Wireless 3000 v2.0 keyboard sleep and don't wake up

Similar Questions

• computer goes to sleep as soon as the ethernet cable is plugged in and don't wake up

  When the ethernet cable is plugged into my pc, it immediately goes to sleep and don't wake up without a difficult start. As long as the cable is connected, the computer will not load windows, immediately go to sleep before my desktop appears. My laptop is connected wirelessly without any problems at all and when connected with a cable, no problem either. ISP says it's a pc no matter not a modem problem, there is a conflict, but they don't know where.

  I am running windows Vista Home Basic, a cisco modem, do not know what model.

  Any help would be appreciated.

  Hello

  1. don't you make changes to the computer until the problem occurred?

  I suggest you to check the parameters of the power management of the device on the network adapter.

  To correct the settings please follow these steps.

  (a) click Start, type device in the box start the search and then click on Device Manager in the programs list.

  (b) in the user account control dialog box, click continue.

  (c) in Device Manager, expand network adapters.

  (d) right click on the network driver and then click Properties.

  (e) click the power management tab.

  (f) click to uncheck the checkbox allow the computer to turn off this device to save power , and then click OK. If the option is checked, then uncheck the option and apply the settings.

  Once you have performed the steps, restart the computer so that the changes take effect, and then check the result.

  Hope this information is useful.

• Computer goes to sleep and won't wake up

  A few days ago my computer started not to wake sleep cycle.  It goes into hibernation and don't wake up with a jerk of the mouse or by pressing the buttons on the keyboard.  I put the display to sleep for 4 hours and 30 minutes, but she falls asleep before 4 hours are rising and then don't wake up upward.  I have to press the button for a few seconds to do to turn off and then restart.  If I press a button on the screen when the computer is in standby it gives me a message that the signal of the computer has been lost.  Anyone has any ideas how to solve this problem?

  Hello

  Look at all the features associated with sleep and ensure that it is only sleeping and not hibernate.

  Some computers sleep mode will not let you wake up mouse etc. You have to push short s to the power Witch (as mentioned above by WillTel).

  It is possible that your computer never before slept and was just to go off the screen.

  Jack - Microsoft MVP, Windows networking. WWW.EZLAN.NET

• Windows 7 computer freezes seems to go to sleep and won't wake up

  I have to restart my computer from the Tower after the computer is not used for about 30... looks like going to sleep and won't wake up... any ideas jim thxs

  Hi Jim,.
  Follow the steps described in this guide: http://www.selectrealsecurity.com/slow-computer/
  It provides simple instructions on how to speed up a slow computer. If you have any questions, just ask. I hope this helps you.
  Brian

• HP OfficeJet 3830: 3830 HP wireless printer is offline in "sleep mode" and don't wake up to print

  I've just set up a HP OfficeJet 3830 as a printer connected to my network wireless domestic (Airport Extreme Base Station router 802.11ac wireless). I was able to print-out of my MacBook, but when the printer goes into sleep mode, it appears offline and unresponsive to print. I have to restart the printer for her to appear online and respond. The printer will be in the basement, so it would be very inconvenient down to reboot just to print it. Kind of defeated the purpose of a wireless printer. I tried to disable the sleep mode to see if it works, but sleep mode settings cannot be disabled in the printer preferences. I already spent 3 hours to solve this problem.

  I contacted HP technical support to solve the problem. The person told me restore default settings and then unplug the power to the printer and the router wireless for 30 seconds. After restarting the router, then the printer, we have connected the printer to the network with a static IP address. Who did the trick. Even if the printer is in "sleep" for several hours, it has not disappeared in offline mode, as it is done before. Problem solved for now. Hope this helps others.

• Microsoft Wireless 3000 v2.0 keyboard

  @ key is of type 'when using SHIFT @ key. The only way to get is to press the "Shift" keys. The CD was not provided with the English UK version can't find software on the microsoft for English UK wewbsite. Is there a solution to fix this problem? Can anyone please help.

  Hi barryhowe,

  1. to when was the last time the keyboard was working fine?

  2. are you having similar problem with the other keys on the keyboard?

  3. Why do you need the CD in version English UK?

  See the Microsoft article below and try the steps mentioned, check if it helps.

