Printer HP C310a Printsmart: c310a printer cannot print after upgrading to Windows 10

Similar Questions

• Cannot print after upgrading to Windows 10

  Pleae help, I can't do my printer print after upgrade from Windows 7 to WIndows 10.  I have a HP officejet Pro 8600.  I downloaded a new drivers, etc, and nothing works.  Help, please

  Hello Kathy,

  http://support.HP.com/in-en/drivers/selfservice/HP-OfficeJet-Pro-8600-e-all-in-one-printer-series-N911/4322914/model/4323658

  The link will help you to download the latest drivers. Make sure that your operating system indicates Microsoft Windows, Microsoft Windows 10. If it shows any other OS, please click the Edit link to the right and select Windows 10 in the menu drop-down, and then click Update. After that Windows 10 if poster as your operating system, you can click on the download to start button to download the latest drivers. I hope this helps!

  Although I am an employee of HP, I speak for myself and not for HP. * say thank you by clicking on the "Bravo!" Star"located on the left * make it easier for others to find solutions, marking my answer to"Accept as Solution"if it solves your problem.

• DeskJet 1050 - J410a: HP Deskjet 1050 does not print after upgrade of Windows 10

  Dear forum,

  I recently upgraded my HP Windows OS 8.1 for Windows 10 desktop computer. My deskjet 1050 printer, which worked fine before the upgrade, does not properly more print after the upgrade.

  I used HP Print and Scan Doctor several times, indicating no any problems. I am able to scan documents, the question is limited to printing. I also deleted and reinstalled the drivers at least 2 times (and restarted all systems on a regular basis).

  • A "test print" works very well.
  • When I print a PDF from the edge, the printer creates output but not good quality.
  • When I print an office word document, pages came out empty.

  3 cases have a common behavior, whenever I get an error message. "Morning maken puts printer niet mogelijk. Duch is for "cannot connect to the printer.".

  Do you have any tips for me?

  With sincere friendships.

  Pieter

  HeyPieter_Belgium

  Welcome to the HP Forums, I'd love to help you with printing problems you encounter. Although I am not sure what is cause of the error of communication, or of poor quality, I suspect it has something to with the pilot and the recent upgrade. I suggest to uninstall the software, remove the Chuck from the properties of the server, and then put it back using the printer Installation Wizard. I will list the links and instructions below to help you in each of these steps.

  HP printers - uninstalling the software of the printer (Windows)

  Remove the driver from the print server properties:

  1. in the folder "devices and printers".

  2. choose "print server properties.

  • Win XP - with no printer selected, click 'File' then 'server properties '.
  • Windows Vista - with no printer selected, press 'Alt' and then click 'file' then 'server properties '.
  • Windows 7/8, 8.1 and 10 -select any printer in the "Devices and printers" folder and click on "Print server properties" above.

  3. click on the "Drivers" tab at the top of the window "properties of the print server.

  4. choose the printer that you want to uninstall, and then click 'remove '.

  5. choose "Remove driver only.

  6. the next screen will give a warning, letting you know that the removal of the driver package will remove it from the system. Click 'Yes' to say are you sure you want to do.

  If documents are stuck in the spooler to print, you see an error, cancel all documents waiting in the print queue or try restart the spooler to print, and then try to delete the driver from 'Print server properties' again. If she will not always remove the sachet, restart the computer and the printer should correct this error "in use" and allow the driver to be removed.

  • If him you continue to get an "in use" message followed the steps in the document here. The specified printer driver is currently in use

  Download and run the Installation Wizard for printer: www.HP.com/go/Tools 

  If this solves the problem, please indicate your post as solved by clicking on the accept button Solution below. If you need help, let me know!

  Thank you.

• DesignJet 111: DesignJet 111 - printing problems - no printing after upgrading to Windows 10

  Several problems to the upgrade of WINDOWS 7 for WIN 10.

  The HP DesignJet is 'offline' and can't figure out how to change the setting of "online."

  The definition "print directly to the printer" is not.

