Stray light does not animate.

Similar Questions

• Police Segoe UI Light does not

  Segoe UI Light does not work in Firefox 8 when you use it in CSS.

  You may need to use additional selectors to get this specific light family group Segoe UI font.

  See this for an example on Arial.

  • [797446/questions/797446]

• Satellite M30: Wireless light does not come

  My wireless on my laptop light is not.
  I switch wireless enabled but the light does not come and my router is turned on.

  Also, I can't check the local networks.
  Could someone help me identify this problem?

  Hello

  The wireless network card is properly installed and listed in Device Manager? To check first please all NICs.

• PPP light does not blink

  The ppp of light does not illuminate & cannot connect 2 sites only 2. Always have access to all other Web sites & email. What can I do to fix this?

  Hello

  These websites is secure? You did changes to the computer?
  What Internet browser do you use?

  Method 1.
  For modem problem, you can contact the modem manufacturer. As far as websites are concerned, I would ask to add these sites to the zone of confidence and check.

  Method 2.
  a. If the problem persists, I recommend allows you to optimize the internet explore.
  See the article below for steps optimize internet explore. Also check if you can access these webistes in mode without modules if you have Internet Explorer 7 or above.
  http://support.Microsoft.com/kb/936213
   
  b. If nothing works to solve the issue try reset Internet Explorer.
  How reset internet Explorer?
  http://support.Microsoft.com/kb/923737
  IE reset warning:
  Please note that reset the settings of Internet Explorer running resets all of the settings defined by the user, including those established by the installed extensions, toolbars and other add-ons for IE by default. This includes all the security, privacy and settings area. Also this will erase browsing history, delete all temporary Internet, cookies, form data files and especially all the passwords.

  I hope this helps.

• CD drive does not open and the light does not work

  original title: single CD player problem

  The problem with my CD player seems to be unique I can't find an answer, or someone else with the same problem online.

  My computer is custom built, the CD player lasted me 1.5 years no problem, not until one day I realize, it does not open and the light does not work on it, I ordered a new drive and installed that one, still does not work. so, I replaced the SATA cable which connects to the motherboard, still does not.

  When I go to my computer the drive appears but when I right click > eject it says: "year error occurred while ejecting CD drive D".  It also appears in devices such as SCSI CdRom Device Manager but I am not sure if it's actually my CD player.

  I also tried troubleshooting http://support.microsoft.com/gp/cd_dvd_drive_problems and no solution.

  WTFFF ideas? I really hope that its not the motherboard

  There are two cables you need to connect to the drive, one for data and one for power.  You must connect both training at work.  If you only have the data cable is plugged and not cable power which would be a possible cause of the problem that you see.

  "Ryanb1290" wrote in the new message: * e-mail address is removed from the privacy... *

  Sorry, im just of knowledge about computer hardware.  you say that I should try a different agreement or another port to plug in?

  I tried to connect on a couple different SATA ports on the motherboard.

• Touch Pad v7.5 light does not, if I turn off the red light button lights up.

  Synaptics Touchpad white light v7.5 works do not, if I turn off the TouchPad, the red light does not illuminate. Is there a fault or is it possible to turn it on?

  The TouchPad seems to work fine

  Thanks for the ansswer...  He solved the problem.

• "Accu full, 100%" but the green light does not illuminate.

  Until today, the light load on the front of the laptop went from yellow to green when the charge reaches 100%. It remains now to yellow.

  No idea why - and how to fix it?

  Thank you.

  Hello

  What brand / model of the laptop?

  If the light does not change to green and the battery is not getting fully charged. Try the methods provided and check.
   
  See the link, then run the Fixit.
  The problems of power consumption and extend laptop battery life
  http://support.Microsoft.com/mats/windows_battery_power_settings/en-us
  Method 2:
  
  Battery meter: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/battery-meter-frequently-asked-questions

• Camileo h10 flash or movie light does not work

  Hey,.
  Does anyone have any ideas as to why flash does not work on my h1o camileo camcorder. ? or the pilot light.

  Thank you

  Neil

  Please help somebdoy!...

• HP 15-an000ni star warsedition: mute buttin light does not light

  Hello

  the mute button does not seem to be lighting up when I press the button pls could you give me some solutions s has I could try to fix this

  Hello

  Try the following.

  Download Realtek HD Audio Installer on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp73001-73500/sp73189.exe

  When finished, press and hold the Windows key and press R

  In the run window, type devmgmt.msc and press to enter.

  In Device Manager, expand sound, video and game controllers.  Right click on the Realtek device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

  When you are finished, download and reinstall the Chipset driver at the following link.

  http://ftp.HP.com/pub/SoftPaq/sp72501-73000/sp72862.exe

  When the reinstallation of Chipset is finished, stop the laptop.

  Disconnect the power adapter and remove the battery.  Press and hold the Power button for 30 seconds.  Reinsert the battery and plug in the AC adapter.

  Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu.  Press f9 to load the default values (sometimes it is f5, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

  When windows has reloaded, open your download folder, right click on the installer of Realtek and select "Run as Administrator" to launch the installation.  Once this done, reboot the laptop and let windows load completely for a few minutes before checking.

  Kind regards

  DP - K

• Droid 2 Global Notification LED light does not.

  I bought my phone about 3 months ago and a few days ago the notification light has stopped working. It does not work for text messages or low battery, basically he "burned." I tried a factory data reset and still no go. I was thinking about warranty replace the phone but I do not do this for some reason. Any ideas or is it fried? I know that I have all the apps that would make it only works do not, so I'm stuck between the hammer and the anvil.

