laser 2605 printer will not configure Ip address, auto configure

Similar Questions

• HP Envy 5530: Emits a light HP Envy 5530, but the printer will not be running

  Printer of opportunity, so no guarantee: it out of the box, plugged in and set up. I was able to connect wirelessly to my computer, but I don't have the right to ink cartridges. When the ink is right, I plugged it again. This time the printer power not on at all. The only thing that happens is that the signal power light briefly when the first powered. This isn't a loose thread, because I can only duplicate the symptom when connecting, not when moving or unplug the device. It isn't food, as I have him succeeded and get the same exact symptom. (PS, thanks for the power supply internal easy-to-swap!)

  Is it a kind of fashion 'sleep'? Any suggestions as to what this is. I am rather stuck with it since I bought the ink and an additional power supply, so I would like to address them. Help, please! Thank you!

  Hello @azvlr,

  Welcome to the Forums of HP Support!

  I understand you are having feeding problems with your used HP ENVY 5530 e-all-in-one printer. I see that you have already installed a new set of ink and replaced the internal power supply without result. Unfortunately at this time if a new power supply fails to solve the problem of flashing light output that the next step would be to use the printer.

  Please take a look at this paper Support HP "no power" to ensure that all steps are completed that follows: The HP printer will not be running or to respond when the power button is pressed

  The HP Envy 5530 is always a newly released product. Therefore, I highly recommend contact our telephone Support queue to explore additional options. If a replacement printer is necessary food and ink will not be wasted because they can be used in the replacement printer.

  HP Technical Support can be reached at the: 800-474-6836.

  If you do not live in the United States / Canada region, please click the link below to get help from your region number.

  Worldwide contact HP

  Regardless of the status of the guarantee, please call and see what additional options can do for you. I wish you good luck!

• HP Deskjet F2210 printer will not print my documents with the exception of my e-mail highlighted

  HP Deskjet F2210 printer will not print my documents with the exception of my e-mail address highlighted who is on the document, it is not cartrages, as it will print one page black and multicolor of the internet. Help, please.

  If you found problems with print quality with the only printer without printing from the computer, then it is a hardware problem.

  You may need to contact HP (1800-474-6836) support. Looks like a print head may be bad or needs to be cleaned manually. I don't think that this printer has a detachable printhead to clean manually.

• My PS6520 wireless printer will not print when she goes to sleep, any idea? Thank you

  My PS6520 wireless printer will not print when she goes to sleep, any idea? Thank you

  Hi 464544,

  Welcome to the Forums of HP Support! I understand once that your HP Photosmart 6520 starts in mode "sleep" you cannot send a print job, it does not automatically standby upward.

  Please take a look here:

  The printer into standby mode after five minutes of inactivity to help reduce energy consumption. The sleep time can be changed from the control panel. The printer will wake up mode 'sleep' to print when a print job is sent to it.

  However, the auto power off feature must be disabled. Auto Power-Off turns off the printer completely, you must use the power button to turn the printer back on. You can change the setting Auto Power-Off from the control panel. configuration -Source

  Menu Configuration > other Menus > Eco > auto shut-off > off

  I hope this helps.

• Printer will not connect via USB

  HP lj1022 printer will not connect not not via the USB port after the installation of the new driver upgrade hp lj1020/1022 for Windows 7 (64-bit). Driver seems to install properly until the moment where he is asked to connect the USB cable. Then he hangs up. HP lj 1020 printer appears in the display to the dashboard as the default printer. Computer recognizes the printer as hp printer lj1022 but in another "device not specified Panel when and only when the printer is on and the USB cable is connected." When printing, nothing ever comes from queue.

  Diagnosis is only that something is stuck in the queue and remove the task from the queue, but does not. Diagnostic shows no problem.

  The lj1022 printer accepts data from two other computers, as well on Windows xP and using the same cables. Three other USB ports have been tested on the new Windows 7 computer without results. The USB ports on the Windows 7 computer accept keyboards, mouse and flash memories wireless dongle without problem. The Windows 7 computer also sends data to a printer wireless with no problems.