  Troubleshoot the incidents of the response to the wireless keyboard or

  http://support.Microsoft.com/kb/838398

  Added support to contact Microsoft hardware support.

  http://www.Microsoft.com/hardware/en-us/support

• My Copier says stack copies sleeps and don't copy

  It copies

  Contact the company that made your Copier and see what they say about it. This isn't a Windows, or a problem of Microsoft.

• My dell 1545 is the "standby" and don't wake up mode

  I have a del Inspiron 1545 and is in "standby mode" and is been like this for nearly three days the power lite turns on the fan comes in two seconds, but then it does nothing

  If always "standby mode" after hitting enter key or move the mouse, I would recommend, hold the power button until the PC turns off. Then click on the Start button / stop and reboot. You can check the power settings in the control panel to see how it is configured. You can change these settings as to how much of time of inactivity before switching mode to 'sleep'.

• HP Vista computer will enter into the 'sleep' and not to wake up?

  The computer will go to sleep while I'm on after about 10 minutes of use, and then, I am not able to wake up.  I have to turn it off and sometimes when I turn back on it will start in safe mode window.  I can't even run my antivirus because the computer did not stay long enough.  I checked the power plan settings and also tried to restore but he fell asleep before finishing.

  Hello

  1 I want to erase the General corruption and repair/replace damaged/missing system files:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------

  Shoot sleep problems - hibernation
  http://www.computerperformance.co.UK/Vista/vista_hibernate.htm

  How to solve a problem of Mode for Vista and find a Solution
  http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.html

  How to enable and disable Hibernation - you can try to disable and re-enable the it. http://www.Vistax64.com/tutorials/165508-hibernation-enable-disable.html

  How to restore the default power in Vista (and then go back and change as you wish)
  http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.html

  How to troubleshoot performance problems with sleep, hibernation and resume in Windows Vista
  http://support.Microsoft.com/kb/950686

  Panel configuration-Device Manager - look at the settings for the network card, WiFi, Modem power management.
  and other devices. (Double click on the device and the power management tab)

  Panel configuration-Control Panel Home view (non-conventional) in the top-right search pane
  type of hibernation - see turn Hibernate on / off

  All the default power plans and then set them as you wish.

  I hope this helps.

• When putting the computer to sleep and then attempt to wake the computer, it has been turned off.

  Original title: win 7, will not wake up from slumber died

  Just installed a new ssd and reloaded win 7 and all updates. When I put to sleep and try to wake the computer has been turned off. Although the keyboard lights, but I have to push the power button and the computer restarts and displays the screen of abnormal termination. Help

  This is what I found. Installation of Win 7 and the corrupted BIOS. Re-installed both and everything works well.

  Thank you

• "HP - Pavilion x 2 10-n054sa: HP - Pavilion x 2 10-n054sa 10.1" 2 in 1 - white is in mode "standby"and wouldn't wake up

  My notebook went to sleep mode and won't start. It is difficult to find the restart button. There is no way you can remove the battery.
  
  Why my pc decided to go fashion 'sleep' and would not wake up? How can I Tickle she was with me again?

  Oh! I rang HP support center and got a really helpful man. He knew the problem exactly and gave me the clue:

  1. remove the Tablet from the key board.

  2. press and hold the power button on the upper right and the side 'less' of the volume key on the right side of the tablet at the same time for 20 seconds and then release.

  3. wait for a minute or two restart the tablet.

  The prudent man, leave any machine with a hard drive on during more than 30 odd minutes will keep the machine mode 'sleep', but the hard drive may stop and may not ride as usual.

  So, if you leave your laundry for more than half an hour, please turn off properly.

• M1132 don't wake. When I hit the button start-stop, but it then doesn't not scanner/photocopy

  Hello

  I just bought this Laserjet M1132 MFP.

  He goes to sleep and the next time, it won't wake up. I jiggle with all the buttons on the machine, without exploitation. I use win8. Preferences has nothing on the sleep options.

  When I click on one = off button shut down shut down and restart, it prints. But then it doesn't scan or photocopy antything, it does not do anything, just blank pages.

  I need to plug in the printer power cable off, hang it upwards again once, and then it works.

