call, key participants would be on the left monitor and presentation on the right monitor but the display of the self are in PIP on left monitor

  Check the codec settings and everything is configured

  Thank you

  This is a common question. This is limitation of TC6 which will be set on TC6.2. Please, follow this topic:

  https://supportforums.Cisco.com/message/3965573#3965573

  Paulo Souza

• image / photo not appearing is not in the source monitor or program

  I work in Premiere Pro CC 2014. I can't see the pictures / images in the source monitor Panel or the program monitor. I can see the thumbnails in the bins, but when I drag the sequence or in the source monitor, the image does not come to the top in monitors. I can see the images in AE and in first Pro CC.

  I have reset the workspace. I restarted the computer. It does not matter what is the file format.

  Thoughts? Thank you.

  Hey!

  Have you tried to change the video rendering engine? If not, go to file > project settings > General and change the rendering engine video software of Mercury playback engine only. Click OK, and then select "remove previews."

  I hope this helps...

  Regalo

• Suggestion menu doesn't show is not on the second monitor. Firefox 29.0.1

  After the upgrade to version 29.0.1, I see in the drop-down menus suggestion on my second monitor.

  The menus show that only a small line black.

  This seems to happen on my secondary monitor on all the fields in the search bar, websites and connections.

  The menus still function, I can move through values with the arrow keys.

  I am Windows 8.1, Intel HD Graphics 3000.

  The main monitor works well.

  Here are some examples
  https://onedrive.live.com/redir?RESID=8F2CDA5FB6A9D21A! 913 & authkey =! ADamCtDU2Tbe2ok & v = 3 & ithint=photo%2c.jpg

  This could be a bug.

  Could test you with the use of Firefox hardware acceleration disabled? There are two ways to do:

  (1) temporarily to run Firefox in Safe Mode
  
  (2) turn off in normal mode of Firefox.

  # 1 :

  You can restart Firefox in Mode safe mode using either:

  • button "3-bar" menu > "?" button > restart with disabled modules
  • Help menu > restart with disabled modules

  Not all add-ons are disabled: Flash and other plugins still works

  After stops in Firefox, a small dialog box should appear. Click on 'Start mode safe' (not reset).

  Your tabs and non-private windows must be restored (unless you have configured to not save a history of Firefox).

  Any difference?

  (To return to the normal mode, exit Firefox and restart normally.)

  # 2 :

  "3-bar" menu button (or tools) > Options > advanced

  In the mini ' General' tab, uncheck the box for "use hardware acceleration when available.

  It takes effect after leaving and you launch Firefox, next time.

• Windows does not detect the external monitor after Blue Screen of Death

  Hi guys,.

  I currently have a problem with my second monitor, I installed the monitor (Acer G276HLA), it worked perfectly for about a month. Today, when I was working with SolidWorks, blue screen of death appeared 2 times and I have to restart my laptop. After the reboot, Windows does not detect my second monitor more, I tried my best but no luck, please me have this problems.

  I use an HDMI cable to connect the laptop and the screen...

  Best regards

  Hyouka

  Personal laptop is limited to the installation of other equipment, graphic monitor (s) push resources. If ram memory

  is maximally, & the BIOS settings are set to a different monitor, Direct X updates, graphics software are updated, then

  We should be able to run a reg monitor... Chk, go in run or cmd, type: DXDIAG run Direct X.

  Also, the BIOS settings are critical, uninstall the default, add new ones.

• Could not get the Source monitor and program to display together

  Hi, I use Premiere Pro constantly for about 6 or 7 years and have never had problems with the monitors Source and program appearing side by side in my workspace.  I've recently updated to CC and, in addition to having one monitor 'fixed' and a sudden 'floating' (I've unable to paste the two up, but would have a run on my second monitor) it was working OK. The last two days, I can't set both monitors. I double click on a clip in the project, and it is not displayed anywhere.

  My preference is to set the workspace to imitate CS5.5, but this option is sorting is no longer the problem.  I'm trying to go back to the previous workspace and it tells me that there is not.  I tried control boxes and uncheck the menu window. Any help would be appreciated.

  

  Source monitor can normally be added to any 'panel' by clicking on the Panel, then in the menu dropdown you show, by clicking on the Source monitor... then navigate to it by selecting the tab is in the Panel that was highlighted when you clicked.

  You can change the panels by "entering" a title as source or scopes or whatnot too and drag in or to another palette, with the possibility of having always appear (for example, if you then release in the area left highlighted a Panel, you drag in) to the left of other things in the control panel... or if you say leave in the Middle then it displays when you select the tab at the top of the Panel. Others cover it when you click on the tabs. I think that the help pages following (they aren't long) could you get:

  Use and customize workspaces in Premiere Pro

  Working with panels in Premiere Pro

  Using the Source program monitor in Premiere Pro

  Things have changed a lot since 5.5...

