VMmark2 PowerCLI Service failed to start: Loadtime =

Similar Questions

• After a virus, I am unable to connect to the internet. Event log messages: the NetBios over TCP/IP service failed to start due to the following error...

  original title: NETBios TCPIP of missing in Device Manager

  I recently had to run two antivirus programs on an infected computer and am now unable to connect to the internet. When I went to the event viewer, I noticed the following error messages:

  Event type: error

  Event source: Service Control Manager

  Event category: no

  Event ID: 7000

  Date: 16/01/2012

  Time: 12:31:17

  User:                       N/A

  Computer: JARRIOUSSTUDIO

  Description:

  The NetBios over TCP/IP service failed to start due to the following error:

  The service cannot be started, either because it is disabled or because it has no enabled devices is associated to him.

  Event type: error

  Event source: Service Control Manager

  Event category: no

  Event ID: 7001

  Date: 16/01/2012

  Time: 12:31:17

  User:                       N/A

  Computer: JARRIOUSSTUDIO

  Description:

  The DHCP Client service depends on the NetBios over TCP/IP service which failed to start because of the following error:

  The service cannot be started, either because it is disabled or because it has no enabled devices is associated to him.

  Event type: error

  Event source: Service Control Manager

  Event category: no

  Event ID: 7001

  Date: 16/01/2012

  Time: 13:32:01

  User:                       N/A

  Computer: JARRIOUSSTUDIO

  Description:

  The DHCP Client service depends on the NetBios over TCP/IP service which failed to start because of the following error:

  A device attached to the system does not work.

  Event type: error

  Event source: Service Control Manager

  Event category: no

  Event ID: 7001

  Date: 16/01/2012

  Time: 13:32:01

  User:                       N/A

  Computer: JARRIOUSSTUDIO

  Description:

  The helpdesk TCP/IP NetBIOS depends on the NetBios over TCP/IP service which failed to start because of the following error:

  A device attached to the system does not work.

  When I look in the Drivers folder, I see netbt, but devices & Non Plug and Play Devices, of TCPIP NETBios is not listed in Manager.

  Hi Diddy Dell,

  Follow these methods.

  Method 1: Performs a search using the Microsoft safety scanner.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Method 2: Follow these steps:

  Step 1: Start the computer in safe mode with network and check if the problem persists.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Step 2: If the problem does not persist in SafeMode with network, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 3: Follow the steps in the article.

  How to reset the Protocol Internet (TCP/IP)

  http://support.Microsoft.com/kb/299357

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

• The NVIDIA NDIS IO Control Driver service failed to start

  NVIDIA NDIS IO Control Driver service failed to start due to the following error: the system cannot find the specified file.

  It's the correct driver.

  Ooohhh, you see in the event Log?

  I looked in the NVIDIA forums and found this:

  http://nvidia.custhelp.com/cgi-bin/nvidia.cfg/php/enduser/std_adp.php?p_faqid=262&p_created=1117061806&p_sid=qP2bKYVi&p_accessibility=0&p_redirect=&p_lva=&p_sp=cF9zcmNoPTEmcF9zb3J0X2J5PSZwX2dyaWRzb3J0PSZwX3Jvd19jbnQ9MiwyJnBfcHJvZHM9MCZwX2NhdHM9MCZwX3B2PSZwX2N2PSZwX3NlYXJjaF90eXBlPWFuc3dlcnMuc2VhcmNoX25sJnBfcGFnZT0xJnBfc2VhcmNoX3RleHQ9bmRpcw**&p_li=&p_topview=1

  I have some NVIDIA cards, but not this one, so I can't recreate and test the suggestion...

  If the RemoveNvNdis.exe does not work (I think he must disable or remove completely the service), looks like he's some NVIDIA service that tries to start when you reboot, it cannot be started for some reason any.  Looks like you don't need to start.

  If you can find it in the Services of XP, you could check the properties and set the startup type to disabled, restart and see what things look like.  (Do you know how?)

  If the mere presence of the Service in your list of Services, then you mind, you can also delete the Service entirely (I want to it later, just to be ordered if it is always hanging out).

• What is causing the error event ' BCM42RLY service failed to start due to the following error: the system cannot find the file specified "Event Id 7000

  What is causing the error event ' BCM42RLY service failed to start due to the following error: the system cannot find the file specified "Event Id 7000

  Hello

  1. Since when are you facing this problem?

  2. What is the number of brand and model of the computer?

  3. have you made changes on the computer recently?

