1. alerts of virus at startup.

Similar Questions

• Installation of the virus at startup software

  Why install Mcafee always on startup? This blocks my access to the Internet for at least a few minutes.

  You want to go at the start to protect your system - which, in itself, is not the reason why you are having problems of internet access.  It is probably not scans either because they affect internet access for more than a few moments all the more (if any) - even if they may affect the overall responsiveness of your system in general.  It's very probably updates its definitions at startup.  You can and should modify this setting at another time (when you are not using the computer, and it is turned on and connected).  If you turn off your computer at night and put in place to make updates when the machine is turned off, it is possible that since he cannot do it then he does it at the next opportunity (when you start the computer)-then try to take the time with care.  You can change when it only scans so while they happen when you're not usiing the computer if it is possible.  Whenever the download occurs it will probably slow down your connection speed (even if I don't expect to freeze everything - but I don't know how the update process works).

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• What is the importance of the anti-virus at startup

  Hello

  Wat is you advantage antivirus activation in the start menu to the top or it is not better to disable to improve performance at the beginning upward
  .
  Thans
  Johan
   
  Original title: wat is the advantage of allowing anti virus at the start of the section of msconfig

  Hello

   
  Thanks for the reply.
   
  Antivirus analysis computers from virus threats and actively protects more than infection. By default, it starts as soon as you connect to your computer. However, if you want to decrease the time to start your computer, you can consider changing the configuration, Avg starts only when ordered. It may seem more convenient, but in the long run, it exposes your system at greater risk.
   

  Your favorite anti-malware software should always be left in your boot manager. Disabling these programs means that your computer will be more set against the viruses and spyware that circulate on the Internet.

   

  I hope this helps.
   
  Thank you

• Alert to the virus to download the latest version of the bios T430

  Hello

  I get alerts of virus when I want to download the latest bios T430 (2.50) on the Lenovo site. Tried it yesterday and today, but my Avast it keeps blocking for a serious threat. I also noticed that the latest version of the Bios is software not available from Lenovo update and drivers but is available on the Web site.

  Thank you

  Srdjan

  SuperAntiSpyware, Malwarebytes and Iobit Malware Fighter all give this file a certificate of good health. It is good to have other utilities of installed virus control. "... In a multitude of Counselors there is safety. "These are 3 of my favorite programs. If these 3 has not detected a virus and the source of the file is the official download from Lenovo page - a trusted source... then of course Avast has a hyperactive imagination.

• constant anti virus reports when using firefox

  I constantly receive anti alerts of virus using firefox I was not do this with the Explorer, it seems to be related to the "search request". I get this message "windows cannot find"C:\Users\FAMILY-1\App Data\Local\Temp\NEW26A4.tmp.exe". Make sure you typed the name correctly and then try again." After that, I have to go to Bigpond antivirus program that I have on my computer, and the message is "access analysis engine reported a < no name > infection in the file ' C:\USERS\FAMILYPUTER\APPDATA\LOCAL\TEMP\NEW26A4." TMP. EXE' when I logged next to the home of the work I had 350 alerts to get rid of. In addition, someone hacked my hotmail address and sent emails to people on how to make money from home, I had to change my password by e-mail. Any help to stop the alerts would be greatly appreciated.

  Make a check of malware with some scan of malware programs. You need to scan with all programs, because each program detects a different malicious program. Make sure that you update each program to get the latest version of the database prior to scanning.

  • http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
  • http://www.superantispyware.com/ - SuperAntispyware
  • http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
  • http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
  • http://www.lavasoft.com/products/ad_aware_free.php - Ad-Aware Free

  See also 'Spyware on Windows': http://kb.mozillazine.org/Popups_not_blocked and searches are redirected to another site

• Rundll32.exe error at startup.

  The rundll32.exe path does not exist or not a directory.  This is the error message box that I get at the end of the boot.  I click ok and it goes away.  I ran an avast anti virus scan startup and also used a registry cleaner and can't get rid of this message.  Someone at - it ideas?

  Bobbynic,
  Thanks for posting on the Microsoft answers Forum.  This article gives instructions on how to correct the problem you are experiencing. http://support.Microsoft.com/kb/812340 once you have had the time to try it then let us know the results. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error message@Startup C:\Users\Owner\AppData\Local\egaluxocaciris.dll

  Hi all I have an error mesg I get every time I startup or restart my system.  It is this "C:\Users\Owner\AppData\Local\egaluxocaciris.dll" I looked in the event viewer in administrative tools and I can't find anything with this name in the entire chain of information.  We never seen it before.  I did research in the forums and nothing comes up.  Thanks for any help you can give.  Greg

  It's a virus/trojan. It has been removed from your AntiVirus Scanner and registry entries are always present to launch the virus at startup.

