support for the preview of Windows 8 for hp deskjet 625c

Similar Questions

• The width of the preview in Windows Explorer screen can be hung on the left side instead of the right side?

  Whenever I open a Windows Explorer window, the preview window to adapt is questionable.  It is anchored on the right side of the window.  Sometimes it's fine, other times, it covers more important data like date/time and file size.  If I have it full screen on my wide screen, everything is great, but when I throw it in my smaller screen, everything must shrink.  Rather than shrink the preview pane, it allows the preview pane cover the most important areas.

  The width of the preview in Windows Explorer screen can be hung on the left side instead of the right side?

  I don't think it can be docked to the left.  I know that the sector details can twisted to put it on the bottom rather than the side (like Vista/7), but the preview pane itself isn't such a tweak.

• I loaded the preview of Windows 8 developer, how can I do a clean install of Windows 7?

  I was stupid and has not implemented a partition on my HARD drive.  I have to do a clean install of Windows 7, which is not too painful because my computer is new.  But I can't seem to start from the disc.  I changed the order in my BIOS but windows 8 charge even without even giving me a startup disk option.

  Hello JordanLeavitt

  Do not try to boot from the Windows 7 support. Instead of starting the Windows Developer Preview and then put in the disc of Windows 7. Run the Windows 7 Setup program and follow the installation process of Windows. I would like to know if it works for you. Thank you.

  EDIT: You end up with a Window.old folder on your C: drive. It's the Windows Developer Preview. You can delete this folder.

• How can I configure via Bluebeam PDF to preview in the preview of Windows 8 pane?

  In windows 7, you can set the Preview file tree pane to preview a PDF file when you click on it once.

  In windows 8, this does not work, even when you set the view organize in the preview pane and the player to the default player.

  All solutions?

  Bluebeam using for PDF files.

  Thank you very much!

  Thank you!

  Your questions:

  Thanks for posting the request in Microsoft Community Forums.

  1. you have to any other PDF Reader installed on your computer such as Adobe Reader?

  > The group uses BlueBeam, although if there is no solution to BlueBeam on Windows 8, I'll ask if Adobe Acrobat Reader is a viable alternative

  2 are you able to view the icon on the right side on the preview pane?

  > The file icon is there with the image of default BlueBeam on all PDF files. No image of the file as an icon is visible.

  3 do you have. what Bluebeam version installed?

  > Xtreme Bluebeam

  4 is this problem specific to Bluebeam? Are you able to work with other programs to drive?

  > Look into it and report back.

  I suggest you to check if you are using the latest version of Bluebeam on the computer.

  > Yes, the latest version of BlueBeam Xtreme is installed.

  You can try the multiple steps that are proposed in the article provided here.

  http://communities.Bluebeam.com/showthread.php?73-thumbnail-preview

  I also suggest to display the query in Bluebeam forums for more support information.

  http://communities.Bluebeam.com/

  > :) Have done in the same time, I posted this Q here! (Don't know if the question was one for Windows 8 or BlueBeam, so I tried to cover my bases... :)))

  Hope this information helps.

  > Thank you!

  I'll look in the above resource links and post an update. It would be swell if you check also come back here as if I find something relevant and I have an another Q I would love your comments!

  Thank you very much!

• Wizard upgrade said platform not supported on the upgrade of windows 8 on xp pro 32 market sp 3

  Hi all, it drives me crazy.

  A month ago I went to install the upgrade of windows 8 on my current xp pro, at that time, put assistant level said no problem, I downloaded (and paid) the upgrade and then everything went to hell.  I ended up having to clean my original xp install to get the computer back in working order.
  Now, I decided to try again with the update (using the same product key, I tried to install with last month) so I went back to my email, write down the product key and click the link to download it again, but this time he wont even let me try.  As soon as the implementation or the Upgrade Wizard works, I immediately the message that "this platform is not supported" and that's what I get.
  As I said, I'm running a clean version of Windows XP Pro 32 with SP 3.  Any advice would be most appreciated.  Thank you very much.

  I just checked the BIOS settings and the XD card was already activated.

  The first time I started the upgrade wizard, which told me that I could indeed be upgraded, then I downloaded the upgrade and installed it.  I had some problems with the download, but nothing that was not easy to fix (I honestly don't remember exactly what the problem was).  Once the installation was apparent complete, I rebooted the computer when you are prompted and I got an error message that the installation has failed and then told me that the computer would come back on my original os.  After a few moments, I received a message that the computer failed to return to the operating system, and the computer restarted and gave me the option to boot windows 8 or windows xp.  I have tried both and neither is feasible.  After trying both, I got a new screen that says my computer need of repair.  I then re installed xp, clean boot from the floppy disk to return back at the beginning and have a computer working again. After all that, I reinstalled all the necessary updates and realized when I tried the original installation, I did turn sp2, but not sp 3 so this time I made sure to get that taken care of first.  And now, well you know where I am now!
  Thank you
  INVI.

