Qosmio G40 input video switch

Hello

Under Vista Media center, I am able to watch DTT using the built-in DTT Tuner.
I am also able to watch TV with the external TV box (connected to the video input integrated). But I have to reconfigure the TV Signal in Media Center and lost my TNT Setup.

So my question is:
-Are there an easy way to swith between the DTT Tuner and video input under Media Center without having to reconfigure the TV Signal (and lost configuration TNT)?

Good day!

Hello

I m not sure if this is possible because as far as I know, you can configure the channels only from a single source
But maybe I could be wrong in any case I think that it s is not possible

Concerning

Tags: Toshiba

Similar Questions

  • Qosmio G40 - how to monitor audio input?

    I installed Adobe Audition on my Qosmio G40 but were unable to control sound input or get audition to record. (It used to work fine on my xp pc) I was able to record sounds, but he can't listen to as his '' go. '' I also tried to install an external sound card: CREATIVE EXTIGY but can't get the laptop to recognize that it is installed.

    EXTIGY can work with my laptop?

    How to monitor input sound?

    His card is Realtek

    Advice welcome.
    Sean.

    Hello

    Have you checked the Realtek HD Audio Manager in the control panel?
    To do this.

    On the right, you will find the analog ports, internal speakers and mic and digital.

    Unfortunately, I m not a Qosmio G40 owner but I have a Satellite phone with Realtek audio chip and in my case the audio HD Manager provides some settings that can be changed.

    Must check and play with it.

  • Qosmio G40-108: bad quality video/DVD playback

    I have new Qosmio G40 108 loaded with Vista Ultimate and am very disappointed with the quality of video/DVD playback compared to the older machines loaded with XP. Seems insipid depth bland, not really the color and not too strong. I tried another laptop of another manufacturer and pretty much the same thing!

    What is Vista's fault? You want to try XP but blocks me when I boot with XP disc in. I would like to run the two to see if there is a difference. (Sorry to all if this appears as message repeated hurry but bad touches earlier - starting!)

    I don't have a notebook, G40 but I use the Vista OS and I must say that the video and the quality of the DVDs is great!
    Don't know what DVD software you use, but I use the WinDVD and Windows Media Player. Two applications provide the same quality.

    > I tried another laptop of another manufacturer and pretty much the same thing!
    According to your own statement I don't think that there is something wrong with the Qosmio G40 laptop because you have the same opinion on the other non-toshiba computer.

    PS; I wonder why you start always different threads on the same topic:
    http://forums.computers.Toshiba-Europe.com/forums//message.jspa?MessageID=107067#107067

    However, if you wish, you can test the XP if the same phenomenon occurs with other OS.

  • Qosmio G40-108-dvd/video playback quality

    You just bought the Qosmio G40 - 108 loaded with Vista Ultimate. EAD all reports and went for the superb view report. I am very disappointed by the quality of playback on DVD and avi (divX, Xvid, h264). The colors are bland bland and not all that sharp.

    Compared to my Toshiba 3 year, mid-range machine running Windows XP Home edition, it is pretty poor. I did not test anything.

    Am I missing something or is it the fault of Vista. I tried to load Windows XP Home edition, but could not because it came with the message "blocked" since WXP is a downgrade. Can anyone help? Please, I beg you.

    Hello James

    I'm really surprised that your question is marked as replied. You have the solution to the problem described? Please let us know everything is OK now and I hope that you will be able to watch DVDs.

  • Qosmio G40 - update graphics card

    Hello world

    I know it works has already answered in October 2009, but I have a few not 100% course info on the upgrade of the graphics cards. Now I have a qosmio g40-10 with nvidia geforce 8600 with 512 video memory. Because this card is purely not enough for the high-end gaming today, I want to update at least 1 GB of video memory. Like many people here, I tried to find some information online but its just waste of time. I asked in each PC store in my town this topic and 60% of them responded that it is possible, but it will cost you so.

    They could not tell exactly witch card should take but logically it will be nvidia series that were used by Toshiba manufacter, what I'll do I will find some young model of Toshiba nvidia cards and will just try to adapt it. Logically that laptops Toshiba chassy is almost the same, of course mounting screws can be different, but ultimately, it's a project. The only problem is the motherboard, I heard that this motherboard is unable to accept certain graphics cards.

