Message "Capture Device Offline.

Similar Questions

• Camera connected but still showing "Capture Device Offline"

  Hello

  2 weeks ago, that I used the capture feature in Adobe first CC for the last time, with no problems. Yesterday I tried to capture a video cassette again, unfortunately not the capture window to say "Capture Device Offline". I can control my camera (rewind, playback, front, etc.), but just cannot click on the record button.

  I use the latest version of Adobe first Pro CC (automatically updated 19 days ago) and I'm trying to capture with my camera Sony FX1000.

  There are 3 days, my PC downloaded automatically updates Windows 10. This update is perhaps responsible for my problems?

  Thanks in advance,

  Justin

  From the Netherlands

  

  Hi Justin,

  The first thing, in the first of the Capture settings, make sure that it is set to DV or HDV you like to match the band being captured. The transport controls are the same for either, but the video data are very different between HDV and DV. That's why you can have control, but no video, the format is incorrect.

  The next thing to check - will record your DV or HDV camera. Windows detects DV and HDV cameras as two quite different. This same thing happened to me before - can control the camera, but no image. This is because the PC "thinks" he's talking to a DV camera when it is really a HDV tape you play, or vice versa.

  Look in the menu of the camera - you should see options to set the unit of "DV, HDV or Auto. I think it's under the option 'VTR '. Unit must be in VCR mode to see this option, not fashion ENR. Choose the setting to match the tape you want to capture, DV or HDV. Do it with Firewire disconnected from the PC. This will "force" the camera to DV or HDV output via Firewire. Turning the camera off, 1394 connection, turn on the VCR mode. Windows will beep when the camera connects and don't know what will do 10, but Windows 7 always put a small message at the bottom right of the screen. DV camera would say 'Caméra DV' and 'HDV' Save as "Subunit STROKE".

  If this does not resolve the problem, you may have to resort to using the Legacy 1394 driver in Windows. http://www.studio1productions.com/articles/FireWire-1.htm

  Follow these steps should help you back in business

  Thank you

  Jeff Pulera

  Safe Harbor computers

• Capture device offline help?

  When I go to try to capture video and audio on my Adobe Premiere Pro CS5.5 on my laptop, but when I'm going to do, it says Capture Device offline, and no matter how much I am looking for I know not what it means. I'm not tech savvy so please help?

  All versions of first (Pro and elements) will capture only from a Ribbon ADHESIVE or VCR camera using a scanning (see below) device that is connected to a Firewire port on the computer

  If you don't have such a device, or a Firewire port, you cannot capture from a camera to tape or VCR

  http://www.grassvalley.com/products/advc110 to digitize analog, as video from a VCR

  Amazon http://www.amazon.com/Grass-Valley-Canopus-77010150100-Converter/dp/B00030ATTO

  If you connect a digital camera via USB, you use your computer, the file manager for Windows (or, I think, Finder for Mac) to copy it to your computer's hard drive

  Metadata is in the http://forums.adobe.com/thread/1015001?tstart=0 folder

  -http://helpx.adobe.com/premiere-pro/using/transferring-importing-files.html

  -http://helpx.adobe.com/premiere-pro/using/importing-assets-tapeless-formats.html

  CS5-thru-CC body/Encore tutorial list http://forums.adobe.com/thread/1448923 has many links to help learn

• Capture device offline (Blackmagic DeckLink Studio 4 K)

  Just getting a new computer with 64-bit Windows 10. I use a Sony Vegas Pro 13.0 try and capture works very well. I close Vegas and load up Adobe Premiere Pro CC test, but the capture does not work. I get "Capture Device Offline".

  I use a Sony Handycam HD with HDMI, go to the map of the world BANK. I have the latest software/drivers for the card of the WB. As I said the Sony product works, but Adobe does not work. How Adobe that I buy a product that does not work.

  I tried to change the camera's 720 p, 1080 p and same 480i HDMI output modes. I tried DV and HDV settings in the software also. Hard, trying to find a page of diagnosis in the settings of the acquisition card, you know, like Skype from your webcam. But the only real parameters are "DV" or "HDV".

  Some help would be appreciated.

  You re - install the decklink drivers after installing the first test?

• Message to "Capture device offline" when you attempt to add additional clips from HDV camcorder, in CS5

  "Device capture offline" message when you try to add additional clips to an existing project in first Pro CS5.5.2.

  Previous capture has been accomplished, but, then, in trying to add additional clips of the same device, it failed.