• Failure of the preview in Windows Movie Maker

  Windows Movie Maker won't let me not preview my film, why is this?

  Hello
   
  1. this happens with all movies that you preview or a particular movie?
  2. what exactly happens when trying to watch a movie?
   
  Try to restore default Windows Movie Maker settings and check the result. To do this, follow these steps.
  1. open Windows Movie Maker.
  2. click on tools and then click Options.
  3. click on each tab and then click Restore all default settings.
  4. apply the changes and close Windows Movie Maker.
  5. open Windows Movie Maker and try to view the video.
   
  For more information on 'Preview' video in Windows Movie Maker, visit this link:
  http://Windows.Microsoft.com/en-us/Windows-Vista/Preview-video-in-Windows-Movie-Maker
   
  I hope this helps.
   
  Kind regards
  Syed
  Answers from Microsoft supports the engineer.

• Resizing the preview pane Windows problem.

  I want to use the Windows preview pane in Solution Explorer, but the problem is that it automatically resizes a very large size, which makes the structure of folders in Explorer very low.
  Even if I resize it, after closing and re-opening of a pan Preview windows Explorer goes back to its large size.
  Its very annoying.

  Check the screenshots
  http://I210.Photobucket.com/albums/bb228/Jaxx89/PREVIEW_PANE.jpg

  http://I210.Photobucket.com/albums/bb228/Jaxx89/PREVIEW_PANE1-1.jpg

  Jaxx89,

  Thanks for the screenshots, that gives a little clarity. Did you always have this problem or is it a recent phenomenon? Just to be on the safe side, you might want to try to start in safe mode and clean boot in order to eliminate all possible applications as the culprit.

  In addition, a user has found a workaround in the first response in a section of third party here.

  I can't wait to hear back on your part.

  Lisa
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• USB driver is not support for HP Deskjet 1050 j410a.

  My HP Deskjet 1050 j410a is installed on a windows 7 and show a code 37 error message which means usb driver is not supported. I had reinstalled so many times and also restarted the pc but the problem does not resolve itself. kindly help me to solve this problem.

  Hello

  Make sure you first upgrade the driver by uninstalling the HP software and install the latest version below:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=Al-109412-2&cc=us&DLC=en&LC=en&OS=4062&product=4027465&sw_lang=

  If the same continues to try to plug the USB key into a different port on the PC and check any change.

  Then try another device (for example, the disk on the key) and check if you can see a similar behavior, if so the problem may be with your PC Chipset problem.

  If the issue appears only on the Deskjet 1050 and no step has not resolve the problem, try an another USB cable from the printer and check any change.

  Shlomi

• Video lag in the preview/editing window - HD images

  System Specs:

  Windows 7 64 bit

  Intel Xeon W3565 @ 3.2 GHz

  12 GB OF RAM

  Graphics NVIDIA Quadro 4000 card

  1 TB 7200 RPM HDD (OS)

  2 TB 7200 RPM HARD drive (where my HD video clips are saved)

  2 TB 7200 RPM HARD drive (disk Scratch Files)

  Camera: Canon XHA1 (HDV 1080i)

  HD video clips were the .mov file formats came because I used to work on a Mac pro (now on the PC listed above), but first would not, so I converted the files to .mp4 with compressor on the old Mac pro. (Maybe that's the problem? I do not know)

  Whenever I have try and get a glimpse of one of the video clips in the Editor pane, it will play perfectly for 2-3 seconds, but then it starts lagging and is virtually impossible to set in/out points.

  I tried to set my resolution of reading Full, 1/2 and 1/4 and none of them seems to do the trick.

  Here are my settings in sequence:

  http://i.imgur.com/uc3Qt.jpg

  http://i.imgur.com/yZHpb.jpg

  Is there something I missed or whatever it is, that you can suggest?

  Thank you

  I sent the support team calibrated XD decoder and they fixed my problem. For others with this problem, here is the email they sent me explaining in detail the problem + solution:

  Hello

  Thanks for the info and sorry for the problem - we'll put a note about it in our support site but:

  Basically, calibrated {Q} XD decode for WIndows is a codec QuickTime decoding to video that decodes XDCAM HD / EX or HDV QuickTime-hands video frames but calibrated {Q} XD decode do not analyze the MOV file or read the images on the hard drive.

  The problem is the new QuickTime Player 7.7 - for some reason some of the HDV MOV files (not all) that have been created/generated by builders of different hardware/software like FireStorm (or similar) the new QT 7.7 reader generates a bad Atom public error when you try to open/analyze HDV MOV file. Supposedly, we have heard that Apple is aware of the issue and said that it would be addressed in a future release (but not here Apple us)-you can communicate with a FireStore to see if they have more information to update from Apple.

  So the only option is to get down to QuickTime Player 7.6.9 (or earlier version of 7.6) and then this should allow QuickTime Player 7.6 (and conversely Premiere Pro) open the HDV MOV files that have been generated by the FS unit and calibrated {Q} XD decode for Windows would decode the video images which would be handed over to her by QuickTime.

