Service "XE" disappeared after the first reboot

Similar Questions

• Apps de Metro de Windows 8 Pro cannot connect to internet after the first reboot

  Hello

  I have recently installed Windows 8 Pro x 64 OEM, and I noticed after awhile that my store, Stocks, Weather, News,... cannot connect to the internet more. However, all other applications work.
  Even more strange, after installing all the updates, I noticed that I can navigate with my IE on the desktop, but not a single party of metro?
  Long story short, after several relocations (refresh option), I've noticed as a result of behavior:
  1. during the first start after installation, EVERYTHING WORKS PERFECTLY. I can browse, look at the weather, everything store.
  2. when I restart the computer and any time after that, is STOP WORKING.
  Another thing I noticed was that his (SoundBlaster Audigy) card didn't work the first time, but after rebooting, it worked, so I guess something happened after the first reboot?
  It was a clean install (OEM version) and Windows are activated, and I tried signing in with or without live account (no difference).
  Help me please, since this is quite irritating :(

  Hello

  I finally found the problem.
  The invisibility of the active network has pushed me towards the answer.
  biggest mistake I made was using the option refresh windows, because it was useless for my troubleshooting.
  By mistake I chose my first install, public internet connection and the course of the updating of the system did not ask see me that.
  In defining the private connection after clean installation (No refresh, brute force reinstall) makes everything work after reboot and completely solved the problem for me.
  Why the network does not disappear after reboot? It's something weird, and it shouldn't happen!
  The resolution of network problems found no problem, because the internet connection worked, but he had no problem with no network also appear or metro apps does not.
  This should be corrected, as it would be a great help in this scenario.
  TL; DR: Make sure you set your connection on the private sector, or windows becomes crazy and your metro applications do not work (and I also noticed that visual studio could not deploy projects in this scenario, but that's another story).

• Upgrade Windows 8 Pro blocked after the first reboot

  I have a HP Media Center PC m7470n. When I upgraded with Windows 8 Pro disc, after the first reboot, it gets stuck on the Windows form with turning points. He's not going back to XP and when I stop and restart, he goes right back to the same screen. I tried to boot from a hard drive and CD ROM with the disc in. I also tried to do a system restore, but it still maintains just that goes back to the same screen. , I even contacted Microsoft Support and after 1 1/2 hours, I had to let go because I had to go to work and they do not have a solution for me. I am not able to go in Mode safe either. Can someone help me with this update or at least get back to XP so that I can at least use my computer? At the moment I feel that Windows 8 Pro comes to have my computer in an oversize weight.

  Hello

  Thanks for posting the question in the Microsoft Community. If I understand correctly, you can not connect to the computer. I understand that it must be frustrating, but don't worry, we are here to help solve the problem and guide you in the right direction.

  I suggest you follow the steps:

  (a) starting from the DVD of Windows 8.

  (b) click on repair your computer.

  (c) click on troubleshoot.

  (d) click on Advanced options , and then click auto repair.

  (e) follow the on-screen instructions and complete the repair.

  If you are always faced with the question, please respond with more information, and we will be happy to help you.

  Thank you.

• Premiere page do not disappear after the first run

  I just installed the latest firefox (9.0.1) and as usual, the first immediate window rises, explaining my rights etc. It is fine and normal. My problem is that no matter how many times I reboot my computer or browser, this first run page does NOT go far. It's like I'm running my firefox for the first time, every time. How can I fix this so I can just have my choice of the right browser?

  Hi ShadoGazer,

  You should look at this article on this specific issue and Preferences not savedarticle. It should give you all the information you need!

  If this does not work:

  1. Enter about: config in the address bar
  2. Click I'll be careful, I promise you if prompted
  3. In the filter field, type Startup
  4. Double click on startup.homepage_override_url
  5. Delete the text string, and then click OK
  6. Close Firefox and reopen the window to check that it worked.

  Hope this helps!

• BSOD after the first reboot then MDT imaging process

  I am a HP Probook 640 G2 imaging using MDT 2013. Operating system is Windows 7 x 64 enterprise. I downloaded all of the current drivers of HP. My catch task sequence only drivers for this particular model, so I know that's not attract drivers from the wrong model. BIOS is the current version.

  He manages to pass the application OS then runs by a few other things and restarts. Once it reboots it immediate BSOD and gives the codes stop. 0x0000007E (0xFFFFFFFF80000003, 0xfffff880013f802D, 0xfffff88003fe6ec8, 0xfffff88003fe6720

  It will then restart and loop just that over and over.