  Hi Rmhodgson,

  Run the following utility below.

  http://support.HP.com/us-en/document/c02073861

• HP Officejet 6500 a: printer will not connect to the wireless network.

  I got this HP printer for a while and it worked fine.  Our old router is out and we had to get a new one.  Installed perfectly and printer continued to work properly.  The password for the router was ridiculous, that's why I changed it to something much more simple to remember.  Since then, my printer will not connect to wireless internet.  I have a ~ and reinstalled the printer but still have the same problem.  I thought maybe to try the former password would, but who does not work either.

  Anyone has any ideas that might help before chuck it and go and get a new one altogether?

  Thank you.

  Easy things first.  Turn off the router and the printer.  Turn on the router and wait 3 minutes.  Turn on the printer and see if it connects to your router.  Status?

  If no joy, temporarily disable all security in the router.  Now try to connect the printer to your SSID not guaranteed without password.  Status now?

  If OK, go back and add WPA2-AES with your simple password.  Status now?

• E-all-in-one HPOfficejet 8600Pro printer will not now speak to iMac since updates Driver & Maverick

  I just bought a new HP printer and set up on my iMac to print. After a LOT of messing around FINALLY got it works, BUT a day later upgrades arrived to update my iOS X 10.9.3 with a simultaneous upgrade of the software driver for the printer. I duly installed at once – but now, regardless of what I do the printer will not work. The computer can be seen as it is showing ink etc. levels and said he printed and I can print test pages, but it has not allowed me to print from Word, Excel, Web or PDF!  I tried to uninstall the printer drivers and reinstall those of the HP Web, which I suppose would be the 'old' - but still no luck. I need this job and am close to tears - any help would be appreciated. I also tried deleting and reinstalling Office for Mac... NB it prints beautifully and effortlessly to my husband's PC.

  Welcome to the LAG54 forums,

  I saw your post about not being able to use the printer completely after a few updates. I will do my best to help you with this!

  First, try the following steps:

  1. Mac OS X: how to reset the printing system
  2. Repair disk permissions
  3. Restart your computer
  4. Add the printer: full function and driver-OS X 10.9 Mavericks software

  I hope that does the trick! Let me know the results!

  Have a great Tuesday

• After the upgrade to OS 10.11.2, Mac Mini is so slow that it can take an hour to operate and the printer will not scan.

  After the upgrade to OS 10.11.2, Mac Mini is so slow that it can take an hour to operate and the printer will not scan.

  When you see a beachball cursor or the slowness is particularly bad, note the exact time: hour, minute, second.

  These must be run as administrator. If you have only one user account, you are the administrator.

  Run the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  The title of the Console window should be all Messages. If it isn't, select

  SYSTEM LOG QUERIES ▹ all Messages

  in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu at the top of the screen bar.

  Each message in the journal begins with the date and time when it was entered. Highlight date back to the time you noted above.

  Select the messages entered since then until the end of the episode, or until they begin to repeat, whichever comes first.

  Copy messages to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

  The journal contains a large amount of information, almost all this is useless to solve any particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

  Please don't dump blindly thousands of lines in the journal in this discussion.

  Please do not post screenshots of log messages - text poster.

  Some private information, such as your name, may appear in the log. Anonymize before posting.

  When you post the journal excerpt, an error message may appear on the web page: "you include content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

• My HP Photosmart C4100Series printer will not remove a previously requested printing package, and is now stop printing of other things. How to rectify it please?

  I was printing a document from page 52, and then discovered that I was not necessary. After printing, the printer will not remove the print request, therefore it prevents me to print other documents. How can I correct this?
  I turned off the printer, but nothing helped.

  Thank you for your help. Very useful, but I had already found the doctor of scan HP printer on the internet and it was so simple to use and also corrected the fault in a few seconds.

  However, once more, I thank very you much.

• My HP Photosmart C309g-m printer will not print after that automatic updates have been made last night.

  My HP Photosmart C309g-m printer will not print after that automatic updates have been made last night.

  What can I do?

