5530: 5530 win 10

Similar Questions

• HP ENVY 5530: HP ENVY 5530 print NOT in win 8.1

  Is it a good solution for the bottom yet? This happened for months and still no solution. I bought this printer 4 days here were many of online recommendations, but these have been overshadowed by the below:

  New printer wireless HP ENVY 5530 bought 2 days ago. Does NOT print a single document in Windows 8 or 8.1. It's scanning perfectly, I can also print from my HP eprint App Android perfectly. The printer is showing as connected and working properly (as evidenced by the ability to print from the device).

  The printer accused that I try to print a Word, the message printer box doc, when clicked, shows me the document sent to the printer, and yet it sits there for about 3-4 seconds then... DISAPPEARS and no document comes out of the printer.

  I tried all bugs below:

  LEVEL 1:
  Uninstall the printer software

  • Rename the HPBXPSRENDER. DLL to HPBXPSRENDER. OLD, (located in C:\Windows\System32\spool\drivers\x64\3 for 64-bit and C:\Windows\System32\spool\drivers\w32x86\3 for 32-bit)
  • Reinstall the printer software

  Result: FAIL - there is NO HPBXPSRENDER. DLL

  LEVEL 2:

  • Unplug everything, leave for 60 seconds, plug back in

  Result: FAILURE

  LEVEL 3:

  • Disable firewall

  Result: FAILURE

  Hey @Aaaaaahhhhhhhhh,

  Thanks for getting back to me on this subject. At this point I'll have to charge you another driver on your Windows computer to fix this. Can I please you follow the steps below.

  1. Open the screen, Start by selecting the Windows icon at the bottom left of your computer screen or by selecting the Windows key bottom left of your keyboard to the right of the Ctrl key
  2. On the start screen, type devices and printers. Click on devices and printers to the start
  3. Under devices and Printers window right-click on your HP Envy
  4. Left click on printer properties
  5. Click the Advanced tab
  6. Click new driver
  7. When the new window driver opens just hit "Next" until you see a list of manufacturers and Printers
  8. Select the manufacturer HP
  9. Select the Deskjet 6980 printer. If the Deskjet 6980 does not appear in the list of available printers, select "Windows Update" on the bottom. Once the update is completed, you will be able to select the Deskjet 6980
  10. After you select the Deskjet 6980 hit "Next" to complete the wizard again pilot
  11. Under the printer properties window, select apply but do not hit OK
  12. Select the general tab
  13. Rename your printer to the HP Envy 5530
  14. Click OK
  15. Right click on your HP Envy , one more time, and left-click on Printing Preferences
  16. Click the paper/quality tab
  17. Click on the drop down menu 'Normal' for the print quality on the bottom right and change that to "Normal Fast"
  18. Click apply and then click OK to save the changes
  19. Close Devices and printers

  Now that the other pilot has been successfully added to please test print to see if the problem is now resolved.

  Please let me know if this procedure works for you. Good luck!

• Want 5530: Printer print suddenly not not on Win 7

  Set - up to print wirelessly, I had a race with this model until recently of dream & I don't remember any event that affects all of a sudden it.

  My wife's cell phone is not affected & print very well.

  HP Diagnostics initially sorted a shift of the port but after a fix - up it still will not print.

  Leads to later diagnoses have concocted with nothing wrong.

  Have uninstalled and re-installed the relentless software number pilot many times without success.

  Strange thing is the 'internal test print' function works fine but actual print is not?

  Go figure, she does this wireless network... I don't understand?

  I temporarily turned off the Norton firewall but nothing helped.

  At my wits end with this one...

  Any help or advice would be appreciated.

  Thank you.

  Hi VinnieF,

  You're welcome and thank you for your answer!

  If the printer can print from your Android smartphone, then you are correct, that the problem is with the laptop running Windows 7.

  As an another possible workaround, let's try to assign another driver, following the instructions in this post How to assign drivers to Print in different Versions of Windows, by @Shane_R.

  Do not forget to return to this topic and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  We'll see what happens!

• HP ProBook s 4430: hp envy 5530 e - all - in - one printer prints not after windows 10

  I got Win 10 installed for a few months and have just tried to print with my HP Envy 5530 e printer. I tried a doc in Word and he showed that he was priinting, but he vanished from the queue after about 15 seconds.

  -C' is my default printer and displays "series HP Envy 5530 (network).

  -my wifi is connected

  -J' tried to unplug machine and wall & turn off wifi

  -J' tried troubleshooting, but he could not identify a problem

  -J' tried to update.

  -J' uninstalled and reinstalled with disc and I have uninstalled and reinstalled online

  -Print and scan doctor = all OK

  -Test print = print and submitted, but disappears after seconds too

  -internal print has no print

  -disabled firewall only = no print.

