HP DVD/CD Rom

Similar Questions

• Satellite Pro 2100 DVD - CD ROM issues

  What is the name for the reader of standard DVD-CD ROM attached to this one. Mine is not removable, but it has suddenly stopped working properly.
  I would like to get a new one, but can you all please advice how to remove the old. Also how or where I can buy a replacement that works with this laptop specification (Please provide the name of the product or code). Thanks to you all.

  Chan

  Hi chan

  You should contact the Service partner. They can give you this kind of information, or order a new one. Replacement can also be dangerous because you can damage some hardware components or cables another. Please be careful about this. A small mistake by yourself can you cost a lot of money.

• Satellite Toshiba SA60-742, DVD - RW rom cannot burn DVDs

  The DVD - RW rom don't recognize any blank DVD (it asks to insert media, but the DVD is already inside).
  I can read CDs and DVDs (with movies), but I can write just CD. Where is the problem.

  Post edited by: clara_anghel

  Hello

  What type of DVD you want to burn? DVD-R or DVD + R?

  DVD + R are not supported by your player. I found the following list what speed and media your Player supports:

  Maximum speed
  Read
  CD-ROM, CD - R 24xMax
  CD - RW 12xMax
  DVD-ROM 8xMax
  DVD - R, DVD - RW 4xMax
  DVD - RAM N/A

  To write
  CD - R 16xMax
  CD - RW 4xMax
  HS CD - RW 10xMax
  DVD - R 2 x
  DVD - RW 1 x

  Rudi Bye

• Satellite M30: Lack of reader DVD-CD ROM D:

  MY COMPUTER SATELLITE M30 IS MISSING, perhaps DAMAGED, the EQUIPMENT RELATIVE to the UNIT DISC DVD-CD. I TRIED TO CANCELED AND REINSTALLED, BUT THE MESSAGE FOLLOWING ERROR APPEARS: "DVD-CD ROM UNIT NOT CONNECTED." SO FOR NOW I HAVE C: DRIVE UNIQUE FIXED WHERE TO FIND HARDWARE AND DRIVER?
  I USE A MAT * A UJDA 750.

  Hello

  If the drive is not listed in Windows Explorer can you please let us know what status a CD/DVD drive in Device Manager (is there an error message like code-xxx)?

• DVD / cd - rom not find disc dvd

  Hello. When I put disc in the drive, nothing has been found. December midle evrething was ok, I can read the dvd.

  I try troubleshooting - configuration of a device. They can fix isuues, they show 3 problems: hp DVDRAM GU70N has a driver problems - not not fixed, USB - if xHCI host USB controller has a driver problem - not not fixed, material changes could not be identified - detected.

  I'm trying

  System - Device Manager - DVD/CD-ROM drives - hp DVDRAM GU70N status - properties drive - peripheral:

  Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19)

  Driver is up to date and show only the CD - ROM Drive

  Hello

  Try the rest of the procedure to the title of the subheading resolution - method 3: manually difficulty corrupt registry entries on the link below to remove upper and lower filters and see if that helps the issue.

  http://support.Microsoft.com/kb/982116

  Kind regards

  DP - K

• DVD/CD rom drive reads CDs but does not read the DVD.

  My Dell Inspiron 1300 laptop has a DVD/CD rom drive.  It loads all the CD I want and them automatically opens on the D drive.  When I put in a DVD movie it will not play.  I open my computer, and then look at the D drive, and it does not even recognize that there is a DVD inside but it shows a screen of a CD that I put in there.  This tells me that it works and it has a green light on the side which shows.  Also, when I insert the DVD it makes sounds as it tries to recognize, but then it stops and does not appear.  Can anyone help?  I really appreciate it.  I'm not very savvy computer.  I know that some in this topic because I am a teacher and try to catch up with things, but I'm certainly no computer technology.  Thank you very much!  Let me know if I need to give more info.  I think the reader is Sony CRX835EK but I'm not 100% sure on this one here.

  If your Player reads cd but not dvd which indicates that the material works very well. You need to change the registry inorder to solve this problem.

  1) click on the start menu
  2) click on 'run '.
  (3) type "regedit" and click ok
  4) go to the key of the string "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}.
  (5) delete "upper filters" and "lower in the right window.
  (6) right click on my computer in the start menu.
  7) click on properties
  8) go to the Hardware tab
  9) click on Device Manager
  (10) expand the dvd/cdrom drives
  (11) made a right click the dvd rom and click on uninstall
  (12) restart the computer

  After the reboot, windows should automatically install a ROM clean disc and read DVDs very well if you have the correctDVDdecoders

  

  .

