Work/uninstall Microsoft Livecam HD-5000 problems

Similar Questions

• Telephone calls from a man saying that he worked for Microsoft and he had problems in my area

  A man rang today saying that he worked for microsoft and he had problems in my area and if I turned on my computer it will help solve the problem. ???

  It was an international call, but I said that I had not reported any problems. What is going on???

  Relatively new user to the computer

  Hello

  Its a SCAM!

  In the United States, you can contact the FBI, Attorney general, the police authorities and consumer
  Watch groups. Arm yourself with knowledge.

  No, Microsoft wouldn't you not solicited. Or they would know if errors exist on your
  computer. So that's the fraud or scams to get your money or worse to steal your identity.

  Avoid scams that use the Microsoft name fraudulently - Microsoft is not unsolicited
  phone calls to help you fix your computer
  http://www.Microsoft.com/protect/fraud/phishing/msName.aspx

  Scams and hoaxes
  http://support.Microsoft.com/contactus/cu_sc_virsec_master?ws=support#tab3

  Microsoft Support Center consumer
  https://consumersecuritysupport.Microsoft.com/default.aspx?altbrand=true&SD=GN&ln=en-us&St=1&wfxredirect=1&gssnb=1

  Microsoft technical support
  http://support.Microsoft.com/contactus/?ws=support#TAB0

  Microsoft - contact technical support
  http://Windows.Microsoft.com/en-us/Windows/help/contact-support

  I hope this helps.

• Microsoft lifecam hd-5000 problem Installtion

  My system is Windows xp home edition. I have uppluged and reconnected to my usb port several times, tried different 2.0 ports, connected my old webcam and recognized computer, restarted my computer several times and reinstalled at least four times. I have two original disk Microsoft hd-5000 3.0 installation and I tried both, I do not see the web cam in Device Manager. I don't understand why my computer recognizes my five or six web cam when you plug it in but nothing when I plug the Microsoft hd-5000.

  Hello

  1. you get any error message?

  2. the Microsoft lifecam works any other computer?

  3. don't you make changes to the computer before the show?

  Please follow the steps below.

  Method 1:

  Run the Microsoft Fixit from the link below.

  http://support.Microsoft.com/mats/hardware_device_problems/

   

  Method 2:

  Follow the steps from the link below.

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  http://support.Microsoft.com/kb/322756

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/929087

• My Microsoft Wireless Mouse 5000 new scrolls only in one direction in Quicken. This seems to be the only program with problems. All the answers?

  My Microsoft Wireless Mouse 5000 new scrolls only in one direction in Quicken.  This seems to be the only program with problems. All the answers?

  Hi retiredinflorida,

  Welcome to Microsoft Vista answers Forum!
   
  It is a known issue using IntelliPoint from Microsoft and Quicken software drivers.  Both parties are aware of the problem and as soon as a hotfix or patch for this problem is available it will be displayed on the Quicken Web site so check with their website on a regular basis.
   
  However, if the Microsoft Wireless Mouse 5000 problems in other applications, you can check the links below.

  The Microsoft wireless mouse does not work as expected if:

  You may want to consider this link to fix the problem: http://support.microsoft.com/default.aspx?scid=kb; EN-US; 838398

  In the case want ot uninstall and reinstall the mouse drivrs use this link: http://www.microsoft.com/hardware/windows7/support.mspx

  Hope this information is useful.
  Let me know if it worked.

  Thank you, and in what concerns:
  Aziz Nadeem - Microsoft technical support.
  Visit our Microsoft answers feedback Forum
  http://social.answers.Microsoft.com/forums/en-us/answersfeedback/threads/ and let us know
  what you think

• Software problem Microsoft Livecam

  Hello

  I am a technician of help for a City Desk and I have problems with the software Microsoft LiveCam.

  One of our offices using a MS HD 6000 Lifecam to take pictures of people for their records.  Yesterday, there was a change made to their AD account (we changed the server to that their files redirect) and now the software will not work.  I went, and the error message says that it couldn't find the Lifecam files.  (Shown below) troubleshooting guide gave no real help.

  

  So I reinstalled the software on the user (standard user, not admin) account and authorized installation with our Setup Administrator account and got the same message.  Then I launched the program on behalf of users using the command run as Admin and it worked.  I looked at the photo directory and noticed he was recording the files for the Setup Administrator account.  There is no place in the installer or even in the software that would allow me to change the default save location.  It seems to me that the software was written to save in the photo folder of the admin account that has installed the software.

  My questions are: 1) does anyone know how to change the default folder location in this software and 2) if I don't change the location, would have made the user a local administrator, software installation, and then downgrade the user to the standard allowing them to use the software (my sysadmin wouldn't let me try this option without research)

  The operating system is Win 7 pro 32 bit fully patched. LiveCam software came directly from the material Ms download page

  Hello Sean,.

  Thanks for posting your question on the forum of the Microsoft community.

  The question will be better suited to the audience of professionals on the TechNet forums.

  I would recommend posting your query in the TechNet Forums.
   
  TechNet Forum
  http://social.technet.Microsoft.com/forums/en-us/home?category=w7itpro

  Thank you

• How to uninstall Microsoft Works Suite 2002? I have the installation disc. Course programmes: Remove does not work.