    If you have some info on this please let me know.
    Also different (highest card) coz, there will be cooling problem so if you have ideas to solve heating, please share it with me.
    Thanks much adrian

    Hello Adrian

    I guess that you know very well that the possibilities of upgrade on mobile units are very limited; especially GPU or CPU upgrade and laptop manufacturers offer don t any kind of support. Because of the design specific common problem for mobile units is cooling system. More performance means more heat and more heat, compromised of portable computer hardware switch or damage.

    Manufacturers of portable don t support cela and don offers t any helpful info about it. GPU upgrade in my opinion is not a good idea. OK, you can do with your laptop that you want and play a little bit, but I'm afraid that your project is too risky and will not end with success of m.

    If you need a more powerful computer I think it's time for the new portable computer with more powerful hardware. What you think so.

  • Qosmio G40 - no sound on HDMI

    I can't get sound on my LCD TV connected with cable HDMI with my Qosmio G40. Help please.

    Hello

    I found a very interesting document from Toshiba which provides a step by step instruction how connect a Qosmio G30 to a TV using the HDMI port and why there is no audio over HDMI on Qosmio G30 under Vista.

    [No audio over HDMI on Qosmio G30 under Vista. | http://APS2.Toshiba-tro.de/KB0/FAQ7A01ZU0005R01.htm]

    _The paper said: _

    (1) open the "Control Panel" to click 'Start'-> 'Settings'-> 'Control Panel '.
    2) click on 'Hardware & Sound.
    (3) left-click on "his".
    (4) a window appears where you can select the playback device. Left click on 'device of digital output (S/PDIF).
    (5) after selecting the digital output, click on 'Set as default', then 'apply '.
    (6) now the signal must be properly transferred correctly to HDMI.

    Check this box:
    1. fix a television for the Qosmio G40 HDMI while both units are State in a "powered off the coast.
    2. turn first on television and then the Qosmio G40.

    _Notes on the HDMI connection: _

    S ' Please refer always to the manual of your TV on how to select and activate the TVs HDMI input port.
    -Please ensure that TVs equipped with a HDMI input port can be connected to the computer.
    S ' Please use a HDMI cable (NOT supplied with the computer) commercially available to connect to the TV and the computer.
    -Not all TVs equipped with a HDMI input port have been tested for compatibility with the computer. Therefore, does not guarantee that the HD DVD-video content can be displayed on any TV with an HDMI input port. Contents of the DVD - video HD may not display correctly on some TVs.
    -Qosmio G40 should automatically detect the HDMI connection and video output can be seen via HDMI to the TV.

    Good bye

  • Qosmio G30-155: video Capture does not work using s-video in port

    Toshiba Qosmio G30-155 video capture does not work via the ports of the video (Windows Vista Ultimate x 86) victory of version 3.90 BIOS
    Video capture does not work in Windows Media Center, even if selected as ports of entry port composite or s-video in Windows Media Center settings.

    In the BIOS version 3.90 parameters via esc - F1 can only select this option: NTSC (USA), NTSC (Japan), PAL (S-video).

    It is worth noting that the laptop is supposed to be capture NTSC for composite input mode

    Someone turned to make this model of video capture for laptop, via composite video input with the new version of the BIOS (version 3.90 win)?

    Can you please explain what you want to do exactly?

    Many years ago I had this old Qosmio with TV tuner and antenna in port so I used it to transfer my old VHS format videos and burn movie DVDs.

    To this end, I didn't use Windows Media Center. Why you n t use other recording applications. I think that everyone is better than Windows Media Center.

  • Qosmio G40-108 does not start

    Hi Gang

    I hope that there is some good buddies out there that can save a window double glazing to be mullared by that lappy.
    I had (Qosmio G40-108 with 4 GB of RAM) since August 2007. Everything was fine until two weeks about where it kept crashing during the execution of a couple normal progs that I use.
    After reading several messages from buddies with similar problems, I think it might be the PCI express graphics. Is this good? I can swap out? Or advice, blaggs, ideas or suggestions are very welcome. :)

    * Do not forget: there is always someone worse off than you... *.