  Neil

• First Pro CC will not recognize the second monitor

  Greetings:

  I'm having a problem with the help of my second monitor to the output in CC PP.  I did the following based on another post:

  Try these two steps to check the transmission is enabled:

  1. go in the program monitor Panel menu > check "Allow to pass" is checked.

  2. go to Preferences > reading > check your 2nd monitor is present and active.

  What I get when I do it is a black screen that covers the top left of my screen at 1920 x 1080, the size of my other monitor.  When I save a project and use my second monitor for a sign, say under my belt, I'm able to drag the Panel above and use it, but when I save and reboot, the Panel is always on my primary monitor:

  Model name: iMac

  Model identifier: iMac13, 2

  Processor name: Intel Core i5

  Processor speed: 3.2 GHz

  Number of processors: 1

  Total number of Cores: 4

  (By heart) L2 Cache: 256 KB

  L3 Cache: 6 MB

  Memory: 32 GB

  Boot ROM version: IM131.010A.B05

  Version of the SCM (System): 2.11f14

  NVIDIA GeForce GTX 675MX:

  Chipset model: NVIDIA GeForce GTX 675MX

  Type: GPU

  Bus: PCIe

  The PCIe track width: x 16

  VRAM (Total): 1024 MB

  Provider: NVIDIA (0x10de)

  Device ID: 0x11a2

  Revision ID: 0x00a2

  ROM revision: 3707

  Exhibition:

  iMac:

  Display type: LCD

  Resolution: 2560 x 1440

  Per pixel: 32-bit color (ARGB8888)

  Main screen: Yes

  Mirror: Off

  Online: Yes

  Integrated: Yes

  VP2365WB:

  Resolution: 1920 x 1080 @ 60 Hz

  Per pixel: 32-bit color (ARGB8888)

  Display serial number: RDC104500162

  Mirror: Off

  Online: Yes

  Rotation: support

  I tried different confgurations in Preferences-> reading, but get the same result every time.  I have to force quit when I get the black box, I'm unable to access other options of PP.  Anyone encountered this, and if so, is there a solution?  I saw that there was a problem of "transmit", but that does not solve this problem.  Thank you!

  I don't hate replying to my own post, but I thought I'd post here how I solved my problem in case someone else ends up here with a similar one.

  To be clear, I have 2 monitors and when I activated transmit full playback screen would be superimposed on my workspace creation on monitor 1 even though I had specified to monitor 2 in my video device in the preferences > reading.

  It seems that during the last few months (I have a vague memory of it), I decided to check the "improvements" in the way Mavericks managed multiple monitors. I created two spaces in Mission Control, this is how Applications in the dock wins a menu extended options in the menu contextual (the one that appears when your right click the application icon in the dock). I knew that this extended menu was there because the site of Apple told me.

  From the OPTIONS menu on my 2 monitor setup are then ASSIGN to > all workstations; OFFICE ON DISPLAY 1; OFFICE ON DISPLAY 2; NONE.

  After trying the various options to see if the operation was consistent with the explanation of Apple and if I wanted to work with spaces, I decided that I don't have not so I removed the spaces that I created in Mission Control.

  Remove the deleted spaces these additional options ASSIGN to THE menu even though I wasn't aware of this at the time.

  A few days later, I went to allow the TRANSMISSION when editing in Premiere Pro (that I had used successfully before) than having the problem described in this thread. I stupidly credited this problem for a recent update of CC and in the release of 2014 CC does not correct it, I started to look elsewhere.

  Cut to the end and the way - after proving that a new Mac user account test does not show the problem, I have returned to my user account, active areas in control from Misson, changed the menu ATTRIBUTE to None for Premiere Pro (default), then the TRANSMISSION function worked correctly, showing a full picture has been assigned to the correct window.

  OK, the last paragraph may suggest I knew what to do but I have not, I had spent a lot to research in the library of the user to search for differences, until I came across this.

• Video chip does only not with the new monitor

  I have a HP pavilion p624of pc with original video express chip intel g45/g43. I buy a new widescreen Acer, S201HLbd I series have problems to display videos and video advertisements on my desk.

  Acer support said that the problem is with the drivers. I have check the HP website and don't see any update for drivers intel original; running the disk HP Manager, (3rd party provider, I guess), it tells me that my video drivers are outdated, and I need to get from the computer manufacturer. Where can I find an update of my current video drivers be able to watch videos on my desk. I connected the acer monitor to my laptop and it works fine. I started in safe mode and the video will work. It is not all the videos, but some that will be distorted, shine or have a black box in front of them. Need to find a new updated drivers, but where?

  Hello:

  Have you tried to change the screen resolution of different setttngs?  For example, if you went to a 4:3 to widescreen (16:9) display monitor you need to change the resolution to a wide screen resolution.

  Run the Intel driver update utility and it will scan your PC and give you downloads for all Intel devices that need updated drivers.

  http://www.Intel.com/p/en_US/support/detect?IID=dc_spotlight_dctop10

  Paul