new cartridge printer already more ink

Similar Questions

• With the new cartridge is already installed, I can't retrieve the set to the top of page to complete the installation.

  Hello, I have Norton antivirus and apparently everything is installed correctly but when I click the icon on the desktop after a very short time, the message appears.  I have an Acer Aspire V3 windows 8.1 - 64 bit

  I am trying to solve this problem since last week.  No change at all.  (I uninstalled all the components of the front range of HP printers)  The printer I have is HP C6250 all-in-one.

  I followed all the steps in the HP website and a couple of nights, it seemed that everything was working, when I prayed me to turn on the printer, one of the color ink cartridges more than ink and I could not finish the job.  With the new cartridge is already installed, I can't retrieve the set to the top of page to complete the installation.

  I thank very you much.

  Unless you have installed the full software from HP support features, none of the options on the cartridges of ink or HP Diagnostics will work

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&LC=en&product=3308554

  And if you bought "compatible" ink cartridges and not genuine HP that you receive msgs error cartridge like the habit of these cartridges compatible function with the HP software

• Put in a new cartridge printer and pages have little ink, some are not

  Just put in a new cartridge from the printer and I can see some of my printed sheets, but most of them is not readable. I remove the cartridge on a couple of times, but no go!

  Help!

  Thank you

  Please read this post then provide some details.  What printer model? What operating system? How is the connected printer - USB, LAN, LAN cable wireless, bluetooth? There the error messages on the computer screen or the printer?

• F4480 printer does not yellow, even with the new cartridge print

  I ran a diagnostic test and he said pan into the left chute has 1 or more lines short-circuited control.  Anyone know what to do?  It prints magenta and blue, but not yellow.  I tried 2 different cartridges and they are both the same.  (It is new).

  It looks like a mistake material Dorothy, the printer may be on its last leg. Try following the steps as much as possible of this document (do not buy more new ink) http://support.hp.com/us-en/document/c01670710

  If this does not work, I would contact HP support to see what options they can offer you: 1-800-474-6836 or http://welcome.hp.com/country/w1/en/support.html

• After installing new cartridges, printer icon says printer is off line. Tried to go in the passage of the off-line online, without any change.

  The printer itself doesn't seem to be the problem. Have disconnected the cables, and the message is offline, offline. Reconnect and he said just in offline mode. This makes me think that it is a software that I'm not waking up switching.

  I did the online diagnostics and he thinks that the printer is turned off. But it's not. Were do form here?

  "After installing new ink jet cartridges.

  The problem began after you opened the printer.

  I suggest you contact the manufacturer of the printer.

  See you soon.

  Mick Murphy - Microsoft partner

• HP psc1315 all in one: the NEW CARTRIDGE PRINTER ALIGNMENT

  To align a new print cartridge on my device I wonder to feed the pre-printed paper alignment in the feeder and press OK on the device. There is however no marked "OK" button on the device so what button I press? FYI twhen I tried pressing on the "on / Resume" button the printer simply disabled. Thank you.

  The alignment page must be loaded on flat glass, and then press the button of scan (blue) to complete your PSC 1315 printer alignment as shown in the paper here.

  

• printer does not recognize the new cartridge installed

  How can I get my HP deskjet printer to regonise I installed a new HP cartridge.

  Had to replace 2-magenta fine;  black photo (2 new cartridges tried) message-no ink.

  Have cleaned the contacts on the cartridge & printer. still no joy. What can I do next?

  Hello! Had a second go to cleanup & reinstall & all works well.

  Thank you!!

• HP Photosmart 7520 inserted new cartridges, toner ink drops photos

  My Photosmart HP required in new cartridges, I have inserted four new and the printed photos smeared ink; the ink is out on our fingers.  Put old cartridges check, printed in pink.  Reintegrated new cartridges, printed photos still smeared ink.  Please notify.  (I got these cartridges from the HP site).

  Hi @biblebabes,

  I understand that you have replaced the cartridges and the photos are forthcoming from smeared. I can help you with this.

  I have a document with a few steps to try to see if this will solve the problem.

  The streaks of ink fixing, faded prints and other common print quality problems.

  Here is information on how to manually clean the cartridges.

  "Ink cartridge problem," "Incompatible cartridge" or "Ink cartridge failed" Message Displays o...

  This document provides details to manually clean the print head.

  "Missing or doesn't have a printhead" Message appears on the control panel.

  What operating system do you use?

  Mac OS X: how to find which Mac OS X Version is on my computer?

  How to find the Windows Edition and the Version on your computer.

  Try to print on plain paper to see if you have the same results if you use a different type of paper.

  What kind of paper do you use?

  What have been the results of the diagnostic Print quality report?

