Paper on the 6510 incompatibility error

Similar Questions

• 'out of paper' error message and there is paper in the printer

  I have a HP 1610 printer/Scanner with an "out of paper" error message  I installed a new cartridge, a few days ago, and the printer ask me to align the cartridge.  When I press 'OK' I get the error message "out or paper.

  I loaded and re-load of paper, checked the back door for a paper jam and still get the same error message.

  I removed and replaced the cartridge but nothing seems to work.

  I'd appreciate any help!

  Thank you.

  Hello bstew4447,

  Please follow the link below to troubleshoot the out of paper issue.

  No more paper

  Kind regards
  Jabzi
  
  Help the community by marking this post.
  Your question has been answered? Mark it as an acceptable Solution.
  See a great post? Give a Kudos!
  I work for HP

• error to load paper in the tray of the printer

  Although I have a lot of paper in the tray of the printer, my hp c309g-m all-in-one printer screen tells me to load paper, that is, the clip from the sensor to the rear does not work (the one with the Green Strip of rubbery material about it, I guess.) I removed and put it back on a few times, thinking it was wrong set, but it didn't work.  I cleaned the rollers, etc., too.  I try to use the same types of paper, I used for a year without problem.

  I have half of my book printed and don't want to change printers because the quality is not exactly the same thing. so, I would BE ESTATIC IF someone COULD HELP me to SOLVE THIS PRINTER.

  Thank you very much

  You need to contact HP about whether a repair is possible.  It is a hardware problem, not a software problem, and you can do that in Windows can ignore this error.

• With no paper in the tray, the printer has no error light. As soon thre is paper in the printer, I get error lights.

  Original title: what a printer problem.

  When no paper in the tray, my HP PSC 1400 no flash no lights error, however when the cartridge is mounted on the inside, it flashes error lights. As a result, I can't take a printout and I feel buried in the huge pile of unfinished work. The window so that HP behave as if they have nothing to do with it or the problem is bigger than their power; Well, I don't have to go, but to spread my shirt in front of you as if I'm begging!

  Contact HP support or post in the forums.
  What is your shirt has to do with it?

• HP Office Jet 4500 do not print due to error on paper, there is paper in the printer.

  I get an error that says I need to add the document to the printer.  The printer is full of paper.  I deleted the printer and re-installed, I closed the printer down several times, I rebooted several times.  I can put a paper on pc and press copy and it will copy in order to not mistake here for an out of paper issue. When I try to print anything I'm getting an error of paper output.  Help, please

  Hello NColyar,

  Welcome to the HP Forums!

  I understand that you receive a message indicating "on paper" using the Officejet 4500. I will do my best to help you! Please make sure that the printer is connected to a live wall, not a surge protector. I just want to check if that makes a difference.

  Then follow this document HP all-in-one is not get or paper feed. If you still receive the error message, please contact HP technical support for further assistance. Click here to read: worldwide Contact HP.

  Good luck.

• Error message 4 HP on PC paper\ \'out L', the paper in the tray

  My HP 4 L was working fine but now an error message on my PC shows "printer paper".

  Paper in the tray and inserted correctly checked paper tray, no document showing of lights and a test print when pressed high butten.

  Any ideas please?

  Hi BazzaofWatford,

  Glad to hear that you got the problem solved. Have a wonderful day.

• C5180 tells me that paper is the right size or type is incorrect.

  I have a photosmart c5180 all in one. I started having an error message, the incompatibility of paper. size of paper or type is incorrect. I used the same paper in the same place for years. I did everything I know how to fix.

  Any suggestions?

  Normally, it is thanks to sensors of paper in the paper from the printer tray. If the paper sensors are dirty, damaged or blocked, then the printer will display a paper or paper Mismatch message.

  There is a document in paper Mismatch questions located here.

  Let me know how it goes.

• OfficeJet Pro 8620: Officejet Pro 8620 - after software download on 4 March 2016 printer fails to detect the paper in the tray

  Hi, I downloaded and installed the latest version of the software on March 4, 2016. But after the installation of the software can not print as printer detects no paper and poster-error "on paper" message even if the paper tray is enough. The printer was working fine before the upgrade of the software. The printer is only 2 months old.

