XP froze in the middle of the system restore and I have no cd, y at - it somewhere that I can download it legally to re - install, or another type of correction?

Similar Questions

• I can't do the system restore and I have nothing on my "All programs" button, which means that I have not accessories, System Tools, etc. How can I get that back?

  I can't do the system restore and I have nothing on my "All programs" button, which means that I have not accessories, System Tools, etc. How can I get that back?

  Hello CalebCox,

  I suggest that you try the methods below to resolve this issue.

  Method 1:

  This problem can be caused due to infection by the Virus. I suggest that you run a virus scan on your computer using Microsoft Safety scanner and check if you have the same problem.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Check if you have the same problem in the new user account.

  You can refer to the link below, which will give you information on how to create and configure user accounts in Windows XP

  http://support.Microsoft.com/kb/279783

  If works, you can copy data to the new user account:

  http://support.Microsoft.com/kb/811151

• Unable to connect to the internet after the system restore and Windows Installer (Vista)

  Hello

  I have recently restored the whole system on the HP to my sister a virus that I was unable to remove it manually.
  The system restore went well until it has reached the point where he was going to reinstall Windows. The computer just turned itself off and the software installation was not complete. I am able to reinstall again. I must therefore hold the CTRL + alt + delete, go to Task Manager, click on audit.exe and complete the process to turn on the computer. But I can't do anything with it in safe mode. The main problem is: I can't connect to the internet! Even if the network discovery is on it will not find my wireless network. What can I do on the internet? And is it possible to install Windows again without the CD?
  Thanks in advance!

  Hello

  ·        You are able to boot to the desktop in normal mode? If this isn't the case, then you get any code or message?

  ·        How did you did system restore?

  ·        Are you referring to the system recovery using the recovery partition or the drive?

  I suggest that you start in safe mode with network and check if you can access the internet?

  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

  Note: select SafeMode with networking among the startup options.

  Respond with the required information so that we can help you further.

• Virus will not let run me the system restore, and I can't understand how to run a system recovery because there is no return upwards for this computer. It's a basic vista.

  When the computer starts, it must choose to leave a program unknown to the system access everything else it shows is a black screen. When you click on allow, he pulls up a virus scanner that says he has all sorts of viruses, but the program is the virus itself, because this virus program is not really on the computer. When you try to run the system restore, it says that this option has been disabled by the administrator. Also, I can't find how to run a recovery of the system and start the computer to its original settings. Help, please. It's not my laptop which is having this problem, but my roommates computer. Thank you for your time, I've ran out of ideas and was seriously in need of a little help. I tried to repair the system running through prerssing F8 in the boot menu and has not worked. also try the system restore via the SafeMode command prompt does not work either.

  Download Malwarebytes' Anti-malware using another machine. Install it in the
  your roommate infected computer in safe mode and run. Accept all default settings.
  Don't forget to do a backup when offered. I hope you find and
  eliminate the infection.
   
  "crashbbandicoot" wrote in message
  News: 351ebb9b-60aa-47 d 2-9b 13 - e309f4ee035b...
  > When the computer starts, it must choose to leave a program unknown
  > access the system all that it shows is a black screen. When
  > you click on allow, he pulls up a virus scanner that says that there are all kinds of
  > but the virus program is the virus itself, because this virus program is
  > not really on the computer. When you try to run the system restore it says this
  > option has been disabled by the administrator. Also, I can't find how to
  > system recovery and boot the computer back to its original settings.
  > Please help. It's not my laptop that is having this problem, but my
  > computer of roommates. Thank you for your time, I'm out of ideas and
  > seriously needed a little help. I tried already running
  > repair system through prerssing F8 in the boot menu and has no
  > work. also try the system restore via the SafeMode command prompt has no
  > not work.
  >
   
   

• You try to run the system restore and get this error__unexpected error filename directory or volume label syntax incorrect (0x8007007B) __What can do?

  Try to run system restore and get this error
  error unexpected filename directory or volume label syntax incorrect (0x8007007B)
  What can I do?

  Hi Larry Bogie.

  1. you receive error message when creating point system or performing system restore?

  2. did you of recent changes on the computer?

  Usually, this would happen if there is any place in doubles in the system restore properties.

  To set the path of the appropriate Windows Vista restore point as follows:

  (a) click on the Start Menu.

  (b) type sysdm.cpl in the start search box and press .
  The user account control window will prompt you for permission to run the program.

  (c) click continue.
  The System Properties window appears.