  Start regedit.exe and search (F3 or CTRL + F) for egaluxocaciris.dll and remove all the entries that you find.

  André "a programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• Unable to connect to servers to update for my games or anti-virus software

  I was somehow infected with vista antivirus 2010. I followed guides online on how to remove it. It is suggested to enter the registry and remove the stuff out there, but things that he said that I had to delete were not at all there.  I ran Malwarebytes and it seems to have stopped the annoying pop-ups and alerts of virus, but since then I cannot update my MMO games or my anti-virus software. I ended up uninstalling Malwarebytes and download ad-aware and I wasn't able to update ad-aware. I ran it and it eliminated several infections but I can't yet to update my MMO games. Did I miss something and can someone help me please understand this. Thank you

  You are running Microsoft Security Essentials?

  If so:

  Start here - https://support.microsoftsecurityessentials.com/

  and select the link that says - I think my computer is infected - and then select the option of phone support (or by e-mail if the phone is not available for your region)

  Or in English email support: https://consumersecuritysupport.microsoft.com/eform.aspx?productKey=pcsafetymalware&ct=eformts&supportLinkeformts=E-mail

  Otherwise:

  If you are in North America, you can call 866-727-2338 to get infections of virus and spyware. See http://www.microsoft.com/protect/support/default.mspx for more details. For international information, check your subsidiary local Support site.

  -steve

  ~ Microsoft MVP Windows Live ~ Windows Live OneCare | Live Mesh | MS Security Essentials Forums moderator ~.

• NB305-106 - lack of KBCSL.dll

  After a fake intivirus Palladium Pro infection and clean my NB305-106 with Malwarebyte s, the following alert is displayed at startup: "C/user.../Local/KBCSL.dll, the module cannot be found" (translation from the french message). I can't find any reference to this dll on the web.
  This is perhaps a specific dll from Toshiba?

  If anyone can help. Thank you.

  KBCSL.dll doesn't know about me and I didn t find all the details on this file
  I recommend that you clean the BONES and the registry using CCLeaner (its freeware)
  Maybe it help get rid of this message

  Welcome them

• Security Center does not recognize the Windows Security Essentials

  Windows Security Essentials does not seem to register with Security Center.  Security Center reports that no Virus protection is enabled.

  1. I installed Windows XP 32 - bit WGA, activated the product and updated to SP3.

  2 security Center starts giving Windows security alerts for Virus protection, because none has been installed.

  3. I installed McAffee VirusScan.

  4 security Center stopped giving Windows security alerts for Virus protection.

  5. I uninstalled McAffee VirusScan.

  6 security Center has resumed giving Windows security alerts for protection against the viruses as before.

  7. I installed Windows Windows Security Essentials and rebooted.

  8. I tried to uninstall and reinstall Windows Security Essentials with no joy.

  Windows Security Essentials installation did not prevent Windows security alerts.  No Windows Security Essentials registry entry will appear in HKEY_LOCAL_MACHINE/Software/Microsoft/Security Center and monitoring.  If Microsoft consider essential security to be an antivirus product, then how to Windows Security Essentials register with Security Center?

  I understand that this is an information and alert issue only.  I understand that Windows Security Essentials works actually ok.  I am particularly concerned by the reports.  It conditions my deployment of Windows Home Server.  Deactivation of surveillance or the alert is not a solution, just a poor quality work around.

  In a previous thread, the author of this question even abandoned and has not requested additional assistance.  An explanation was given (relevant for Windows 7), but no solution has been offered.  Windows XP has not been addressed.   http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/the-Security-Center-has-not-recorded-an-anti-virus/15ae2383-7ced-4850-A863-f7eb8cc90ee5

  I had the same problem for a while now (I'm on xp) and have searched the Internet for a solution but found nothing at the moment.

• How can I get rid of a pop-up - found Sttray.Exe-entry point

  When I start my computer, I get the following pop up: Sttray.Exe entry point not found. The procedure entry point locate string could not be located in the dynamic link library stlang.dll. Please how can I get rid of this pop up, and what it means? Thank you. PS my computer is a Dell Inspiron 9400, and I run Windows XP.

  Hi Lewisday,

  I do not think it is a virus problem or infection - this is a notice of failed to start, not a type of infection of popup.  I think you have a problem with loading the Sigmatel Audio driver.  Go to Device Manager and check to see if it shows problems with the driver.  Go to control panel / sound and make sure you can configure everything you should be able to do it - if it is not charging I expect you have some type of audio issue.

