General issues related to my router E2000

Similar Questions

• I have an airport time capsule that was related to my router / modem.  I changed my router for a better.

  I upgraded my router (modem).  Now my wifi has a different name and different password.  What should I do to ensure that my Airport time capsule is always related to the router - even if it always shows the green light.  How will I know if the airport is still save properly?

  How will I know if the airport is still save properly?

  You can consider trying a backup to see what is happening.  If you decide to do...

  Click the 'clock' Time machine at the top of your Mac.

  Click back up now

  

• Installation router E2000 works not

  I want to install router E2000 on a laptop with Vista and a wireless adapter Topdog Marvel... automatic installation said that he does not succeed... any ideas of what I can do to make this work?

  Thank you for having responded - we thought about it - my problem is that I had to uninstall our software Manager for Microsoft Wireless would serve as manager - once we have the router worked!

• It is a way to password protect guess access on a router E2000 wireless?

  I want to put in place access invited to my router E2000, but only for a few friends, not my entire neighborhood. When I created originally by Cisco Connect, I was able to set up an account with a password, but it shows up in my registration non-secure wireless - you don't need the password to access. Is there a way to password protect the connection without comment thread?

  Yes, it does not appear to be unsafe, but in order to be able to surf you need generates the Cisco Connect password.

  So no, it is not open, but I think they are always connected to the router, and that's not good either.

• Cisco Connect connects to the router E2000

  I got an E2000 router, set up and works very well for years. Today, I tried to connect with Cisco Connect, I want to establish a network of separate comments (by the way, if there's a way to do this through the web management interface, please let me know!). However, the software is unable to connect to the router; the progress bar gets to 25%, and then eventually times out. I tried several computers on network, cable and wireless, with the same results. Any suggestions? Thank you!

  I solved the problem; I activated the setting "Allow users to set up" in the "Administration" tab, as well as utility access Web via HTTP. I don't know which of these settings did the trick, but I was able to connect and configure the network invited (even from a PC wireless).

• new computer with 802.11ac - router E2000

  Purchase of a new Dell - choices are 802.11ac or B | G | N | wireless network.

  E2000 is N.  I f I buy computer with AC, it will work with this router?  I'm pretty good, but not a techie.

  It should be backwards compatible. Somewhere in the specifications for the pc card it must be said that

• static routes E2000 installation failure

  I am currently, with success, using a router WRT54g2 and wants to replace it with an E2000

  The part of this installation wireless is not in use at this time.

  The internet unfiltered is via a cable, through a mute switch, static IP gateway at 67.201.177.129 NM 255.255.255.128

  The address assigned to the router/firewall is 67.201.177.250

  Access to the router through the web interface, I am able to ping 67.201.177.136 but not the door entry.

  I have captured in the files PDF, equivalent screens, if necessary and put them to capture

  Note: Files with the prefix "bad" come from the e2000 and other files come from the e2ooo

  Any ideas where I'm wrong?

  Thank you

  Probably the main router to 67.201.177.129 does not quickly change the MAC address of opportunity for your IP 67.201.177.250.

  Try the function of the cloning MAC address on the E2000 to clone the MAC address of the WRT54G2.

• Issues connecting to a router from Draytek L3 SG500-28

  Hi all

  I really struggle with this one. I have a SG 500-28 L3 switch with a link to trunk work to two other L2 switches. I am trying to allow guests in VIRTUAL LANs for access to the outside world... the L3 switch is connected to a router Draytek. I have assigned an IP address to one of the ports and set routing in both directions of L3 to the router. I can ping from the L3 switch to the router and the router to the L3 switch, but no host in any VLAN only can ping more far than the interface IP 192.168.254.253. Can anyone help with this? Is there something specific in this switch I'm missing? IP routing is enabled on the L3 switch.

  The L3 config is here:

  switch8abb2b

  v1.2.7.76 / R750_NIK_1_2_584_002

  CLI v1.0

  SSD of encrypted file indicator

  @

  SSD-control-start

  config of SSD

  control of password file unrestricted SSD

  no control of the integrity of the file ssd

  SSD-control-end cb0a3fdb1f3a1af4e4430033719968c0

  !

