Broken connection Keyring

Similar Questions

• connection Keyring

  I was watching the keychain in Keychain Access logon and there are more than 500 key signature imessage looks demi-prive and half public. My question is - is this normal? I've only used messageing text 10 or so times.

  Hello

  This has come up before.

  It seems that it varies from one person to another, but it is unclear why this is so.

  Basically, it's normal.

  

  20:55 Saturday. August 13, 2016

   iMac 2.5 Ghz i5 2011 (El Capitan)
   G4/1GhzDual MDD (Leopard 10.5.8)
   MacBookPro (Snow Leopard 10.6.8) 2 GB
   Mac OS X (10.6.8).
   iPhone and iPad (2)

• Cannot connect to more than one mail account after the upgrade to Sierra

  I have several provided ISP e-mail accounts that work successfully for a long time on elCapitan.  After the upgrade to Sierra this afternoon cannot connect all accounts and I asks me to enter the password.  Why isn't Sierra pick up the passwords of my trousseau?

  Oddly enough, my Hotmail account seems to be ok.

  How can I fix this without having to re - enter all passwords?

  As a result of the foregoing, I found that my connection Keyring contains entries for all of my email accounts.  However, these dates are back in July 2011.

  After an episode of lost or stolen iphone, I had to update all of my passwords by e-mail in February this year (2016).

  Search in my keychain, I found dated entries for my email accounts in iCloud Keychain section.  I don't think that I never activated iCloud for my email.

  How the entires of e-mail account eventually sub iCloud and why the old entries from email account not updated?

• Accountsd using local products

  I installed Sierra Tuesday.  Since that time when I log in, I have a popup that says accounts wants to use Keychain 'local products '.  No way to stop that and why is he lightweight pop up?

  Thank you

  Hello Monty Trofel,
  Thank you for using communities of Apple Support.

  I understand your message after updating your Mac on macOS Sierra you are now being invited to use Keychain whenever you log in. I recommend to use the steps in the following article to resolve this problem:

  If your Mac keeps asking for the password in the keychain
  

  After you or your administrator Mac resets the password of your OS X user account, your Mac may ask you to update your Keychain password or enter your login Keychain password. He could also tell you the system was unable to unlock your login keychain. It's because your login keychain still use your old password.

  If you do not know your old password, the solution is to create a new login keychain.

  If you know your old password, use this password to update your existing connection Keyring:

  1. Open the Keychain Access application, located in the Utilities folder of the Applications folder.
  2. On the Edit menu, choose "Change password for Keychain 'login'."
  3. Enter the old password of your user account in the current password field. This is the password you were using until the password has been reset.
  4. Enter the new password for your user account password. This is the password that you are using now to connect to your Mac. Enter the same password in the field of verification.
  5. Click OK when finished, then quit Keychain Access.

  Best regards.

• Impossible to use Mac because of boxes appearing – 'com.apple.iCloudHelper.xpc', 'cloudd', 'MessagesAgent', 'represents' with spinning ball

  My MacBook Pro El Capitan has boxes on screen-"com.apple.iCloudHelper.xpc", "cloudd", "MessagesAgent", "accountsd" with the ball spinning and I can't use my computer as these boxes want a 'keyring', and I don't recognize any of this. Help, please. Thank you.

  Hello T.W. Macaroni.

  Welcome to the communities of Apple Support!  Looks like you are having problems connecting to your computer administrator user account.  (A 'Keychain' is a password management system).  Have you recently made changes to your computer (update your operating system, download any software, no password)?  The files above to indicate your computer tries to launch applications like iCloud, Messages, etc.

  The first thing I would say is to restart your computer.  It sounds simple, but it can be a very easy solution.  If this does not work, restart your computer again, but this time hold down the SHIFT key.  It's what we call a safe mode.   If your computer starts in safe mode without these error messages, then restart again in normal mode (without pressing any key).

  Try safe mode if your Mac does not end commissioning

  If none of these two basic troubleshooting steps work, you may need to enter a new password of your login keychain.  Follow the steps in the resource below:

  If your Mac keeps asking for the password in the keychain
  

  After you or your administrator Mac resets the password of your OS X user account, your Mac may ask you to update your Keychain password or enter your login Keychain password. He could also tell you the system was unable to unlock your login keychain. It's because your login keychain still use your old password.

