Windows Firewall is disabled after waking from sleep.
I have Microsoft Security Essentials installed on my laptop running Vista, and whenever I put the pc in 'sleep' disables the firewall when he wakes up. How can I fix?
2. do you have a popup on the system tray that says that the windows firewall is disabled?
3 How long have you been faced with this problem?
4 you using windows live Onecare earlier?
Try to perform the clean boot your computer.
2. type msconfig and press ENTER.
4. When prompted, click on restart.
Umesh P - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
[If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]
Tags: Windows
Similar Questions
-
Wi - Fi disabled after waking from sleep - G9-591-70VM
A few days after the awakening of the laptop from sleep, the WiFi has been disabled.
Only the ethernet with a red 'X' icon was present.
Troubleshooting and looking in the network settings of the Control Panel, it was as if a Wi - Fi connection did not even exist on the laptop.
Restarting the computer does not resolve it. Stop and start the dos system did.
It happened again just now. All this experience? Thank you
Hi Kenshin
What network killer driver do you use so that what happened?
If you use a driver updated the Acer (pre-installed with the machine) I recommend that you download the new driver directly from the site of the network Killer (here)
1. uninstall the driver of killer
2. restart the system
3. install the new downloaded driver
4 restart once again
After that I did anything ever happen related to the network for me yet once (for example, BSOD, lack of WIFI, etc.).
-
Satellite A660-18 - powers off after waking from sleep mode
My powers of Satellite A660-18 wide for 2-3 seconds after waking from sleep. I upgraded the memory from 4 GB to 8 GB, using the site of Crucial, so I know it is compatible. BIOS is updated to 2.00.
Don't know what to do, how can I fix without turning off completely from mode "sleep"?
Hey Buddy,
> I upgraded the memory from 4 GB to 8 GB
And have you had the problem before you upgrade memory too or as memory upgrade? -
Satellite P300 - white screen after waking from sleep state
I'm having this problem:
The LCD screen may be empty when the computer is "awakened" from the sleep state. Nothing is visible on the internal LCD or an external monitor.There seems to be a solution:
An update of the firmware for a component in the main circuit of the computer solves this problem. This update must be performed by an authorized Toshiba (ASP) Service provider. Until arrangements are made for the update, restart the computer by pressing the power on button for a few seconds.described here: [white screen after awakening from fallback status | http://www.csd.toshiba.com/cgi-bin/tais/su/su_sc_dtlView.jsp?soid=1642844&moid=1209152]
-----
I also found this, but it didn't really help me much further.
[Satellite P200D and WinXP: no display after waking from sleep mode | http://forums.computers.toshiba-europe.com/forums/click.jspa?searchID=880412&messageID=118143]
-----
In fact, I think I'm able to solve myself, and I don't like not my laptop to be gone for two weeks or more. I just need some advice on where to find a correct upgrade. Is - this driver BIOS or graphics? Which version should download, where... etcetera. More tips on how to solve the problem are also welcome.-----
Edit: link and no need for words of line. : s
Edit2: grammar correction.Hello
> An update of firmware for a component in the main circuit of the computer solves this problem. This update must be performed by an authorized Toshiba (ASP) Service provider. Until arrangements are made for the update, restart the computer by pressing the power on button for a few seconds.
If you check the Toshiba document you would see that your Satellite P300 is not related to this issue.In your case I would recommend upgrading the BIOS and graphics driver.
In addition to keep your operating system up-to-date.I had this problem under Win XP and a MS patch and an update of the graphics card driver helped solve this problem.
-
Satellite T110 - Defective Bluetooth after waking from sleep
SATELLITE T110 Bluetooth will fail after awakening from sleep.
The icon will be flick between white and green as he seeks my device (phone).I ve reduced the problem to the laptop, because if I try to pair again phone to the laptop it fails. It's almost like he has a block?
Operate as planned, then I have to charge fully.
Bluetooth connects then as planned.It only became a problem because I installed the latest BIOS v 2.40
I use the 64-bit Version.When the problem occurs I run the Bluetooth Diagnostics and it comes back as fine no error reported. It s a pain now because I use the laptop mode "sleep" more off.
This is due to the new update of the bios.
Can you after waking from sleep just restart BT stack and try to connect to the mobile phone?