  Any ideas?

  Thank you for your time in typing this out, but just before you posted this I've thought about it. It was actually the Audio driver that was originally to fail. After that I took the Audio driver on my part of MDT, it ends now Imaging.

• Satellite l350-262 HARD drive failed on the first reboot

  Hi guys,.

  I just bought new satellite L350-262 of amazon.co.uk
  It was delivered today so I started to put in place. It started fine, let me regional selection and networking options, and then it restarted and...
  I saw console message saying "a disk read error occurred...". "that indicates a failure of the HARD drive.

  I restarted and went into the BIOS settings and it appears on the first page of the BIOS that he does not see the drive (can recognize the DVD), but on the priority start screen TOSHIBA (and some) against the HARD drive.

  This problem occurred after the first reboot Windows 7 installation is forcing you to do, I didn't have the chance to create backups, and I can't see windows being installed at all, cause I can't do F8-> recovery which I thought to try as well.

  I think return the laptop it does not work, but before that... you have other ideas?

  Is it worth to make diagnosis of disk? Even if it says disk is ok, how I reinstall/install the system preloaded with no disk backup etc.?

  Thank you
  Greg

  > I think return the laptop it does not work, but before that... you have other ideas?
  I'm afraid, if the disk HARD is not recognized in the BIOS, that means HARD drive failure and you will not be able to recover it with the help and recovery disk or using recovery disc HARD m.
  It s really strange that a HARD drive is dead at first, but what looks like a bad luck, this can happen, because it s a machine

  Usually the HARD drive is under warranty as the entire notebook then you can request a hotfix and warranty would cover everything

  Welcome them

• Reader of CD-ROM/DVD-Rom disappeared after the installation of Service Pack 2

  Why my CD-ROM/dvd-rom drive does not disappear after the installation of Service Pack 2 and how do I get it back? Because before I installed Service Pack 2 I had a problem of code 10 and tried deleting the thing fixing upperfilter, but that did not work, so is there anything else I can do. I have a HP Pavilion dv9000 and it is 3 years old.

  Thank you!

  Hello

  Check with HP, their drivers support and documentation online and ask in the HP Forums about known issues.

  Support HP & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  ========

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
  http://support.Microsoft.com/kb/943104/

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Hi, when I buy an annual service by my credit card, after the first month, for the next can I change the credit card?

  Hi, when I buy an annual service by my credit card, after the first month, for the next can I change the credit card?

  Hello

  You can change the billing information anytime before the next renewal. Please see the link below on how to update the billing information.

  Manage your creative cloud membership

  Hope this will help you.

  Kind regards

  Hervé Khare

• Windows 7 Pro 64-bit not start after the first update.

  Integrated system:

  Motherboard: Version of the BIOS Gigabyte GA-X58A-UD3R revision 2.0: FA

  CPU: Intel Core i7-930

  Memory: 6 GB Corsair PC3-12800 DDR3 Triple channel

  HD: Western Digital Black 500 GB SATA 3 Gb/s

  Water cooler: Corsair H50

  The operating system has been installed and running perfect. Readers for the mobo has been installed and and all is well. I can see everything on my computer, network, disks, programs, Device Manager and etc.

  First update for the system, only the important updates were downloaded and after the reboot, the system will not start. The system to start repairing the system but found no problem and restart again and return to the screen of system repair.

  The operating system has been installed 5 times and I had the same problem after the first update, the system unbootable. I tried to boot from the Windows dvd, but I had the same problem again.

  Can someone help me with this problem?

  Thank you

  M. Vilela

  Hi Danielle,

  In addition to the suggestion of Rock Star, you can try the following steps and check if it helps.

  Step 1

  You can first try to start the computer in safe mode and check if you can boot to the desktop. Access the link below and follow the steps to boot to the desktop. To boot to the desktop in safe mode keep tapping key F8 during restart. Once you see the option to start in safe mode select and press to enter.

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Step 2

  If you are able to boot to the desktop in safe mode, you can access to view the history of update on your computer and search for the error code and the updates that failed to install and post it back.

  To view the update history, follow the steps below:

  A. open the control panel (all items view) and click the Windows Update icon.

  B. click on the link to view update history.

  To view the details of a single Windows Update. Select and right-click on a Windows Update list, and then click details.