  If you do not know your old password, the solution is to create a new login keychain.

  If you know your old password, use this password to update your existing connection Keyring:

  1. Open the Keychain Access application, located in the Utilities folder of the Applications folder.
  2. On the Edit menu, choose "Change password for Keychain 'login'."
  3. Enter the old password of your user account in the current password field. This is the password you were using until the password has been reset.
  4. Enter the new password for your user account password. This is the password that you are using now to connect to your Mac. Enter the same password in the field of verification.
  5. Click OK when finished, then quit Keychain Access.

  T.W. Macaroni, if you continue to have problems connecting to your computer, please reply to this message and we will study further with you.

  Take care.

• Monitor 'no Signal '.

  Hi all

  My HP Pavilion Elite HPE series desktop computer product # #ABU, model # HPE XS622EA - 590uk is no longer gives a reliable result to my monitor.

  I performed a system restore and then updated to Windows 7 Ultimate from Home Premium in an effort to solve the problem without a bit of luck at each setting.

  I tried two HDMI cables that both use to work between the office and the monitor, the cables still work and of fact so the monitor, I used the HDMI and the monitor cable and connected to my laptop Presario CQ61 to confirm, I also tried using DVI cables with the same results without success.

  On this basis, I believe that the problem is a hardware inside my office, I'll check for any failure, loose or broken connections/electronic cards.

  When the problem occurred firstly I could connect the monitor with a PC cable and pc adapter DVI, the office was more no shortcuts or a menu bar, where the reason I did a system restore, after restoring the system, I was able to use the HDMI cable but the signal on the screen is quickly become intermittent and then nothing It was the same status with the DVI cable, and it was common to the two HDMI and two DVI outputs.

  Just to confirm, that I didn't have problems with the operating system feature, everything starts up fine and I can access all the user accounts, as long as I can see

  Anyone had a similar experience or any idea what parts I should check for this problem.

  Regards and thanks in advance for any help

  Lee

  The first thing that comes to mind for me is the video/smart card.  You have a card or you use an onboard video chip?  If you have a video card, check if you have a fan which may not be spinning.  This chips overheat and cause a failure.  You should also look carefully at the video card and check for capacitors that are bulged/rounded. I would also check for do not have capacitors on the motherboard as well.

• PSC photoSmart 2410 - Vista - a LOT of problems

  Hello - I am trying to help a friend, and I'd like YOUR help!  :-)

  Printer: HP PhotoSmart PSC 2410

  System: Windows Vista (G - help us)

  PROBLEMS:

  1. it seems that since Vista was installed on XP (a year ago) the printer will not print or copy in B & W

  One exception - unit would BE printing when printing from the program of electronic messaging - but nothing else!

  (I ran the printer head cleaning and re-alignments unit and clean the cartridge by hand - it seems in good condition)

  (I got tones of gray when you print the page example of Unity)

  -Could there be a connection with the installation of Vista, as it seems?

  -What else could prevent B & W print and copy on this unit?

  2. the analysis unit also is more - unit printer says to set up the printer on the computer software, but, obviously, it isn't any Vista software for the printer.

  3. my friend tried to reinstall XP drivers - which seems to have wiped out the Vista drivers - when I try to have Vista restores the drivers, it fails to do anything!

  (I unplug the printer, shut down printer, restart Vista, restart the printer, connect printer--> nothing happens.)

  There's something else I should do - why aren't installing Vista drivers?

  -Are there something short of reinstalling Vista, can I do to get generic drivers for Vista working again?

  Y at - THERE * ANY * DRIVER - HP or third-party THAT WILL GET A VISTA SYSTEM WORKING WITH THIS DEVICE?

  Thank you.

  OK - I've had more time to return to the House of my friend today to solve this problem.

  The two main symptoms:

  (1) do not copy

  (2) do not print with the exception of a web browser

  BOTH are down to a bad toner B & W cartridge.

  The thing was fairly new, and the ink was still pretty busy. I had cleaned the heads and ink flowed easily from the cartridge - maybe it was the oxidation of the contacts or broken connectivity.

  The * full * lack of impression after an attempt to install XP drivers was not related to this attempt, but the USB cable on the device after loosening.

  Once the USB cable is properly plugged in and installed a new black cartridge, of the test pages worked, copy worked at B & W color and printing applications worked.