You mean that with the old version of the BIOS, everything was OK?Last question: what was the reason for the update of the BIOS? I hope not the fact you want to have the latest version.
-
Photoshop CC 2014 quits unexpectedly after waking from sleep on Mac OS x. How can I stop this?
suturenet wrote:
It's a stupid system, it won't let me post more of the report.
Yes, the forum software is stupid, but you are insulting the wrong people.
BOILERPLATE TEXT from the FAQ:
https://forums.Adobe.com/thread/375816?TSTART=0
Do not be abusive or aggressive in your tone
A post of sounding aggressive, demanding, accusatory or abusive will often evoke a response aggressive or abusive and unnecessary.
Remember, you do not discuss Adobe here in the user forums. You ask the help of users of volunteers like you who give their time for free. Nobody has any obligation to answer your questions.
-
Windows 8 I lose the internet connection after waking from sleep mode
My wife has a new laptop from Toshiba with Windows 8. When he wakes from sleep mode, it detects all wireless signals. If it restarts the computer, it detects our own wireless, as well as all the neighbors signal. Is there a simple way to correct this trend? She dislikes having to reboot the computer whenever she wants to use it.
Very interesting what's happening on a new machine. Are you sure the original wireless network card driver has not been updated (i.e. through Windows Update or its equivalent at Toshiba?)
I guess that the wireless network card driver doesn't handle well "message sent" by the system when it changes the power state change leading to a 'dormant' device (in this case the WiFi network) on the revival of the fashion Watch (same problem with the Hibernate?).
Not knowing your model Toshiba, or wireless network card let me suggest you try the following if options exist for 1 # *:
- Go to the section of the network adapters and Device Manager. Right-click your wireless card, and select Properties. Go to the power management tab, uncheck allow the computer to turn off this device and check allow this device to wake the computer , and then save your changes
- Go to the control panel and Power Options to change the parameters of the plan (for the selected power Plan), and then select change advanced power settings / wireless adapter / power save Mode / connected and select value is A maximum Performance otherwise affect this value
* Not sure about my translation of terms/options used above - I am not in an American version
If the above does not help I'd you make investigations with Toshiba on this issue as the owner of a new machine, you're probably eligible for a level of support.
+ Feel free to bring your network card and Toshiba models - this helps in search of possible measures and troubleshooting. And it could help other people if solve you the problem sooner or later...
Hope this helps
See you soon
LZ.
-
Bluetooth is not ready after waking from sleep on Windows 7
After updating my Tecra M10 Windows Vista x 64 Enterprise to Windows 7 x 64 enterprise, sometimes, when I wake up the laptop from sleep, Bluetooth is not ready.
Hibernation does not solve the problem, he needs a reset which is a problem for me because I usually have a lot of open applications.
In this case, the only Bluetooth devices in Device Manager are:* Bluetooth RFCOMM
* Bluetooth USB Controller-5 at TOSHIBAWhen everything works well, the Bluetooth devices in Device Manager are:
* Bluetooth RFBUS
* Bluetooth RFCOMM
* Bluetooth RFHID
* Bluetooth USB Controller-5 at TOSHIBAHow can I restart Bluetooth without having to restart the entire system? Turn wireless on and off the silder side does not work.
Thank you
Paulo MorgadoThanks for sharing!
-
Windows 8 - start screen tiles are black after waking from sleep
Recently installed Windows 8 Pro x 64. Whenever I have wake my computer from sleep and go to the home screen all the tiles are black, and the upper right corner where it shows my login and my avatar is missing. The rest start screen works as expected, and hovering just mouse over the tiles (or allowing the more alive to receive an update) will have show correctly.
I was running the pre-release of windows 8 without this problem.
My pc is completely up to date with drivers.
Data sheet:
I7 920
Gigabyte ex-58-extreme (bios f12)
2 x nvidia geforce gtx 580 in sli (310.97 driver whql)
Samsung 840 pro 256 GB ssd (windows disk)
2 x wd caviar black 2 TB
Creative xfi titanium hd (newest driver 3_00_2004)
Between the previews and update windows 8 retail I made a few changes, the only hardware change is the addition of the samsung SSD (previously on a wd raptor drive). The pilot 310.97 nvidia is also new, I was using an older version before.
