Computer of LAN ping

Similar Questions

• EA6300 LAN ping delay

  I have an EA6300, I have the following questions:
  1 why LAN ping delay instead of<1, especially="" when="" you="" download="" something,="" ping="" latency="" is="" more="" than="">
  2.2.4G speed displayed on your computer, is that 75 M is normal?

  I have disable after prioritization of media, ping delay to return to normal

  

  I have activate after media services, download the case in the absence of normal, delay of opening downloaded 300 ping delay

• I can't ping my own computer by using ping 127.0.0.1 why?

  I can't ping my own computer by using ping 127.0.0.1 why?

  Hello

  ·         Were there any changes made on the computer before the show?

  If the loopback test fails, the IP stack is not responding. This problem may occur if one or more of the following conditions are true:

  1. The TCP drivers are corrupted.
  2. The network adapter does not work.
  3. Another service is interfering with IP.

  Follow the steps in troubleshooting section and check if that helps:

  How to troubleshoot connectivity TCP/IP with Windows XP

  http://support.Microsoft.com/kb/314067

• How can I add a Linux system for a computer restore LAN Windows

  I have 3 MS Windows computers on a Linksys LAN router. There are two available printers by all three computers. I acquired a 1 terabyte computer with Centos6 installed. So far, I was able to conect to my router and installed the program email Evolution and also installed the Firefox browser. What I can't do, is add printers and communicate with other computers... It seems to work as a standalone computer. This question might be more appropriate for a Linux forum, but I thought I would try here first of all, I would really appreciate any help from anyone who might have some experience with Linux. Mine is limited as I do this as a project of learnng Linux.

  Bruno

  What you do not specify how the printers are connected to the network.  They are directly connected to the router with a cable of TCP/IP or are they connected to a Windows computer with a USB cable?  If it's the latter, then to access printers or files shared on your Windows machine, you will need to communicate with NetBios over TCP/IP (NetBT or NBT).  Linux machines usually use the 'Samba' program to achieve this.

  "What is Samba.
   <>http://www.Samba.org/samba/what_is_samba.html >
   <>http://en.Wikipedia.org/wiki/Samba_%28software%29 >

  HTH,
  JW

• go simple LAN ping

  I have two vista desktop computers that are on a wireless network.  They HAVE worked very well in the past, but now I can't ping from #2 à #1 but I have access to internet on #2 and all my settings are correct.  I CAN ping from #1 to #2.  I have all the network settings on except the password settings, without running antivirus, off fw and I have restarted both machines several times.  I also tried allocation of static ip addresses for the two machines with no luck.  A network of one-way!  Help, please.

  Gordon

  See if a firewall on #1 program blocks pings.  Note that some antivirus programs have functions of firewall. Boulder computer Maven
  Most Microsoft Valuable Professional

• What does it mean when my computer has been ping?

  While I have no idea what I do to fix my comp probs, I went into McAfee files.  I found "a computer at home 1 - 10.applewi.sbcglobal .net a ping your computer" in the log viewer.  Is this a virus?

  While I have no idea what I do to fix my comp probs, I went into McAfee files.  I found "a computer at home 1 - 10.applewi.sbcglobal .net a ping your computer" in the log viewer.  Is this a virus?

  N °

  Definition of ping: http://en.wikipedia.org/wiki/Ping

• QuickVPN connected, but I can't do anything on the LAN ping

  Hi all

  I try to use QuickVPN to connect to my corporate network. Yesterday I was to the point where QuickVPN actually connected and I could connect to the router from inside IP. But I can't see, or ping all computers on the LAN to company. Manual of the router says '' customer QuickVPN may access only the default LAN hosts. ''. Are the computers of the default of the company LAN LAN hosts?

  I added the router (RV220W) to the existing company LAN to test QuickVPN. The company LAN has a Small Business Server as a DHCP server and another router as the default gateway. The company LAN the subnet 192.168.1.0/24*, the cisco wan router has the subnet 192.168.103.0/24 and my VPN client is connected to a hotspot wifi with the same wan and LAN 192.168.3.0/24. The LAN of the cisco router address is 192.168.1.1.

  * I know now, 192.168.1.0/24 is the worst possible choice for a net business, but I didn't when I installed the Small Business Server. I'll try to change it to something like 10.123.45.0/24 later.

  Thanks in advance
  Mike

  

  Hello

  You can reach a PC in the LAN of RV220, because the default gateway is not RV220.