  FINALLY - functions of scanner was enabled using VueScan ($40).

  THUS, in addition to the fax functions (I don't have time too check and that my friend does not use), this of HP PSC Photosmart 2410 is now fully functional.

  Isn't * that that HP get away for failing to update the drivers for units like this - they still let us lower notes in this regard, for this unit.

  Thanks to those who tried to help!

• My old iphone 6s is completely broken, it does not or registry that it is connected when plugged into a computer. I'm able to recover photos from the SIM card with an adapter USB SIM card or through any other way?

  My old iphone 6s is completely broken, it does not or registry that it is connected when plugged into a computer. I'm able to recover photos from the SIM card with an adapter USB SIM card or through any other way? I also do not save anything with AllAccess, icloud, or through my computer as you would with a digital camera.

  The photos are not stored on the sims, sorry.

  You can always try the Recovery Mode, little to lose at this point. If it doesn't, I suggest taking it to an Apple Store for testing.

  Recovery mode:

  Turn off your iOS device.

  Plug charge cable to the computer only (not to the device yet).

  Open iTunes on your computer.

  Hold the button to power on your device and do not let go.

  Plug the cable into the device while keeping the power button.

  Wait for the computer to detect the device and wait that he eat.

  Restore as New first, then restore sauvegardΘ if you wish.

  https://support.Apple.com/en-us/HT201263

• Database connectivity broken vi Toolkit

  Hi all

  I upgraded from LV 8.5 to 8.6 (windows XP platform) a couple of weeks and have had no problems until today when all of sudden my vi toolkit database is coming from broken, with: "one or more of the inputs needed for this function are not wired or are wired incorrectly. Display the context-sensitive Help window to see what should be the connections to this function. ' Mistakes however is not the case on all my vi using the objects in the Toolbox.

  Measures taken so far without success:

  1 mass compilation of my vi

  2 mass compilation of database Toolbox

  3 re install Database Resource Kit

  4 mass compile the directory vi.lib

  5 in the old knowladge base article Document ID: 2RO7J544, assured the latest microsoft MDAC is installed.

  Any help is appreciated as we use this receptive toolkit.

  Thank you

  Chris

  PLATES

  Hi Chris,

  Thanks for the reply and I hope that your well.

  I need to try to understand something, when you say that the LabVIEW 8.6 upgrade have you improved the Toolbox?

  Toolkit LabVIEW Database Connectivity 1.0.2 is for LabVIEW 8.6. If, on the other hand your trying to use LabVIEW 8.6 with DC Toolkit 1.0.1 so I think that they are not officially compatible. However, these links may be of interest knowledge base: (after all, they are just screws). However, to say this - if you read the Readme for the new toolkit, that many things have changed for LabVIEW 8.6 - so becareful.

  You will have to manually copy all the files in one version of LabVIEW to another. Use the following instructions to achieve:

  1. Install the database connectivity toolset to the version of LabVIEW, say X.
  2. Copy the following files/directories in the directories right in the latest version of LabVIEW, say Y.
     • Copy the data directory from \LabVIEW X\vi.lib\addons\ to \LabVIEW Y\vi.lib\addons\
     • Copy the file database.llb \LabVIEW X\project\ to \LabVIEW Y\project\
     • Copy the data directory from \LabVIEW X\examples\ to \LabVIEW Y\examples\

  OR also check this,

  Installation of toolkits for use with several Versions of LabVIEW:

  http://digital.NI.com/public.nsf/allkb/58BE852CB35237C786256A290079DF39?OpenDocument

  Other questions that you may have encountered,

  Database connectivity tools claims are a polymorphic Subvi Broken

  http://digital.NI.com/public.nsf/allkb/0FA97221637E74CA86256C7C005069A5?OpenDocument

  "Update to the latest MDAC will solve this problem."

  I would also check that you have installed the Toolkit for LabVIEW 8.6 - toolkits are now specific for labVIEW 8.6. Then maybe try to reinstall and the Toolbox for LV8.6.

  Hope this helps and please let me know (Please specify a little more).

• My acer aspire 5050, pin power connection is broken, what is my options?

  The power cable to operate or recharge this phone cannot be used as the PIN inside the connector that connects the cable is broken. What are my options? This device is an Acer Aspire 5050 series, type of laptop. Thank you

  send it back to acer for the service

  but they will charge out-of-warranty fees

• my connection has always been private and secure, and time and time again this comment spam has somehow broken over and over again in my system and connected to my internet.

