USING OVERDRIVE AFTER FORMATTING

Similar Questions

• Partition on HARD drive disappeared after formatting using the product recovery disc

  My laptop came with a partitioned hard drive C and D drives.

  After formatting my hard drive using the recovery disk of the supplied product with my computer, I don't have any option to partition the HARD drive, only for the 1. 46 GB for some recommended backup, and the remainder became the C drive.
  D drive disappeared. Now, when I put the USB ant in my laptop, it reads as D drive.
  Can you please help, I need to have my hard drive partitioned into C and D drives, and flash memory can be any subsequent letter.

  Hello Richard

  Is it so complicated to tell us which model of laptop you have exactly?
  Anyway, when you use recovery Toshiba you cannot lose score. After using the recovery media, you'll have to factory settings and the structure of the HARD disk will be the same as on the first day.
  Something like that is definitely not possible.

  > I don't have no option to partition the HARD disk
  This option doesn't exist. On some older models of laptops, just an option to set up the first score ability there.
  After the first start, you can go to disk management and activate the second partition. All that s!

  Please tell me what model of laptop have you then I can tell you more about the partitions.

• Reduced after formatting ability

  One of my disks in HARD disk shows a reduced after formatting ability. Why would he do that?

  Binary (where a kilobyte is equal to 1024 bytes) and Decimal (where a kilobyte is equivalent to 1000) are the two different number systems which are used to express units of storage capacity. Industry standard is to display capacity in decimal places, but some programs to measure the ability of a disk in binary format. I hope that answers your question!

• HP Mini 110-3000: after formatting wifi network icon missing

  Dear Sir.

  I have HP Mini 110-3000. As there is problem in my original preloaded operating system so I formatted and installed windows 7 ultimate 64 bit operating system.

  After formatting, find it me impossible to see the wireless network icon in my tray instead it is another icon that is used to connect to the internet using a LAN cable.

  What is the problem?

  Hello:

  Go to Device Manager and look at the list of devices it.

  Is there a device listed in the Device Manager, labeled as a network controller?

  If so, this is the wireless card that need to install the driver.

  If you don't know which driver you need for the wireless card, please report it to the listed hardware ID of the device that you see as a network controller.

  To find the hardware ID, click the network controller device.

  Then click on the Details tab in the upper part of the window network controller.

  Now you will see a drop-down list of property, and it will be set to the Description of the unit.

  On this list and select the 2nd item (Hardware ID).

  After the first string of characters you see in the window.

• Satellite A200 - cannot use Vista after the recovery of the product

  Hello. I hope someone can help me with the following... This week I had various issues with which follows my laptop a Vista update that system restore did not fix, so I decided to go for a full recovery of product (which I have a complete backup of all my files).

  So far I have used the product recovery on my laptop in the 3 ways I can see (and more than once): without changing the settings, change the settings and maximize the partition, change settings and select advance / expertise.

  Whenever I was able to complete the initialization of windows, create a new user account, etc. Once the Office has been set up, I get a small window with a progress bar and when it's over, I click on the button 'restart '...

  After the reboot, I get the black screen that says Microsoft Corporation with the green progress bar, but he's there for what feels like 'too long '. After a while, I get a black screen with a cursor, then a blue screen for a crash dump.

  If I use F8 and boot mode safe, the system stops the CplIR.sys file, although the hard disk activity seems to be continuing. I turn off after 10 minutes.

  If I use F8 and then select Repair computer... This is what is happening with each option
  -Restore the full windows operating system: after clicking on OK nothing happens.
  -Diagnostics of memory: there is no problem with memory
  -DOS prompt: I run CHKDSK and there is no problem with the hard drive
  -Restart: there is no errors, even if the word diagnosis 'impossible' when he sees, there is no system restore points

  Then on reboot I get the black screen with cursor followed by the crashdump OR if I managed to log in and access my desktop, I get the crash dump, as soon as I try to do something (like open Control Panel).

  Following the instructions found elsewhere, I have tried this after removing the battery, then changing power management options immediately after the initialization of windows (ie. before clicking on the restart button). No change.

  I even ignored the button restart! But still get a crash dump, when I try to do something.

  Any ideas? I've got past (ie. wasted) so a lot of time on this and don't understand what may be wrong after formatting the windows drive image and reloading...

  Hello

  It's very interesting story. I got several notebooks several times but I never noticed anything like that.
  I must say that what you did right and you think appropriately. If I were you I would try exactly the same steps to make it work somehow.
  I do not know which issues you had before, but I imagine that here it's just the problems of software and not important for the operation of the equipment.