  Yellow flashing on the printer dashboard - magenta ink cartridge shows empty, but it is full.

  Computer HP printer installed - poster is in the Device Manager - watch "this device is functioning."

  Printer is listed in devices and printers.

  HP Support Assistant doesn't recognize - printer in the list, can not find device during an attempt of "add design.

  Printer turns off or recycle off on after turning on.

  Hello

  If you have a driver problem:

  Remove the driver completely from the computer, then download and install the lates driver.

  Here is the link incase you need

  http://h20564.www2.HP.com/hpsc/SWD/public/readIndex?sp4ts.Oid=4123145 & swLangOid = 8 & swEnvOid = 4192

  Now, the yellow light flashes on the Panel means that the printer needs attention, like:

  -Close coverage which is open

  -Of paper

  -Paper tilt

  -Jam

  -An error code

  If you have 6 columns on the levels of ink instead of 4 is because you have an error code.

  On the following link, you can find more information on how to prepare the error codes

  http://h20565.www2.HP.com/hpsc/doc/public/display?sp4ts.Oid=352387 & docid = emr_na-bpp03841

  If you have an error code, the printer appears offline on your computer.

  On this other link, you will find how to check other messages on the printer

  http://h20564.www2.HP.com/hpsc/doc/public/display?docid=emr_na-c01669949

• HP940c does not web print after upgrading to Windows 7

  recently unclassified HP Pavilion 9500 from Vista Home Premium to Windows 7 Home Premium. After upgrade, can no longer print to Web sites - using IE 11.0. Before the upgrade was using IE 9.0. Tried to print from multiple sites by using the function "Print" in the "Tools" button Was able to copy information Word doc Web site and print it from there. All ideasas to problem?

  Hi twf42,

  Thank you for being an active member of the HP support forums.  I understand that you have an impression of Internet Explorer 11 problem on your Windows 7 computer.

  I have included a link in Microsoft Internet Explorer required 11.  Microsoft says IE 11 runs only on computers running Windows 8.1 or Windows RT 8.1.

  Microsoft Internet Explore 11 system requirements

• HP Officejet Pro 8500 a A910a: problem formatting of printer after upgrade to Windows 10

  After the upgrade to Windows 7 to 10, some printed documents very well while others print in close columsns of 15 letters causing a document 1 page run 6 to 8 pages long and useless.

  I downloaded the latest driver from HP and used their diagnostic tests.  I used Windows Diagnostics.  They suggest no action.  I contacted Microsoft 3 times and technicians turned out to be unnecessary; It was suggested that finally back to Windows 7.  The printer works just great.  This printer is no longer under warranty.  I have a same printer which works well on another computer running Windows 10.

  I would like to know how to solve this problem caused by the upgrade to Windows 10.

  Wing wrote:

  I use Outlook.  Previews all looked normal.  I had problens with printing of emails but have been able to print a PDF document.

  Hi Wingtip,

  Please follow these steps to try to resolve the problem:

  1. open outlook

  2. double-click on the email address that you want to print (the email must open in a separate window)

  3. click on file and then print

  4. in the print window, select your printer and click Print below options.

  5. in the window options printing, make sure that the print style is set to memo, and then click Page layout

  6. click the paper tab, and set the margins to 0.50 '' on all sides. Also make sure the paper type and size is set to letter.

  7. click OK and then try to print.

  Please let me know if this helped.

• HP Officejet Pro 8620: Cannot parse after upgrade to Windows 10

  After switching to Windows 10, I found that I could not scan to my computer using a USB connection.  I ran HP print and Scan doctor and he said that everything was OK and I could actually scan a document into my computer using the "scan test" function of the program.  However, the normal scan would not work with the error msg 'connection to computer is lost.  So I uninstalled the current HP printer driver software and downloaded the recommended replacement.  The scan does not always for the same reason.  Still printing HP and Scan doctor said that everything is perfect with the scanner but now when I try to do a 'test' scan I get the message "HP Officejet Pro 8620 is not found".