  Every 40 minutes of excerpts of 185 was initially captured by using Sony Vegas Platinum 11 Moviemaker, without error. Additional clips of mt2 were then imported successfully into Premiere Pro after indexation, which conform clips, and they play perfectly well and high quality CS5.5.2 at 1440 x 1080i.

  Why the Capture device would be offline, where no physical alteration has been made to the equipment?
  

  Jeff,

  I'm now back at the base. Checked the anamorphic HDV on the server of the Studio and he was a con man, tired cable, the M6600 like me after spending six hours at an airport in China.

  Replaced cable and everything is fine.

  Thank you to all who tried to help.

  Bob

• Device offline in EP 3

  I use PE 3 years on my old Windows XP PC.  I'm trying to make it work on my laptop which is now my main computer. The laptop uses Vista. Install goes OK, but when I try to capture (with a Firewire connection) I get the note "device offline.  In the section of the device menu options, "check state" says "Online".  I tried almost every combination of setting, but always the device in offline mode message keeps coming up.  I tried my setup again on the old PC and it still works on this machine, but I try to the commission because it is too slow.  Is there a reason well known for what works is not on the laptop until more date that I may have missed?  I know PE3 is old technology, but I love it and am used to it.  The laptop has only a 1.83Gh processor, otherwise maybe I tried to try EP 10, which requires at least 2Gh.  Thanks for all the responses you have ay. David.

  First of all, make sure that this program includes the hotfix that updates to version 3.02. Version 3.00 will not correctly work under Vista.

  Then manually, go to Windows Update and make sure that you have even updates not critical. Especially with Vista. These non-critical updates frequently include important driver updates.

  This is your best bet. However, one clocked at 1.83 ghz is not enough to make a montage with any version of the program, unfortunately. (Are you sure that's not a dual-core processor? I'm surprised even Vista will run on a clocked at 1.83 ghz!)

  You can also just edit standard definition video - ideally miniDV video tape - in version 3. You don't say what model of camcorder that you work with, but you may find it very frustrating to do any serious video editing on a laptop of low power. I'm sorry.

• Pavilion g6: I get the message "PCI device has not a driver" I don't know what to do.

  EHEN I run the trouble Shooter, I get the message "PCI device has not a driver" I don't know what to do. Can I get a link to load down even. This problem has prompted after a system restore.

  Hello

  Most as it is the PCIe card reader drivers. Please try:

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_133237_1 & swEnvOid = 4158

  Otherwise after return what its hardware id.

  Kind regards.

• Message: This device can perform faster if you connect high speed USB

  Hello

  I have a laptop Toshiba Satellite 2009 of Vista.
  I just bought a multimedia design Memup Feel of the disc hard 500 GB.

  My concern is that when I connect to my PC, I have the following message:
  + This device can perform faster. USB devices can be faster if you connect to a USB 2.0 high speed +.
  + To get the list of available ports, click here. +

  Then I have a list of ports in bold, but I don't know what to do with.

  How to solve my problem?

  Thank you

  Hello

  Are you sure that your laptop is Satellite 2009?
  I put t know this model of laptop.

  But I know that this error message; This message appears if you connect a USB 2.0 device to a slower USB port; That is, USB 1.1
  But I think that your laptop supports USB 2.0 ports either TI problem disc external HARD s or the issue of USB drivers
  Try updating the chipset driver you can also delete all the USB controllers and hubs in Device Manager ports. Restart the unit. After restarting again the OS would recognize all USB ports.
  Then try to reconnect the USB HDD

• Drive external hard USB - cela used to work now I get an error message = "this device cannot start. (Code 10) "Any suggestions?

  Drive external hard USB - cela used to work now I get an error message = "this device cannot start. (Code 10) "Any suggestions?

  Hello

  I suggest to refer to this link and follow the steps in this link and check if that helps:

  http://support.Microsoft.com/kb/943104

  It will be useful.

• movie maker error: a video capture devices are not detected

  Filmmaker gives the following statement. A video capture devices are not detected. My camera is plugged in and turned on. This has not happened before.

  What is it?

  How is it connected?

  Filmmaker works with mini camcorders dv connected FireWire, the firewire driver is installed by microsoft, you should not need to reinstall it, apart from a few special cases.

  This device and cable worked before?

  If so, what was the alst time and have you made any changes to the computer since then?

• I get the message 'the' device name' cannot be stopped because a program accesses still it."when using safely remove hardware program.

