Dreamweaver CC 2014 hangs during the update of the site cache

Similar Questions

• I am trying to install windows xp from the disk, but it hangs during the installation process. no error code. It just hangs. What is the cause and what is the solution?

  I am trying to install windows xp from the disk, but it hangs during the installation process. no error code. It just hangs. What is the cause and what is the solution?

  Hello

  1. at what stage of the installation, the computer crashes?

  2. what operating system was installed on your computer prior to this?

  If you have the similar problem as mentioned in these links, you can follow these links and check if the problem persists:

  Windows XP Setup stops responding (hangs) during the "Preparing Installation" phase

  Windows XP does not meet the Message "Setup starts Windows XP"

  Hope the helps of information.

• Firefox 38 update hangs during the rsyslog config on LinuxMint 17.1 cinnamon?

  Hello

  I used LinuxMint Update Manager to update the packages as usual.

  Firefox presents itself as an update, so I took that too far.

  In the middle of the installation while it configures rsyslog, it hangs after the display of "syslog user already a member of adm.

  He remained there until I disconnected and restarted hoping that should clear up the shot.

  Now, any use of apt dpkg or apt - get comes up with an error message saying to run ' dpkg--configure - a "which I did and ends up in the same time.

  Help? Caesar.

  Download Firefox full installation for all systems and languages {web link}

• HP Pavilion 23: computer hangs during the boot process

  Computer updates been made 2 days ago and has frozen black screen. Now does not start at the top. Starts the process and then freezes. He did start once yesterday and was going well for a few hours, then got a message saying computer had a problem.

  Error message:

  SYSTEM_THREAD_EXCEPTION_NOT_HANDLED (atikmdag.sys)

  Now back to not start upward again, hangs with the HP logo on the screen.

  Hi there @ldgie25.

  That the Forums are with you!  I understand that, after a few updates, your computer does not start correctly and freezes on the HP logo.   I'm happy to help you with this.

  Since it was started once, but then had a blue error screen, I suggest using the computers HP - use Microsoft System Restore (Windows, 10, 8).   Follow the instructions in the section «restore your computer when Windows is unable to boot normally»  See if it will start normally after the restoration. If yes then you probably want to prevent the offending update to install again.

  Please see the following for how to do this:

  How to temporarily prevent an update for driver reinstallation of Windows 10 - support.microsoft.com

  How to uninstall and updates to block and drivers on Windows 10 - howtogeek.com

  Please let me know if it works for you and if it does not solve your problem, please mark this message as a solution. Bravo would be appreciated as well.

• Satellite Pro A10 hangs during the installation of Win XP

  Hi guys,.

  just thouth I would ask why my new laptop will not install XP.
  Only, it crashes during installation. No n' achete purchased on this occasion, had no operating system installed.

  I wonder if it's a driver problem, using my xp disc I bought, but like I said that just, it will hang during installation.
  What I need to intergrate drivers somehow?
  I'm guessing that this is the problem?

  If so, how do I?

  see you soon

  I really wonder that your new laptop is probably produced about 5 years ago. ;)

  In any case, to install WXP use WindowsXP SP1 installations CD (factory settings). If you want to discuss a little more please explain to us what exactly is happening.

• [SOLVED] Windows 7 hangs during the "you want to allow this program to make changes to your computer.

  I was recently on my computer and running windows 7 with happiness and problem free, until I downloaded a file from the internet. When I opened it, windows asked me if I want to allow this program allow changes. However, there is the rub. When I click on 'Yes', the message will disappear, but the computer hangs at the screen has gone even a light, tinted gray, with all of the programs that are still running in the background. It freezes for about 2 minutes and then decides to return to normal, free for me to return to work and navigation. However, the program that I have originally intended to be performed by him to make changes didn't work at all. Confused, I ran over and over again, but with very little success, and the problem continued to appear. I tried to launch a clean boot, but that doesn't help more. Can someone help me please? Thanks :)

  Thank you for the support, but I solved the problem.