  What Miss me? I've never had a problem with Win 7.

  Hi rb101,

  Your suggestion to contact our assistance worked!  I had a conversation with someone, and they changed my driver to a generic driver and that's...

  Thanks a lot for all your help

• HP Envy 5530: HP Envy 5530 told to replace the color cartridge, even after replacing with a new one.

  HP Envy 5530 said to replace the color cartridge, even after replacing with a new one.  Printer is 1 year old and I replaced the cartridges several times over the past year.  I am enrolled in the program of HP ink.  I can run the printer mode single cartridge using a black ink only and it works with my pc XP, Ipad, Chrome pc and mobile phone.  My pc win 8.1 will not print anything other than a test page.  Printer on the pc file lists always attention required when you try to print from the pc win 8.1.  I believe that the problem may be related to surface of cartridge for printing inside the HP envy heads 5530.  This part is available for purchase, and if so, where?

  I found a work around.  On the pc win 8.1, it seems that the print request must see a reset of the HP envy 5530 to print mode single cartridge.  I just start the pc and then reset the printer by lifting the hatch for the print heads.  That's all.  Once this is done, the 'attention required' message goes to the loan and it is able to print.  It will open a window, which suggests you add the color cartridge, but it will disappear when printing.  Simply open the door once and you can print until you turn off the pc.

• HP Envy 5530 leaving streaks when printing

  Wen the use HP desk top it with Win 7 and HP Envy 5530 printer all-in-one sound suddenly started leaving small streaks on my printed pages.  How can I fix it?

  Are the dark streaks WISPs in the areas which should be light, or light streaks in areas that should be dark?  The document here can help solve the problem.

• HP 5530

  I have a 5530 and when I go to print several pages, the printer stops after two or three pages.  I deleted the printer and re-installed several times and get the same problem.  With the help of Win 8.1

  Hello
  Try following the steps below and check if this can help:
  -Open the HP software by clicking on the HP Envy 5530 icon in the desktop or the Start Menu, and then click on the link to the Home Page of the printer (EWS).
  -Click on the network tab.
  -According to the model of your printer, click Network, click Network (IP) address or click IPv4 in the active network connection type.
  -Manuel IP-click and then click on suggest a manual IP address. An IP address manually, the subnet mask and default gateway shows.
  * Be sure to take note of the IP address and confirm the changes, and then close the EWS page.
  -Click the HP Envy 5530 icon on the desktop or the Start Menu and click the utilities tab, and then click Update IP address.
  -Type the IP address that is configured manually, click on save and confirm.
  -Open the control panel and go to devices and printers.
  -Right click on the HP Envy 5530 icon and select printer properties.
  -Open the Ports tab.
  -Click on the button Add Port, select Standard TCP/IP and click New Port.
  -Follow the procedure by typing the IP address that is configured manually and confirm the changes.

  Now try printing and check if the problem solved.

  Kind regards
  Shlomi

• Want to 5530 failed to update 08/04/2014

  After update (?) the 5530 "2014-04-08" envy, Version32.2, 110.49 M many problems have arisen.

  #1-can't scan or from the computer (via USB or NET) - can scan to SD card.

  #2 when you are trying to solve this problem, the following error message appears:

  "The comprehensive software solution is not installed on this computer.

  Click - 'install software' - watch download - then "download failed".

  Other info: "print and scan the doctor 4.3" does not work.

  Several attempts to repair or uninstall and reinstall the software failed.

  Message: ' PROPSYS.dll is not designed to run Windows or.

  It contains an error"arose from time to time.

  FYI - the basic features of printer worked fine for months without incident.

  Instant access to the web ink still - works but not the computer.

  Computer system: WIN 7 (64)

  Help, please.

  28/09/2013

  This user has the same basic problem: "ENVY 5530 All in One not founf when you try to scan from Printer Wizard."

  -No solution listed in Blog.

  Thank you for this answer.

  Yes, it seems that you receive two error messages when you attempt to install the 5530 like software. I would like to start off the power using this tool called Microsoft Fix it, which will fix all the problems that programs cannot be installed or uninstalled: (this information is shown here.)

   

• HP Envy 5530 e-all-in-one: copy/scanning does not work

  All the functions of the printer/scanner worked before Windows upgrade Windows 7 10.  After 'upgrade' to win 10, scanner and copier functions are kaput.

  SYMPTOMS:

  Printer funtion still works

  * Copy funtion indicates "" Now"copy" but never active scanner.  Pressing Cancel does not stop the process.

  * Manual SHUT DOWN does not work with constant "Shutting Down" message.

