HP ENVY Sleekbook 6 B5Q40UA: Overclocking HP Envy 6 with A6-4455 processor

Similar Questions

• HP Envy 4520: Registration error of the HP Envy 4520 with Google Cloud print

  I followed the instructions to use settings in chrome to save my HP Envy 4520 with Google print clouds.  I get to the point where I went to the printer to press OK, it will display"add printer, then after a while, I get this error message:

  Was able to complete registration

  An error has occurred. Please check your printer and try again

  The printer using the WiFi.

  Hi greenturtle

  Thanks for your reply, but I'm not using the Chromebook.  I followed the instructions by using the settings in the chrome browser.

  I found another way to activate Cloud Print, so I'm OK now.

• Desktop 700xt HP Envy with intel i7 - processor image 4770 has a DVI connector port

  I bought a HP Envy with Intel i7 - processor image 4770 700xt and Windows 8.1.  I would like to know if this computer has a DVI connection charging port.

  Assuming that your 700xt want model has a back panel that looks like the one below, it has a VGA output (analogue only) and a DVI - D output (digital only);

  

  #4-VGA (analog only) 5 - DVI - D (digital only)

• I use Envy 17 with a job posting and I need to be able to turn it on even if the lid is closed? Thnx

  Hey! Regarding my HP Envy 17 1085 eo. I use my Envy 17 with an external display, and I have to be able to turn on my pc, while the cover is closed (clamshell). It is possible while the pc is in "standby", while activating the mouse keyboard og - but Windows break mode standby after a certain time, leaving me frustrated as I then need to open the lid of my desire and press the button 'walk', to use the Windows. Is it possible somehow? Thank you very much!

  Hey dhalb_,

  Have you ever watched the Power Options window (start > type 'power' > click Power Options) where you can change when the computer sleeps (left)? As long as you stop the computer periodically (2 - 3 times a week, if you use it every day) it would be nice to never go in "standby mode" while it is plugged.

  For a while, I used a laptop as a desktop replacement with an external monitor and ran into the same frustration as yourself. I shut down my computer after each use if so I came up with a scheme where I could leave the screen all half open, just enough to be able to press the power button.

  If you prefer to go in standby mode, you can go to the advanced power settings (Power Options > change Plan settings next to the selected power management > change advanced power settings), extend your sleep and set "Hibernate after" connected to never by typing 'Never' in the field minutes. Click on apply and OK.

  I should mention that it does not extend the life of your computer to run constantly. Hard drive failure and the motherboard issues sees much more often on machines that are constantly running. Computers bogged down and run slowly when the memory is full. Memory erase them and will reset when the computer is turned off. Here's a link explaining more on the accumulation of memory and aging of the material.

  I hope these suggestions help. Please let me know if you have any questions.

• HP Envy Ultrabook with Windows 8.1 - battery not charging not even if hooked up

  Just recently, my HP Ultrabook stopped the same battery if connected to the power source. Also when I remove the power connection, the laptop gets off immediately, it means that there is 0% charged battery.

  On the battery it monitor shows "40% available (plugged in, does not support). " I tried several things like turn off computer, connect to another power outlet etc but no luck. Since it is Ultrabook with envy, I can't remove the battery.

  Help, please!

  Thanks in advance!

  Did you run the test component UEFI PC diagnosis for the battery?

  Start button / stop--> immediately tap the Esc key--> when the start menu is called, press F2 to select the UEFI PC Diagnostics and then select test component--> battery.

  The battery can be removed and replaced if the diagnosis says that he didn't. Instructions to do this are in the sleekbook on page 43 Mintenence & Service Guide .

  I found the battery on sale on Amazon.com. I found it a bit expensive. Use Google or another search engine shop for a good price on the HP 681949-001 original part number

  http://www.Amazon.com/HP-681949-001-battery-primary-EL04052XL-PL/DP/B009SOIC8G

• WANT 5540: Compatibility of envy 5540 with OSX Sierra

  Hello

  I just bought a 5540 envy and it's a nightmare, trying to get it to scan using computer scanning (TBS). Sometimes it works sometimes it doesn't. He worked earlier ebven today while STC has not been activated and utility HP reported that nothing could communicate with the printer.

  I tried to download the update of the firmware that has been issued on the 18.10.2016, but it wont load because its telling me the printer is in error.