  database of VLAN

  VLAN 10,20,30,100

  output

  Add a voice vlan Yes-table 0001e3 Siemens_AG_phone___

  Add a voice vlan Yes-table 00036 b Cisco_phone___

  Add a voice vlan Yes-table 00096e Avaya___

  Add a voice vlan Yes-table 000fe2 H3C_Aolynk___

  Add a voice vlan Yes-table 0060 b 9 Philips_and_NEC_AG_phone

  Add a voice vlan Yes-table 00d01e Pingtel_phone___

  VLAN voice Yes-table add Polycom/Veritel_phone___ 00e075

  Add a voice vlan Yes-table 00e0bb 3Com_phone___

  Hello interface range vlan 1

  hostname switch8abb2b

  username privilege 15 0c4d0931711a0e9cb22337c1adbe39091ad15a73 encrypted password cisco

  !

  interface vlan 1

  IP 192.168.1.230 255.255.255.0

  no ip address dhcp

  !

  interface vlan 10

  Name SERVERS

  IP 10.0.10.254 255.255.255.0

  !

  interface vlan 20

  DISTRICTS of name

  IP 10.0.20.254 255.255.255.0

  !

  interface vlan 30

  name of LABORATORY

  IP 10.0.30.254 255.255.255.0

  !

  interface vlan 100

  name ITECH

  IP 192.168.12.254 255.255.255.0

  !

  interface gigabitethernet1/1/1

  switchport trunk allowed vlan add 10,20,30,100

  default switchport vlan tagged

  !

  interface gigabitethernet1/1/24

  IP 192.168.254.253 255.255.255.0

  !

  IP route 0.0.0.0 0.0.0.0 192.168.254.254

  The draytek routing table is here:

  Key: C - connected, S - static, R - RIP, *-default, ~-private

  * 0.0.0.0 / 0.0.0.0 via 172.16.0.1 WAN2

  S ~ 10.0.0.0 / 255.255.0.0 via 192.168.254.253 LAN1

  S ~ 192.168.12.0/ 255.255.255.0 via 192.168.254.253 LAN1

  S ~ 192.168.1.0/ 255.255.255.0 via 192.168.254.253 LAN1

  C ~ 192.168.254.0/ 255.255.255.0 directly connected to LAN1

  C 172.16.0.0/ 255.255.0.0 directly connected WAN2

  I am also getting this error periodically on the L3 switch. Not sure if it is related to the problem.

  switch8abb2b # 19 July 2012 18:37:27 % CDP-W-NATIVE_VLAN_MISMATCH: incompatibility of VLAN native detected on the interface item in gi1/1/1.

  Any help would be greatly appreciated!

  Chris

  Hi Chris, the problem seems to be the router. It does not support interface trunk/sup dot1q or it back pointing you are missing the static routes, to the SVI to the switch.

  -Tom
  Please mark replied messages useful

• Issue of activity of router

  -JDeveloper 12.1.2

  -new workflows

  Situation within the bounded task flow is shown on this photo

  studyBrowse is a .jsff page fragment file that has table with selectable lines. There is also a button on the page when you click the following code is triggered in the bean to support:

  public String b1_action() {}

  Links DCBindingContainer = (DCBindingContainer) BindingContext.getCurrent () .getCurrentBindingsEntry ();

  DCIteratorBinding dcItteratorBindings = bindings.findIteratorBinding("StudyStaffIterator");

  ViewObject voTableData = dcItteratorBindings.getViewObject ();

  Line rowSelected = voTableData.getCurrentRow ();

  System.out.println (rowSelected.GetAttribute ("StudyId"));

  Return rowSelected.getAttribute("StudyId").toString ();

  }

  According to which line is selected, I'll pick up the chain. The string value, the control should be user to a specific page. For this, I use router activity called pickupStudy.

  < router id = "pickupStudy" >

  < case id = "__10" >

  < expression > #{backingBeanScope.Studybrowse.b1_action eq 'P2'} < / expression >

  < result > mfrp2 < / results >

  < / Body >

  < default - > mfrp2 < / default >

  < / router >

  In the above example, if the string returned in a table is "P2", I want to take the case of control flow "mfrp2".

  Moreover, in my application, it cannot be default result for this activity of the router. Any string returned by the table will have his own case of control flow; Worst case, if for some reason, I get unknown string then I should stay on the page studyBrowse and maybe the message at the top of the page that is to say as an error

  Now, when I tested the above, I get:

  < 2 January 2014 8:17:38 AM CST > < error > < oracle.adfinternal.controller.application.AdfcExceptionHandler > < ADFC-50016 > < ADFc: when Manager application exception exception handling threw a new exception.

  oracle.adf.controller.activity.ActivityLogicException: ADFC-02013: ADF controller cannot find metadata for activity ' / WEB-INF/prepare-study.xml#prepare-study@pickupStudy'.