  Hi @Al2016,

  First of all, welcome on the HP Forums, as you know it is a big thank you to get help from community members! To ensure that the paper error output is not hardware related, please make a copy and let me know if it works. A successful copy determines that the problem is actually related to the software. If you can not copy, it's a hardware problem and we will focus on the material.

  If you determine that the problem is hardware related, please use the following to fix the problem: a Message displays "paper" and does not Pick Up paper from the printer. "

  In the unlikely event that you can copy do not print, I suggest to use the following steps to remove the printer from the device and printers and the driver from the properties of the server.

  1. in the folder "devices and printers".

  2. choose "print server properties.

  • Win XP - with no printer selected, click 'File' then 'server properties '.
  • Windows Vista - with no printer selected, press 'Alt' and then click 'file' then 'server properties '.
  • Windows 7/8, 8.1 and 10 - select any printer in the "Devices and printers" folder and click on "Print server properties" above.

  3. click on the "Drivers" tab at the top of the window "properties of the print server.

  4. choose the printer that you want to uninstall, and then click 'remove '.

  5. choose "Remove driver only.

  6. the next screen will give a warning, letting you know that the removal of the driver package will remove it from the system. Click 'Yes' to say are you sure you want to do.

  If documents are stuck in the spooler to print, you see an error, cancel all documents waiting in the print queue or try restart the spooler to print, and then try to delete the driver from 'Print server properties' again. If she will not always remove the sachet, restart the computer and the printer should correct this error "in use" and allow the driver to be removed.

  • If him you continue to get an "in use" message followed the steps in the document here. The specified printer driver is currently in use

  Once the driver is then deleted, open start > all programs > HP folder > folder printer > HP Setup and software (or the icon of the printer).

  The installation screen and the software opens and you can click on connect a new printer.

  Please let me know the results of your efforts and I will get back to you. If one of the suggestions I did resolve the problem, please click Accept as Solution button below so that others may see that your problem is solved! Thank you.

• Office jet 8500 a after a paper jam, the message of the said printer ink cartridge is missing or damaged

  I had a paper jam, after I got the book out by opening the gate to the front, he said the black ink cartridge is missing or damaged.  I shook my head to feel a little and the message went away.  But now he says that the yellow ink cartridge is missing or damaged.  I didn't do anything the message disappears and it will not be printed.  The yellow cartridge was replaced just a few weeks ago and is still full

  Hello sharonc41,
  Welcome to the HP Forums.
  
  It seems that after getting a paper jam error set, you now encounter a cartridge missing error on your Officejet 8500 a. I will do my best to help you with this question.
  
  "The following document may be useful to resolve the"missing cartridge"error: an error ' ink cartridge appears to be missing or corrupt" Message appears on the printer control panel.
  
  Please read and follow all the steps in the document. I would like to know if he was able to help. If you have any other questions or need further assistance do not hesitate to ask.
  
  Thanks for posting on the HP Forums.

• OfficeJet 7612: Customer size of paper in the Photo Tray feeding

  Hello, I'm at my breaking point, trying to get my printer to print on an envelope of 4.75 "x 6.5". It was working fine until I tried to print another batch the next day, then I continued receives "paper mismatch" errors as well as the printer would try to power on the picture for a reason Board any. I already did the following:

  -J' tried 2 versions customized with overturned dimensions of paper sizes. None worked.

  -Configure the printer to read my custom paper size and also put up on the menu print autoadjust the paper to the dimensions of my new size.

  -Reset my printer, it takes off my network wifi, readded and even reset my documents.

  All other tips would be appreciated, I'm running on a Mac. Thank you!

  Hi bgeyvandova, I suspect this problem may be related to your printer firmware, although there is some other explanation that fits your problem.

  HP offers several measures to help solve the paper mismatch error: LINK

  If you try to update your firmware, you can do it here: LINK

  Please let me know if this, or the guide helps you solve this problem. Thank you!

• I have a HP photosmart printer. I have problems printing of documents. I get a message that I have more paper. However, there are paper and the tray is installed properly. What can I do?