  Here is the info on sttray.exe: http://www.what-is-exe.com/filenames/sttray-exe.html.

  I also have the chance to have a Dell 9400/E1705 laptop and this applies to the Sigmatel Audio driver.  You should check your Dell Service tag number, but will probably end up here: http://www.dell.com/support/drivers/us/en/19/DriverDetails/DriverFileFormats?DriverId=NN9X1&FileId=2940571307&productCode=inspiron-9400&urlProductCode=False.

  It runs at startup for me.  It seems that you are having problems with the driver.  I recommend that you download and update the driver on the system and restart and who may well solve your problem.  You would therefore, by using Device Manager.

  Without it, you can have problems with your sound (maybe not completely - but maybe in terms of getting the best quality).  I've never tried without it and I have mine set to update for Vista now.

  If you do not want to see what happens if you don't just run this application at startup (which will remove the popup as well) and since it is more likely is not already running anyway and yet you don't mention sound problems (maybe you do not just use anything but computers audio base that maybe does not need - I'm not sure) , you can go to start / run and type msconfig.exe, and then enter.  Go to the faucet of startup and uncheck the box next to Sigmatel or sttray.exe, save the changes and reboot.  I bet that the notice has disappeared-, but did you notice changes to your audio files?  If this is not the case, then perhaps you can live without it if the above has not resolved things.

  In any event it is not a virus, removing startup thing will remove the popup and update the driver may solve the problem and allow the feature to stay (if you notice or care).

  I hope this helps.

  Good luck!

  Kosh

• portable hard drive error message

  I have a HP Pavilion dv6-6150us Entertainment PC.     Windows 7

  Yesterday, a message appeared during the download of the County land cards:

  "Windows has detected a hard disk problem.

  The following hard disks are fault condition:

  Hitachi HTS547575A9E384

  VolumeC:\D:\F:

  Message continues to appear; hard drive failure alert is displayed at startup.

  Looking for suggestions for a compatible hard drive replacement... one that will last more than 2 years.

  Want to know what I can get... and what to avoid.

  Thank you

  Hello:

  I'd get a WD Scorpio Black... 5 years warranty

  7 200 RPM will provide better search sometimes 5 400 rpm stock your drive came with.

  There may be a slight reduction in the battery life between charges on what you currently feel.

  http://www.Newegg.com/product/product.aspx?item=9SIA2W014M8026

  If you cannot live with that, then I'd recommend this one... guaranteed 2 years.

  http://www.Newegg.com/product/product.aspx?item=N82E16822236497

• How to keep your computer in mode 'sleep'

  You want to put the computer in standby mode during the night.  Click sleep with only stay menu but will start in the mode "sleep" for a minute or so and then comes back on.  Why?  How do I so he could sleep till 02:00 anti-virus at startup?

  Hello

  You are not interested more trying to get your PC in mode 'sleep'?

  Try to get the information that I requested and also try this.

  1. click on start.
  2. click on Control Panel
  3. click on Click System
  4. click on Device Manager.
  5. click on the plus sign on NICs droping it down and right-click your network controller, click Properties.
  6. go in the tab power management, uncheck "allow this device to wake the computer".

  Do the same for the mouse and keyboard as well...

  Report if it helped to solve the problem!

  Thank you

• live streaming of media speed is very slow

  I have a teenager, when my teenager going to a popular gaming site, my computer slows down. I managed to fix it but, as a teenager, re-entered in the site it happened again. At least, I suspect this is the cause. Media and audio (mp3) are never to load and sometimes just expire. I cleaned the registry, clean disk, defrgged, spy and virus analyses, startup changed, all that I have the good sense to do without success. Does anyone have an answer?

  Hi Nicolioette,

  • That is the site of games your teen accesses to play games?
  • You try to read the media and audio online or is it through CD / DVD?
  • What is the program you use to read the media and audio?
  • It slows down the operation of any computer or it slows Internet?

  When you visit the site of games he would invite, allows you to install add-ons and ActiveX modules controls and some ActiveX may contain torjan virus or spyware. This can slow down the performance of the computer and the Internet. You can follow the steps below and check if that helps you solve the problem.

  Step 1

  I suggest you to reset the configuration of Internet Explorer on your computer and check if it helps. Access the link below to learn more on how to settings reset Internet Explorer: http://support.microsoft.com/kb/936213

  Step 2

  You can also run a scan for viruses online from the link below to check if your computer is infected with viruses or spyware. If you find files infected, try to remove it and check the performance.

  http://safety.live.com

  Step 3

  Access the link below and follow the steps described in the article, and check if that helps you improve your computer's performance

  http://windows.microsoft.com/en-us/windows7/Ways-to-improve-your-computers-performance.

