NI Hardware

Hello I have a motion control project where I would record the position data. High speed capture is limited with sampling frequency of 2 kHz. But I have to save a lot more than higher speed. I read that there is another option that connects to the mo

We use PXI NI Motion Assistant 1031 and measuring and Automation Explorer. Our limit switches always read assets, and when we enter the Configuration of the axis to try to change things, something creates a loop of update that prevents us from changi

Hi, guys. I'm working on my project now. Right now I use PCI 7344, UMI-7764, AC/DC motor sevro, their amplifiers and the camera of the UAB. I try to repair the braiding point machine to weave leadership x. usually the Plait point oscillates around a

I have a system controller 8176 under XP. OR PXI-devices are not detected plug-and - play. Last XP and OR corrections updated. The system has 512 MB of ram and > 10 GB of free space on the disk. No "yellow marks" ion device with the exception of the

I have a few tips that are not compatible DAQmx and do not appear in MAX (4.6). I want to configure them to traditional DAQ, but if following the instructions (Tools / traditional DAQ/Remote Configuration) the error "connection to the remote computer

I use the relay Board NI PXI-2503 and the NI TB-2605 terminal block to impliment some of interconnections, my question is on the Terminal it is a GROUND terminal on the GND PIN. What electric pins or card background basket or internal relay Terminal

Hi all!! Please help me! I PXI-8183 with Labview Real Time 8.5.1 software and I want to change my Labview 8.6 real-time, how can I do? Thank you concerning

Hi all I have trouble to synchronize 2 FPGA. I want to check which one is the master (the production trigger signal) and who is the slave. I was faced with a strange problem that I've isolated in a simple program, see project attached. This program a

Can I determine the amount of memory on the PXI-5124 visually? I don't see a reference as 778757-02 on the map.

I plan to buy a controller PXI real-time Embedded for security monitoring. Is it possible to use the video output of a controller PXI running RTOS to display a LabVIEW RT application messages? According to the literature, it seems that the use of the

Has anyone tried running an off AC running at 400 Hz PXI chassis?  We have problems with the power supply for our location data acquisition system in an aircraft and 400 Hz seems to be the best option for a continuous power. Matt

I have a simple motion application that I am trying to troubleshoot. I move my engine from the initial position to the specified user target position to the front. Then, I want to come back home (in reverse). However, each time I have use find refere

Hello I was trying to figure out how best to use LabView to download a routine ("program") in an engine of MDrive (17 or 23).  Apparently, you can download a program through some hyper terminal software.  But I think to change the internal engine pro

Normal 0 21 false false false SL X-NONE X-NONE MicrosoftInternetExplorer4 / * Style Definitions * / table. MsoNormalTable {mso-style-name : « Navadna tabela » ; mso-tstyle-rowband-taille : 0 ; mso-tstyle-colband-taille : 0 ; mso-style-noshow:yes ; ms

I recently bought a Board "Mosquit-IO" of Trossen Robotics: http://www.trossenrobotics.com/Mosquit-IO.aspx He said do anything to control the servos connected to the Board of Directors is to send a command like: 255 25 42 69 25 42 69 / r Where the or

Hello I am writing an application to control a servo AC motor. It is based on reviews of couple. I use a state machine architecture. The result I'm aiming is, (1) the engine operating at a user specified speed and accel/break. (2) every time that the

I'm trying to find some materials that can be used to control axis 6 or 9 axes.  Specifically, I need 10V analog outputs to control the drivers and specialized controllers. What kind of material I could use to achieve this?

Hello I am currently working on a project to control a 230V brushed servo motor using cRIO. The engine drives a linear step and the final project needs to create a control of position of the engine that the user is able to enter a speed, position and

Is it possible to syncronise HAVE and readings of CTR? I use a unit of M series and LabVIEW I created a task HAVE several entries with the CTR of a channel that serves as a measure of angular position. It is easy to make a measure of countinous store