  Really frustrating feature

  Well, directly plugin was not the solution. I updated the win8 Office and downloaded and updated the firmware of the printer from the HP website.

  Now he'll still sleep and yet not wake when I have something to print, send, but hit the on/off button wakes up the computer and it scans and photocopies now after the update of the firmware and update the computer.

  Thus, no congratulations, but thanks

• How can I change my mobile mode 'sleep and/or standbay' with wireless keyboard Microsoft model 3000

  Original title: I just bought Microsofts model 3000 wireless keyboard

  I can't find a function key that I can spend my laptop mode 'sleep and/or standbay '. How can I make this wiith this probuct?

  Hello smilingron,

  You have a sleep button separated from the keyboard that you can use to put the computer to sleep. You can consult the manual that came with the keyboard gives you will help you to find the right key.

  Thank you
  Irfan H, Engineer Support Microsoft Answers.

• Microsoft WIRELESS 3000 keyboard and mouse do not work.

  I bought a set with wireless keyboard and mouse and even pretend to be plug-and-play, I couldn't make me work.

  What should I do

  Reference is Microsoft WIRELESS 3000

  Thank you

  Original title: keyboard and wireless mouse

  I'm still using keyboard and mouse cables so I'm not sure, but this help - http://support.microsoft.com/kb/838398/en-us , he mentions "Microsoft Wireless Keyboard 3000" in the list "applies to. At least, it can give you some advice. Also, If your kit is in this list - http://www.microsoft.com/hardware/en-us/downloads#keyboard - it seems that type/etc. Intelli point software is here.

  I hope someone else can "chip" with a response if the foregoing is of no use.

• HP Envy D410a computer sleep and offline wireless OSX problem

  Hello

  I'm new but I searched on this forum as well as the apple support forum to get answers.  The problem, I tried to correct is limited to the Wireless business.   I'm under 10.6.7 OSX and Windows 7 64-bit.  Now I can constantly reproduce the problem of the printer goes offline on a Mac, but the D410a works perfectly with Windows 7 64 bit.  I can stop the windows computer or put it to sleep and to restore power or he wake D410a functions perfectly.

  When I put my Mac to sleep then wake him up, I lose the connection to the D410a.  Specifically, I'm trying to print or scan him unsuccessfully using "Preview", the HP Scan 3 utility, as well as the location of Print & Fax that allows you access to the parser.  Try several suggestions throughout these forums, I was able to partially address the problem. I read on the issue of the "Energy Saving" being a problem feature.  I tried power saving setting in the options "after 5 minutes of inactivity" and "after 15 minutes of inactivity'.  But the problem seems to come from the Mac.

  I put my IP on the D410a address to an IP address outside DHCP (static IP).   I fiddled with the configuration of the router, ensure that the printer signal is strong, or that the router is to remember its location.  I played a bit with port forwarding, (don't know what I was really doing). I have checked the firewall settings on the Mac, and they turned off the coast.

  Now as I said earlier, the only way I can get the D410a to respond to any request of Mac such as printing or scanning wireless. is either entering in my router (Dlink DIR - 655-cutting) and make some changes and save the settings.  I guess that's somehow resets the D410a and becomes available on my Mac.  The other way I can 'Reset printer' is on the print server and playing with a few features.  Specifically, I changed the gateway to 0.0.0.0 and the printer printed what was on the qeue.  After having put the Mac to sleep he lost the connection.  I changed the gateway to 192.168.2.1 and the printer and the scanner have been "reset".  Finally, it loses the connection to the Mac.

  Please, help me with smoothing this mess.  I like to use Windows, but there are things on my Mac that require the use of the D410a.  Have work would improve my workflow.  I just got this printer today and I'd rather not go through the hassle to return because I bought this printer for its quality of size and compact construction.

  ... I forgot to mention that I tried to completely reinstall the software.  I also tried an installation of the drivers in a specific order.  1 uninstall the HP drivers > restart Mac > add printer drivers and install Apple HP > download full HP drivers from the website and install.

  Check if your router multicast/IGMP proxy and transmission to enable them if they are not. They mess with re-discovery service of HP I think.

  Let me know if it works