  Good day!
  Thank you.

• Office Pro 8000: Cannot Print/Out of ink error even after installing new cartridge.

  When I tried to use my printer a few days ago, I received an error message "can't Print Can: ink" on the magenta cartridge.  I had used the printer a few days before and had not received a low ink warning.  It seemed suspicious to me that I would have received an empty cartridge error message without having previously received a low cartridge warning.  The cartridges yellow and cyan read 70% complete - all 3 were original cartridges.

  I bought a new cartridge 940XL magenta and installed according to the instructions.  Now, I get a message that the new 940XL cartridge is empty.  I can shake the old cartridge 940 and hear liquid inside.  Obviously, the new cartridge is also complete.  I tried to electric bike, reinstall the software, etc., without change of status.  If I swap back between the 940 old and new cartridge 940XL, they are correctly identified by type on my screen as the 940 or 940XL.  Because of the way the problem is presented, I don't think it is a cartridge problem.

  Of course, problem first awaken on May 8, and my warranty expired on 26 April.  Any suggestions?

  I solved my problem, what was obviously a lack of factory Assembly.  I looked inside my printer with a flashlight in the area where the ink cartridges are installed and found sprayed inside the printer magenta ink.  I disassembled the printer and found that the magenta line had been damaged during installation.  There are four tubes of ink that out by behind the ink cartridges, can do a U turn back toward the front of the printer.  Just after the bend, they do an another elbow top neighborhoods.  It is at this point that I found the damaged magenta line, directly above a screw on the right side of the housing of the ink cartridge.  The lines are in a very narrow passage and are held in place by several guards, moulded plastic.  It seems that the lines have been in place in the guardians, then the screws inserted from the top.  As I said, there is a tight passage, and it would be very easy to damage the line of ink right here if the lines have not been carefully selected to insert the screws when mounting.

  To solve the problem, I removed about 1/4 inch line damaged magenta ink.  I cut the line with a sharp razor, carefully to avoid collapsing the line or causing burrs to the hose.  I then placed approximately 3/4 "heat self-sealing tube on one end of the line of ink heat shrink.  Then I connected to the line with a small piece of plastic tube rigid of the handle with a swab of cotton, which was a perfect fit and comfortable on the line of ink.  Making sure not to cut the tube of ink or cause other damage, gently twisted the line of ink back until the ends have butted up inside the splice of cotton swab.  I then positioned the shrink tube over splice and it shrunk with a hair dryer.  Heat shrink tube, I used a hot melt glue applied to the Interior, which has helped more away making a watertight splice.  Again, it is not a lot of space, so the splice should remain small.

  I reassembled the printer, reinstalled ink cartridges and powered by the printer.  After the normal, long time running, I printed full color sheets and everything was fine.  Already that I had installed the cartridge magenta watch now that it is complete, and the remaining cartridges also read the levels they had before disassembly.

• My blue ink in HP Officejet Pro K550 does not print, even though I tried to put in a new cartridge.

  My Officejet Pro K 550 printer, has lost its ability to print blue ink, but I tried to change the cartridge. Other colours and black work well.  Can you give me any advice as to what may be wrong?

  Hi Linda,.

  I found some of my colleagues who have worked on this printer. There are some things to try, however, it is not all good news.

  The engineer estimated that on the print head nozzles may be clogged for 2 reasons. The first is that there is only some residue ink. Here's what he said: "perhaps you can suggest to the customer to try to remove the print head (just the print head which has cyan nozzles), use a cotton pad or damp cloth to clean the residue of ink around the nozzle. Replace the printhead, and then do the cleaning sequence that the manual says. This procedure might be able to recover some scenarios of nozzle clog, but he's going to use up little ink. »

  However, it may be that air took the print head: '. '. If the print head is deprimed, that means air penetrated in a certain room after turning on which can never be purged, causing not able to sink more ink. In these cases, I think that the print head should be replaced. »

  The engineer also spoke with assurance of customer, who believes that this particular product is past its end of life, which means that it is technically longer than Hp designed to operate. I know that you only had 3 years, but you want to be aware of this.

  Karen

• Xsays printer wireless HP 8500 needs new ink despite a new cartridge

  My HP 8500 worked fine until it ran out of ink.  I installed a new cartridge, but as soon as I got the same message (' replace the following ink cartridge - 940 ") returned to the top.  The display initially says 'detected real HP advance"before returning to the message"replace... ". ».  I thought that maybe the new cartridge was bad and later tried TWO new ones with the same result.  Technical support worked with my wife for 45 minutes, nothing helps.  We have tried hard reboots, have cleared the queue, etc., but still the same message.  Can anyone help?