    What exactly happens?
    Your Qosmio freezes simply and you must turn off or switches off without any warning messages?

  • I want to install Win XP on Vista on Qosmio G40 - 10F - need drivers

    Hello

    I have a Qosmio G40-10th which has Windows Vista.
    I want to switch to Windows XP but worry about what drivers I need and where can I get them?

    Also, I wonder if XP installation means that I would be able to use the Vista recovery disk I got with the Qosmio.

    Any help is very appreciated,

    Kind regards

    EOC

    Hello

    Go to the Toshiba driver page:

    http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp

    And check if you have the drivers for win xp for your model, otherwise, it will be useless to install it.

    For my laptop, I installed Vmware with windows xp inside environment.

  • Qosmio G40 Windows XP - some drivers/utilities missing

    Dear all,

    I would be grateful if anyone can tell where I can get drivers/utilities for Windows XP for the following:
    -Flash cards (to make the combinations of work: switch between monitors, brightness, ets);
    -Shortcut keys on the keyboard {eleven buttons}.

    All the other drivers/utilities have been found/installed/proved to work correctly. XP seems to work a lot smoother and faster on this beautiful piece of hardware.

    Thank you for your help,
    Kind regards

    The utility of flash cards is only available for Vista.

    I looked on the page of the Toshiba driver and, unfortunately, but I didn t see the XP drivers for the Qosmio G40 at this time.
    I assume that you've found the XP drivers some currents such as graphics card or driver sound on 3 third-party pages. But to use the features of Toshiba as button of keyboard shortcuts, you will need a XP driver and tool designed especially for this laptop.

    Looks like the drivers are not available at this time and we will have to wait until XP drivers will be sorry, but I really put t see another possibility.

    Best regards dude

  • Signal (PAL 60) record with the Qosmio G40 Line In (Capture) Option

    I'm in Australia - and I have a lot of NTSC video tapes I want to MPEG...

    These bands play very well on all the TVs/LCD TV in the House.

    Qosmio G40 seems to have problems with PAL 60 signal that sends my VHS player...

    My VHS/DVD from Toshiba drive is to convert NTSC to PAL 60 signal - as this VHS player bought in Australia - this seems to be the Australian standard bought a VHS/DVD player.

    There is no option on the VHS player to the NTSC signal... I tried another VHS player - and it gives me the same output PAL 60, this player also could leave the NTSC signal...

    So I wonder if the Qosmio G40 is able to record the signal PAL 60 - maybe I'm missing a setting somewhere...

    I use Ulead movie maker software, which is supplied with the machine... but I don't see any options on the support PAL 60...
    Maybe the TV card installed in the machine does not support PAL 60 - I can't find any info about this...

    Maybe I need to use a software of different capture which will support PAL 60 options...
    Or maybe I just buy a VHS of America drive, and qosmio q40 will capture the NTSC image very well... (I already have a few products from 110V at home)

    Any thoughts?

    Hello

    I'm not sure if this is possible, but you can check the BIOS settings, if there is an option that would allows you to change settings of NTCS/PAL.

    Check it out

  • No output from HD on HDMI out port on Qosmio G40

    I read the DVD HD guide of my Qosmio G40 "only the computer display panel supports display with treatment high definition. When playback on a TV connected to the computer, the screen on television will be only ordinay screen and not display with high definition treatment. ».

    I don't know if I understand the manual right. He says that I can't view HD DVD HD videos on a TV even if it is connected with HDMI output port? If this is really the case, where HD to HDMI?

    I am very disappointed in this respect. Or I don't interpred bad manual?

    Hello

    I think you have misunderstood something.
    If you will connect Full-HD TV via a HDMI cable to the laptop, you should be able to watch HD-DVD in HD movies.

    But due to technical limitations, HD-DVD can only be looked at on a device at the same time. To read HD - DVD on both devices at the same time is not supported.

    Because of the important data stream when a HD-DVD is read, the machine can manage only a HD signal. If two devices have been accessed at the same time, the machine must manage two signals HD, which is not supported due to the technical limitations of the machine itself.

    Therefore, it is possible view a HD-DVD on a single device at the same time. This restriction is valid only for the HD-DVD playback. The normal clone mode is not affected.