  Uninstall Microsoft Works 2003 on XP. I have the original installation disc.  I want to install Office 2010.

  You can uninstall works to add/remove programs in Control Panel, look for work 2003 and uninstall.

• Will be a work of Microsoft Bluetrack Wireless Mouse 5000 with a Microsoft 3000, 4000, 5000, 6000 USB mouse receiver V2.0?

  I have a Microsoft Wireless Mouse 5000 to set keyboard/mouse Bluetrack. I need a new transmitter/receiver for the mouse as the keyboard is connected to another computer and using the transmitter/receiver provided with the set. My mouse works with a different transmitter/receiver?

  Hello

  1. you have the Microsoft transceiver?

  Try the steps below to connect to Microsoft Transreciver.

  (a) press and hold the Bluetooth button on the bottom of the mouse. If your device is equipped with a battery indicator light, it flashes red/green to indicate that the device is discoverable.

  (b) on your computer, open the Bluetooth software. The Bluetooth software is usually found Control Panel in the start menu. For more information, see open the Bluetooth software below.

  (c) in the devices tab, click Add

  (d) follow the instructions that appear on the screen.

  (e) If you are prompted for a passkey, select no password. The Microsoft Bluetooth mouse devices do not work with a random passkey.

  You can see the following article for more information:

  Connect a Bluetooth device that are neither require a TRANSCEIVER

  http://support.Microsoft.com/kb/952818

  If you use a third-party receiver, you can consult the following link and check.

  http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/76eea589-C264-4e7d-81A9-9b918ef9ffe6

• How can I uninstall microsoft 8 without a cd__ works

  Impossible to uninstall through Add Remove programs

  This article also applies to Vista or Windows 7.

  How to manually remove programs from the add tool / remove programs
  http://support.Microsoft.com/default.aspx/KB/314481

  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\Works2008Setup

  The value named "UninstallString" can have a data value entry similar to this "C:\Program Files\Microsoft Works Suite 2008\Setup\Launcher.exe /ARP D:\". »

  D:\ "probably refers to your CD/DVD drive.

  It is likely that calls for the CD.

  Take a look at some of the programs to uninstall third party such as 'Revo' that exists in the market.

  Uninstall utilities
  http://www.SnapFiles.com/freeware/system/fwuninstallers.html

  Solved: MS Works 8 will not uninstall
  http://forums.techguy.org/archive-business-applications/754737-solved-Ms-works-8-will.html

  During the uninstallation of Microsoft Works 8.x, you are invited to the location of the file works8.msi
  http://support.Microsoft.com/kb/2015113

  http://www.Google.com.au/search?q=uninstall+Microsoft+Works+8+without+a+CD&SourceID=IE7&RLS=com.Microsoft:-to the: IE-address & ie = & oe = & redir_esc = & ei = osSwTMmCNIiqcbWonOUN

  References or links to the Windows Installer Cleanup utility can be difficult to follow, because this tool has been removed by Microsoft (see article).

  How to uninstall the suites Office 2003, Office 2007 or Office 2010 so I can't uninstall it from Control Panel?
  http://support.Microsoft.com/default.aspx?scid=kb;en-us;290301#appliesTo

  The tool may be available if you search Google for it.

  Other options include manual removal, or find the CD.

• Uninstall Microsoft work 8

  How to uninstall Microsoft Works 8 manually when it does not uninstall via Add/Remove programs. Whenever I tried to reinstall, I get a message that it is insalled. When I try to uninstall it gives me an error message that Works8.msi is not installed.

  Hello

  These should contribute.

  Spotlight utility Windows Installer CleanUp Utility
  http://TechNet.Microsoft.com/en-us/magazine/2008.08.UtilitySpotlight.aspx

  Description of the Windows Installer CleanUp utility
  http://support.Microsoft.com/kb/290301

  Windows install 4.5 Redistributable
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  --------------------------------------------------------------------
  Revo Uninstaller - free - great utility to uninstall programs
  http://www.revouninstaller.com/revo_uninstaller_free_download.html

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• When the phone rings it temporarily blocks access to internet on my laptop. I ran "Troubleshooting" and he said the teredo tunneling adapter microsoft has a driver problem (code 10)

  Teredo tunneling adapter error: Code 10

  I have a wireless modem in my house.  When the phone rings it temporarily blocks access to internet on my laptop. I ran "Troubleshooting" and he said the teredo tunneling adapter microsoft has a driver problem (code 10) and I have to click "Reinstall driver" I did.  But it will not re - install.  I'm not too irritable.   Can help you.

  In addition, I don't know if there is a related problem, but my laptop takes a long time to communicate with the printer.   The doc will be in Quebec but does not print.

  Thank you.

  Hi LindaGreenwood,

  1. what operating system is installed on the computer?
  2. you have made no changes to the computer before the broadcast took place?

  Generated 10 error code when Device Manager does not have enough information or error that spread upwards by device drivers is not recognized by Device Manager. In addition, this error may occur if one of the pilots who needs the unit does not start. If multiple drivers are used by a particular device, it can be difficult to determine which failed.