  I have a printer HP photosmart Plus B209. my pc is communicating with my printer but the printer will not print because it repeats me more paper. However, the tray is properly installed and loaded paper. I unplugged my printer and plugged back in nothing works. All boards

  Hello

  1. What is the full/exact error message?

  2. who is the operating system installed on the computer?

  A supply of paper problem can occur for several reasons, such as rolls of papers dusty or contaminated, the condition of the paper in the tray, or even problems with the software.

  You can run the troubleshooter and check.

  http://Windows.Microsoft.com/en-in/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Note: You can change the operating system that is appropriate in the article.

  See also the steps from HP article:

  HP Photosmart Plus (B209a, B209c and B209b) all-in-one printers - all-in-one not picking up or feeding of the paper in the Photo tray

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?lang=en&cc=us&TaskID=110&prodSeriesId=3777155&prodTypeId=18972&ObjectID=c02156652

  Hope this information helps. Response with status so that we can help you.

• PIXMA 922 unable to pick up the paper from the lower bin

  I recently bought the PIXMA 922 and have had problems printing.  I put standard Staples copy paper in the lower tray.  When I go to print it sometimes will print a page or two, then it gives me error "Support Code 1008" say that there is no paper.  I have to open the lower tray, readjust the book a bit, click ok.  At that time his 40% chance to print another page or two, otherwise think it once again and then gives the same error.  It makes it almost impossible to print anything more then a few pages because every few pages spend a few minutes of back and forth with the printer.  Have I not a lemon?  Is there something I missed making it so the printer can't pick up the paper?  Before to return the printer that I wanted to try to get assistance.

  Thank you!

  Hello sewell.

  If the paper has been loaded correctly and the error persists, additional troubleshooting will be done to limit the cause of your problem.  Please contact our support group using the link below for further assistance.

  http://www.USA.Canon.com/Cusa/consumer/standard_display/contact_us_consumer

• Affect the size of paper in the drawer - Canon - C5250i

  Dear all,

  IAM a beginner in the canon service. Can someone help me how to set the size of the paper in the drawer of the A3. Error message come together paper guide shown in th illustrion to the right size for the size of the paper.  It has been set by A3 and automatically deleted. Pls find the screenshot A3 is empty.

  

  Hello

  Normally if all what you have to do is open the A3 CD and just slide the paper guide according to your paper size and automatically your machine detects the paper size.

  Please note that if he ' paper stuck between the State and the size of CD detection switch which is

  before the State when you slide the paper CD with impatience, size detection can be NGOs badly displayed Control Panel.

  Hope this will help you.

• printer 1815n lazer said paper when there is paper in the tray, how to fix

  I don't know what has changed, the printer was working fine and then started saying out of paper. I tried to put more paper, less paper, to take it in and out of the status bar.  Turn on the printer and restarting. I'm not savy with this printer, I recently bought, 2nd hand. Can anyone give me a suggestion, what else to try?

  Hello

  This happens to you while I try to print a file in particular?

  Step 1: Check the media and print settings

  1. when the printer is turned on, remove the power cord at the back of the printer, wait 30 seconds and then connect the power cord to the back of the printer.

  2. If the printer is not already on, turn it on by pressing the power button.

  3. replace any paper that is torn, dusty, wrinkled or folded. If the paper is curved, sketching paper, folding gently in the opposite direction of the one who rolls up or replace the paper.

  NOTE:

  Use plain paper in the unit until the problem is resolved.

  4. check that all the papers are the same size and type.

  5. press on the stack of paper on a flat surface to align the edges.

  6. check that the stack of paper to load into the device contains between 10 and 25 sheets of paper.

  NOTE:

  Do not load too much paper into the printer.

  7. Insert the stack of paper into the printer and then gently push the paper guides comfortably against the paper.

  8. set the paper settings in the print driver. The paper in the printer driver settings must match the paper settings for at least one of the installed paper trays.

  a. open a document in the application in which it was created.

  b. click on file.

  c. click print.

  d. click on Properties. The printer properties dialog box displays.

  e. click on the paper/quality tab.

  f. in the drop is size , select the size of paper loaded in the device.

  g. in the drop type , select the type of paper loaded in the device.

  h. click OK.