  Step 3

  I would say also allows you to perform a system restore in safe mode to see if you can restore the computer to an earlier date when it was working fine.

  To restore the operating system to an earlier point in time, follow these steps:

  a. Click Start, type system restore in the search box and then in the list click on the system restore program.

  If you are prompted for an administrator password or a confirmation, type your password or click on continue.

  b. in the System Restore dialog box, click on choose a different restore point and then click Next.

  c. in the list of restore points, click a restore point created before you started having the problem, and then click Next.

  d. click Finish.

  The computer restarts and system files and settings are back to the State they were in when the restore point was created.

  Access the link below to learn more about how to repair the operating system and how torestore configuring operatingsystem to a point in time earlier in Windows:

  http://Windows.Microsoft.com/en-us/Windows7/what-is-system-restore

  I hope this helps. Let us know the results.

  Thank you and best regards,

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• A sound signal at the top of the package after the first export?

  Hello

  Im getting a beep at the top of the package after the first export. I continue to have export packages a second time. Usually on the second attempt the beep has disappeared.

  No idea why this is happening?

  R

  Philippe

  Hi Philippe,.

  Im getting a beep at the top of the package after the first export. I continue to have export packages a second time. Usually on the second attempt the beep has disappeared.

  No idea why this is happening?

  No, you can work with support to resolve the issue.

  Thank you
  Kevin

• video gets sent back to the main menu after the first chapter

  Last night, I burned this DVD and it was perfect - no error message to check the project.  It burned on a disc very well.  Then I went to bed happy.  I woke up and popped the DVD in a DVD player.  When I hit the play movie button, it plays a chapter only before returning to the main menu.

  So I went to the scene selection, and when I choose the 1st chapter to look at, it's going to do the same.  After the first chapter, it goes back to the main menu.

  If I choose the 2nd chapter, he continued to play through the video normally.

  It makes me carzy, so I thought that I was watching the movie in the preview.   Sound disappears and the video freezes for the first chapter.

  Here are some screenshots of my project and the flowchart:

  

  

  

  Any help is very appreciated.  Thank you!

  Edited to add: after preview freezes, and I close out of it, he says: "unspecified error of drawing."  I just made another preview, just to play the movie and the sound was there, but it froze after a little in the chapter.

  The complete project JPEG is too pixelated to really say much about it and the linked version has a header error and does not open. Can you redo this JPEG and maybe use a PS JPEG about 9 frame? It would also be useful to have a close-up view of the timeline with chapter markers.

  Now, what are the Actions of end for each of these chapters?

  For the Play of All, have you looked in a chapter Playlist? If you create one, with the chapters in any order you want, and then set end of Playlist Action chapter to return to your main Menu, "replacing" the end of chapter Actions. NOTE: I use the term 'override' as a verb and the noun "ignore."

  Regarding replacements, this sounds like there might be still a TAPI on. They can be applied in many places, and it's a bit of work to check all the buttons, chapters, timelines, etc.. They can be literally anywhere and should not be used.

  Forward the new screenshots. Might be something obvious here.

  Last question: how long is your first chapter?

  Good luck

  Hunt

  PS - most of us ignore an "answered", or similar icon and read almost all the wires without worrying.

• Installation on disk external USB - "Closed circle" after the first restart of the installer

  I tried to install on my MacMini Sierra (end 2012, Mavericks) to an external Seagate USB 3.0 drive 3TO. The drive is freshly formatted with utility disk (, logged, etc. extended partition GUID) and retired in good health.

  Installation always fails on the first reboot. On the first reboot, the screen goes black, there is a white Apple and white progress bar that moves two or three times to the right and then clears the screen and dreaded him circle with a diagonal line appears. Force reboot simply repeats the process.

  So, I decided to try and install the Mavericks (the OS on the internal SSD flash of the Mac mini disc) of the partition of the USB 3.0 drive recovery external. This eventually ended up with a white screen, the dreaded circle of diagonal and a widget of rotation for several hours. Force restart it worked and a new Workgroup installation Mavericks was now hard disk external and implemented to date.

  Another attempt to install Sierra on the external hard drive, but this time the Mavericks running on the external hard drive is not in the same way with the dreaded circle and the diagonal line.

  Near ideas, I tried to install Sierra on an old Seagate 500 GB disk firewire external hard. Shock, horror... it worked without any problem.