  I hope this helps. Let us know the results.

  Thank you and best regards,

   

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows crashing

  Edit: After letting it sit on the login screen for around 30 to 60 minutes, it froze... nothing was found a hard drive disk check.

  I'm having a problem where my computer is blue screening or otherwise it becomes unresponsive and freezes.  I tried to update the video drivers and printer drivers that I noticed what is happening all when trying to print.  After updated printer drivers and video drivers, nothing has changed.  I can start the computer, and then on foot and it will freeze.  I analyzed a discharge, and I still don't know what is happening.  I did a test of memory, the virus scan (both then under windows and also a virus scan startup disk) nothing works.  Here's the windebug analyze exit - v.  Any input would be helpful, thanks.

  Use! analyze - v to obtain detailed debugging information.

  Bugcheck A, {fffffa7ffffffe60, 2, 1, fffff80002e43191}

  Probably caused by: memory_corruption (nt! MmZeroPageThread + 3 c 4)

  Follow-up: MachineOwner
  ---------

  0: kd >! analyze - v
  *******************************************************************************
  *                                                                             *
  * Bugcheck analysis *.
  *                                                                             *
  *******************************************************************************

  IRQL_NOT_LESS_OR_EQUAL (a)
  An attempt was made to access an address pageable (or completely invalid) to a
  application interrupt level (IRQL) that is too high.  It is usually
  caused by drivers using a wrong address.
  If a kernel debugger is available, download the stack trace.
  Arguments:
  Arg1: fffffa7ffffffe60, memory referenced
  Arg2: 0000000000000002, IRQL
  Arg3: 0000000000000001, bit field:
  bit 0: value 0 = read operation, 1 = write operation
  bit 3: value 0 = not an enforcement operation, 1 = performance operation (only on chips that support this level of State)
  Arg4: fffff80002e43191, address memory

  Debugging information:
  ------------------

  DUMP_CLASS: 1

  DUMP_QUALIFIER: 401

  BUILD_VERSION_STRING: 7601.23418.amd64fre.win7sp1_ldr.160408 - 2045

  SYSTEM_PRODUCT_NAME: Power O.E.M.

  SYSTEM_SKU: Power O.E.M.

  SYSTEM_VERSION: Power O.E.M.

  BIOS_VENDOR: American Megatrends Inc.

  BIOS_VERSION: P1.50

  BIOS_DATE: 10/02/2013

  BASEBOARD_MANUFACTURER: ASRock

  BASEBOARD_PRODUCT: 970 Pro3 R2.0

  BASEBOARD_VERSION:

  DUMP_TYPE: 1

  BUGCHECK_P1: fffffa7ffffffe60

  BUGCHECK_P2: 2

  BUGCHECK_P3: 1

  BUGCHECK_P4: fffff80002e43191

  WRITE_ADDRESS: fffffa7ffffffe60

  CURRENT_IRQL: 2

  FAULTING_IP:
  NT! MmZeroPageThread + 3 c 4
  fffff800'02e43191 f0410fba6d1000 lock bts dword ptr [r13 + 10 h], 0

  CPU_COUNT: 6

  CPU_MHZ: eb2

  CPU_VENDOR: AuthenticAMD

  CPU_FAMILY: 15

  CPU_MODEL: 2

  CPU_STEPPING: 0

  DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT

  BUGCHECK_STR: 0XA

  Nom_processus: System

  ANALYSIS_SESSION_HOST: ENGINEERLAPTOP

  ANALYSIS_SESSION_TIME: 09/08/2016 13:05:48.0976

  ANALYSIS_VERSION: 10.0.14321.1024 amd64fre

  TRAP_FRAME: fffff880009a9940-(.trap 0xfffff880009a9940)
  NOTE: The frame trap does contain not all registers.
  Some registry values can be set to zero or incorrect.
  Rax = 00000000000000d 2 = 0000000000000000 rcx = 0000000000000000 rbx
  RDX = 0000000000000000 rsi = 0000000000000000 rdi = 0000000000000000
  RIP = fffff80002e43191 rsp = fffff880009a9ad0 rbp = 00000000000000ff
  R8 = 0000000000000000 r9 = 0000058000000000 r10 = 0000000000000002
  R11 = d 000000000000000 r12 = 0000000000000000 r13 = 0000000000000000
  R14 = 0000000000000000 r15 = 0000000000000000
  iopl = 0 nv up ei ng nz na po nc
  NT! MmZeroPageThread + 0x3c4:
  fffff800'02e43191 f0410fba6d1000 lock bts dword ptr [r13 + 10 h], 0'00000010 = ds:00000000?
  Reset the default scope

