Re: L50 - B Satellite will not be closed

Similar Questions

• Z30 satellite will not be closed

  New laptop for my daughter will not entirely closed and seems to be stuck at the stage of closing.
  I tried pressing so that hold power button for 5 seconds.

  It seems to stop even if the power led on the touchpad still slowly flashes orange.
  When you press power button / stop again, the "Stop" screen is still there.

  He did this for more than a half.

  Hi Judy

  As I see that you've marked your thread as answered. Is everything OK?
  If so, send us your short comments please.

  If I m right of your laptop is not switch reset so brief description how it works, you can find on http://aps2.toshiba-tro.de/kb0/FAQ3500560002R01.htm

• L50 - B satellite will not start when the battery is completely discharged

  Hello

  My Toshiba L50 - B won't start when the battery is fully drained but connected to the power outlet.
  I try to work most of the time on the battery to keep the battery in good shape, but when I forgot to turn off the battery drains and the system will not start when I plug in the adapter.

  The battery charge indicator is orange light as it should. Only when the battery is fully charged to 100%, it will run at startup and function normally after that. I tried to turn on the laptop several times during the charge cycle, but only when the charge indicator changes from yellow to white it starts. Tested for 2 bodies.

  My old Toshiba always immediately turned on when I plugged the adapter even when the battery has been completely drained. Am I missing a setting somewhere?

  Thanks for responding... I hope well :-)

  Toshiba L50 - B
  Windows 8.1
  Any standard/original setting since I only acquired this laptop a month ago.

  The laptop should light up if the power adapter is plugged in and power the laptop corectly any if the battery is empty or during charge.

  Please check the version of the BIOS that is available on your mobile phone and compare with the BIOS available on the page of the Toshiba UE driver
  Maybe you need to update the BIOS, but to be honest, the history seems really odd to me and I m afraid that there could be some power supply electronic problem

  So in the worst case, the laptop must be checked by authorized service provider.

• My C850 Satellite will not be closed after update Win8.1

  I hope I can get help from this forum. Since I've updated my OS from windows 8 for windows 8.1 as my laptop (Toshiba c850) refused to stop, the screen goes blank (power off dark, signaling), but still the power light stays on, had to make a forced turn off many times.

  Please help because I'm losing my mind.

  Hello

  In my opinion, something was wrong during the upgrade.
  This is not unusual since I have read in various forums on strange issue after upgrade Windows 8.1.

  I recommend you do following:
  Set the computer laptop back to factory settings. Recover the laptop Windows 8
  Updated 8 Windows to the last State (all updates, patches must be installed)

  Then check the windows 8.1 upgrade information page http://www.toshiba.eu/innovation/generic/windows8_1-message/ and follow the step by step instructions that contain also the facility of 8.1 and tools Windows drivers in the correct order!

• Portege Z930 - will not be closed

  My brand new Ultrabook of Z930 age of 3 days will not be closed.

  I've updated the Bios, downloaded new drivers for various devices (including the screen and the dynadock!) and it still don't bloody close (or Hibernate).
  I've even deleted the software from dynedock think it's maybe... still no good.

  Very annoying to pay $ albums with Toshiba for this fundamental flaw.
  Thank you

  Reinstall the original recovery image and check with the factory settings.

  Please post comments.

• Pavilion dv6-1350us Entertainm: Pavilion dv6-1350 us running Windows 7 will not be closed

  Have not used my laptop for the last 45 days and have not installed anything new. W7, 64-bit running. Just used on these days and it will not be closed. When I stopped it just hangs and displays that says: "if it please do not turn off or unplug your machine. Installation of update 1 of 1 ". This can last for hours.

  I stop it manually with the power button which of course translates message when I start again that «Windows did not close properly»

  I thought that since I had not used the computer laptop or literally turned on for about 45 days, that maybe I was missing a few important Windows updates, but when I go to Windows update via Control Panel and click on Windows Update to search for updates, it "just hangs" it thus, showing never updates available. Last update of the W installed was 26/03/16 and laptop worked OK.

  Any ideas?

  I downloaded ccleaner pro (first edition) and scanned the hard drive. I checked 'fix all issues' and it worked! Whatever files or conflicts on the register or wherever was causing the 'hang up' were eliminated obviously that my laptop was able to stop. :-)

• My Toshiba Satellite will NOT connect to the WiFi in my house of employers, but connects everywhere else I will!