  (d) click the System Protection tab.

  (e) to the automatic restore points, uncheck the any location invalid or duplicate

  (f) click to check drive C: with the Windows Logo.

  (g) click on apply, and then click Ok.

  (h) restart the computer and check if it works.

  System Restore: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• recently performed the system restore and now I have no internet connection

  I recently had to restore my computer and after I network and sharing Center says there is no connection available. I hit troubleshoot and diagnoses say that connection 8 - avg network filter driver-0000 box card problems. also when I try to disable my avg firewall, I get an error message saying: the specific registry key does not exist. What do I do?

  It would be useful to know why he had to use the system restore... In any case.

  Download and run the appropriate AVG removal tool
  http://www.Avg.com/us-en/utilities

  Maybe it's enough for the difficulty of access to the Internet.  If there is still a problem that run at an elevated command prompt - netsh winsock reset

  Of course, make sure you reinstall AVG or another anti-malware program.

• A run the system restore, and now my Adobe Acrobat license has exceeded its limit

  I tried to restore computer because of a corrupted installation and it deleted Adobe Acrobat, since the system restore did not work, I have reinstalled the operating system, corrected and then installed Adobe Acrobat Professional of XI, entered my license and it comes up with amounts excesses of this license. I would just get the license reactivated. Any help would be appreciated. I tried to call and Adobe is closed on weekends, cat I tried but nobody came online in some time so now, try the forums as they are 24/7.

  Thank you-

  Jake

  You need to talk to Adobe, not users on the forums, because only Adobe can reactivate something on their end.   I guess the numbers increase during the work week.

• computer could not reboot after the system restore and now do not start or respond to f2 or f8

  My brother prefomed a system restore, after restoring the system, that it has restarted, however never got to the windows form.

  Then he turned the system with a difficult start, which got stuck before the windows screen.

  so after I told him trying to start with f8 during boot, this has had no response.

  then I had him find his records recovery and told him to start while now the f2 and his computer crashes when you try to find its usb devices.

  I have no idea of what is wrong and worry that it will not respond to f8 or f2 start

  Look at the top right of your keyboard.

  You can have a F-Lock key that prevents you using F2 or F8.

  See you soon. Mick Murphy - Microsoft partner

• Impossible to access the system restore, getting the error "system restore has been disabled by group policy.

  Recently, I was hit by a virus that, among other problems, he blocked my access to the system restore to clear it. After having had my pc repaired I can not even access the system restore or my registry. I get a message from that system restore has been disabled by group policy. It's my own pc and I am the administrator. I've tried a few things without success. I hope someone can help me with this. I have the vista operating system.

  1. click on start, run and type regedit.exe , and then press enter

  2. navigate to the following key:

  HKEY_LOCAL_MACHINE-Software-policies-Microsoft-Windows NT------SystemRestore

  In the right pane:

  • Delete the value DisableConfig
  • Delete the value DisableSR

  3. exit the registry editor.

  Other tips, tricks and support are available at: www.waltwachon.weebly.com

• Is it possible to restore the documents if the system restore has not been activated previously?

  is it possible to restore the documents because I turned off then turned on the system restore and lost all my documents. help please an old lady of 61, who needs these documents for school

  E-mail address is removed from the privacy *.

  * original title - documents can be restored from HDD after system restore has been turned off the on *.

  Hi jacqulinekleiss,

  If the system restore is off turn on the computer of all available restore points will be deleted and you will no be able to return to the previous state.

  System Restore "restore points" are missing or deleted

  http://support.Microsoft.com/kb/301224

• I received the error message: 0x0000ffff after running the system restore

  Original title: 0x0000ffff

  has run the system restore and got this error code. How should I do?

  Hello

  could a. you give the error message as well?
  b. are you try to create a system restore point or restore the computer to a previous state?

  c. Why do you try to restore the computer to a previous state?

  We can try the following methods and check.

  Method 1.
  Disable the security software and then try to run the system restore and verify.

  Method 2.

  Let us run restore the system from the command prompt and check. Follow the steps described in the article below to get there.

  Start the restore of the system from a command prompt
  http://Windows.Microsoft.com/en-us/Windows7/start-System-Restore-from-a-command-prompt

  Method 3.

  I also advise to use the boot minimum troubleshooting to find the conflicting program.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135

  You can also consult the methods listed in the section below to learn more.