  Printer in Windows problems: http://windows.microsoft.com/en-us/windows/help/printer-problems-in-windows

• MX330 printer will not print. power WiFi ok

  I CHECKED POWER and telephone lines the printer will not print, the printer is not reconigzed

  Hello

  • What version of Windows are you using?
  • What were the changes made before the problem occurred?
  • You receive an error message when printing?

  You can check these links:

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Why can I not print?

  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print

  See also:

  Network printer problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems

  Note: this link also means on Windows 7

• Printe will not print. Says that 'the printer door is open', but no door is open

  Printe will not print.  Says that 'the printer door is open', but no door is open

  Hi ElliotBrahms,

  1. What is the brand and model of the printer?
  2. what operating system is installed on the computer?
  3. you have made no changes to the computer before the broadcast took place?
  4. when exactly you get this error message?
  5. What is the exact error message you get?

  Method 1
  Try the steps from the following link:

  Printer in Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows
  
  Method 2
  Try the steps from the following link:
  Solve printer problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

• HP officejet pro 8600: printer will not be used with the document in the queue

  Hi people,

  can someone help me please?

  I tried all the solutions proposed-

  Check connectivity

  restarted print queue

  Remove and then reconnect the printer

  Power reset

  Cancel job again.

  I had this problem before, but something so tinkering with the queue got fine but nothing works all the time.

  I just changed the cartridges...

  No matter what other dieas welcome please

  Ashoka

  Ash,

  I could be wrong, of course; Mac is not liable for the same way as the Windows environment.

  The printer can print when the print queue of the printer is on, ready to accept a job.  If the queue of work, i.e. the service on the printer running print jobs does not print to the printer, the printer will not print the work.

  If the printer on the computer service is not to blame, then you might indeed want to accuse the printer to not receive the work.

  You can check the communication between the printer and the rest of the installation between the printer and the service that sends the work to the printer:

  You could try to put everything back once more - to include your router.

  I hope this helps.

  Maybe someone with a Mac experience can shed light on the issue.

  Click on the Thumbs - Up Kudos to show that you appreciate the help.

  I am happy to provide assistance on behalf of HP. I do not work for HP.

  Click on accept as Solution when the answer provides a fix or a workaround!

• Updates will not configure Win 7 64 bit

  Windows Update will download updates of Win 7 will not configure them. After the reboot it will configure at 15% and then I get an error message that says: "failed to configure updates. To eat.  Windows 7 64 bit

  I sent a support email, but they cannot understand it. How can I overcome this?

  OK, I thought about it. I installed all the updates of security and then installed all updates of system at a time and they have all installed.

  Thanks for all your suggestions.

  Jerry

• According to the set printer wizard, my new printer software has been installed, but the printer will not appear on the section 'printers and faxes '.

  You have a printer again, with installation CD. According to the set printer wizard, my new printer software has been installed, but the printer will not appear on the "printers and faxes" section in Control Panel. Model of printer - Epson XP-200.  Have a Dell, Windows XP.  Help!  Not even sure who to ask...

  What version of XP (Home, Pro, Media Center) and service pack (none, 1, 2, 3)?

  Printers and faxes is totally blank?

  Open a command prompt window (start > run > cmd > OK)
  Type the following in the black command prompt window and press enter
  spooler request SC

  You should see something like this:
  Service_Name: Spooler
  TYPE: 110 WIN32_OWN_PROCESS (interactive)
  STATE: 4 RUNNING
  (STOPPABLE, NOT_PAUSABLE, IGNORES_SHUTDOWN
  WIN32_EXIT_CODE: 0 (0X0)
  SERVICE_EXIT_CODE: 0 (0X0)
  CHECKPOINT: 0X0
  WAIT_HINT: 0X0

  What is the 'State' displayed for you?

  Open the Services applet (start > run > services.msc > OK) and scroll down to "print spooler".  The status should be started and the Startup Type should be automatic.  What are the parameters of your correspondents?  If your print spooler is stopped, you can try to launch it by clicking on the link, but I suspect that it stops again.  Please report the results of your efforts.