  This is what happens: the PC with fast VPN (for example IP: 192.168.103.10) is ping a PC with IP 192.168.1.10, via the VPN tunnel. Once the request arrives at the 192.168.1.10 PC, this PC sends the response to its default gateway (because don't have a direct connection to the 192.168.103.X network). If the default gateway is RV220, he'll know that the response should be returned via the VPN tunnel to the customer, but if it's another machine, it will just drop the package.

  In this case this another router (default gateway) must be configured with a static route, saying that subnet 192.168.103.x has as default gateway - 192.168.1.1 (RV220).

  As long as the IP address of the VPN machine fast is the same, it's ok. But if you move this PC to another local network, you will have again the problem.

  So if you plan to change the LAN IP of the fast VPN machine, I recommend using instead the Shrew VPN, where you can configure virtual IP on the client, that does not need to change.

  Kind regards

  Bismuth

• How to connect Equium A100 and second computer via LAN

  Hello

  I was wondering if someone could help me.
  My partner and I have some difficulty with the creation of a local network between its computer and my laptop.

  Basically, the main thing is that the computer can see my laptop, but it isn't recipricating.
  My laptop is the Equium A100 (XP media Center) and as far as we know really on his computer, it's that his dual pentium 4, windows XP Home Edition and it is a pain full in the back!

  Hello

  See this http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=3423&messageID=11170

  It is described how you can connect two PCs using cross-over cable.

• Home LAN Ping go only

  2 XP Pro computers on home network connected to the internet through Hub Ethernet card OvisLink. The two machines to connect to the internet.
  No. 1 machine pings the No. 2 but no. 2 can not ping No. 1.

  Off the two firewalls and "NetBIOS Over TCP/IP is enabled on both machines.

  HELP PLEASE!

  John

  What firewall is no. 1?  Sometimes, disable the firewall isn't enough, and you need to uninstall the firewall to see if it is causing the problem. Best wishes

  Steve Winograd
  Most Microsoft Valuable Professional (desktop experience)

• Urgent! Users of remote access VPN connects but cannot access remote LAN (ping, folder,...)

  Hello

  I am setting up a VPN on a Cisco ASA 5510 version 8.4 remote access (4) 1.

  When I try to connect via the Cisco VPN client software, I am able to connect however I am unable to access network resources.

  However, I can ping the servers in the other site that is connected through the VPN site-to site to the main site!

  VPN client--> main site (ping times on)--> Site connected with the main site with VPN S2S (successful ping)

  Please help me I need to find a solution as soon as POSSIBLE!

  Thank you in advance.

  Hello

  Please remove the NAT exemption and the re - issue the command but with #1, so it will place the NAT as first line:

  No nat (SERVERS, external) static source SERVERS_LAN SERVERS_LAN NETWORK_OBJ_10.10.40.8_29 NETWORK_OBJ_10.10.40.8_29 non-proxy-arp-search of route static destination

  NAT (SERVERS, external) 1 static source SERVERS_LAN SERVERS_LAN NETWORK_OBJ_10.10.40.8_29 NETWORK_OBJ_10.10.40.8_29 non-proxy-arp-search of route static destination

  After re-configured this way, make sure that this command is also available:

  Sysopt connection permit VPN

  This sysopt will allow traffic regardles any ACL a fall, just in case. Please continue to run a package tracer and post it here,

  Packet-trace entry Server icmp XXXXXX 8 0 detailed YYYYY

  XXXX--> server IP

  AAAA--> VPN IP of the user

  Don't forget to do the two steps and a just in case, capture Please note and mark it as correct the useful message!

  Thank you

  David Castro,

• question about data transfer from the computer using LAN network Analyzer

  Hello. I had a problem.

  I download the driver of instruments and settings S measured by the Rohde & Schwarz site.

  When I started using the measure, the error in the parser to network RSZVB-14 shows that

  «Distance error:-222, "data out of reach,: FREQTAR1»»

  In labview, had not any waveform.

  Need your help.

  Zinou

  Hello

  If you use RSZVB-14, it has frequency range 10 MHz - 14 GHz. example was written for models that start by 300 kHz.

  Just change the Start frequency to 10 MHz

  See you soon,.

  Milo

• Tecra A6 does not connect to internet with lan cable

  I got a new Tecra A6, (windows xp) which is barely a week. fine, except that when I connect my router to the laptop computer with lan cable broadband, I am not able to connect to the internet. When I connect the cable to the internet, I'm getting the lan icon works correctly, but when I open a browser page, it says no connection.

  considering that wireless works fine.

  help appreciated.

  Check the firewall settings.
  Maybe the firewall is on and does not allow you to open Web sites.
  Please also check the internet option-> connections in the

• Pavilion dv7-4180: LAN - does not connect

  Hi all

  I myself have set up in a new home and now am using a modem to the computer's LAN connection.