  No restore points are available when you use Windows Vista, Windows 7 or Windows Server 2008 operating system in a dual-boot with an earlier Windows operating system configuration
  http://support.Microsoft.com/kb/926185

  System Restore: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Do not click Next in the system restore. A similar problem here not found.

  Hi all! I'm trying to restore my HP Pavillion 1650 XP at an early stage a system restore starts fine but... When I get to the screen just after that I selected the date to restore, but before it will re-start and I click Next nothing happens. The box just stays there and I can click then everything I want but nothing happens. I am running XP SP2 with all the latest updates installed.

  Thank you

  Please completely read this broad message about restoring the system and begin by the two scans mentioned in the last part:
  You are a Service Pack behind (you should be on SP3).
  Have you ever used the system successfully restore in the past?
  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..
  What is the issue that you are experiencing that you think that the system restore will be remedied (or you are just convenient)?
  Some tools Anti Virus 'protect' your system so that they will not restore the system work properly.
  For example, if you use Norton/Symantec products, you will see a message like this:
  Restoration incomplete. Your computer cannot be restored...
  It is also a popular Symantec problem (well, I'll be polite and call an "undocumented feature"...), they wrote an article about it:
  http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013
  According to what you use for malware protection, you may need to disable the product temporarily, do the system restore and then turn the products light up again when the system restore is complete.
  Sometimes you need start your system in Mode safe and so that your protection programs are not running, and then do the system restore.  Tips from Microsoft in some of their articles that if the system restore does not restore your computer, start in Safe Mode, and then run the system restore.  It works for some configurations.
  System Restore is sometimes so afflicted or Restore Points are suspicious, the best solution is to reinstall your system restore.  This will remove the old Restore Points, but sometimes it's the only way to fix a broken system restore.  You don't have to reinstall XP, only the part of system restore.
  That can leave you with your problem of unspecified origin that you hope the system restore will fix (using a system restore is not equivalent to 'fix' the problem though).
  Give these ideas some consideration if they apply to you.
  Sometimes malicious will afflict your system restore to prevent you to find and remove malware.  It would much rather you trick into thinking that you need to repair or reinstall your XP when it is not necessary.
  No matter what you use for protection against malware, I do so and then only begin to solve any problems:
  Download, install, update and do a full scan with these free malware detection programs can solve any problems:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  It can be uninstalled later if you wish.
  The scans by operating clean, reboot, test and we can fix any other issues.

  Do, or do not. There is no test.

  I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

• Unexpcted the system restore error

  When I try to use the system restore, I get this:

  There was an unexpected error.  Class not registered (0 x 80040154).  If please close the system restore and try again.

  Only tent still once does not work.  It gives me just the same message.  How can I fix it?  I have run the checker system files & nothing damaged were found.  I am running Windows Vista Home.

  Thank you in advance for your help!

  Hello

  This can help you:

  1. If you are using Norton, you should disable Norton inviolable Protection before using the system restore.

  http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013

  AVG will cause problems with SR too.

  «Temporarily disable AVG»

  http://www.Avg.com/ww-en/FAQ.Num-3857

  2. try to use Safe Mode system restore.

  http://bertk.MVPs.org/html/restoresysv.html

  3 Malware will stop at the system restore.

  Download, install, update and scan your system with the free version of Malwarebytes AntiMalware, if necessary in Mode safe mode with networking:

  http://www.Malwarebytes.org/products/malwarebytes_free

  And here's how to go in Safe Mode options; Select safe mode with networking from the list of options:

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  See you soon.

• My office is frozen and I can't do the system restore.

  tech support said there is no virus, but the CPU usage is probably blocked. I itried to do the system restore and it wont...

  Select Sys + Ctrl + ESC, click the Applications tab and place the cursor on a running application in the list and click end task. Repeat if necessary. You may need to show patience.

• Microsoft - accidentally not uninstalled games not in the Recycle Bin, lost the system restore does not work

  Hi I have uninstalled a few programs and lost microsoft games in the process, have tried the system restore and cannot find them in the Recycle Bin, restore says system 0x8100001A and 0 x 810000101 code

  Hi I have uninstalled a few programs and lost microsoft games in the process, have tried the system restore and cannot find them in the Recycle Bin, restore says system 0x8100001A and 0 x 810000101 code

  Assuming that yoy are using Vista...
  Suggestions:

  1. start > all programs > scroll down to find GAMES > open it. MS games still appear? > If Yes, click on one of them > it does not open and it works?

  2. see if this Microsoft Support can be applied to your situation:
  http://support.Microsoft.com/kb/940263 . for the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.