  BCM42RLY is a Broadcom network card driver. I suggest that you uninstall and reinstall the drivers and check if it helps.
  Uninstall or reinstall a device: http://technet.microsoft.com/en-us/library/cc725782.aspx

  Hope the information is useful.

• I get an error saying "the BCM42RLY service failed to start due to the following error: the system cannot find the file specified. '.

  Log name: System
  Source: Service Control Manager
  Date: 17/07/2011-21:12:53
  Event ID: 7000
  Task category: no
  Level: error
  Keywords: Classic
  User: n/a
  Computer: ivan-PC
  Description:
  The BCM42RLY service failed to start due to the following error:
  The system cannot find the specified file.
  The event XML:
   
     
      7000
      0
      2
      0
      0
      0 x 80000000000000
     
      203523
     
     
      System
      Ivan-PC
     
   
   
      BCM42RLY
      %%d Ko
   
  original title: can someone please help...

  Hello

  1. you are using a Dell computer?
  2. What is the model number of your computer?
  3. don't you make changes to your computer before the problem?

  BCM42RLY is a broadcom driver. I suggest that you uninstall and reinstall the drivers.

  Uninstall or reinstall a device

• VCenter 6 Services fail to start on startup

  Physical server 2012R2 6 VCenter server stopped for hardware maintenance and booted up fine afterwards.

  During the shutdown, this event was logged in the application log:

  The description for event ID 1000 from source VMware VirtualCenter Server can not be found. Either the component that triggers this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.

  If the event is on another computer, the display information had to be saved with the event.

  The following information has been included in the event:

  Launch of VMware VirtualCenter shutdown

  the message resource is present, but the message is not in the string/message table

  After starting most of the Vcenter services had not begun, nor could they be started manually.  I it goes back to the first failure recorded in the system log:

  The VMware HTTP Reverse Proxy service stopped with the following special service error:

  Incorrect function.

  I can't start this service manually, it fails with the same error.  All other services fail with an error of dependence.

  This is very frustrating, because we have upgraded this server from Server 2008R2 for the same reason, the service would not start.  When there are Server 2008R2 his running 5.1, we tried the upgrade to 6 but it failed and we couldn't solve it, so we completely removed Vcenter and tried a new install, it didn't until I managed to 'wrong' Setup by changing the Manager of VMware vCenter workflow service to run as local system if not always failed.  We have therefore installed and running, then after the first reboot comes to fail start services!  So we fresh installed Windows 2012R2, installed VCenter without any AV or other "crust" to make sure it would work, which was the case.  Now this 'thing' just continues to fail like that once!

  DNS is fine functiong and the server has survived a number of reboots yesterday, no idea why it does not now!

  James

  Thanks to the Ram from VMware support we figured out that WWW Publishing service has been installed, the value manual start, but has been started.  The VMware Reverse HTTP Proxy service is listening on port 80, so that caused a conflict.

  This was due to an installation of Veeam One, which has been deleted, but left the installed IIS components.  Gahh!

  Required ports for vCenter Server 6.0

  How to change the TCP port for Internet Information services

  Ports: Veeam ONE Deployment Guide

  Article KB of Veeam do not notify IIS components.

  I do not think that this question concerns the problems we had on Server 2008R2, but given that this facility is gone, I can't confirm.

  Solved

  Thank you

• The MCSTRM service failed to start due to the following error: the system cannot find the specified file

  My computer starts rather suddenly gel with many applications.  Today it froze again once I finished a long email and was about to send.  I lost him of course.  My Event Viewer was the topic.  Event 7000, Service Control manager Eventlog.

  What can I do?  I have Vista SP2 64-bit.

  I'll add that the kernel_driver of Type 1 mcstrm following 1 State arrested Win32_exit_code 2 <0X2>Wait_hint Checkpoint 0 x 0 0 x 0

  Please... any help to fix... my computer keeps freezing. and I will need to get a new laptop or an Ipad, if the problem persists.

  Thank you

  Candy C:\Users\David> net helpmsg 2

  The system cannot find the specified file.

  Is that error on this post code, IE something deleted, probably your antivirus or you.

  For problems to explore, which has nothing to do with this post, try this (which covers almost any problem).