  I have my laptop set in place for wireless internet, and had no problems so far. I have a search United Nations guest house living in my house and somehow there manipualted my system (this is what the tech told me that wanted me to pay 125.00 to fix my problems) my connection has always been private and secure, and many and many times this comment spam has somehow broken over and over again in my system and connected to my internet. now, I was looking around and tried to change my settings in the section home group (remember I do not have a residential group set up and never had one) but now I just noticed that somehow this * hole entered my network and set up a homegroup to Siena with password. to top it all off I have went and tried to change the settings for which patients to share with people on my network... and it would allow me to change anything due to accsess denied! He said that I need her password for accsess homepage settings because it has somhow a administrative accsess to eerything on my pc. How can it be a. admin on my network when there is one that is done over the internet through my computer? Please help me. I am sssooo totally lost as to how to do locked out everyto with my computer, I don't want him to have access to anything annnyyyy! PLEASE HELP ME IF SOMEONE HAS ANY INFO THAT CAN HELP ME... Thank you

  If you are not in the residential group, they have no access to your computer. I recommend also define your network as hidden. That way if they do not know what you called, they have not all hope to connect. (Unless they are very good at hacking)

• my monitor is broken on my laptop and I connected an additional monitor. How can I get the extra monitor to work while not in safe mode?

  Someone hit my monitor and broke. I connected a regular monitor, but will only work in safe mode. How can I disable the broken screen so that I can use my laptop?

  Hi, try the normal mod F1, F4 or F5 Fn (function) button for the track changes and change the default monitor.

  Safe mode, select monitors in Control Panel.

• The connection between your cable modem, router or access point, and Internet are broken.

  What is the average message "the connection between your cable modum, router or access point, and internet are broken" and how to fix it?  We use internet provider time warner.  Can I access online using mini jetpack, but not through time warner.  Is the problem with our internet service or hardware problem?

  Hello Terri,

  Thanks for posting your question on the Microsoft community.

  Thank you for details on the issue.

  This problem may occur because of damaged or incorrect network settings.

  I would suggest trying the following methods and check if it helps.

  Method 1:
  Run the network troubleshooting and check.
  Reference:
  Using the troubleshooter from network in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  Note: You can run utilities times 'Internet connection' and 'network card'.

  If this does not help, use method 2.

  Method 2:
  Reset TCP/IP and check the issue.
  Refer to this article:
  How to reset TCP/IP using the NetShell utility
  https://support.Microsoft.com/en-us/KB/299357

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• How can I check if the connection is broken?

  Hi, how can I check if the connection is broken?

  such a code:

  try{
  
  SocketConnection _s = (SocketConnection)Connector.open(address);
  
  }catch(Exception e){}
  

  will return me an exception when I can't connect. But what happens if I am connected to the server for a few minutes and after that something happens that break the connection? How I check that?

  Kind regards

  The following links can help you:

  http://thiamteck.blogspot.com/2008/10/Java-check-if-socket-connection-broken.html

  http://www.velocityreviews.com/forums/t136509-how-to-check-if-a-server-has-disconnected-a-socket.htm...

• Qt Connect() returns broken in Beta 3

  I have just opened an existing project in Beta 3 and while my code is largely intact, a number of statements important connect() were broken. For example, I can follow is no longer the State of loading of the example images

          // Load cascades image
      mTracker = new ImageTracker(mLocalImageUrl);
      connect(mTracker, SIGNAL(stateChanged (bb::cascades::ResourceTracker::State)),
              this, SLOT(onStateChanged(bb::cascades::ResourceTracker::State)));
  

  puts a red squiggle under the signal and slot with errors:

  -Function "stateChanged (bb::cascades:ResourceTracker:tate) ' could not be resolved

  -Signal/Slot ' trackImage.onStateChanged (bb::cascades:ResourceTracker:tate) ' is not defined

  I find it strange that the compiler thinks that the this keyword refers to the function and not the class. Parameters involving QLists of custom classes are also affected, which gives the error Signal/Slot 'QList' parameter cannot be resolved. Is there documentation on how to solve these problems?

  The IDE shows the errors or the compiler throws these errors? Its quite possible that the IDE is not just recognize them and say its a mistake when it should build fine