  Trying to read an external drive "Xcraft", by chance the power supply cable was disconnected. I ' v ereconnected the cable and try to remove the device using the ' renove safely» The unit is not stopped after selection and | I get the message 'the' device name' cannot be stopped because a program is accessed again. ' Y at - it patches or wrap-around work. Just, I can't access the drive. Appreciate any help.

  Try this and see if you can get it to unlock. If it does not just try to restart your computer without USB drive.

  The download is from Microsoft so it's safe!

  Good luck!  Please rate me upward if you find my post helpful. Thank you!

• Message: this device could better work with usb 2.0 when you connect the USB device.

  Original title: USB 2.0

  I get the message "this device could better work with usb 2.0", how do I change 1.0?

  I get the message "this device could better work with usb 2.0", how do I change 1.0?

  To answer your question directly: you replace with USB 1.0 (most likely USB 1.1) USB 2.0 by the purchase of new equipment.

  If you have a desktop computer, you can buy an internal with several Sockets USB 2.0 card.

  If you have a laptop, you can get a card with 2 ports USB PC Adapter 2.0

  Before you buy anything, however, if you have a desktop computer, it is possible that some (but not all) of your taken USB is 2.0.  Open the Device Manager (start > run > devmgmt.msc > OK), click on the + sign next to the category "Controllers of Bus USB" and watch the 'Host controllers' listed there.  If any host controller is 'enhanced' then you have at least one (and probably 2) USB 2.0 taken somewhere on the computer.

• Cannot read Photostory. Error message: "a device inthi system does not work.

  After building a slideshow Photo Story 3, I'm trying to play and get the error message: "a device attached to the system is not functioning:.»

  Unable to identify this device.

  Any ideas out there?

  Hi ld1925,

  • Did you the latest changes on the computer?

  Method 1

  I suggest that you install the updated drivers for the graphics card on the computer by visiting the manufacturer of the card or the computer manufacturer's website and check if it helps.

  If the update of drivers help not then uninstalled computer display card drivers, then reinstall the latest driver update.

  How to manage devices in Windows XP

  http://support.Microsoft.com/kb/283658

  Use Add/Remove remove programs and Device Manager to uninstall the drivers for the computer.

  How to change or remove a program in Windows XP

  http://support.Microsoft.com/kb/307895

  Method 2

  If the previous step fails, then it is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you put the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

  Method 3

  If the previous step fails, see if the problem continues in a new user account.

  How to create and configure user accounts in Windows XP

  http://support.Microsoft.com/kb/279783

• importing video WMM-"video capture device not detected...". »

  try to import my movies from my canon camcorder. When I try to import into WMM I get this error "a video capture device it not detected. check a device is turned on and connected to the computer correctly. I use my usb cable that I use with my canon photo camera. It allows to work with two cameras, now he's going to transfer the images from the camera but I get nothing of the video camera. do I need a driver? or a new usb cable for the video camera?

  When I try to import to corel DVD maker I get "no capture driver is available in the system.

  try to import my movies from my canon camcorder. When I try to import into WMM I get this error "a video capture device it not detected. check a device is turned on and connected to the computer correctly. I use my usb cable that I use with my canon photo camera. It allows to work with two cameras, now he's going to transfer the images from the camera but I get nothing of the video camera. do I need a driver? or a new usb cable for the video camera?

  When I try to import to corel DVD maker I get "no capture driver is available in the system.

  ========================================
  What is the model of your Canon camcorder? If records to
  media other than mini DV tapes, it will not import into Movie Maker.

  Also... USB is not the best method to download... Movie Maker
  has been designed to work with FireWire.

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Capture Device Driver evil run on the computer.

  Hello. I have a USB capture device that worked very well until I think it's the video editing software that it was bundled with the damn. I uninstalled the video editing software (was too big for my computer anyway) the device and its driver manager several times, but my computer won't recognize when I plug. The bubble of installation indicates that she installed correctly while Device Manager only lists it as an unknown device (he used to list by name) and properties manager says that a driver is not installed, while at the same time told me that the best driver that it is installed, it indicates also that it is plugged in audio wise with the chime you hear when you connect a USB device , but immediately after chimes that it was unplugged, even if it is not. What is happening here and how I might be able to fix? Windows recommends a replacement, but I hope it won't be necessary. The device driver manager is installed in the menu programs and features, and the USB driver is installed in Device Manager.

  Hello

  Please contact the Microsoft Community.

  I wish that refer you to this article for assistance more-

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

  We know if you need help.