  I discovered what happened, apparently someone else who had the same problem found out that it's a wire loose which caused the problem, and you can warranty replace it. I hope just as if I do I don't have the same problem a month later.

• HP Pavilion 15p189na: Mute light does not

  The led of the button mute on my HP Pavilion 15p189na does not work. I use Windows 10 64-bit operating system.

  BIOS Version/Date Insyde F.11, 08/07/2014

  Processor Intel Core i5-4288U CPU 2.60 GHz, 2601 Mhz, 2 Lossnay, 4 logical processors

  This light was absoloutely work very well, but one day it suddenly stopped working. Good news is that mute the button still works fine but the dead ID light.

  Your help will be much appreciated

  Hello

  Try to download and reinstall the software Realtek HD Audio package on the following link.

  http://ftp.HP.com/pub/SoftPaq/sp72001-72500/sp72139.exe

  During the re-Setup has completed, restart the laptop.

  Kind regards

  DP - K

• HP 15 Notebook: Mute light does not turn off!

  Hey so been having this problem with my light on the button mute. It does not turn off. I checked to see if the volume works and it makes. Mute works but the light just stays on. Help!

  Hello

  Try the following.

  Download Realtek HD Audio Installer on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp72501-73000/sp72968.exe

  When finished, press and hold the Windows key and press R

  In the run window, type devmgmt.msc and press to enter.

  In Device Manager, expand sound, video and game controllers.  Right click on the Realtek device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

  When you are finished, download and reinstall the Chipset driver at the following link.

  http://ftp.HP.com/pub/SoftPaq/sp72001-72500/sp72183.exe

  When the reinstallation of Chipset is finished, stop the laptop.

  Disconnect the power adapter and remove the battery.  Press and hold the Power button for 30 seconds.  Reinsert the battery and plug in the AC adapter.

  Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu.  Press f9 to load the default values (sometimes it is f5, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

  When windows has reloaded, open your download folder, right click on the installer of Realtek and select "Run as Administrator" to launch the installation.  Once this done, reboot the laptop and let windows load completely for a few minutes before checking.

  Kind regards

  DP - K

• Pavillion g6 power taken computer flashing light does not illuminate

  My Pavillion g6 will not contribute to that. Blue light, which is plugged the charger in flashes. I tried another charger. It still does not work. When you press the power button the button light doesn't even light.

  Alpost,

  It sounds like a problem with your motherboard; do you know if the computer is still under warranty? If you are not sure, take a look at this linkto confirm.

  Please answer as soon as possible.

  Thank you

• the ink lights does not work

  Product name: Deskjet 2050 All - in - one J510a

  Copy in black ink not working, warning lights did not show (and never did).

  Product name: Deskjet 2050 All - in - one J510a

  Operating system: Windows 8, 64 bits

  Copy and printing in black ink do not work.  No light warning flashing on the printer.

  Via the computer, I get the black ink levels (bowtie symbol?) is ok, but less than 25%.

  The cartridge ink levels color is close to zero, it is said.  How ever, when copying, the color works nice

  but printing in black ink does not at all.

  I tried to clean the inkheads twice.

  Should I replace both cartridges?

  Why don't show the printer ink level lights?

  Why computer don't warn me about low ink levels?

  Hi @malin_t,

  Welcome to the HP Forums!

  I understand that the ink lights do not work and you cannot print in black with your HP Deskjet 2050, and I'm happy to help you!

  If you have tried everything in this guide, solve the problems of quality Print to the HP Deskjet 1050, 1050 A, 2050 and 2050 all-in - One Printer Series. Then I would definitely consider replacing both cartridges.

  About the ink levels, there should be an icon of HP printer on your desktop. Double-click it to open it, click the picture of the level of ink in the HP Solution Center, and then click the advance tab Setiings, here you can choose if you want alerts of ink to showed immediately or only when you print.

  

  Hope this information helps and have a great day!

• G6 laptop Touchpad No Light & does not work

  Hi This is my first post

  I searched the rest of the forum before making this post and tried all the other suggestions without success

  Information System

  Laptop HP Pavilion G6

  #ABU product number A5H09EA

  Serial number 5CD14477ZK

  64-bit version of Windows 7

  Problem

  When windows starts on the touchpad light is not lit.  It is not turned on and does not turn on the use of the method 'double tap' in the upper left of the touchpad or the small circular ' indentation.

  Since it stopped working I updated the drivers for the touchpad, and no change happened

  Sometimes the 'right click' and works of drop-down list button and the menu appears, but no other function works.

  Sometimes the touchpad works for a short period, but it is "intermittent" and slow and unresponsive.

  Any help you could provide would be appreciated

  Hello

  First, download the latest installer driver Synaptics, on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp53501-54000/sp53851.exe

  Then, open windows control panel, open programs and features, right click on the entry "Synaptics Pointing Device Driver" and choose uninstall.

  When this is finished, stop the laptop.

  Disconnect the power adapter and remove the battery.  Press and hold the Power button for 30 seconds.  Reinsert the battery and plug in the AC adapter.

  Tap here to f10 as soon as you press the power button to enter the menu of the bios.  Press f5 to load the default values (sometimes it's f9, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

  When windows has completely recharged, open your download folder, click with the right button on the setup of Synaptics and select "Run as Administrator" to launch the installation.  Once done, restart the laptop.

  When windows has reloaded, see if now hold the fn key and pressing the SPACEBAR will illuminate the TouchPad.

  There are also other configurable options here.

  Kind regards

  DP - K