  Explorer

  Explorer (explorer.exe) is the program that is the start menu and taskbar, windows folder and the office (which is a folder window).

   

  To see if a fix is available

  In Control Panel (and select Classic discovered in the left pane) select reports on the problems and Solutions (problem of type in the START search box), go to historical problem, right-click of your error and choose check for the Solution.

  You can also right-click and choose Details for more information. Post these details here. The name of the Module fault is important information.

  If the problem affects Panel press the Windows key + R and type wercon (or type it at a command prompt).

   

  Close the browser and start a command prompt

  • Close Windows Explorer
  • Start - All Programs - Accessories - right on command prompt and choose run as administrator.
  • Click Start. Ctrl + Shift + Right-click on an empty spot (just above the power of buttons is one place) then Exit Explorer.
  • Press Ctrl + Alt + Delete then Task Manager.
  • Control all processes to explore are closed. On the process tab select explore and right-click and choose end process, repeat if more of an Explorer in the list.

  Then to restart the Explorer after trying all of the following

  • Press Ctrl + Alt + Delete and choose Task Manager
  • In the Task Manager, click the file menu and then click new task (run) and enter explorer

   

  If you cannot start the Explorer at all

  • Press Ctrl + Alt + Delete and choose Task Manager
  • Under the processes tab, click Show processes from all users to elevate to administrator
  • In the Task Manager, click the file menu and then click new task (run) and type cmd
  • Other things you can try typing
    

    Explorer
    Explorer c:\
    Explorer/e, c:\
    wercon
    control
    Iexplore
    Rstrui

  If you cannot start a folder window you can use the Browse button in the new task dialog. Don't forget that you must right click and choose Open rather than double-clicking.

   

  Reregister the shell registry entries

  It is important that each order is accepted. If the command fails it means the file is damaged and must be repaired.

  Close the Explorer like above and then type at the command prompt (or copy and paste by clicking in the command prompt window and choose Paste).

  regsvr32 /i shell32
  regsvr32 /i urlmon.dll
  regsvr32 RPCRT4.dll
  regsvr32 PROPSYS.dll
  regsvr32 MSCTF.dll
  regsvr32 cscui.dll
  regsvr32 rsaenh.dll
  regsvr32 timedate.cpl
  regsvr32 ATL DLL
  regsvr32 OLEACC.dll
  regsvr32 actxprxy.dll
  regsvr32 USERENV.dll
  regsvr32 msshsq.dll
  regsvr32 NaturalLanguage6.dll
  regsvr32 thumbcache.dll
  regsvr32 WINTRUST.dll
  regsvr32 MMDevAPI.DLL
  regsvr32 audioses.dll
  regsvr32 audioeng.dll
  regsvr32 ExplorerFrame.dll

  
  regsvr32 msi.dll
  regsvr32 FirewallAPI.dll
  regsvr32 netshell.dll
  regsvr32 pnidui.dll
  regsvr32 QUtil.dll
  regsvr32 c:\windows\system32\wpdshserviceobj.dll
  regsvr32 WINHTTP.dll
  regsvr32 C:\windows\system32\qagent.dll
  regsvr32 C:\windows\system32\portabledeviceapi.dll
  regsvr32 wbemprox.dll
  regsvr32 wbemsvc.dll
  regsvr32 fastprox.dll
  regsvr32 imapi2.dll
  regsvr32 wshext.dll
  regsvr32 gameux.dll
  regsvr32 msxml6.dll
  regsvr32 vbscript.dll
  regsvr32 jscript.dll
  regsvr32 wshext.dll
  regsvr32 wshom.ocx
  regsvr32 wshcon.dll
  regsvr32 scrrun.dll
   

  Delete the folder and the settings of the Menu

  This will remove the settings are saved for each file that you visit. Also the order of the start menu and pinned list settings.

  Close the Explorer like above and then type at the command prompt (or copy and paste by clicking in the command prompt window and choose Paste).

  Reg delete "HKCU\Software\Classes\Local Settings\Software\Microsoft\Windows\Shell" /f

  Reg delete "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Streams" /f

  Reg delete "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\StuckRects2" /f

  Reg delete "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\StartPage" /f

  Reg delete "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\MenuOrder" /f

  Delete the thumbnail and icon Caches

  Close the Explorer like above and then type at the command prompt (or copy and paste by clicking in the command prompt window and choose Paste).

  attrib - r s h '% userprofile%\AppData\Local\*.db '.

  attrib - r s h '% userprofile%\AppData\Local\Microsoft\Windows\Explorer\*.db '.

  del "% userprofile%\AppData\Local\*.db".

  del "% userprofile%\AppData\Local\Microsoft\Windows\Explorer\*.db".