  LAST_CONTROL_TRANSFER: from fffff80002e7d9a9 to fffff80002e7e400

  STACK_TEXT:
  fffff880 '009a97f8 fffff800' 02e7d9a9: 00000000' 0000000 a fffffa7f ' fffffe60 00000000'00000002 00000000'00000001: nt! KeBugCheckEx
  fffff880 '009-9800 fffff800' 02e7c620: 00000000'00000000 00000000'00000000 00000000'00000000 ffffffff'fffffff7: nt! KiBugCheckDispatch + 0 x 69
  fffff880 '009-9940 fffff800' 02e43191: fffffa80 '06bd2800 00000000' 00000000'00000000 00000000'00000000 000000ff: nt! KiPageFault + 0 x 260
  fffff880 '009a9ad0 fffff800' 03116bc6: fffffa80'06cf7430 00000000 00000080' fffffa80 '06cf79c0 fffff800' 02e70699: nt! MmZeroPageThread + 0x3c4
  fffff880 '009a9c00 fffff800' 02e706a6: fffff800 ' 02ffde80 fffffa80 '06cf7430 fffff800' 0300bcc0 65676e6f ' 4c646e69: nt! PspSystemThreadStartup + 0x5a
  fffff880'009a9c40 00000000' 00000000: fffff880'009aa000 fffff880 '009-4000 fffff880' 009a 9870 00000000 00000000': nt! KxStartSystemThread + 0x16

  STACK_COMMAND: kb

  THREAD_SHA1_HASH_MOD_FUNC: 5c484ee9f5c3f42d49a2ebf5df37e00bb9d76ddb

  THREAD_SHA1_HASH_MOD_FUNC_OFFSET: d85c22c77a1557d5e012e7d02568dbec859624ad

  THREAD_SHA1_HASH_MOD: ee8fcf1fb60cb6e3e2f60ddbed2ec02b5748a693

  FOLLOWUP_IP:
  NT! MmZeroPageThread + 3 c 4
  fffff800'02e43191 f0410fba6d1000 lock bts dword ptr [r13 + 10 h], 0

  FAULT_INSTR_CODE: ba0f41f0

  SYMBOL_STACK_INDEX: 3

  SYMBOL_NAME: nt! MmZeroPageThread + 3 c 4

  FOLLOWUP_NAME: MachineOwner

  MODULE_NAME: nt

  DEBUG_FLR_IMAGE_TIMESTAMP: 5708972e

  IMAGE_VERSION: 6.1.7601.23418

  Nom_image: memory_corruption

  FAILURE_BUCKET_ID: X64_0xA_nt! MmZeroPageThread + 3 c 4

  BUCKET_ID: X64_0xA_nt! MmZeroPageThread + 3 c 4

  PRIMARY_PROBLEM_CLASS: X64_0xA_nt! MmZeroPageThread + 3 c 4

  TARGET_TIME: 2016-08 - 05T 15: 48:09.000Z

  OSBUILD: 7601

  OSSERVICEPACK: 1000

  SERVICEPACK_NUMBER: 0

  OS_REVISION: 0

  SUITE_MASK: 272

  PRODUCT_TYPE: 1

  OSPLATFORM_TYPE: x 64

  OSNAME: Windows 7

  OSEDITION: Windows 7 Windows NT (Service Pack 1) TerminalServer SingleUserTS

  OS_LOCALE:

  USER_LCID: 0

  OSBUILD_TIMESTAMP: 2016-04-09 01:46:22

  BUILDDATESTAMP_STR: 160408-2045

  BUILDLAB_STR: win7sp1_ldr

  BUILDOSVER_STR: 6.1.7601.23418.amd64fre.win7sp1_ldr.160408 - 2045

  ANALYSIS_SESSION_ELAPSED_TIME: b8f

  ANALYSIS_SOURCE: KM

  FAILURE_ID_HASH_STRING: km:x64_0xa_nt! mmzeropagethread + 3 c 4

  FAILURE_ID_HASH: {533750e9-5419-7239-09ad-35bf22c02726}

  Follow-up: MachineOwner
  ---------

  No complete memory dump in your link.

  BSOD is always a combination of things.  The problematic machine can have different software or drivers.  SYmantec has been questioned explicitly in 2 accidents and it is not the current version