I couldn't find anyone else with this issue a web search or a search here.
Anyone able to shed some light on this?
Screenshot: https://skydrive.live.com/redir?resid=DB7140570445443B! 107
I solved this problem by updating the video card drivers. I lived this question about the version of the nvidia geforce 310.97 driver, but upgrading to 313.96 has solved the problem.
-
Satellite L40-139: new graphics driver is causing the problem after waking from sleep
I have a three month old Toshiba Satellite L40-139 (PSL40E) with 1 GB of RAM with Microsoft Windows Vista Home Premium pre-installed. This laptop worked very well for me for the basic headquarters far tasks, and I would have no problem recommending.
In the last days I've updated the software and drivers from the Microsoft Update web site.
Since the update driver Mobile Intel(r) 945 Express Chipset Family (to version 7.14.10.1350, dated October 18, 2007), the screen resolution at 800 x 600 after awakening from the sleep state. The only way I found to fix it is to restart the PC.
Other articles published on the web, I understand that this particular driver (Mobile Intel(r) 945 Express Chipset Family driver 7.14.10.1350 version) has caused many other problems on a variety of hardware and software platforms.
Does anyone have a definitive solution for Satellite L40?
I looked at four options.
1. let the new installed driver and restart Windows each time after waking up from sleep mode. Rather, I must not do this.
2. using the Restore Point created by Windows Update before the update of the driver, roll back to an earlier time. This seems to be a good course if it works.
3 download an older version of the driver and reinstall it. I don't know which version would work but note that others have had success with the 7.14.10.1280 version. I guess a similar version could be included in the driver Package that can be downloaded from Toshiba Europe site, but have heard that the time required to download this software can exceed ten hours and am therefore reluctant to try.
4. the fourth option is not really possible. I should be able to "Roll-Back" the driver in Device Manager, but the button is disabled.
Although only a minor problem, it is very irritating and I would like to address them without causing other problems. Does anyone else have this problem? Someone has fixed it successfully?
Hello Peter
If I understand correctly, you use your usual laptop for daily work and you don't need any computer high-performance notebook. If I'm right I have to say that you should be happy if the laptop works well and stable.
I don't really see any reason why you wanted to update chipset driver. In any case, you should try to roll back the BONES of time earlier and I hope everything will work again. There is absolutely no risk, and you can test it.
Please post the result.
-
My PC loses connection local and Internet after waking from sleep/hybernation.
My PC loses connection local and Internet after wakes up from sleep/hybernation. The problem is solved by resetting the network card, but it is frustrating to have repeated resets every time the system in place to wake up. I am looking for a patch, I searched all the support sites and forums where there are similar problems that have been offered to different patches over time, but each of them has failed.
Vista 64 SP2
Hello
Check the updated drivers for the NETWORK card and WiFi.
Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlDownload - SAVE - go where you put it - right click – RUN AS ADMIN.
You can download several at once however restart after the installation of each of them.
After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
manufacturer of system become your backup policies).Repeat above for network card (NIC) and is a good time to get the other updated drivers Vista
love the updated drivers.I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
are almost always old, and you can search drivers manually as needed.How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspxAlso, check the power supply for the device management settings in device - double click Manager
the device and the power management tab.==============================================
More if necessary:
Check your settings (BIOS/CMOS) - usually F2 as you start - Wake on Lan, Wake on Modem and so on.
Troubleshooting Windows Vista sleep and extended
http://www.computerperformance.co.UK/Vista/vista_hibernate.htmHow to troubleshoot performance problems with sleep, hibernation and resume in Windows Vista
http://support.Microsoft.com/kb/950686May need to reset all to default power settings and then place back as you prefer.
How to solve a problem of Mode for Vista and find a Solution
http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.htmlHow to enable and disable Hibernation - you can try to disable and re-enable the it. http://www.Vistax64.com/tutorials/165508-hibernation-enable-disable.html
How to restore the default power in Vista (and then go back and change as you wish)
http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.htmlPanel configuration-Device Manager - look at the settings for the network card, WiFi, Modem power management.
and other devices. (Double click on the device and the power management tab)May need to reset all to default power settings and then place back as you prefer.
I hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
Does anyone else have problems with windows being placed off screen when waking up their MacBook Pro from sleep mode or when using an external monitor?