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
  http://support.Microsoft.com/kb/943104

  I suggest you uninstall the drivers completely uninstall and then reinstall the drivers from the manufacturers Web site.

  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-in/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

• Uninstalling Microsoft Office has failed and cannot uninstall or install anything else.

  Original title: install problem HELP

  I tried to uninstall Microsoft Office and it failed several times. And since then I have not been able to uninstall or install anything else! A pop-up Windows Installer that says "preparing to install" appears occasionally. I tried about 100 things and nothing really worked! Can someone HELP me please?

  I tried before, but nothing helped. I just restore my computer to its factory settings, that fixed it.

• Uninstall Microsoft SQL Server 2008 R2

  I want to uninstall Microsoft SQL Server 2008 R2 from my computer. But when I try to do it I get the following message is displayed:

  "Managed SQL Server ARP Dialong has encountered a problem and needs to close." We are sorry for the inconvience. If you were in the middle of something information you were working on might be lost. »

  Then, I can not remove the program

  Can you tell me how to remove this program in plain English if you would ' t mind thanks

  E-mail address is removed from the privacy *.

  Then

  I don't know if it works... the only things that come to mind...

  1 have you ensured that it does not work when you try to uninstall.

  2. found in forummm another... "finally got the client tools and Management Studio installed. What I did was remove Microsoft SQL Server 2008 Native Client in Add / Remove Programs (before I was trying to uninstall Microsoft SQL Server 2008, and it has failed). After Native Client has been removed, I reinstalled the client tools and management studio from a dvd (was iso before mounting). Everything installed perfectly. »

  3 disabled your anti-virus during uninstall

  Then others above, I suggest you report here...

  http://www.Microsoft.com/sqlserver/2008/en/us/forums-blogs.aspx

  --
  Gina Whipp
  Microsoft MVP (access)

  Please post all responses on the forum where everyone can enjoy.

• Uninstalled microsoft fix, now if I try to go to microsft to fix the Center I can't fix Center after login.

  I uninstalled microsoft fixed it believe I had a bad download, I can't fix it Center microsoft, fix internet explore a few trys to get to the Center over and over again after the signing, I can't download the microsoft fix it yet how to fix microsoft or how to download microsoft it back?

  Here's where to download the beta version: http://www.windowslive.com/Connect/Post/1e77dd4f-a412-4bd4-9109-9abd2d219c78.  Here's another site, if this one does not work:http://www.freewarefiles.com/Microsoft-Fix-it-Center-2010_program_56536.html.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Microsoft Bluetooth Notebook 5000 - I can click but the cursor does not move

  Greetings,

  I have a Bluetooth Notebook 5000 mouse that has a weird problem. It is well connected to my computer bluetooth, and I have all the updated drivers. Since last week, when I move the mouse, the cursor does not move (on the screen), but when I click on (either on the middle left, right, even scroll to the top and bottom), it works.

  My guess is that the laser under the mouse thing is probably broken. I tried different surfaces to see if I got any kind of reaction, but none works.

  Now the other problem is that the PID (as well as other numbers) number under the mouse is partially illegible due to wear. I can't see the last part of the PID.

  Anyone got any ideas? And is there a way that it could be replaced under warranty, even with an incomplete PID?

  Best regards

  Philippe

  Hello Philippe,

  Thanks again for the update.

  It is possible that there is a hardware problem.

  I suggest you to contact Microsoft hardware support.
  Reference:
  How to replace Microsoft software or hardware, order service packs and replace product manuals
  http://support.Microsoft.com/kb/326246

  Thank you

• Microsoft bluetooth notebook 5000 mouse does not

  Original title: Microsoft bluetooth notebook 5000 Mouse-mouse

  Microsoft Bluetooth Notebook 5000 mouse installed easily.  It stopped working a few days later.  Then it started to work again a few hours later.  It stops in the middle of a session, or when the computer is idle.  I have a Dell Vostro with Windows 7, a few months older. I tried several solutions found online but none so to work.  As I said, he stops spontaneously and spontaneously starts again.  Right now it does not work.

  Hello

  1. you receive an error message?

  2 have you made changes on the computer before this problem?

  Method 1:

  You can run the fix - it mentioned in the following link.

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Method 2:

  You can consult the following links.

  Troubleshoot a wireless mouse that does not correctly

  http://support.Microsoft.com/kb/321122

  Troubleshooting Wireless and Bluetooth problems

  http://www.Microsoft.com/hardware/en-us/help/support/troubleshooting/mouse/wireless-Bluetooth

  Method 3:

  You can consult the following links.

  Troubleshoot the incidents of the response to the mouse or wireless keyboard

  http://support.Microsoft.com/kb/838398

  http://www.Microsoft.com/hardware/en-us/support/troubleshooting

  See also:

  http://www.Microsoft.com/hardware/en-us/d/Bluetooth-Notebook-Mouse-5000

  http://support.Microsoft.com/kb/811798

  http://social.technet.Microsoft.com/forums/en-za/w7itprohardware/thread/7d77d07b-0af0-4aca-aba8-2a0d5429fe3a