  It's really hard to say what can be the problem. What you can try, is somewhere to get facilities Microsoft Vista disk and install naked Vista to see if the same thing will happen again.
  Anyway, the fact is that images of recovery are tested and adapted for each laptop model and if the material is OK there no reason for this kind of behavior.

  Try again with the new installation using Microsoft facilities drive and let us know exactly what is happening.

• Recovery CD don't reinstall it Satellite M300 correctly after formatting HARD drive

  Hi all

  After having my original problem to create rescue disks resolved with your help (thanks again), I'm at the formatting of hard drives of 300. After that, I want to do a fresh install of Ubuntu.
  But I must admit I'm rather nervous about all this.

  So 2 questions:

  1 has anyone done this before and how it worked?
  2. I would be able to get the M300 back to the form using the reinstallation discs, AFTER formatting the HARD drive

  Thanks in advance!

  Hello

  Usually the Vista Toshiba Recovery DVD should reinstall everything again. Simply said, it must affect the M300 return to the factory settings.
  The use of the recovery DVDs is very simple.

  You must boot from the recovery DVD and must follow the instructions on the screen!
  But note; The recovery DVDs will format the entire HARD drive... as the partitions created, etc...

  That s it.

  Welcome them

• Waste product creates Backup Windows.old after format

  Hello
  I have Toshiba Satellite A200-1CR Windows Vista Basic
  I want to format the system with DVD product, is recovery product recovery backup Windows.old after format?

  Concerning

  Hello

  No, the Toshiba Recovery CD format the whole HARD drive and installs all new!

  Simply said; the use of the recovery CD redefines the laptop to factory settings.

  Best regards

• Gettinng less updates to Windows Update after formatting Windows

  Original title: problem with Windows Update after PC format

  Hello, I have Windows 7 x 64 OEM and today I had to format 6 times my PC because of my graphics card.

  Problem which is the 5th time that I formatted my PC, WU shows me less up to date than the first time. And in format 6, least of all day.

  How can I solve this problem? Thnaks.

  Hi Josele69,

  Whenever you install a new update, it contains the updates released before. If you will get only the recent updates. When you run windows update, you also receive only for new updates when you're done with the updates offered. This might be a reason you found less updates after formatting windows.

  For more information, see the links:

  Install Windows updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/install-Windows-updates

  Install Windows updates in Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/install-Windows-updates

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Calculation of frame rates of acquisition image using the 7 Format

  So I finally got my Basler firewire (IEE1394b) camera to capture images at his rate max (120 fps).

  But to do this, I need to use the '7' Format.... which is a bit confusing to me.  When I use the '7' Format, I can't specify the frame (frames per second) rate.  Apparently, you only specify the parameters (length, width, color / mono) of the image and the size of the packets and a few other things.

  So, how can I calculate speed?  I need to know exactly how much time elapses between each image.  And it must be constant.  I can't have a different frame rate.

  NEITHER told I can calculate the frame rate using this equation:

  

  That comes from this article.

  But I am skeptical because the article also says:

  Please note that the time to transfer an image is slightly faster than the time it takes to acquire an image.
  

  People out there can clarify this for me?  Is the frame rate constant?  And then I actually calculate when using size 7?

  The rate will be constant.  It won't change from image to image.  The difficult part is to find what it is.

  Basler camera manual will tell you how to calculate the frame rate.  There are three different calculations, and gives you the slower pace is one you use.  These calculations are accurate enough, I think.

  Another possibility is to measure the frame rate, but that requires several seconds (or minutes) for a measurement precise.  The simplest method is to start a life-long and save a frame in time at the beginning, wait several seconds (or minutes) and save the time of another framework.  Subtract the chassis numbers, subtract the time and divide to get the frame rate.  With a wait of several minutes, it's extremely accurate.  To get the acquisition time, read an image whose value "Next Image", then save the chassis number and read the msec timer immediately after reading.  Using a flat sequence structure is probably the best to ensure that everything happens in the desired order.  If you loop playback, you will see real cadence cadence converge slowly.  Stop it when it is pretty accurate.

  In a program I wrote, I controlled the pace by setting the shutter exposure time.  I used the derived formula of the Basler manual for cadence and reversed to calculate the shutter speed.  This only works if you have another way to adjust the brightness levels (opening, lighting, etc.).

  Bruce

• Try to run the update to Windows XP. Had a complete crash of the PC and XP complete recharge after format. Could not downlaod updates XP then reloaded without format. Still can not download updates.

  Sorry about the title full, never used this site before

  Complete computer "meltdown" MB had failed. put spare MB in and loaded win XP - PRO after format. Could not downlad win updates.  Depc 0x8024400A error.

  Reload XP - Pro without format hoping to fix the problem.  No luck.

  Need help badly.

  I use AVG2012 for safety

  I am able to download the programs from other sources.