  This same package worked for many other clients, so I don't feel the driver/software it is, on the contrary, I suspect that the question has something to do with the computer.  I'm always happy to do everything that I can to help if you want.

  I suggest running the tool (SFC.exe) System File Checker. If you do not know how, you can use the following link for instructions: System File Checker: run sfc/scannow & analyze its logs in Windows 10 / 8 / 7.

  Another thing we can do to help isolate the problem is to perform a WebScan.

  I made some screenshots for you that might help, I know that sometimes it is easier when you have a Visual. You will need to get the printers IP address from the front panel of the printer. You can touch the wireless network icon and view in the menu wireless settings. Take the IP address and enter the address of a browser bar.

  In the embedded Web server, click settings

  

  On the left side, click the administrator settings

  

  You will see the following message will appear, click OK

  

  You can now select continue on this site

  

  It may take a few minutes for the next page load. You might even see get a message that says: "Internal system error", if this happens please just refresh the page. (you can tap F5 on the keyboard to refresh)

  

  Once the WebScan is enabled you can click the WebScan tab above and do a scan. Please let me know if it works or not.

• OfficeJet 7410xi: computer does not have USB printer after upgrade to window 10

  The computer does not find the USB connected printer (Officejet 7410xi) after having modernized the window system 10.

  Hello

  Download and install the following software:

  http://ftp.HP.com/pub/softlib/software13/COL30951/MP-110165-3/AIO_CDB_Net_Full_Win_WW_140_408-5.exe

  During SOUTH clck the link (4th one) software selection step and uncheck the Bing toolbar due to incompatibility issues with MS Edge, then continue with the installation of you

  Please let me know the results,

  Shlomi

• HP laserjet 1018 is not printing after upgrading to Windows 7

  I've upgraded Windows vista to windows 7 and my HP laserjet 1018 is not printing.  The status shows "lazy", is not ready.  Any ideas?

  you use a windows 7 64 bit or 32 bit?

  for a 32-bit operating system, download the software at:

  h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4062&LC=en&cc=us&DLC=en&sw_lang=&product=1814094#N670

  for a 64 bit OS, download software to:

  h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063&LC=en&cc=us&DLC=en&sw_lang=&product=1814094

  for any question about the drivers and software for HP products check this site:

  h10025.www1.HP.com/ewfrf/wc/document?DocName=c01506815&LC=en&DLC=en&cc=us&OS=4063&product=1814094&sw_lang=

• I can't print after upgrade to Mac OS Sierra (error "Unable to filter")

  I can't print after upgrade to MacOS Sierra, always shown "cannot filter. I use AirPrint for Epson L355. Tried to reset the printer settings, uninstall and then install the printer, always in vain 'filter '.

  I think it has something to do with MacOS Sierra 10.12.1 Beta (16B2333a). Help, please!

  Update to the Sierra officially released

• Dell 942 printer after moving to windows 8?

  I had to switch from Win XP to Windows 8.1. I have a dell 942 all-in-one printer. I can get the scanner part of work with Windows 8, but not from the side of impression. Any person having brilliant ideas that I can not afford a new printer for the moment. ?

  jes2014,

  First run, delete print jobs to eliminate any print job stuck in the queue.

  Unplug the printer.

  Download and run the patch (cleaning printer utility) until it prompts you to restart your computer.

  Restart your computer. Make sure that the printer is deleted. Driver Manual printer removal

  Download the 32-bit drivers for Windows 8 32 bit Vista or 64-bit drivers for 64 bit Vista Windows 8. Install the Vista drivers in Vista compatibility mode, you will get a message, the printer is not connected. Connect the printer at the moment (power on).

  You will find links to the patch/drivers to...

  Dell 942 Photo-All - In - One Printer owners thread (W7)

  Don't forget the programs anti-virus and firewall will block communications. If you have not installed one, Windows Defender is the default value. Try to read...