  NOTE:

  These changes do not change the default print settings. The print settings will revert to the default print settings the next time the application is opened.

  9. in the print dialogue box, click OK to print the document.

  10. try to print again. If the problem persists, continue with the next section.

  NOTE:

  If the problem is resolved and you want to print on a different type of media, change the paper in the unit and repeat steps 2 to 7 for new media.

  Step 2: Clean the rollers

  1. turn off the product and unplug the power cord.

  2. open the access door for access to the rollers. According to the model, this is usually the rear access door. See the user guide for more information on the location of the rollers.

  3. clean the rubber with a non fluffy cloth rolls, slightly impregnated with water.

  NOTE:

  Distilled, filtered or bottled water is recommended for cleaning the rollers. The tap water may contain contaminants that can damage the rollers.

  4. make sure that the rolls of paper based on the feeder, which lie behind the reels back, is cleaned. A cotton swab slightly moistened with water, may be necessary to achieve these rolls.

  5. close the access door and plug the power supply cord.

  6. try to print again. If the problem is not resolved, continue to the next step.

  Step 3: Repair the unit

  If you have followed all the steps and you are still experiencing a problem, service your product.

  Cause

  One of the following problems may cause the error message:

  ·    The paper is curved.

  ·    The printing side, or shiny side, the paper is not loaded in the feeder upside down.

  ·    The paper can not be engaged with the feed rollers.

  ·    The width of the paper guide is adjusted too tightly against the stack of paper.

  ·    The paper tray is not completely inserted in the product.

  ·    The paper in the printer driver settings do not match the paper loaded in the paper tray.

  ·    The driving rubber rollers are covered with dust.

  NOTE: You can also contact the manufacturer of the printer as it can also be a problem with the printer settings.

  Step 4: Turn off bidirectional printing and search for the issue.

  Here's how:

  a. click the Start button > click on Printers and faxes.
  b. right-click on the printer icon, then select printer properties.
  (c) in the Properties window, click the Ports tab.
  d. clear the check box for enable bidirectional support.
  e. click on the OK button.

• HP ENVY 7640 all-in-one: print envelopes and its telling me to load paper into the photo tray

  I am trying to print envelopes on the HP ENVY 7640 printer and it tells me to load paper into the photo tray. Have you encountered this problem and how to solve? Thank you.

  Hey @cmm3,

  Welcome to the Forums of HP Support!

  I understand that you have a problem when printing envelopes from your Windows 7 computer to your HP ENVY 7640 e-all-in-one printer. I would like to help you today with correct this print error "Photo tray". To start I have to make sure that the envelope is correctly loaded in your troubleshooting paper tray. Once you have confirmed that your envelope is loaded OK we'll take a look at the envelope to print on your computer settings. Can I please you follow the steps below.

  Step 1: Load the paper:

  To begin troubleshooting, please click here. Once the support document opens, please select the drop down list for "load envelopes. Please see the instructions on the screen to ensure that your envelope is correctly loaded in the paper tray. Once you have confirmed that your envelope is loaded correctly, proceed to the next step.

  Step 2: Check the print settings:

  Below I will provide you with instructions for printing envelopes per word. You should use a different program on your computer to print envelopes, please respond to this post with the program that you are using so I can provide specific measures.

  1. Open Word and click mail merge to top
  2. Select "envelopes" in the upper left side
  3. A page of envelopes and labels should now open. Enter your delivery and return address.
  4. Select 'Options' on the lower right
  5. Under the tab 'Options for envelopes' to ensure that your envelope is correctly selected.
  6. Select the 'Print Options' tab at the top. You must now select as appropriate feeding method for your product.
  7. Make sure that you choose the option "Face down".
  8. Also ensure that 'right-hand Rotation' is selected
  9. At the bottom of the window, select the drop-down list of pet food
  10. Make sure that the feeding method is set to main tray rather then select automatically
  11. Press 'OK' and 'Print'.

  Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!