  Disable thumbnails and previews

  Damaged documents and particularly corrupt pictures or videos, can cause Explorer crash all trying to generate a thumbnail or an overview. This miniature and previews active option off.

  If you can start the Explorer, previews is Union on the command - folder and Search Options - framework of tasks use classic Windows foldersbar.

  Thumbnails are organized on the command bar - folder and Search Options - view tab - and check under Advanced settings - always show icons, never thumbnails and uncheck Show icon file in the pictures.

  If you cannot start the Explorer close Explorer as above and then type at the command prompt (or copy and paste by clicking in the command prompt window and choose Paste).

  Tracking Add "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced" v "IconsOnly" /t Reg_DWord /d 00000001 f

  Tracking Add "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced" v "ShowPreviewHandlers" /t Reg_DWord /d 00000000 f

  Tracking Add "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced" v "ShowTypeOverlay" /t Reg_DWord /d 00000000 f

  Turn around after testing the Explorer.

  Tracking Add "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced" v "IconsOnly" /t Reg_DWord /d 00000000 f

  Tracking Add "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced" v "ShowPreviewHandlers" /t Reg_DWord /d 00000001 f

  Tracking Add "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced" v "ShowTypeOverlay" /t Reg_DWord /d 00000001 f

   

  A boot is a way to explore

  It can be caused by a shell extension.

  Explorer (explorer.exe) is the program that is the start menu and taskbar, windows folder and the office (which is a folder window).

  The Explorer is built on addin programs called Extensions of Shell. The standard is provided by Microsoft, but programs add their own.

  • Download Autoruns http://technet.microsoft.com/en-us/sysinternals/bb963902.aspx
  • Close Windows Explorer
  • Start Autoruns by right-clicking and choose run as administrator
  • Click on the menu Options - Filter Options and check hide Microsoft entries and disable include empty locations
  • Go to the Explorer tab and uncheck everything to the left.
  • Click Start. Ctrl + Shift + Right-click on an empty spot (just above the power of buttons is one place) then Exit Explorer.
  • Press Ctrl + Alt + Delete and choose Task Manager.  Control all processes to explore are closed. On the process tab select explore and right-click and choose end process, repeat if more of an Explorer in the list.
  • Click the file menu and then click new task (run) and enter explorer

  If this can help, reactivate ½ at a time to identify those who. If this does not help, restart AutoRuns and go to the all tab and uncheck everything that it and restart. If this can help, reactivate ½ at a time to identify those who.

  Run Microsoft Fixit

  Microsoft has a range of automatic programs to solve common problems. To see problems explore

  http://support.Microsoft.com/mats/windows_file_and_folder_diag/en-us

  For the visit of the list the most comprehensive

  http://support.Microsoft.com/FixIt/en-us

  When you choose to download, choose the option to run on another computer. You can then save it to your hard drive. Open the folder, open the folder fix this laptop and run Run Fix It. It will contain all 27 FixIt.

  Recycle Bin
   
  If the problem is the trash bin remove the storage folders. It will be automatically re-created next time you delete a file or open the Recycle Bin. It will remove the trash and the files it contains for all users.
   
  Close the Explorer like above and then type at the command prompt (or copy and paste by clicking in the command prompt window and choose Paste).
   

  RD C:\$RECYCLE. BIN/s/q

   
  then repeat for each drive to change the drive letter, for example
   

  d:\$recycle Rd. BIN/s/q

   

  e:\$recycle Rd. BIN/s/q

   
   
  If the Office does not start
   
  This will create a new empty by user and common desktop computer. This will allow to test if a file on your desktop to start the Explorer.
   
  Close the Explorer like above and then type at the command prompt (or copy and paste by clicking in the command prompt window and choose Paste).
   

  MD "% userprofile%\DesktopTest".

   

  Add reg "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders" / v/t desktop REG_EXPAND_SZ /d "% USERPROFILE%\DesktopTest" /f

   

  MD "% public%\desktopTest".