  Enable the printer after Microsoft Essentials/Windows Defender

  Rick

• Cannot print and scan after upgrade to Windows 10

  Since the upgrade to Windows 10 I cannot print from Adobe Acrobat XI Pro on my Canon ImageClass MF 4150 printer and also cannot scan from the same printer.

  Hi alans77953791,

  You are not able to print from other applications as well?

  You see an error message when trying to print/scanning?

  Try to follow the procedure mentioned below:

  1 - print from other applications like Ms Word/Notepad and see if you can print.

  2 - Check if there is an update available for Acrobat, launch Acrobat > go to the Help menu > click Find updates.

  3 - follow the steps that are given here: print troubleshoot PDF in Acrobat and Reader.

  4. If this does not work, try to repair Acrobat installation, launch Acrobat > click on the Help menu, then click on repair installation.

  Let us know if it worked.

  Thank you

  Shivam

• OfficeJet 5745: Cannot print after update of Windows 10

  I've updated to Windows 10 and now have problems printing.  Help!  I've done all the troubleshooting, coil status stuff!  I'm used to be able to print from the internet, scanning to my computer or email and print wireless from my phone.  I now can not print anything!  I tried to install Windows updates.  Should what printer I configure default network or regular?  Use the printer pdf microsoft thing?  I am desperate... saved my bank statement online (pdf) to my documents and it would not print the Bank or my documents!  Before this I had problems after that my hard drive crashed and I got a new hard drive.   When my hard drive crashed I was using WINDOWS 10 and everything on the big printer worked; they sent back with new hard drive on windows 8.1 and I had I thought that the upgradew would solve the questions.   I could print and scan but no wireless for my phone on the new HDD in windows 8.1 and upgrade to 10 thought would solve my problems, but now it's worse... Help!

  Hi @savra,

  If your computer is connected to the printer on a wireless network, you do not want to send print jobs to the network printer.

  Here is a support document to help with printer after Windows 10 upgrade problems - after Windows 10 Upgrade, printer problems occur.

  Aside to make sure Windows updates are up to date, there are a few other updates that can help with printing.

  Microsoft has released an update that is supposed to help with wireless printing - Cumulative Update for Windows 10.

  There was also an update for Adobe Flash Player in Internet Explorer and Microsoft Edge who can help get this impression of your bank's site - Update for Adobe Flash Player.

  Please let me know how it goes.

  If this helps you find a solution please click the 'accept as Solution' and the 'thumbs up' buttons down below in this message.

  Thank you!

• HP Photosmart B110a: HP Photosmart B110a cannot print via wifi after upgraded to windows 10 notebook

  Before I updated to windows 10,

  I can print via wifi.

  But now I can't.

  the error says that there is some connection problems.

  But I could not understand what is wrong.

  We need to make a configuration under windows 10?

  Thank you

  Hi ma1210,

  Given that this problem occurred after the upgrade to Windows 10 I think your best option would be to uninstall the printer driver and reinstall Windows 10 drivers for the printer. You can download Windows 10 drivers for this printer by going to HP support at www.support.hp.com site - then enter your product information IE HP Photosmart B110a... change the Windows 10 operating system, download the driver and install it. According to me, which should solve the problem. All the best...

• HP Deskjet 6122: Problems printing to my HP Deskjet 6122 after upgrade to Windows 10

  Hello

  I used the above printer on Windows 7 OS by downloading the driver for the HP Deskjet 990c printer and it worked well.

  After that I had upgraded to Windows 10, I wasn't able to find the printer printer & devices on the list.

  The icon appears very much (like HP990c), but when I try to print, it is just straight up with an error message.

  The ironic part is that I have a 1220C HPDekjet, who is an older printer, and which has been added successfully as a new printer and prints well.

  Optionally you can give guidance will be highly appreciated.

  Hello

  I'm afraid that the HP Deskjet 6122 is inompatible with Windows 10, it is no longer supported on Windows 8 or any later operating system.

  You can find this information below:

  http://support.HP.com/us-en/document/c04658195

  Kind regards

  Shlomi