  I deleted and reloaded the software six times and participated in two chat sessions, when technicians online, even with control of my thing, can not solve the problem. One of them asked me to move the printer within ten feet of my itinerary. I did, and the thing that worked until I rebooted the IMacwhen it has stopped working.

  Please help because my patience is running thin, and after more than 25 years of use HP stuff this thing becomes very close to be thrown in a dumpster and replaced by a Canon...

  Welcome @9191rogerm,.

  Thanks to their participation in Forums of HP! By your post, I see that you have intermittent scanning computer problems on the Sierra. I can help you.

  Are you able to scan from the Mac on the network?

  I would like to know what software you tried.

  If this is not the case, try a USB connection. Let me know if it worked.

  Try connecting the USB cable to see if you have the same problem or USB connection.

  "Check that the ' enable scanning to computer" is always on.

  • Scan network connection is lost (Mac).

  Feel free to click on the button 'Accept as Solution' and the 'Thumbs Up' for my help. Please let me know the results and if there is anything else I can help you. Thank you!

• Envy to 110F D411: scanning envy me with Mac.

  Scan to computer (MAC) was Ok when I first bought envy 110F D411 model SNPRH-1101

  Now, I'm not getting a connection, can't activate the analysis on the MAC,

  Commputer not found shows on printer

  It doesn't seem to be a driver for my model D411 only D411a etc.

  I tried D411a but doesn't seem to help

  Include D411 and my model number is not as a product

  total inability to get any interactive help on the Web - it does not seem to exist

  Hey @tony59, thank you for taking the time to join the forums of HP, I would be happy to help you! I understand that your scan of the computer was working before, but now you can not establish a connection.

  We will restore the printing system, repair disk permissions and add the printer:

  Reset the printing system

  1. Click on the Apple icon and then click on System Preferences.
  2. In the hardware section, click on Printers and Fax/Scan. The Print & Fax/Scan dialog box opens.
  3. Do a right click (or Ctrl + click) in the left panel and then click on reset printing system...
  4. Click OK to confirm the reset.
  5. Type the name and the correct password.
  6. Click OK to reset the printing system. The printers and Faxes dialog box shows any selected printer

  Note: This will remove all printers in the print and Fax/Scan, any printer deleted can be re-added later by clicking the sign plus (+) symbol.

  Fix permissions of the drive for 10.10 and lower

  1. On the Dock, click Applications, then utilities.
  2. Double-click disk utility.
  3. Highlight your hard drive / partition on the left (by default this is "Macintosh HD").
  4. Click repair disk permissions at the bottom of the window.
  5. Once the repair is complete, restart the computer and download and install the printer HP for OS X drivers.

  Fix permissions of drive to 10.11 El Capitan

  • Click on your desktop so that it is written next to the Apple Finder icon, and then click OK (you will see this next to the Finder after file, edit and view).
  • Under Go, click Applications.
  • In Applications, select utilities.
  • In the Utilities folder, you will see disk utility, double-click on this icon to open the disc utilities.
  • Click on your hard drive, and then click first aid. Click OK to allow it to run.
  • Once the repair is complete, restart the computer and download and install the printer HP for OS X drivers.

  When you add the printer, please ensure that you use the HP driver.

  1. Select Add another printer or Scanner
  2. Select the printer that you add, and next to the 'use', you can select the printer driver

  Please let me know if that solves the problem by clicking on the accept button Solution below. If the problem persists, let me know and I will do everything I can to help. If you need assistance, please indicate your version of Mac OS X on your answer, thank you.

  See you soon!

• WiFi HP ENVY 4500 with several Access Points - same SSIS Configuration

  Hello

  We just got a HP ENVY 4500.  I have a main homenetwork with a wifi Modem/Router and an old router acting as an Access Point to the floor to extend coverage.

  Both have the same SSID and password and are set to different channels.

  My HP ENVY 4500 fails to connect when the Access Point is lit.

  It will connect with it.

  Once connected, I can turn on the PA and all is well.

  The two router an AP using WPA-PSK/WPA2-PSK encriptación

  The router (that it connects to) should have a better sgnal when both are on, so I do not understand why they need the AP to be turned off to connect.

  Any thoughts people?

  Eserim

  I think he has always had problems with several access points.  Try this, what ever AP is closest to the printer, set it to channel 1.  Then try channel 11.  Try now.