   

  Tracking Add "HKLM\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders" v "Common Desktop" REG_EXPAND_SZ /d "% Public%\DesktopTest" t f

   
  To restore default after having tested if begins to explore.
   

  Set ExpFix1 = % user

   

  Set ExpFix2 = % profile

   

  reg add "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders" / v/t desktop REG_EXPAND_SZ /d "% ". ' ExpFix1 ExpFix2%% \Desktop "/f

   

  Set ExpFix1 = % Pub

   

  Set ExpFix2 = % lic

   
  reg add "HKLM\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders" /v "Common Desktop" /t REG_EXPAND_SZ /d "% ". ' ExpFix1 ExpFix2%% \Desktop "/f
   
  You will need to disconnect then.
   
   

  New entry missing folder

   

  If the above does not help.

   

  Download NewFolder.reg from https://skydrive.live.com/redir?resid=E2F0CE17A268A4FA 121.

   

  Click Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type Regedit menu and file - import , import the NewFolder.reg.
    

• Dependency or service failed to start. / Loss permission on the Admin account

  I recently started getting this message every time I try to run programs or services. I can't run anything with admin privelages, nor that I can UN - do the last change I made, which was to allow the activity of user controls.

  What I can do: connect to the Internet. Play games or run programs that do not have the windows icon of security around them.

  I can not do: run a program as administrator. Update Windows Defender. Start programs that have to do with my antivirus. Change or open security or system settings.

  Any ideas on what went wrong past and how to solve this would be wonderful.

  I just finished check that something based on the installation of another program. In doing so, I noticed that my system, administrator and user permissions have been limited, and a TrustedInstaller got all permissions. All I am allowed to do is read run, or read. How can I get my return authorizations?

  Hi Balduron04,

  You did it changes on your computer before the problem?

  I suggest you start in safe mode and do a System Restore in safe mode until your computer was working normally and check if the problem persists.

  Azeez Nadeem - Microsoft Support [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Oracle Java host service fails to start

  I'm trying to start the Oracle Java host service but its failure to start giving the error
  *' Some Services stop automatically if they have no work to do, for example. performance services and alert *.
  
  This is an obstacle I in the starting of the OC4J service and, therefore, the presentation Service
  
  Are there specific changes, maybe I need to do in the environment variables... ? Currently, I have JDK1.5 installed in my system
  
  Appreciate any quick entries on this...
  
  Thank you!

  Why not post the details here to help those who may come after you for the same problem?
  And if you find useful messages please mark as such :-)

• Event Viewer: Windows color system service failed to start due to the following error: the service did not demand launch or control in a timely.

  Whenever I start my Windows 7/64 on a motherboard Asus X 99 installation - WS pairs of the following event log entry are added in the journal of the repetitive events (12 times on every boot):

  ----------------------------

  -

  -

  7009

  0

  2

  0

  0

  0 x 8080000000000000

  38039

  System

  *******

  -

  30000

  Windows color system

  ----------------------------

  -

  -

  7000

  0

  2

  0

  0

  0 x 8080000000000000

  38040

  System

  *******

  -

  Windows color system

  % 1053

  ----------------------------

  What may be the cause of these event log entries?

  Hello

  Please keep us updated on the issue.

  To better understand Windows Color System, I'll refer to the article below.

  Windows color system

  I hope the information is useful. Feel free to write us if you have questions related to Windows, we will be happy to answer.

• All Windows troubleshooting services fail to start.

  

  That's what I see every time I try to solve anything on my computer. I did a little research and discovered that it could be where I tell the system to put its temporary files. The system works on an SSD. To try to reduce write operations frequent drive to extend his life, I configured the system to store the temporary files on a USB attached permanently. Thinking that this may help, I put directories separated on the root of the drive flash of TEMP and TMP and configured the system to write temporary files to them accordingly. I even copied read/write permissions to match exactly those permissions to the TEMP folder in the Windows directory in every detail. I configured the TMP to write to the TEMP on the flash drive to see if it makes a good. Will post the results.

  Change on the configuration of TEMP folders: configuration of the system to write TMP file to the TEMP folder external as internal temperature, setting up records is not good. I even restarted the system. Nothing different happened. I don't want to have to reconfigure the system to write its temporary files on the system drive. Let me reiterate: the system works on an SSD and I try to keep to a minimum write operations.