  I did a system restore, and it seems that a microsoft critical update was the culprit of all this? In any case, everything seems to work now and thanks again for all the support and help, I appreciate it a lot :)

• HP Pavilion p6-2069sc: computer hangs during the HP splash screen

  Hello.

  I plug an ASUS GeForce GTX STRIX 750Ti to use in my Pavilion P6 - 2069sc, but when I start the computer after installing my GPU, the screen hangs on the blue HP startup screen.

  When I try to hit the ESC key to enter the BIOS or any other keys it comes just a beep of the machine.

  It is a long beep every 20 seconds or so from the computer.

  When I use the integrated graphics card, everything works as they should.

  I already upgraded to 550W 300W POWER supply

  Because your computer has been manufacturer Sept 2011, there Legacy BIOS.  The latest vBIOS UEFI was initiated at the HP units at end of 2012.  That said, either you stay with a Legacy BIOS GPU card, or choose a dual hybrid card BIOS.  The GTX 660, or GTX 670, all of which are two high-end of the legacy card would be far superior to the GTX 750Ti.   All the current hype is looking for a lower quality card, the 750Ti, based on the more low power and some GTX offering a BIOS hybrid via Select manufacturer. The Asus could not be hybrids, as you can testify.

  http://www.hwcompare.com/17301/GeForce-GTX-660-vs-GeForce-GTX-750-TI/ 450W SS6

  http://www.hwcompare.com/17306/GeForce-GTX-750-TI-vs-GeForce-GTX-670/ 550W PSU

  http://www.GeForce.com/hardware/desktop-GPUs/GeForce-GTX-660/specifications

  Based on your existing new POWER Pack, (hopefully a quality unit), 660 GTX would be good.  In my humble OPINION, an EVGA GTX 660 is better based on your power supply of the system. Please call EVGA for re - check a Legacy BIOS.

  PS I have a EVGA GTX 660 and 670 in my BIOS Legacy of <>towers.  I tried an ASUS, but he did not have an ASUS motherboard. Strange, but ASUS check the fault has his own card. Cost me $50 return shipping cost, so Please check with any manufcacturer.

• Windows 7 hangs during the transfer of data from one drive to another

  This problem was pestering me for a long time, well over a year.

  When I transfer data from one disk to the other (generally large amounts), the computer crashes and I get a blue screen or it just restarts.

  Initially, I thought it was a faulty hard drive, so I replaced that, but the problem persisted. I ran diagnostics of smart drive on all my drives and no problems have been picked up.

  Then I replaced my RAM assuming there that all. The problem continues.

  Then I replaced the video card. The same problem.

  I then upgraded to windows 10 and the problem became more acute, so I rolled back to windows 7.

  The SSD has the latest firmware, the latest graphics card drivers.

  I think now it is one of the following two issues:

  Either my SSD drive that contains the operating system or motherboard?

  Someone at - it ideas of how to diagnose precisely this problem or how to solve it? Would contribute to a new facility?

  PC: Windows 7 SP1, AMD Phenom II X 4 965, Kingston 16 GB 1866 MHz DDR3 Non - ECC CL9 DIMM (Kit of 4) XMP beast series - HX318C9T3K4/16, AMD Radeon (TM) R9 series 200, Asus M4A87TD/USB3 motherboard

  Pilot, verified and associated usbfilter.sys from Advanced Micro Devices Inc. USB filter driver.

  Remove the driver current completely and install the latest driver available.  For instructions on how to do read everything to update the drivers of my partner JMH3143 http://answers.microsoft.com/en-us/windows/wiki/windows_other-hardware/updating-a-driver/a5e6345e-af9b-4099-bef0-8d22254aa1c1?tm=1436753520149 here

  Also and important you need to update this driver since 2005.  It is a known problem in win 7 (ASACPI.sys)

  Pre 2009 this driver version is a known cause of BSOD.
  