• DVD / CD ROM Drive - cannot load the drivers

  My DVD / CD ROM has stoppped working.  Replaced by a new, but get this error in Device Manager

  Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)

  New CD-ROM/CD-RW, or DVD-ROM, etc., usually never come from the factory with

  the parameters of the right stem. Take the device, look at the back, place the jumper pin plastic.

  set to slave or master, if possible, install it on another cable IDE, set another pin device

  According to the needs. XP will reinstall at startup.

  In addition, most of these devices is "firmware" updates, go to his web site from mfg & install it

  If it is available...

• DVD/cd rom drives

  trouble with dvd/cd rom drives, it gives me a code 39 (damaged or missing driver)

  Try following the steps under "Windows XP" in the article following the MS KB:

  http://support.Microsoft.com/kb/982116

  These measures, to remove the UpperFilters and LowerFilters, values if they exist, in the registry key named can help.

  Create a System Restore Point beforehand and restart the computer later.

• DVD/CD rom drive

  I recently took my computer in to get fixed because it crashed.  When I came back, I found out later when I tried to use my DVD/CD rom drive that he had disappeared.  I have done research on the internet about it and found a lot of sites that talk about drivers update and deleting files in the registry to get back, but my problem is it disappeared completely.  Also, I got F, J, & K drives and they are gone also.  I mean gone... no linked files or anything like that.  So this made my DVD/CD rom useless player.  I call the guy who worked on my computer, but it is difficult to get your hands on.  My computer is a Dell 2009 Windows Vista desktop computer.  I can't even try to reinstall Vista as the hard drive does not work.  Can someone give me any ideas as what to do?  Is there anywhere I can download files to make it work again?  Any info would be greatly appreciated.

  Hello

  Other to try the information contained in the links, which you have used a part of, take it back to the technology that worked on your machine.

  And we do not know if the connection cable it is physically disconnected if work done on your machine

  There is a "Fix - it" Microsoft for your problem on this link

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  If above doesn't fix it, continue with the help of Microsoft:

  http://support.Microsoft.com/kb/982116/en-us

  See you soon.

• DVD-CD ROM DRIVE SUDDENLY STOPPED WORKING

  My DVD - CD rom suddenly stopped working.  It does not appear on my computer.  In Device Manager, it shows the exclamation point in a yellow triangle and has the following: Windows cannot load the driver for this hardware device.  The driver may be corrupted or missing. (Code 39).  I tried updating the driver, and he said that the best updated driver is already installed.  But it won't work.  When I put a disc in, the green light as it tries to work, but nothing.  In the properties in Device Manager, he suggested looking for a microsoft solution and I did it and there is no solutions.  Help, please!  I have install all the recommended and important updates, I have this game automatically.  I have Vista service pack 2.  Apart from this, the computer works fine.  I appreciate any help you can offer.  Thank you.

  Hello

  Code 39 means that the driver is corrupted or missing.

  Do this - control panel - Device Manager 1 - click double-click on the drive - CD/DVD
  Driver update (this can do nothing as MS is far behind the drivers of certification). Now LAW
  Click on - UNINSTALL - REBOOT - this will rebuild the driver stack.

  Normally the above will solve this problem otherwise working your way down through them, even if you did
  them before.

  A MR FIXIT
  http://support.Microsoft.com/kb/314060

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  or

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Other possibilities include loose contacts or cables and maybe a bad disc.

  Also check with your system manufacturer to see if there are any updated drivers for your DVD. Or even if it
  are you can reinstall the 'old'. Many use Windows default drivers however some special aura
  ones. Also check the website of the manufacturer of the car.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• support of DVD/CD-ROM-CD-ROM-drives

  Hello

  can someone help me with this please? When I go in to my manager.under camera my dvd/CD-ROM-CD-ROM-drives that I have a yellow exclamation mark on hl-dt-st-dvd-ram-gh10l I right click on it, click on properties in the status.it device tells me windows cannot load the driver for this hardware device, the driver may be corrupted or missing code39.can someone please tell me how fixs this? I have hp-pavilion a6400f desktop pc with windows 7 32 bit thank you for any help in this

  Run the Microsoft Fixit and this should solve the problem

  http://support.Microsoft.com/GP/cd_dvd_drive_problems

• Satellite M30X: DVD/CD rom drive does not work

  Hello
  I hope someone can help. The reader above will not now recognize any media inserted. He snores for awhile then stops. I cleaned the lens and cross also support and diagnostic tests and they cannot me more help.