  Just figured it out. I used a virtual disk to store the temporary files on in a concerted effort to minimize operations of read/write on the SSD, the system works on. It turns out that the use of the RAM disk is causing retailers to not start. So I put the respective environment variables to the temporary directory by default.

• I get this error message: Service Control Manager: The Genesys Logic USB Scanner controller NT 5.0 service failed to start due to the following error: the system cannot find the specified file.

  I get this error message (consistantly about every hour or so) and the computer crashes.  I suspect that it is looking for a file, but I can't find where the USP Scanner controller NT 5.0 would be installed.  Could it be part of the HP 6500 has Officet more pilots?  Thanks for any help!

  Hello John Wirkkala,.

  How long have you had this problem?  You still have the disk that came with your HP Officejet?  If this isn't the case, I've included the link below for the drivers and installation.  You have any other devices synchronize you with your computer via USB?

  If either reinstalling the device or updating the drivers is not a workaround, see the event viewer for the error log.  Please let us know status.

  Downloads of software & driver - HP Officejet 6500 a Plus

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=228&LC=en&cc=us&DLC=en&sw_lang=&product=4083977#N295

  Event Viewer: how view and manage events records same observer in Windows XP
  http://support.Microsoft.com/kb/308427

• HPWSProAdapter service does not start

  After last MS Security patches application (February, 2013) on a Server Windows 2008 R2 HOSTS, HPWSProAdapter service could not start.

  "The HPWSProAdapter service failed to start due to the following error:

  Service has failed to demand launch or timely control.

  "A timeout was reached (30000 milliseconds) waiting for the HPWSProAdapter service to connect."

  This error is leaving me with some latest status "Device communications error" HP printers because they depend on this service to HPWSProAdapter.

  Any idea?

  Open the registry, go to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\HPWSProAdapter

  Change multiple channels environment

  Insert COR_PROFILER = {03191964-0505-1966-BD0E-E92B0C04964F}

  so it will look like this;

  COR_ENABLE_PROFILING = 1
  COR_PROFILER = {03191964-0505-1966-BD0E-E92B0C04964F}
  SystemRoot = C:\Windows

• PDIHWCTL service could not start

  Whenever I boot my Dell M6400 laptop I get the error below in the system event viewer.

  I am running Vista x 64 professional

  It also happens on a different desktop computer Dell 690 running Vista X 64 final.

  I asked Dell technical support but they don't know.

  My computer seems to be working fine, but I would like to understand the implications of this error and corrected if necessary:

  Log name: System
  Source: Service Control Manager
  Date: 2009-03-21 11:00:17
  Event ID: 7000
  Task category: no
  Level: error
  Keywords: Classic
  User: n/a
  Computer: LAPTOPD
  Description:
  The PDIHWCTL service failed to start due to the following error:
  The system cannot find the specified file.
  The event XML:
  http://schemas.Microsoft.com/win/2004/08/events/event">
   
     
      7000
      0
      2
      0
      0
      0 x 80000000000000
     
      40047
     
     
      System
      LAPTOPD
     
   
   
      PDIHWCTL
      %%d Ko
   
  

  The event long online help directs me to

  http://TechNet.Microsoft.com/en-us/library/cc756344.aspx

  but he does not bring a more light, the error is due to the missing PDIHWCTL file.

  I Googled it, not much info.

  Thank you

  Antonio

  Thanks for the update thread. I don't think that you need to reinstall the operating system; just some programs you installed later and test after each uninstall. MS - MVP - Elephant Boy computers - don't panic!

• Error 1079 / base OS Windows 8 / Bluetooth service does not start

  Error 1079 / base OS Windows 8 / Bluetooth service does not start - I tried service.msc-> selecting Bluetooth support Service-> properties-> log on-> This account-(Administrator) / (NT AUTHORITY\LocalService) / / but nothing works, I had searched a lot on this problem but there is no solution to the problem of basic windows 8 (built in) only for win 7 and windows server... .but not for the basic version of windows 8 that I have...

  Now when I click to start the Bluetooth support service it always says error 1079...

  Hello

  Please, try the steps here to solve this problem:

  http://www.kapilarya.com/services-failed-to-start-in-Windows-8-1

  Hotfix applies to Windows 8 too and you must only put NT AUTHORITY\LocalService on the properties of the service.

  Hope this helps, good luck :)