  My Toshiba Satellite WILL NOT connect to WiFi in my house of employers, but connects everywhere else I go; I have Windows XP Home Edition SP3, and there a router Linksys WRT16ON. My network card is an Atheros AR5001X + Wireless Network Adapter (and says "this device is working properly". I tried disabling, entering all information, penetrates is not in the news was unchecking the "Enable IEEE 802. 1 x authentication"(and whenever I go in there, he checked again) changed on 'Open' and 'AES' TKIP, WPA (which is) and the password is correct, restart the router, moved the laptop around (the router was in my room, now it is in the thnxt room and it Me REPEAT JUST : 'Validation of identity' and 'impossible to find a certificate to connect to the network'.) I can connect with ethernet, but not with this new situation of the House, do I have the wireless. WHAT ME MISS? I did this for weeks and even now, it says I'm connected, the signal strength is very good, often great, but Explorer cannot display this webpage. Can someone tell me what to do? Thank you!  Allie

  Your old Toshiba equipped with an adapter wireless which is likely to be used for Wireless-a, b, wireless and wireless-g (the project).   Your employer has a newer version (not the last and larger, but much more recent than your equipment) router Linksys that is capable of wireless-b, wireless-g and wireless - n.

  Your most likely problem is that your employer has set up his router to "N-only.  Wireless n uses the same radio frequency as wireless-g (this is why detect you the "excellent" signal strength), but uses a different protocol (this is why you can't connect).

  Politely ask your employer to change the mode 'network' from the back of the default router of "mixed".

  The router manual is here: http://homesupport.cisco.com/en-us/support/routers/WRT160N see p. 13 ' Basic Wireless Settings.

  Looking for a certificate message was probably bound to have the box 802.11 x checked.  This box should NOT be checked for home wireless networks.

• my laptop will not be closed. I have xp proffessional__

  my laptop will not be closed. I have xp proffessional OS

  Resources to solve the shutdown problems in Windows XP
  http://support.Microsoft.com/kb/308029

  Utilities for Windows XP stops
  http://aumha.org/win5/a/shtdwnxp.htm

  Harold Horne / TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

• My dvd drive opens at the beginning and will not be closed.

  My dvd drive opens at the beginning and will not be closed. How can I solve this problem?

  Hi Showme66,

  A. from when what happens?

  B. what happens when you try to close the drive?

  C. recent changes made on the computer?

  D. the DVD drive opens automatically at startup?

  This problem may occur if one of the following scenarios is true:

  • Drivers filter in the CD and the DVD storage stack are not migrated successfully to Windows Vista.
  • You have uninstalled the CD software that fails to withdraw properly in the registry.
  • You have installed software that adds filter drivers in the CD and the storage stack of DVDs that interfere with existing filters.

  To resolve this issue automatically, click the fix this problem link. Then, click run now button from the Automated Troubleshooting Services page and follow the steps in this wizard.

  http://support.Microsoft.com/kb/929461

  Please post back the result.

  Bindu S - Microsoft Support

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] Marking a post as answer, or relatively useful, you help others find the answer faster

• My Hp 4500 Wireless printer does not print, or will not be closed

  The connected printer will not be closed, does not, print does not diagnosis or anything like that.  He tried to stop three hours now and nothing has changed.  Power on the computer power off and nothing happens.

  Hello

  1. don't you encounter any error message when you try to print?
  2. have you made changes to the computer recently?
  3. what happens when you run the HP diagnostic utility?

  Method 1.
  Try to run the printer Troubleshooter and check if it finds problems. See the link below for additional information and steps.
  Open the printer Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Method 2.
  Given that the printer does not turn off I will also suggest you to check with the help of HP on this.
  http://welcome.HP.com/country/us/en/support_task.html

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• HP F2210 printer will not be closed, and all the lights are on. Tried unplugging don't, no results.

  My Hp F2210 printer will not be closed, and all the lights are on. using a compaq presario with windows xp installed. I tried to unplug the unit. Problem has not been resolved.

  I'm sorry that you are experiencing this issue. Sometimes there may be ink system failures, ink cartridges are bad, or even the printer maintenance needs.

  Here is a link that can help you with this problem.

  http://support.HP.com/us-en/document/c01430567

  Let me know if it helps.

• Door drive DVD/CD of Dell Inspiron 530 will not be closed

  I was in the middle of installation 3 disks of a game, when on the open disc 3, the door kept popping back.  Thought it was a bad drive maybe, so I tried another disc, same problem.  haven't tried any disc, same problem.  I restarted, in the remake, he closed the door, but then reopened it upward once in operation.  It will not be closed the door.  I have to take out them and put it back in or is it turned and I need a new?  It came OEM with the machine, says he works correctly in Device Manager.  in properties, he says that's DVD + RW DH 16 - W15 aPBDS.  If I need a new, where I can go to the web to find what I need?