  Please visit Asus tek computer Inc. - support - drivers and download p7p55d the
  http://support.ASUS.com/download.aspx?SLanguage=en&m=P7P55D%20Le&p=1&s=32&OS=29&hashedid=e7zic83pvqsr80lm

  Scroll to the utility category, then scroll down to the "atk0110 driver for Windows XP/vista/windows 7 32 & 64-bit" (it is about 12 down).
  Download and install it.

  Go to c:\windows\system32\drivers to check and make sure that the file asacpi.sys is stamped 2009 or 2010 (not before).  If you are using Win 8 there are at least a 2012 version that is needed for this.  If you can't find it on the site of ASUS you can download using windows update.  Read about it here

• Will not save the site cache settings

  Dreamweaver CC2015.2 on Mac OS El Cap 10.11.6

  I'm trying to disable the site for my large sites cache. I go to the Site-> Manage Sites and selecting my site. I chose advanced settings, local news. I have to uncheck "enable Cache". The cache is disabled for the site until I re - start Dreamweaver and the setting is on "on" for the site.

  Any help would be appreciated!

  When DW start doing goofy things like that, I usually delete the file cache program to recover...

  DELETE cache: removing a corrupt cache file

  -Sometimes, the clearing of the record of the entire configuration of the described location will do so when the cache file is not enough.

  If this does not work, restoration of DW preferences generally will be: unusual behavior in Dreamweaver? Try restoring preferences.

  .. .and if all else fails, a total erase/reinstall using the cleaning tool will give you a new installation of 100% (make backups of your site first settings if you do this under Site > manage sites > export): use of the cleaning tool cloud creative to solve installation problems

• SL410 hanged during the update of the BIOS

  Same thing happened to me to what is described in this post BIOS problem

  So basically the BIOS update utility hung on the stage where he asked me to restart the computer.

  The YES button was stressed, but neither the keyboard nor the mouse pad reacted.

  I tried external keyboard and mouse with no luck so I decided to stop by pressing the power button.

  The laptop starts now but it will restart after a few seconds, not even doing the Windows logo.

  I disconected from the BIOS backup battery and now when it starts I get ERROR 0199 but has access to the

  The utility BIOS Setup now.

  Are all the pins on the card which would reset the CMOS?

  After some fiddling I found that the solution was to get into the BIOS as suggested, and then press F9 to restore the default settings, and then click F10 to save. Now all works again

• Updates for Windows 7 cause PC to hang during the startup or reboot

  I had trouble with the latest updates for Windows 7 on my 64-bit computer.  Whenever I have install the PC does not restart.  I had to restore twice.  Updates are KB2284742, KB2388210 and KB2434419.  I had Avast on my computer and now deleted and installed McAfee.  I also tried Lavasoft Ad-aware, but he's also gone now.  Prior to the first installation of this update, he's failed several times.  Finally, I followed someone's suggestion to rename catroot2 to catroot3.  This allowed the installation works.  I scanned for virus and McAfee says that there is not.  Lavasoft had said there was an and it has been deleted, but since I restored it twice, I'm not sure if it's still there.  I'm reluctant to try to load Lavasoft once again, like the elimination of the virus is what started the problem of PC with reset.  I suspect that what they thought was that a "virus" was not.  Now that I am restored to before the update my PC very well is rinning, but of course, I keep getting reminded that I have 3 critical updates to run.  I am not advanced a user so am at a loss, can I ignore updates and try to continue to work without them?

  Hello

  You can try to manually install the update one and check what is happening. Download the updates from the link given below using the KB numbers.

  http://www.Microsoft.com/downloads/en/default.aspx

  Note: Before installing each of the updates, configure the computer to clean start so that none of the third-party application interferes with the installation process.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: When you are finished troubleshooting, follow step 7 article to start on normal startup.

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Computer hangs during the installation of updates (I have to install 64)

  What should I do when I cannot yet download or update anything without my computer freeze or lock up on me.