  at oracle.adfinternal.controller.util.Utils.createAndLogActivityLogicException(Utils.java:232)

  at oracle.adfinternal.controller.engine.ControlFlowEngine.doRouting(ControlFlowEngine.java:1105)

  at oracle.adfinternal.controller.engine.ControlFlowEngine.doRouting(ControlFlowEngine.java:950)

  at oracle.adfinternal.controller.engine.ControlFlowEngine.routeFromActivity(ControlFlowEngine.java:551)

  at oracle.adfinternal.controller.engine.ControlFlowEngine.performControlFlow(ControlFlowEngine.java:160)

  at oracle.adfinternal.controller.application.NavigationHandlerImpl.handleAdfcNavigation(NavigationHandlerImpl.java:115)

  at oracle.adfinternal.controller.application.NavigationHandlerImpl.handleNavigation(NavigationHandlerImpl.java:84)

  at org.apache.myfaces.trinidadinternal.application.NavigationHandlerImpl.handleNavigation(NavigationHandlerImpl.java:50)

  at com.sun.faces.application.ActionListenerImpl.processAction(ActionListenerImpl.java:130)

  at org.apache.myfaces.trinidad.component.UIXCommand.broadcast(UIXCommand.java:190)

  to oracle.adf.view.rich.component.fragment.ContextSwitchingComponent$ 1.run(ContextSwitchingComponent.java:130)

  at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent._processPhase(ContextSwitchingComponent.java:461)

  at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent.broadcast(ContextSwitchingComponent.java:134)

  No idea what I am doing wrong?

  Timo actually I reach the method, the problem seems to be related to the logic of router result and method.

  I'm reading Frank http://www.oracle.com/technetwork/developer-tools/adf/learnmore/45-decision-based-method-outcome-169187.pdf white paper

  and my bean support method to modify as follows:

  public String b1_action() {}

  Links DCBindingContainer = (DCBindingContainer) BindingContext.getCurrent () .getCurrentBindingsEntry ();

  DCIteratorBinding dcItteratorBindings = bindings.findIteratorBinding("StudyStaffIterator");

  Line rowSelected = dcItteratorBindings.getCurrentRow ();

  System.out.println (rowSelected.GetAttribute ("StudyId"));

  RequestContext.getCurrentInstance () .getPageFlowScope () .put ("chosenStudy", rowSelected.getAttribute ("StudyId"));

  Returns a null value.

  }

  What seems to be missing in the book of Frank's 'estimatedRowCount' variable or in my case "chosenStudy". Somehow, he must exist under pageFlowScope design-time. How to add?

  As you can see in this photo, I'm unable to write EL for the router because it can be found under the pageFlowScope

  http://Tinypic.com/r/2mr9ocy/5

• Issues related to the parental control

  When you try to view the content on Apple TV apps, you may consider some episodes. He said that you are not allowed to view this content. Set parental controls. We have not enabled our parental control; all restrictions are disabled. Any thoughts?

  Restart your Apple TV.

  To restart your Apple TV (4th generation), go to settings > system > restart.

  For Apple TV (3rd generation and earlier versions), go to settings > general > restart.

• General issues (iFilter, .syf and EM simulation environment)

  Hello!

  I have a few general questions, ranging from corresponding EM simulation symbol creation and design of network environment. I would be really grateful if someone could take some time to respond to these in as much detail as possible.

  (1) I use iMatch Wizard in iFilter to design the matching network of entry for the LNA and PA. But I noticed that I get the best correspondent for the LNA (verified by Zin measurement at the source of the device with the included matching network) when I do the correspondence for the combined impedance. However, in the case of the PA, this happens only if I design the network with the correct impedance and not its complex conjugate. Anyone know why this is the case? Or by popular practice, in which case the combined complex should be used for the corresponding network design?

  (2) how can I create my own .syf file to be used as a symbol for a system I design? If I have the .syf how do I appear in my list of existing library of symbols?

  (3) in the EM simulation environment, how to decide the spacing of the grid? Yet once, EMsight I cannot add ports in the structure of Employment, if the structure is not aligned with the grid. How to manage the grid alignment so that the ports are attached without worries? Also, in the EM structure is an available at the entrance x and is coordinated to a partciular shape/structure so that it will sit in the coordinates and will allow me to build the forms around him?

  I apologize for the length of the questions but get these deleted will help a lot!

  Thanks in advance!