  Sierra is simply not install on an external USB 3.0 :-(3 TB drive

  Someone has it successfully? Any ideas?

  The saga continues...

  I tried the USB of the FW - same problem Imaging reader drive.

  I tried to start the Sierra - same problem recovery partition USB drive.

  WORKAROUND SOLUTION:

  I plugged the USB3 drive on a cheap Chinese USB2 hub and... Sierra, booted from the USB3 drive! Obviously not ideal speed wise, but it'll do for now.

  Sierra really dislike my external Seagate Go Flex Desk media USB3 drive when it is plugged directly into a USB3 port on my Mac Mini end of 2012.

  [Keep in mind, the Mavericks had no problem installing and running on the drive USB3.]

• Firefox does not open a link after the first; Open ok in new tab front.

  In the last week or two, for reasons not clear to me, Firefox does not open the new links after the first; It is used to open a new connection in new tabs (according to my preference) without problems in the past. Now it does not blink again.

  Over time, I've added new applications and others removed, and, of course, I can't exclude from their role in the problem that I have now. I would appreciate some help to solve this problem.

  You have this problem when running in Firefox SafeMode?
  
  http://support.Mozilla.com/en-us/KB/safe+mode
  
  Do not choose anything at the moment, just use 'continue in safe mode.

  If this is not the case, see this:
  
  http://support.Mozilla.com/en-us/KB/troubleshooting+extensions+and+theme...

• the safari app disappear after the ios 9.2.1 update how to recover?

  the safari app disappear after the update to 9.2.1 on my iPad IOS 2. How the GET it back?

  Bangkk,

  Read the response of diesel valuable0 in Safari missing since iphone.

  

• URGENT::opening multiple files - i have 3 files in my directory... When I run the code I can open a file and read it... but the while loop get blocked after the first iteration... can someone me help or give some indications

  bbmChatDB of public database;

  public static FileConnection fconnRead = null;
  public static String fileReadData = "";
  public static InputStream is = null;
  data Byte [] = null;
  DataInputStream is = null;

  Here is my code...

  I have 3 files in my directory... When I run the code I can open a file and read it... but the while loop get blocked after the first iteration... can someone me help or give some indications

  try {}

  FileConnection fc = Connector.open("file:///store/home/user/documents/BSM/") (FileConnection); "

  If (fc.exists ()) {}

  Enumeration e = fc.list ();

  While (e.hasMoreElements ()) {}

  System.out.println ("files are:" + (String) e.nextElement ());

  play this file
  StringBuffer stringBuff = new StringBuffer();
  try {}
  System.out.println ("opening file")-;
  System.out.println ("file name is:" + (String) e.nextElement ());
  fconnRead = Connector.open("file:///store/home/user/documents/BSM/(String)e.nextElement(),Connector.READ_WRITE) (FileConnection);
  System.out.println ("data length")-;
  If (fconnRead.exists ()) {}
  is = fconnRead.openDataInputStream ();
  data = IOUtilities.streamToBytes (is);
  Ddd = new String string (data);
  fileReadData = ddd.toString ();
  System.out.println ("length of data:" + fileReadData.length ());
  System.out.println ("read data :" + fileReadData);

  }

  } catch (IOException ee) {}
  ee.printStackTrace ();
  System.out.println ("Exception in the read data :")
  + ee.getMessage ());
  }

  }
  }

  } catch (IOException e) {}

  e.printStackTrace ();
  }

  {Finally

  try {}
  If (is! = null) {}
  is. Close();
  }
  System.out.println ("is closed...");
  } catch (IOException e1) {}

  E1. PrintStackTrace();
  }

  If (fconnRead! = null) {}
  try {}
  fconnRead.close ();
  } catch (Exception e) {}
  System.out.println (try ());
  }

  }

  }

  You can recode this treatment so that it uses only:

  e.nextElement ())

  Once a loop iteration.

  Directly at the start saying something like:

  String fileName = e.nextElement ());

  and use fileName everywhere in your loop.

  Also be aware that printStackTrace() will do nothing in your situation, it only works if you catch Throwable.  So make sure you something output all your catches exception and also have a catch (Throwable t) to catch the things you miss, as follows:

  {} catch (Throwable t)

  t.printStackTrace ();

  System.out.println ("Eception exception:" + t.toString ());

  }

  I think your code is thrown an exception and you don't see it.