  * Scan to the computer and scanning to E-mail functions do not work

  * Try to run Windows scan "does not recognize the HP profile" and cannot scan using Windows 10

  ACTIONS:

  * Initially received 'C4EBA230' message on the printer screen blue with flashing icons, but a hard reset solved error

  * Have completely uninstalled & reinstalled software base three or four times of HP and HP update disc once software has detected and installed

  * Ran HP, utility for troubleshooting several times before and after reinstalls for problems of scan - driver detected every time problem.   Ignore the results of audit of pilot and proceed to the verification of scan did not work

  * Performed four resets hard to return to the firmware with parameters.

  * Tried scanning HP and Capture app (Nope - message "Device is busy" - same device is not)

  * Voltage checked the cable power and the wall outlet (OK)

  * Checked ink levels (more than one half full)

  * Searched updates firmware (not available on HP support site for want 5530)

  Seems to me that it might be mutiple problems/possible solutions:

  Machine firmware problem?  n ' any means to reinstall the current firmware via a download?

  Mechanical scanner problem? -scanner engine bad/blown bulb? -where is the nearest HP Service Center authorized Texas?

  New driver development necessary to scan to computer compatibility with Windows 10? -C' you all of the problem

  Your diagnosis?

  Hi doktor,.

• HP Envy 5530: I replaced the black cartridge in my printer. She refuses to print in black only now.

  I ran all the standard tests. Black printing will produce only on cartridge color if used singularly. Print heads have been cleaned. Printer has updated its auto preset and no analysis of a printed item will be printed nor will be a printed document or the other. All prints have tried so far were in black ink. All worked perfectly until the change of the ink cartridge. Replacement cartridge used was a standard 301 HP black cartridge.

  Try here.

  http://support.HP.com/us-en/product/HP-envy-5530-e-all-in-one-printer-series/5304881/model/5304882/document/c03765731/

  Let us know.

• HP Envy 5530: HP Envy 5530 truncates (chops) image of Snip and Snipping Tool Windows 10, Word 2007

  Hello. My HP Envy 5530 newly purchased printer truncates images captured from Snip, Snipping Tool and screen printing. Image appears perfectly when placed in MS Word, PowerPoint, MS-Paint, etc., however, when printing on the 5530 want appears the image enlarged, as well as 30% or more of the image gets truncated or cut off.  I have tried other "resolutions" posted, but they do not work. I wasn't able to find a driver for the HP 9800, as suggested in another post (HP says it is not available). Everything worked before installing this HP 5530 (I used Lexmark printer). I am on Windows (to date) 10 MS Office 2007 and reinstalled Snip & Snipping Tool. I uninstalled and reinstalled the HP 5530 and I ran the Scan Doctor utility that will return no error found. Does anyone have a similar problem and especially a solution?

  @PoloChrome

  With no idea what you have tried (other "resolutions"), I offer the following to your attention:

  • Ensure your PDF viewer / reader software is on the latest version available for your operating system.  This is not negligible.  Create a Restore Point before the update / modify the software system yiour.
  • Never use copy - paste when you add images to your document (Word) > use Insert
  • Control image format when you change the size of the inserted picture
  • Consider "line spacing" when you insert a picture into the document using "tight" / options "Wrap Text".
  • Keep the image within the borders of the minimum margin - if all else fails, change the margins in "Close" to give more images of space
  • Consider that Office Word 2007 cannot respond to Windows 10 as expected
  • Make sure that you allow updates include patches Office 2007 available (assuming these are available)

  Help, suggestions and examples:

  Manage the print with preview output before printing

  Sections - various, including:

  • Preparation

  • Microsoft Office Word - Options, tips, Observations

    • Images of Word / Art / words are chopped
  • Adobe Reader DC
  • Adobe Flash

  When you see a post that will help you,

  Who inspires you, gives a cool idea,

  Or you learn something new.

  Click the 'Thumbs Up' on this post.

  My answer-click accept as Solution to help others find answers.

• Print from 3rd generation iPad without internet HP Envy 4500 or 5530 or?

  I'm trying to help a friend who is a senior and has no computer or ISP.  She will receive an iPad tomorrow 3rd generation that is wifi and cellular.  I'm trying to minimize its costs and to believe that she can manage with just cellular data for email little and surfing, she must do to keep in touch with his doctors due to health problems.  She tells me that she wants to be able to print.  With no wifi and no ISP (at least to start) and no way to connect an iPad to a printer with a cable, I searched for a way to print.