  I can't download the "Fixit" program as it equires SP3 and I'm to SP2.

  I tried the manual method and Thatcher did not.  I'll try the "aggressive" mode tomorrow (7/5) and if that doesn't work I'll

  seriously considered returning on Win2K.

  and then again loaded WinXP SP2 and I can not even do Windows updates.

  First, install the drivers necessary for the computer after reinstalling XP SP2. Then install the SP3 package after you a stand-alone download of SP3 Installer from this link:

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=24

  Once SP3 is installed, try Windows Update. If it still does not work, or if the SP3 installation fails, you should get some messages or error codes. Post back with the error code.

• C 200 1 GB Sansa no storage, even after format; Unable to update software

  Hello

  before all sorry for my bad English.

  I have some problems with my sansa c 200 1 GB. Lately, the player had no storage, even if there is no songs on this subject. This problem persisted even after format. I went on the forum and that you try to upgrade the drive with new software (because I think it's a software problem). They wrote, there

  "Hold the record button until the"new hardware is ready to use"rises, and then press the record button."

  It does not, the player is connected to the computer (and does not display 'new hardware is ready for use'). I tried several times but it does not help (a few years ago, I needed a software update and it worked well (so I'm not stupid to push the right buttons); o)

  Thank you for your help,

  kulturkugel

  Since it is a C200 try to format using the MP3 itself. Go to settings and under settings, choose the format and we'll see what happens.

  Hope this helps.

• Installation of XP is no longer recognized by the Setup disk after Format of Partition

  Hey all,.

  In short, my problem is that I have an installation of XP (home or professional) intact windows, but after deleting another partition, the computer does not start to it. My question is what are all the things needed for a computer can be started on the windows partition - even just to the loading screen (which files are needed on the partition, for example boot.ini file, which must be in the MBR, how to mark a partition as bootable; etc.). Here is a description of exactly what has happened and what is the current situation:

  I was working on a friend's computer, and he asked me to delete the partition that it has not been used (D) and melt in his primary partition (C) where was the installation of Windows. I used a program called Easeus to format the partition for Windows let me to merge. The program asks for a restart, and then it is initialized to a screen where he deleted the partition, then restarted once again, probably to load Windows.

  That's where the trouble starts. Instead of windows, I have nothing else than a cursor flashing ("_") in the upper left of the screen. After 60 seconds, nothing was. I rebooted a couple of times, still no windows.

  The first thing I tried was to throw the disc to reinstall the window. I got to the screen configuration and supported on entry to choose a windows installation to repair, however he could not find one on the drive C (or D). I then tried to install Windows on drive D, hoping at least to be able to access the files on your computer with a parallel installation and then clean things later, but the installation struck a BSOD (sorry I don't have the message). The last thing I tried using the recovery console, but the only one installation of Windows that he found was on the D drive (I guess it was the remains of the failed installation that I had tried just because it contained only a few system files).

  So I still need an operating system to access the files on the C drive, so I did an installation of Fedora Linux (on a small new partition in drive D). I could check on the files and they were all intact, including the Windows system files. I could not find anything wrong with the partition, except for the apparent absence of a file boot.ini on drive C. I tried to add a boot.ini file by default (even though I wasn't sure exactly what should be in it). I can only assume that when my friend had the computer built with partition by a local technology company, they did the D drive partition bootable, but put the Windows files on the C drive. It makes no sense, but I can't find any other reason format another partition that windows would make it unbootable.

  The problem is, now, I have GRUB installed to Fedora. GRUB cannot boot directly on Windows, so he has to begin on an another bootloader that can. I think I have GRUB pointing to the right partition, but I get an error message. So, what I want to know from a point of view of Windows is everything necessary for a successful boot, assuming I can get GRUB to work on his end. What should a healthy Windows boot look - exactly, what should happen?

  The other option, of course, must do a fresh install of Windows on drive C (and hope for no BSOD more). I could put all the files on the partition of Fedora and move them back after the relocation. So what you think - is it worth a try even to save the current installation of Windows?

  Feel free to ask questions or for clarification. I have a limited capacity to test things, I have to wait until I can get to his computer. Your help is very appreciated!

  -Thomas

  Hey thanks for the reply guys. Just for the record, I posted that thread on WindowsForums, and I got good results. If anyone is looking for an answer, here's the link to the thread. Sorry, I should have scored as before, but thanks to you both for your help!

  http://windowsforums.org/topic/5097-XP-installation-no-longer-recognized-after-formatting-other-partition/page__pid__16201

  -Thomas

• Behavior of rocket after format change

  Hello

  When I got the Sansa Fuze it was recognized and mounted under Linux as "Sansa Fuze 2 GB.  However, after using the command format under control panel, it is now mounts as virtual disk.  Basically, the format has changed somewhat under Linux.  I am also a sur.22 version of firmware.  Banshee now will communicate with the appliance, although other programs can e.g. rhythmbox.  I just want to know what could have caused this, that is, the changes made when a format command is executed and the version.22 of software changes how the device communicates?