  I also reinstalled the driver but no joy.
  This means a new DVD/cd drive is necessary?
  It is removable of the laptop and easily replaceable?
  Where I would get the part - M * a DVD ROM UJ-82OS?

  How much would it cost?

  Thank you all for your suggestions?

  Jim

  This looks like a simple material defect
  So what is the solution? I do think that a replacement device

  I think that different readers are compatible with this laptop. So I can t give you and advice how much it costs but the best answer you'll get the Toshiba service partner in your country

  But the slim laptop drives are usually a little more expensive than shared drives for desktop computers

• DvD - external rom for Portege 3500

  I recently acquired a Portege 3500 as well as an external DVD-ROM from Toshiba (model No. PA3246U-1DVD). As I try to find the drivers for this I failed horribly (for the dvd - rom). It is connected via a CardBus card. Toshiba says that drivers should be part of Windows but my system is unable to find them. I was wondering if anyone here had drivers for the Portege 3500 for it. If I'm not mistaken, they should be for PCMCIA adapters. Any help on this would be greatly appreciated.

  * Note: retailers say the ships of external Toshiba DVD-ROM with cd contain the manuals and drivers. If anyone has a copy or could direct me to a site with them it would be greatly appreciated as well.

  above all external DVD players are manufactured by freecom

  You can find the driver cardbus, freecom for your 3500 here:
  http://support.toshiba-tro.de/tools/Portege/P3500/win-XP-TBE/CardBus-drv/CB-drv-P3500-XP-TBE-5135661-en.zip

  If you need additional drivers, you can find and download on the website of freecom (www.freecom.com)

• Satellite M - DVD/CD ROM missing in my device manager

  My computer for some reason unknown to me, recognize or load content on any DVD or CD that I put in my combo drive. The disc turns and acts like it is loading, but nothing happens. I want to switch from XP to Vista. whether a disk of music or a dvd movie disc, it always does the same thing. I have a satellite M45-S2652. I tried the registration procedure and nothing has changed. Before that, when I clicked in my device manager and everything was ok, he read "(MAT *** un DVD) RAM UJ - 831 S."

  I tried to use my windows recovery disk, but the computer does not recognize it. I tried the restore later, when I clicked in my device manager, under DVD ROM, I saw a bunch of script gibberish with a yellow exclamation point, but the same thing was happening. Y at - it someone who had that same kind of experience and solved. Will you please help me to solve my problem. I want to upgrade to Vista.

  Thank you.

  Try to remove the CD/DVD filters in the registry.
  When the associated CD/DVD (such as iTunes, Nero, virtual CD software), the software is installed, they install filters in the registry, which can cause compatibility problems.

  (1) run Regedit (start-> Run-> Regedit)
  2) navigate to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
  (3) in the right pane, delete the "UpperFilters" key and delete the key "LowerFilters".
  (4) restart.

  If your CD/DVD programs stop working, you will need to reinstall them (preferably with an updated version).

  This utility can remove the filters for you:
  http://www.CSD.Toshiba.com/content/support/bulletins/su2065061/RmvFltrs.exe

  If it still does not respond, you may need to replace the DVD drive

• Satellite Pro 6000 lost DVD/CD Rom drive after upgrade to win 2000 sp4

  Help, please! I have a laptop Toshiba SP 6000 and after download win 2000 sp4 on the internet have completely lost my CD-ROM/DVD-Rom drive. When I go to my computer and Device Manager it has a yellow I and following the warning "windows cannot load the driver that windows is unable to locate relevant data' and it has error code 31? I've been on the Toshiba site but don't know which update to take! I really need help.

  Hello

  Well, it the very strange question s. normally after the installation of the new operating system must be recognized the CD/DVD driver.
  I have studied in the web and find nice websites that describes this problem.
  Check this site:
  http://TechRepublic.com.com/5208-11183-0.html?forumid=89&ThreadId=181561&start=0
  http://support.Microsoft.com/kb/q270008/
  http://support.Microsoft.com/default.aspx?scid=KB;%5BLN%5d; Q314060

  Good luck

  Good bye

• Re: Tecra A9 - error 39 DVD/CD ROM/burner

  My DVD ROM worked fine until a few days ago. Have not used I downloaded Vista Service Pack and done a Defrag. Now, I get an error message saying corrupt posibly. I tried updating the driver but it says that it is up-to-date.

  How can I fix this please?

  Hello

  Please try to resolve it with this
  http://195.182.196.33/KB0/FAQ8101LA0000R01.htm