  A moderator has moved this thread to Windows for the hardware and drivers Forum of feedback Forum.

  Hi, PVD_689,

  Check the ink levels.  Other cartridges can be low and the outbreak of this message.

  Start > type services.msc

  Press enter

  Scroll down to print spooler

  Right-click on it and select stop

  Wait for Windows to stop the spooler

  Close the window

  Clean the printhead Contacts according to the

  http://h10025.www1.HP.com/ewfrf/wc/document?cc=us&DLC=en&docName=c01609042&LC=en&product=3752456

  Replace the following empty ink cartridge message displays on the PRINTER after you installed a new cartridge

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c02005923&tmp_task=solveCategory&LC=en&DLC=en&cc=us&product=3752456

  Remember when you are finished to return to Services.msc and start the print spooler.

  If under warranty, contact HP for a replacement

• After you have installed the new cartridge HP do not print black ink

  HP Officejet 4620, Windows 7... installed new HP black ink cartridge and now it will not print black at all. I followed all the advice line in the help section, even cleaned the vents on the cartridge itself but shows only the white page. No error message is displayed. Diagnostic ran and says it all works correctly. Also cleaned printheads through 2 cycles still nothing. Any other suggestions? It was working fine before inserting the new black ink cartridge.

  Hi Teresa1960,

  Welcome to the Forums of HP Support! I see that you are facing some print quality problems on your HP Officejet 4620 you cannot print in black ink.

  You have completed all THE steps listed here: printer does not print black ink or color of ink or prints blank Pages, without success.

  Please note: there are three stages of print head cleaning. Three steps if necessary. If the print head is badly clogged, it may require another round of cleaning. If so, wait 30 minutes after the last step of cleaning (third) to start the first stage of the cleanup process.

  If you are unable to print in black ink, I think that the issue may be the printer and not the cartridge. I highly recommend call you our technical support at the 800-474-6836, I'm sure they will be able to help you regardless of the status of the guarantee. If you do not live in the United States / Canada region, please click the link below to get help from your region number. http://www.HP.com/cgi-bin/hpsupport/index.pl

  Thank you

• I have problems of black ink to print. It is gray very pale, even w new cartridge.

  When I installed the new cartridge is said that it is defective.

  Oh, OK.  Assuming that the ink is genuine HP, follow these steps:

  1. remove all the ink cartridges.

  2. lift the gray lever on the right side of the cart.

  3 remove and reinsert the printhead Assembly.

  4. replace the ink cartridges.

  If it does not, turn the printer off, then hold # and 6 keys while and for a bit after turning it on again.

• HP Photosmart Plus B210 Series new magenta ink cartridge prints do not at all

  First of all, I had a problem with my cyan ink on my printer HP Photosmart B210 series. The problem was that he was not the impression and he says it wasn't printing because of the cartridge and also I had to align my cartridges. Whenever I tried to align the cartridges he says that alignment does not so I ended up trying to align them so much that I have exhausted all my ink and went out to buy all new cartridges.

  When I installed new cartridges and tried to line up once again, they all worked perfectly, but when I went to print a photo, the magenta was not yet appear. I did another test called 'Print diagnostic Information' and the magenta box is completely blank 100%. When I went to see the "estimated ink levels" he said it was perfectly fine. I tried to print a picture of a square while magenta box and the printed page was completely empty.

  Basically... How can I get my printer to recognize the new magenta cartridge because it is not currently.

  I'd say running up to three cycles of cleaning the printer before driver or Panel box tools.  If this doesn't get the magenta, then you can try soak the print head, as described here.

  [edit] Know that the ink gauge is probably not at this point clear - especially the printer like that it has printed pages of magenta at this stage, while the ink is still in the cartridge.  The ink gauge will indicate less ink cartridges is actaully available.

• New Printer4630 print cartridge error

  During my first Setup after purchase, I get an error message on the printer screen that prevents me to fill out my online configuration.

  error message - incident affecting an ink cartridge - ink after the cartridge has to be replaced. -end of the error message.

  I removed and replaced the new cartridges several times but the error message continues to display.

  I've unplugged and replaced the power cord for a restart with no improvement.

  Hey @SteveMay,

  Welcome to the Forums of HP Support!

  I would like to work with you today to resolve the message 'Ink cartridge problem' on the front panel of your new HP Officejet 4630 e-all-in-one printer. I understand that you have already run through important steps of troubleshooting without result. I would recommend crossing the following step-by-step help document for this problem.

  A "cartridge missing" "Cartridge problem", or "Incompatible cartridge" Error Message for HP Officejet 4630

  Don't forget to reply to this post with the final result of your troubleshooting. Good luck!