I have a 15 "rMBP and regularly connect with lid closed to a Dell screen 4K P2715Q. Whenever I wake up from sleep, many of my windows are off-center and move the windows from the edge of the rightmost to the Center.
I can't say with certainty if it is specific to the application or for all windows, but Mail.app and Messages certainly do.
I will do some tests later and post updates. Thank you!
Hello
I take this in system preferences > displays the mirror effect is on?
What resolutions are two screens to?
How to wake up the laptop from sleep?
If it is by lifting the lid is on the Mac you see it?
If it's the position carries no report available to the larger screen? (i.e. If the laptop could match the larger screen resolution would be the 'shift' appear in the same place, as the laptop was a cut from the larger screen).
In system preferences > displays which is the screen to 'drive '?
21:17 Wednesday. May 4, 2016
iMac 2.5 Ghz i5 2011 (El Capitan)
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro (Snow Leopard 10.6.8) 2 GB
Mac OS X (10.6.8).
iPhone and iPad (2) -
Desktop computer does not display the computers on the network after waking from sleep.
Both computers work on Vista Home Basic. Problem started after computers, the router and a DSL modem has been turned off and unplugged. After the awakening of the day before, the Office would display only the router and the laptop, but the way that he could not establish. Initially, a reboot of the desktop computer has solved the problem.
Reset and re-installed the router. The three elements of the network were visible after the start, but IE 8 soon at the opening of the homepage. Again, after "standby" mode, only the router and the laptop displayed.
After additional restart, only the router is displayed. The laptop shows all three elements and accessing office files.
Suggestions?
MikeHi Syed,
I did a full reset/reinstall the router, carefully following the manufacturer's instructions. Both computers are displayed in each of their respective lists of network, even after waking up from sleep mode.
This issue is resolved.
Thank you
Mike
-
T400 not re after waking from sleep - w7
I have a t400 with integrated f5307g wan device, which works very well, but after I wake the laptop from sleep, the wan card disappears in the menu fn + f5 and can not be turned on. I have to restart to reappear.
IM using windows 7 with the latest drivers (according to the lenovo system update). does anyone else know this?
has not tested linux? If so, reset BIOS default values and should be solved.
-
Safari crashes after waking from sleep mode mac mini
And to make things more awkward, it seems to freeze with youtube and google. He has not done this since the beginning. Lately, he's starting to do this. It is so boring. All other sites work except these two, or at least those's ones I learned to freeze. Open a new Help window sometimes. But earlier, I had to start the mac everything again to access youtube. So what to do? After the mode 'sleep', I can't seem to google, but I can get to atavist for example. YouTube is the only place that I can't replace and for real - it's so idiots clitch he needs an explanation.
Try the suggestions in this article http://osxdaily.com/2015/01/18/troubleshoot-safari-freezes-crashes-mac-os-x/
Maybe you are looking for
-
Firefox don't forget restarting in v. 23, passwords
I recently allowed my computer XP SP3 upgrade to v23 v16 (latest version Beta that Firefox requires you to have). Now, all passwords are stored despite what I put to them. In all previous versions, if I did not choose to save the password, then Firef
-
Tecra R840 - energy SSD after closing
Hello Could someone tell me what than a ssd power consumption when the computer is turned off? I have a laptop Toshiba Tecra R840-16J (bougth 6 months ago) with a sweet Plextor M5Pro 512 GB ssd intalled. Yestarday, after a charge of 100%, I liquidate
-
Group residential access from other computers is read-only.
Two machines, home network, both running Win7 Pro 64. Both machines have multiple accounts. On the machine at the bottom are the accounts under the name of Tom, Dick and Harry. (Not really, but they are good examples, yes?) On the machine of the f
-
original title: RunDLL I get the window followed whenever I click on an image or a file: There was a problem starting c:\Users\Jim\AppData\Local\Temp\seitybu\sxxqrbw\wow.dll that the specific module could not be found Can anyone advise on how to fix?
-
Can someone explain this, I have a router 3725 (IOS12.3), acting as a VPN server with remote users running VPN Client 4.0 linking in no problem (all have their PCs connected directly to their DSL modems and have transparent tunneling enabled in VPN 4