  I came across a YouTube video where the guy he says he can print with certain HP printers on your iPad or your iPhone when in a vehicle and away from any wifi.  It calls the function in some printers HP called "direct print".  He referred to HP 5520.  I'm looking at HP 4500 or HP 5530.  I can't find references to "direct print".  Is there another name?  I read in the Forums of Apple that the Envy of printers range are capable of a direct impression of iPhones and iPads.  Is this true?

  Then, before I have buy for my friend, I need to know if it is possible what I want to achieve.  She will be able to print directly to one of these printers (or anyone) by selecting it in the wifi network offers?

  I tried to read the info on the HP website and there are references to send documents to the printer via a kind of HP Server, and even if this can work, it sounds more heavy for her.  She is a total newbie to computer and although I'm not, I have to be able to go home and raise his iPad and running and I want to give him a way to print.

  It goes without saying that what she need is a printer/copier basic and inexpensive, and I'm hoping to get one for around $100...

  Thank you!

  Hi there and welcome to the forum. The feature you are referring is called "Live wireless" and want 4500 both want 5530 have this feature. When a printer has a wireless direct printing capability means your WiFi (smartphone, Tablet, laptop) compatible devices can connect directly to your printer wireless network without using a wireless router or access point. This sounds like it would work perfectly in the case of your friend who has currently no ISP. Here is a link to a web page that says wireless direct printing in more detail http://www.hp.com/global/us/en/wireless/wireless-direct.html

  I hope this information is useful and feel free to post on the Forum with other issues.

  Best.

• HP Envy 5530 always offline

  I have problems with my printer again (2 months) HP Envy 5530. It is always appear as "offline". I cycled power on the printer and confirmed that it is connected to my wireless router. I checked for the latest downloads for your printer and am up to date. I confirmed that the printer is the default printer and can see printing via the control panel.

  I use a Windows 8.1 machine.

  Pages that I am trying to print are .pdf, but even just test HP page is found in the queue - not able to print because I can't get the printer on line

  Any advice for how to get printer back online?

  Hi @Tim-yellowcrocs

  I want to help you with your new printer Envy. Please use the following document to solve the problem; "Printer is off-line" Message appears on the computer and the printer will not print: Windows 8.

  If the problem persists, let me know and we can go from there. Thanks for your time and your efforts. If you prefer to talk to a living person, we invite you to call HP.  If you are in the Canada, U.S. dial 800-474-6836 or you can Contact HP worldwide.

  HP printers usually have a warranty of 1 year from the date of purchase, you can check the warranty using the following if you wish; guarantee cheque.

• want to 5530: error: is not installed driver for WSD print device

  I'm trying to install the software on the HP Envy 5530 contect to my Dell Windows 7 Home Enterprise laptop runing.  I have installed and uninstalled. use the web and the installation disk but when I check the printer it shows a warning triangle with an exclamation point (!), which tells me he needs in case of a problem.  I get the error "WSD print device driver is not installed.  Please help me.

  I think I tried your 3 bullets without result.  I tried to print wireless HP Center regions, but I'll start over and focus my efforts in this area by the top.

  Seems not a problem of the printer "not found".  The printer Hp Envy 5530 is listed. but shows an icon indicating the troubleshooting is required.  See this link from dropbox http://1drv.ms/1zODxEY

  Having said that, however, when I try to print your word document, I got a message "no printer installed": http://1drv.ms/1AgOqEE

  Bottom line, it is not resolved yet.  Dang it.

  Thanks for your help.  I persevere and hope to get it resolved.  I will answer when I do.

• Want to 5530:5530 does not print black

  5530 printer worked very well. Black print cartridge ran out of ink. Replace the cartridge-no black printing, single color.  Thought that the replacement could be a dud. Put another in (both HP brand, out of the box). Still no black printing. Has made many attempts cleaning via the screen and computer connected with USB. Nothing. It prints a blackish color when I took out cartridge black - using composite of tri color cartridge.  Removed the cartridge, turn the printer power off, turned back, left overnight, unplugged, ran doctor Scan.  Still no black printing.

  Why this suddenly wouldn't work not afte replace this cartridge?

  Hi @Weaver1953

  Do you receive for example error messages missing cartridge? Try to clean the little electrical contact pads on the back of the ink cartridge and also take a look at where they are sitting in the printer to make sure that nothing has been damaged when you have replaced the cartridge empty. Sometimes if they are not aligned properly it can cause an error of rejection.

  However, if the printer accepts the cartridge and print, but the black ink is just absent, this suggests a problem with the cartridge and not the printer. If this is the case I suggest to get the cartridges to where you bought them or you could try calling the phone support, you can benefit from replacement cartridges. Theres a link below for phone in the world supported by the numbers:

  http://WWW8.HP.com/us/en/contact-HP/WW-contact-us.html

  I hope this helps!