  I could not receive a signal when the connection of the modem to my computer, but on wi - fi systems, it works.

  Then on another computer, the LAN connection starts a blinking on the modem and there I go, connection

  through the LAN.

  The first computer that does not have a connection on the LAN-

  Q: what could cause that?

  Once again, it is very well when instead of a Wi - Fi connection and scoring in just this old LAN connection to my new residence

  does not cause it to connect to the top.

  Any advice on a particular problem is appreciated.

  AtAF

  Hi @AtAF,

  Thank you for your query.

  I understand that after moving into your new home, you cannot connect to your local network, is another computer.

  You are able to connect to hotspots Wi - Fi with your CV.

  When I did a search for your model of laptop, I got several results that you forgot to enter the two letters after the model number (example Pavilion dv7-4180us).

  How can I find my model number or product number?

  On this particular model that Windows 8 is not supported by HP so they do not list the drivers updated for it.

  Download or update of software and drivers for HP computers

  You did all your Windows updates?

  You use the same Ethernet cable that worked with the other computer?

  Have you ran the Windows troubleshooting tool?

  If you check device manager there is an error on the network card?

  Here is a link to HP - troubleshooting Wired Home networks (Windows 8) computers that should help you too.

  To say thank you for answering, please click the button below thumbs up .

  If this fixed the problem for you, please choose the solution to help others locate it.

  Good luck!

• Network connection problem Wifi (Ralink RT5390R...) and Ethernet LAN (Realtek PCIe...)

  Hello

  With my HP Desktop Pavilion P6-2417eb on a 64-bit Windows 8.1 platform, I have serious problems to connect to a network or the internet. The office is connected to a router with wifi capabilities and modem broadband with wireless internet capabilities.

  Several other devices (computer laptop Lan and Wifi; Android tablets; IOS Tablet; netbooks; NAS server) are connected to the network via wifi and Ethernet LAN calbe with no problems.

  After a long period of crossing possible problems, I come to the conclusion that it is a problem of my dekstop PC-related equipment. In the past, a reboot of the desktop computer was enough to settle the problem, but these days it is no longer possible. This afternoon I was able to connect for 15 min and after it ended again. It was the first in a week again. I post this message with my laptop. I have 4 possible for Internet connection but no wok with this desktop computer.

  The following products do not work in my desktop pc:

  • Ethernet Lan, Realtek PCIe GBE Family Controller
  • WiFi, Ralink RT5390R 802.1bgn Wifi adapter

  What can I do? What are the solutions?

  Thanks in advance for any help.

  LB1503

  Hello:

  The only suggestions I can offer would be to see if updating the drivers for these devices help everything.

  Here is the latest driver for the card directly from Mediatek (Ralink) wireless:

  RT2790 / RT309X / RT35X2 / RT539X / RT3290 / MT7630)

  15/04/2014

  V5.0.46.0

  Win7 32/64 Win8 32/64 Win8.1 32/64

  Here is the latest driver for the ethernet card.  Download and install the third-party driver on the list.

  http://218.210.127.131/downloads/downloadsView.aspx?langid=1&PNid=13&pfid=5&level=5&Conn=4&DownTypeID=3&GETDOWN=false

• Network connection wireless and cable - Internet access that allows on a computer that is connected to the network cable connection to a networked computer

  I have 3 desktop PCs. Machine A is Win 7, the B machine is XP, the C machine is XP.

  Machine A is connected to the router via cable and internet connection works. Machine B is wireless (the same router as a machine) and the internet connection works when I used that machine has b. Now I plugged in the machine C B machine with a crossover cable and wireless internet machine B does not work.

  I tried the IP and gateway addresses manually (since deleted). If I ping the computer A to B I get the answer to time to stop and even if I ping the B to A computer. However ping computer B to C and C to B work.

  I hope that I have omitted some important parameter, if anyone can point me in the right direction

  Hello

  If the bridge, the connection between C and B is the first to be configured with a static IP address that is on a different subnet * and then fill.

  Alternatively, you can use ICS, http://support.microsoft.com/kb/306126/en-us

  * On the subnet

  Classical IP looks like this (example), 192.168. 1 .x the first three groups are also called subnet, they identify specific network, x can be a number between 0 and 255 and it identifies each unique device on the network.

  An IP address of 192.168. 2 .x would be a subnet to another network.

  To assign a static IP address, see http://www.howtogeek.com/howto/19249/how-to-assign-a-static-ip-address-in-xp-vista-or-windows-7/

  Jack - Microsoft MVP, Windows networking. WWW.EZLAN.NET