  Hi floridahmbdy,

  Check if an error message or error code listed in the event viewer, you can check the link below:http://windows.microsoft.com/en-us/windows7/What-information-appears-in-event-logs-Event-Viewer

  Try the methods below:

  1. start the computer to boot and check if you are able to install the update to Windows. Link below will help you to start the computer in clean boot:http://support.microsoft.com/kb/929135

  Make sure that you reset the computer in normal mode in step 7.

  2. you can also try the steps from the link below: the problems with the installation of the updates:http://windows.microsoft.com/en-us/windows7/Troubleshoot-problems-with-installing-updates

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Virtual Appliance update hangs during the preparation stage of files

  It is a continuation of my attempt to upgrade this thread saga:

  

  I've been trying again to do the upgrade, but the last 2 attempts seem to stagnate outside in the scene where he says that she prepares the files, and mail is still delivered. Since it's the virtual appliance, I could make a snapshot before starting and then go back to it in case of failure, which I am very happy for.

  This same problem happened to me on an update there are several years and Sonicwall tech support person he restarted just for me and then again upgrade - if I remember correctly - and then it worked. But when I tried, he got always outside. Is there anything else I can try?

  Make sure you use the correct upgrade file.

  The one that ends with. sh.

  Make sure also that he has not been renamed or had added nothing to it when downloaded and saved.

  The other that you download is for the deployment of a new virtual appliance.

  If you are very low on disk space, you may need to look at what is using that space.

  What is the junkbox?

  You probably want to prosecute and to talk to a technician.

  If there is not enough free space, the upgrade process may fail.

• Game and the system hangs during the update of software occurs prompt

  When you play many I experience a complete system failure after a game for a variable period.  I suspect that the problem might relate to the next available software updates and a quick occurring asking if I want to load/install the update.  I think that my PC is set to interrupt the game, when occurs a such prompt and I suspect that some games cannot manage this interruption and cause the crash.  Problem is that I can not find where swith this parameter to stop or INTERRUPT a game session when an update is available.  Update from Dell Support Center are an example of these software updates.  Any comments on this issue would be greatly appreciated.

  Thanks - Kevin

  Yes - you probably aren't going to find any setting specifically says: "I play a game, let me alone.»

  I've been a player for 20 years and did not have the updates stop playing once (and some of them were worthy of the experiences of game marathon. 'ha').  Of course - about my gaming PC I always put updates to the manual because I know if I leave auto on (at least) most of the time Windows updates, it could decide to update and restart at any time (without some other parameters).

  What I mean is that I think that looking in the right place, for the most part, to solve the problem you are experiencing.  Please follow the advice and at least update your video drivers (which is one of the largest components of the more modern games) and you can make the audio card motherboard chipset drivers while you're there.

  "Dell" stuff - it is not necessary.  Really.

• Computer hangs during the update of Windows 8

  My laptop recently posted a message saying that he would automatically restart in 15 minutes to install a Windows Update.  After 15 minutes, it restarts and a screen will appear that says "Configuring Windows updates.  Do not turn off your computer. "He started to install, then stalled to the point 13%.  I rebooted several times, and it keeps the timing at this point.  I can't go past this screen for something else, so I have no use of the computer right now.  Y at - it a fix for this problem?  Thank you.

  Hi Rebannle,

  What is the brand and model of your computer?

  This problem may be caused for the following reasons:

  Conflicts of hardware/software.

  System files are corrupt.

  You can see the steps from the following thread that was answered by MikeSimmonsUK on November 7, 2012, that will help us solve the problem.

  Windows 8 updates stuck at 13%. (NOTE: laptop HP - audio drivers)

  If the problem persists, you can also see the steps in the following Microsoft article: Windows Update crashes when installing updates in Windows 8, Windows 7, or Windows Vista

  Notes:

  When you perform the System Restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  When running at Refresh: the applications that came with your PC or you installed on Windows Store will be reinstalled, but all the apps you have installed other Web sites and DVD is deleted. Windows puts a list of applications on your desktop after you refresh your PC.

  Keep us informed on the status of the issue.