  Thank you.

  Hey well, good news! Before I decided to replace it, I thought that 'let me play with him' and open the computer and tried to get out.  Well, I got all the cancelled screws and plugs disconnected, but I couldn't drag him completely out of the slot, I tried several times without success.  He would slide approximately 1/2 in. and then stop.  So I gave up, he slipped into place, screwed it back in, plugged everything back in and voila, it works!  I don't know what was going on.  There was a strip of clear band they put on the machines when they send their, a thin strip through the logo Dell Isnpiron on top of the drive with a shot to the back corner, maybe the edge of the door that was contagious?  I pulled it off.  No matter what.  It works, thank the Lord.  But out of curiosity, how one removes this player?  I couldn't go out for the life of me.

• My labtop will not be closed to the right.

  My laptop will not be closed down to the right, the power button works, but the close menu button start menu is not, he will tell disconnected for a short time then say stop for a few seconds, then the screen and the power button will go black but then 3 other buttons start flashing and it lights up immediately I tried the msconfig method and when I press OK it asks me to restart my computer, I have windows 7, please help.  I also tried system mechanic, and I have no virus.  If more details are needed on my laptop please ask.

  Hello

  1. do you get an error message/code?

  2. you made any hardware or software comes to the computer before the show?

  3. What is the brand and model of the computer?

  Method 1:

  Disconnect all external devices connected to the computer except the keyboard and mouse, and then restart the computer. Check if the problem persists.

  Method 2:

  Run the troubleshooter of performance since the link and if that helps.

  Open the troubleshooter of Performance

  http://Windows.Microsoft.com/en-us/Windows7/open-the-performance-Troubleshooter

  Method 3:

  Download and install the hotfix from the link:

  You can't do a computer that runs Windows 7 stops or sleep

  http://support.Microsoft.com/kb/977307

  Also check the link for more information:

  Turn off a computer: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/turn-off-a-computer-frequently-asked-questions

  Hope this solves the problem. If the problem persists, you can write to us and we will be happy to help you further.

• (Redirected) Alienware x 51 will not be closed. Fans and lights still on. Can not enter the BIOS at startup.

  Hello

  My Alienware x 51 will not be closed properly. Fan and lights constantly. I need to hold the powerbutton to shut it down.

  Its an Alienware X-51-purchased around June 2012.
  GeForce GTX 555
  Intel Core i7-3770 CPU @ 3, 40GHz
  8.00 GB OF RAM
  Windows 7 Home Premium

  The problem started when I upgraded my BIOS version A06 to A13 (running A14 now). Now, whenever I turned off my computer, the lights are still up and the fan runs. In order to stop completely, I have to press the "switch" button.

  My warranty expired a year ago.

  Anyone know how to fix this? I suspect there is something wrong with my motherboard, since I can't even get into the BIOS setup when I start my computer.

  Has anyone tried to replace the motherboard? What type of motherboard do need me? Is it possible to buy the "original" Alienware mobo?

  I hope someone is able to help. Comments or suggestions are welcome.

  Anders

  Better in this position in the Alienware owners Club Forum, here:

  http://en.community.Dell.com/Owners-Club/Alienware/default.aspx

  Bev.

• L50 satellite will not start up - request password HARD drive

  Hello

  I hope someone can help me

  I have a laptop Toshiba Satellite L50 and when I start it, it says
  + no boot device please don't restart System.

  It is still under warranty because it was purchased only 6 months ago.
  I took it back where I bought it and they told me to contact Toshiba.

  I'm waiting on a reminder.
  I hope that someone can help you. He also asked that the HARD drive password.

  Where can I find this information?

  Hi Kym

  I guess the L50 Satellite cannot find the boot device (HARD drive), because the HARD drive was obtained with a drive password HARD and without this HARD isn't accessible disk password and the system does not start properly.

  Did you set this password for HARD drive in the past?
  I m request because this isn t password on new laptops. This HARD drive password can only be set by the owner of the laptop

  Of my knowledge if you know n t this HARD drive password, you will not be able to access the HARD disk in such a case, the HARD drive would be useless, and the data would be lost

  That's why I recommend you check if someone put the HARD drive on your laptop password where you n t know the password, you will need to replace the HARD drive and reinstall the system once more.