  Thank you

  Byte

  Although mlabel(1) reported that the device has a label.  I went ahead and replaced it with a new label.  It worked.  Now, build up the appliance with the volume as the name tag.

  Example:

  sudo mlabel(1)-i/dev/sdx: sansa fuze

• HP 15-d030nr: what updates what I need to do in order to use Adobe After Effects CS6?

  HP 15-d030nr, which updates what I need to do in order to use adobe after effects cs6?

  I installed Adobe After Effectss CS6 because the HP Support told me that he would continue to operate; This isn't.  It is very slow and locks up bad.  What updates what I do, or I'm looking to have to go buy another labtop?  Also, I can make these upgrades me - at what price?

  * HP 15-d030nr *.

  Material

  15-d030nr product name

  Product number F5X99UA

  Microprocessor 2.0 GHz processor Intel Pentium N3510

  Microprocessor Cache 2 MB L2 Cache

  4 GB memory (1 DIMM) SDRAM DDR3L

  User accessible memory Slots 2

  Intel HD graphics graphics video

  Display 15.6 inch diagonal BrightView HD screen tactile backlit by LED (1366 x 768)

  500 GB HDD at 5400 RPM hard drive

  Multimedia drive SuperMulti DVD burner

  Network 10/100BASE-T Ethernet LAN (RJ-45 connector) map

  1 x 1 wireless 802.11b/g/n WLAN connectivity

  HD audio, Audio with stereo speakers

  Keyboard full size Island-style keyboard with numeric keypad

  Pointing device Touchpad supporting gestures multitouch without power button

  Ports external multi format digital card reader for Secure Digital 1 maps

  SuperSpeed USB 3.0

  2 (USB) 2.0 universal serial bus

  1 HDMI

  1 VGA (15-pin)

  1 PORT RJ-45 (LAN)

  1 plug headphone-out/microphone-in combo size 1.11 in. (H) x 14.88 in (L) x 10,20 in. (D) weight 4.96 lb power 45W AC adapter

  3 cell 31WHr 2.8 polymer battery of lithium-ion ID Mech Description Front facing Webcam HP TrueVision integrated high definition with digital microphone

  * After Effects CC (2014) system requirements and Windows language versions *.

  Intel Core 2 Duo or AMD Phenom II processor with 64-bit support

  Microsoft Windows 7 with Service Pack 1, Windows 8 or 8.1 Windows

  4 GB of RAM (8 GB recommended)

  5 GB of available disk space; additional space required during installation (cannot install on removable flash storage devices)

  Additional disk space for the cache drive (10 GB recommended)

  display 1280 x 1080

  System 2.0 - taking supported OpenGL

  QuickTime 7.6.6 software required for QuickTime features

  Optional: Adobe-certifi ed GPU card acceleration graph plotted in 3D rendering engine Department

  Recording and Internet connection are necessary for activation of the software required, validation of subscriptions, online access to services *.

  * I also have a 1 TB external hard drive *.

  Your problem is that the program wants a good video card and a fast hard disk and a lot of memory and have in what precedes. If you have upgraded the RAM to 8 GB memory and installed a disc hard solid state, you could do the program usable but the real bottleneck is going to be the Intel HD graphics, which cannot be upgraded.

  You don't have a slot open for add a 4 GB memory module. It is a simple upgrade relatively inexpensive. See here:

  https://www.YouTube.com/watch?v=L7FvZ-JduRM

  http://www.crucial.com/USA/en/ct51264bf160b

  I'll try this one step at a time. Next would be the solid state drive. It would cost maybe $150. If you need assistance.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• fan does not 100% after formatting

  HP Pavilion dv6 7180se laptop

  Overheating after formatting

  I lost my recovery files and custom installed windows 7. I also lost all my drivers, but this isn't the problem. I find the drivers on the hp site and found and installed a few that I recognized. I have especially playing games on my laptop and realize that the fan runs not too fast that it was as well that the game lags a lot after 5 minutes of gameplay that didn't happen before you format it. Can I download all the drivers from: -.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&LC=en&product=5282836

  or

  Is there something else I should do?

  Thanks in advance

  You don't need 'all' of them, especially under the network section since HP posts drivers for the various models used in their laptop computers.

  You should not all under Chipset, storage, graphics and Audio. And a few others like Synaptics Touchpad, etc..