• HP Envy dv6 with Qualcomm Atheros AR9485 wireless issues

  Hello! I have a few questions on a computer I bought recently, HP ENVY Notebook PC, number of product B5Y66AV dv6 wireless. The internet speed is much slower that it should be and also randomly disconnects / reconnects, a problem that I didn't with my previous laptop. It is not a problem with my router; all my other wireless devices, including other computers, work very well. I tried to install the new driver updates, updated the BIOS, tweaking Power Options, all to nothing does not.

  The first three days I've had this laptop here are no problem at all. The internet worked very well, and everything was fine. The issue only began to appear so.

  My network card is AR9485 of Qualcomm Atheros 802.11b/g/n WiFi Adapter. I'm running on Windows 8.

  Hi Kiydon,

  Take a look at this document and try the troubleshooting steps to see if it helps to solve your connection problems.

  Please let me know

• HP Envy 14 with graphics switchable

  Hi I have an Envy 14-1011NR I upgraded to Win 8 Pro 64 bit. I could find the drivers for the graphics card, AMD and Intel chipset and install both. The switching part is what does not work. Even if the Catalyst Center lists/offer menu an option to switch graphics it is not working properly. Once I change, the display will be blank until I have 1) connect to an external monitor or 2) select 'extend' in the options of Windows P of multiple screens. When I look at the screen resolution Control Panel it shows a monitor for the AMD and an Intel card, so I think the latop think two monitors are connected.

  When will an official HP driver available?

  Otherwise, everything else works great!

  Hello

  Please visit this link and enter your product number.

  If you see information that HP has not tested Windows 8 on this model, so it will then mean HP realease no Windows drivers 8 for this model

• M6-n010dx Notebook PC ENVY: dealing with recovery D: drive

  ENVY m6-n010dx Notebook PC

  Earn 8.1 64-bit

  

  (1) what is here is not necessary, and I can change it?

  (2) how I stop it all any bigger?

  (3) what are the consequences if I stop it more?

  (4) can I copy off the coast on a sufficiently large USB for purposes of recovery and recover the almost 30 GB of disk space?

  Thank you!

  @beckinista ,

  Thanks again for posting back.  All I can say here is that some how a setting has been changed in the configuration of your system that started warnings.  Here is a link that may help.

  How to remove the warning of low disk space

  I was found with in many recent microsoft updates in the lost little time.  Change in configurations that require the user to know how to use and work with the operating system much more than the standard user.

  Some of the changes with Windows 8.1 made changes in security, management of feeding and browser settings that are easy to fix, but only if you know your way around a sort of operating system under the hood compared to the standard user.

  In most cases, you can correct many of the changes by turning off updates or the manual making them so that when they come to you can look them up and see what they do.

  After that, a Windows system restore before you notice any changes will help as well for the most part.

  I hope this helps.

  Thanks again for posting and have a great day.

• HP envy 5664: hp envy compatible with hp pavilion chromebook 5664

  My HP Pavilion Chromebook will work a HP Envy 5664?

  curryfan30 wrote:

  My HP Pavilion Chromebook will work a HP Envy 5664?

  Hello

  Yes, please use the following configuration

  http://support.HP.com/au-en/document/c04122530

  Kind regards.

• HP Envy 15 with Ralink RT3290 loses wireless n If windows updates 8

  I have a HP Envy 15-j040eo that has worked well until about two weeks ago, but there is no longer recognized my wireless-n. At this time, I win 8.1 64 bit with automatic updates. Other computers and iPhones is always recognized my wifi.

  After spending hours and days with the support of HP, we finally did a complete reset of the computer. Now I have Windows 8 with the works of disabled and wireless-n updates very well until I allow windows to date. If windows is allowed to update the computer does nor recognize the network. With other networks - n or with cable it works fine. The only way that the HP Support and I found get wifi work is to reset the computer. If I only update the wifi still doesn't work.

  The wireless adapter is a Ralink RT3290 802.11bgn and it works with the driver 5.0.25.0 on windows 8. When I had first of all the question I tried to update driver V5.0.46.0 but he still has not found the wifi-n in windows 8.1.

  BIOS is updated to the latest version and even if I turn auto updates of the network was cut when the upgrade of Windows 8 to 8.1 but on Windows 8 it works until I decide not to update the wireless adapter driver.

  As I'd rather have 8.1 and updated windows up-to-date with automatic updates; How can I configure to always work with wireless-n?

  Hi PMR.