    So you can choose between the laptop or TV, but not the two screens together

    concerning

  • Qosmio G40 - Interntet browsers don't show any music, flash, photos

    Hi all

    I have a problem with the internet

    My browser cannot display any video, music, flash, etc...

    I tried a lot of browsers such as: Firefox, google chrome, opera, IE... etc and the result has been one
    I tried another user but the result was one too many.

    No image or flash or text only of the thing.

    Please help me out

    And this photo for my problem

    http://www.Zerovb.com/ZUP//uploads/images/Zerovb-23db23400a.jpg

    My Notebook: Tosiba Qosmio G40
    OS: Microsoft Windows Vista Ultimae / SP2

    Thank you all

    Hmm, it sounds to me like something on your laptop would prevent the Add-ons like flash image to display in the window of the Web browser.
    I doubt that the only browser settings cause this because this problem occurs with different browsers.
    So I guess that a firewall or security tool that is installed on your laptop causes this

    You are using a firewall or use such tools 3rd party who would be responsible for this issue?

  • Registration with Qosmio G40 - 10F entry

    Hey

    I've got the Qosmio G40 - 10F.
    Try saving a few TV summer messing around just to see if I could make it work, but no luck.

    First of all, I tried to play with media center, could not find a way.

    I Googled, then it and found this... (I know it's a different model, but this is the closest example of you that I could find)
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=21006
    But the development of photo utility is not in Toshiba assist thing to watch the entrance (first tried just to test). I downloaded cyberlink and could only find two devices (webcam and capture of Toshiba).

    Any idea? I am connected to a TV using it's composite past to the plug-in software component video cable (from composite on, I think it is, a 3.5 jack (even used for headphones anyway) I got with the laptop.)

    Thanks in advance for any help :))
    Kieran

    Stand by. You have a problem with registration only or you aren't able to watch television at all?

    I did some experiments with Qosmio G30 and WMC and I was able to record all programs available. Because of this, I would like to know if you are able to watch the TV or not.

  • Windows 8 Pro would be runs Qosmio G40?

    Does anyone know if the QOSMIO G40 running Win8 Pro?

    System is 'only' 4-year-old and Win7 Ultimate without any problems.
    However, some drivers for Win8 are found...

    The only found drivers are following [this | family = 381 http://nl.computers.toshiba-europe.com/innovation/windows8_drivers.jsp?service=NL&selCategory=2&selF & selSeries = 229 & selProduct = null & selShortMo d = null & language = 12 & selOS = 42 & selType = all & yearupload = & monthupload = & dayupload = & useDate = null & mode = allMac hines & search = & action = search & macId = & country = 3 & page = 1] page

    Any suggestions?

    You can install the Windows 8 on all computers that would meet this hardware configuration.
    http://Windows.Microsoft.com/en-us/Windows-8/system-requirements

    Pilots win 8 out for all the portable Win 7 appearing in this list:
    http://APS2.toshiba-tro.de/KB0/TSB2A03EU0000R04.htm

Maybe you are looking for

  • Global scale

    Hi is there a kind of option, I can do a global scale for El captain? I just bought a 40 inch 4 k and while I can resize the desktop, files and fonts are small. When I try to view Option scale display... it only adjusts for this specific folder.

  • Drop down menu after selecting the option from drop down

    When I choose a country, I need the cities in the counties to appear in the drop-down list option in the next cell. Need to set up the performance of sales by the engineers by country.

  • Feature touch screen of my XPS2720

    The touch screen of my XPS2720 function does not work even after the bios update. the diagnosis says that he does not support stiletto and tactile.

  • Could not find the feature with Id: blackberry.invoke.message arguments

    Hi, I am using the message application, while the building, I have an error to BB 10 WebWorks SDK failed to find the feature with Id : blackberry.invoke.message arguments This is supported in this beta version of the SDK, simiarly there are also some

  • Upgrade of the ultrabook.

    Laptop: HP SPECTRUM XT TOUCHSMART Model: 15-4000ee Product: C1S41EA   Recently I bought HP spectrum with i5 Proccesor. After awhile this Proccesor was not good enough for my work. I would like to know can I change Proccesor i7, or at least upgrading