  1. it is the plug.  You are probably using the gamma to the research in the output in the design of LNA (so your load must be combined), but using the desired gamma (manufacturer?) load design PA

  2. up to the v11, it's probably easier to just import the .syf in each project where you want to use: project > Circuit symbols > import symbol.  In v11, just help > show files/directories... > AppDataUser, create a folder named symbols and empty the file .syf in there.

  3 EMSight is ideal for the subset of the problems to which it applies, but otherwise it's pretty restrictive.  The ports must be on the limit, either on the walls or up/down drivers.  The latter requires a via, which does not incorporate to turn off automatically. etc.

  X and are grid sizes are defined in the enclosure.  When you draw, you can press the tab key to enter the coordinates manually.  However, I recommend that you check the mesh on the structure of your EM before you simulate to make sure that you are not shorting adjacent shapes, or decompose adjacent metal.  Download AXIEM, it blows EMSight out of the water.

• Issues related to the parental control EA6900

  I have my setup of parental control to block access from 22:00 to 09:00 however, it does not automatically access when the time changes to time 'unlocked '. Curiously, it still shows the message 'parental control block. I have to disable the parental control to allow access to devices after 9:00 and then it must reactivate at 22:00 to block access again.

  I've also updated the latest firmware (1.1.42.161129). It does not seem to be 2 versions (V1.0 or V1.1), however, these two seem to be the same file. I used the correct version for my router (V1.0).

  I want to stay with what you have for now and look to see if it works on some devices. Check that the clock on the router is configured correctly. See also if certain sites are blocked and others not. I think there's a bug where some sites using https:// is not to be blocked but http:// did. It worked correctly before the upgrade? Remember you of what was the old version? The cancellation is made by the interface of the router and there is a button to restore but still, if restore you an unwanted version which isn't good either. Better do small things first.

• EA3500 issues related to Internet wireless

  Hello world

  We had trouble with our EA3500.  I spoke with tech support but could not afford it, so they sent me here.

  Our EA3500 works well, sometimes, not others.  It seems that there is a problem with the wireless internet signal.  For example, I can be reviewed online very well when I am connected to a LAN, but all of a sudden, internet wireless will cease to function without apparent reason, even if connected wireless devices must complete signals.  When this happens, all connected in LAN devices still work while those connected wireless are not.

  Until I finished the call with the Linksys tech support, they mentioned that I might need to update my firmware.  This could be the case.  I'm on a macbook pro 2007 at this time, and update Linksys program comes to about 88% complete and then informs me that the update failed.  Don't know what that means.

  Where should I go from here?  Any help would be appreciated.  I must also mention that we have a RE1000 about 50 feet away from the router, and I'm not sure if that plays in this.

  Thank you very much!

  Johnny

  Here is an example of good wireless definition for this router also, I recommend the classic firmware.

  

• Issues relating to Internet WRT110

  It happens every morning when I wake up.  I unplug my router & modem every night and in the morning that I plug them back in.  My computer (or something else, that I have connected to it) has some problems with connection to the internet, almost as if there is no absolute communications of the modem to the router.  The only thing that works for me to get up is to change the MTU settings on the router configuration page.  The problem with that is that I have wireless turned off so that the internet at work.  Once I changed the MTU settings internet works perfectly fine, but I can't go back into the router configuration page, until I have restart the router.

  This has happened recently and I don't know why he started to do so.

  Any suggestions on why he could do this and how can I solve the problem?

  I suggest that you reset the default router and reconfigure the router from scratch. If there is a updated firmware to update, the flash.

• In all of the possibly performance issues related RAM

  Hello

  Trying to play PC games recently, I had a few problems. Yesterday, I solved a problem of RAM where it says 16 GB installed but 3.46 GB usable by using msconfig. That has been corrected (apparently) However most of my games just get past title screens and even when they do they are slow as * / crash most of the time: nothing has changed.

  I have a GTX 770 so it is a recent issue, because he was working fine until last week. Driver is up-to-date as with all updated regularly through steam/uplay games. One glaring problem I see maybe I have 9 GB on Windows (c) to the left, but I really would not have thought that to be a problem.

  Any feedback would be greatly appreciated.

  Thank you

  Hello Rupert;

  Thanks for posting your question on the Microsoft community.

  Thank you for details on the issue.

  This problem may occur because of corrupted display driver or due to virus or malware.

  I suggest you update the driver from the website of the manufacturer of the computer display and check the issue.
  Reference:
  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows/Update-driver-hardware-ISN

  Please also run Microsoft safety scanner to check and remove any viruses or malware that may cause the problem.
  Reference:
  Microsoft safety scanner
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  I hope this information helps.

  Please let us know if you need more help.

  Thank you