  Welcome to the HP Support Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I understand that you have problems with your card wireless after the upgrade to Windows 8.1. I'll be happy to help you with that. One of the things is recommended when upgrading is deleting or disabling all USB devices one thing that many people do not know is that the wireless card uses an internal USB connection. So, before you upgrade either your device manager under network adapters find Ralink RT3290 wireless adapter. Then right click and select Disable. With the wireless you will need to connect via Ethernet temporarily. Once the update is completed, activate the card and install this driver Ralink RT3290. Give that a try and let me know how it goes.

  Thank you

• HP ENVY m6-n113dx Notebook PC: new installation of Windows 8 on HP Envy and with problems of drivers.

  I have a laptop HP Envy M6 and it came with Windows pre-installed on it 8.1. I always do a new installation of Windows, whenever I have buy a laptop that I hate all the bloatware and stuff which they pre-install on it.

  Unfortunately, when I did, I found that the drivers on the HP website do not work for some things, especially my wi - fi.

  In Device Manager there are three things that make their appearance as having a problem:

  Network controller:

  PCI\VEN_168C & DEV_0036 & SUBSYS_217F103C & REV_01

  Unknown device:

  ACPI\VEN_HPQ & DEV_6001

  Unknown device:

  ACPI\VEN_HPQ & DEV_6007

  If anyone can provide me with some drivers work, I would be incredibly grateful. I called HP and they told me all I can do is to pay $40 for a CD delivered to me so I can reinstall the version of bloatware, and I really want to do. I want to use my real version of Windows 8 and not pay for something I don't even want.

  Thank you!

  Nevermind, I fixed it myself by reading old son of Paul_Tikkanen

  I used http://www.pcidatabase.com/index.php

  and found the diver that I needed, and now I don't have to pay $40 for the version of bloatware.  Yay!

  Thank you Paul!

• Of all-in - One HP ENVY 23-o014: Replacine the processor...

  Hello. How do I remove the back cover of the LCD, so I can replace the processor in my HP ENVY 23-o014 All - in - One desktop PC (ENERGY STAR)

  Thank you...

  Hello @britlord,

  I understand that you are looking to replace the CPU on your desktop computer, and I'd be happy to help you in this case!

  If your computer is still under warranty, please contact our technical support for further assistance in this matter by clicking on the link below to get help from your region number.

  www.HP.com/contacthp/

  If your system is no longer under warranty, please following the steps below to remove the rear LCD of the coverage:

  Remove the door from the CSR

  1.) place the computer face down on a smooth flat surface, ensuring support is not hung at the edge of the table.

  2.) lift the stand to its vertical position, so that the bottom of the stand is parallel to the table surface.

  3.) drag each lock that fix door CSR to the computer toward the Center.

  (Slide 4). CSR to the bottom of the Assembly of the door down and remove it from the computer.

  Remove the back cover

  (1.) the two captive torx screws near the lower part of the back cover.

  (2.) continue to unscrew the screw until each of them makes a clicking sound and the screw completely discards.

  3.) apply a good amount of pressure on the back of the rear cover while pulling on the edges of the cover. This should help release all tabs on the lid, along its outer edge.

  4.) lift the cover diagonally to clear the stand. Carefully remove the cover from the computer.

  Remove the memory cover

  1.) squeeze the release latch for the cover of the memory until it the lid pops up.

  2.) remove the cover of the computer.

  Remove the EMI Shield mother board

  1.) remove the three torx head screws which fix the shield EMI of motherboard on the desktop. Each location of the screws is indicated by a template of an arrow with three circles on the inside.

  (2.) the nozzle upward the inside edge of the shield and remove the shield completely from the computer.

  Remove the thermal Module

  1.) remove the four screws torx in captivity on the processor in order indicated by the labels on the thermal module templates.

  (2.) to detach the system head torx screw at the end of the thermal module radiator.

  3.) be careful to lift the thermal module of the computer.

  Remove the processor

  1.) press down to release the lever of the retention pin CPU load and then back.

  2.) lift the load off the Jack plate.

  3.) take note of #1 Pin of the connector of the brand in terms of the size of socket. You will need to align the corner pine #1 the Intel CPU removal tool. This tool is needed to prevent unnecessary damage to the processor or the components surrounding it.

  4.) press the piston of the removal tool to pick up the CPU of the socket.

  5.), turn off the tool and the CPU of the system board.

  Please re-post if you need extra help, in addition to the steps. I look forward to your reply!

  Concerning