  Once again - sorry for all the problems and let me know if you have any questions!

  See you soon,.
  Calibrated software team

  And here is a link to the old version of quicktime for those in need:

  http://www.oldapps.com/quicktime_player.php?old_quicktime=30

• Windows taskbar: see the previews windows is grayed out. (thumbnails)

  the previews of windows see the (thumbnails are greyed out) I have windows vista and use the default theme of windows vista.  How can I get this feature enabled?  Thanks for your help.

  Hello

  (First of all make sure that you have one) an Aero theme in personalization dialog dialog box and b) the themes service is running in the services (click Start, type services.msc and hit . Locate the themes service and click on it and then start/restart option in the left column).

  If they both work, see additional patches here: http://www.vistax64.com/tutorials/118399-thumbnail-previews-taskbar-enable-disable.html

  Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

• Multiprocessor Configuration does not support the installation of Windows 7 64-bit.

  I'm going as a joint discussion on the multiprocessor Configuration not supported during the installation of Windows 7 64-bit. I have a HP with a motherboard HP xw6200 workstation. The Machine has dual Zeon 3.20 Ghz. the procesors are identical. There bus 800 MHZ front. It has 6 gigs of 400 MHZ DDR2 Ram. I've updated to the latest version of the bios a few months ago. It has worked very well in dual boot with the last pack of 64-bit XP and Vista 64-bit SP1 for a long time. I tried to upgrade using a clean 64-bit Windows 7 installation when I got the error Stop Multiprocessor_Configuration_Not_Supported: 0X0000003E. I tried to upgrade to Vista and XP with the same error message. I also installed a new unformatted disk and tried to install the operating system again through the CD and got the same error.

  Hi ITCoreTeam,

  Welcome to the Microsoft Answers community.

  Test the material under test once, by contacting the manufacturer. The problem is caused due to hardware.
  Cause: This situation can occur if the incorrect processor packages are used or if the BIOS incorrectly allows a processor erratum.

  Download the update available in the link below and install it. It may solve your problem.

  http://support.Microsoft.com/kb/973879/

  I suggest you have a look at the similar problem and the troubleshooting steps by visiting the link below.

  http://social.answers.Microsoft.com/forums/en-us/GettingReadyforWindows7/thread/b993c1f9-A1E2-4023-bc7a-0507189a1b8c

  I suggest you to contact the manufacturer of the computer to update the chipset drivers as you have updated the BIOS of your computer.

  Change (CMOS) BIOS/complementary metal oxide semiconductor settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  Hope this information is useful.

  Let me know if it worked.

  Thank you, and in what concerns:

  Umesh P - Microsoft Support

  Visit our http://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads/ Microsoft answers feedback Forum and let us know what you think.

• Can I install SSD hard drive in the version of Windows XP Media Center 2002.

  Original title: ssd hard drives

  I have a Sony desktop running Windows XP Media Center version 2002. I am thinging about buying an SSD hard drive. I was wondering if it will work

  Hi Mike,

  Thank you for the question to Microsoft Community. I'll give my best to help you.

  From your problem description, I understand you want to find out if the SSD is supported in the version of Windows XP Media Center 2002.

  What is the model number of the computer?

  Windows Media center supports the SSDS. However, when buying, check with the manufacturer if the hard drive is compatible with Windows Media Center operating system in 2002.

• Expand the monitor in Windows 8

  Recently updated for XP window 8 and can no longer extend my monitor. When I insert the second monitor to the port on the laptop, it only duplicates. Devices does not have any other available material. Windows + P says I can't extend to the second screen. What I am doing wrong?

  Recently updated for XP window 8 and can no longer extend my monitor. When I insert the second monitor to the port on the laptop, it only duplicates. Devices does not have any other available material. Windows + P says I can't extend to the second screen. What I am doing wrong?

  Have you downloaded the drivers of Windows 8 manufacturer of video device for your product?
   
  If the video hardware is not supported by the manufacturer under Windows 8... You may be out of luck.  Given to tell you, you've gone from Windows XP to Windows 8 - there is a distinct possibility, which is a pretty old machine for that to be the case.

• Search for text in the option in Windows Search 4.0 Preview pane doesn't work do not

  I use XP SP3.  I recently downloaded Windows Search 4.0.

  When the Windows search results window opens, I noticed that it is possible to search for text in the preview pane.  I click on a file and go to OPTIONS > COMPONENT of VISUALIZATION, but see that FIND is grayed out and unavailable.

  This function worked before, when I loaded Windows Search first; now, it no longer works.  My files have been fully indexed; and I made no changes to the computer since then.  I tried to restart the computer, but there was no change.

  Any ideas? Matthew W. I. Dunn

  Hello Matthew w. I. Dunn, welcome.

  I recommend trying a system restore to see if that solves the problem. Try this:
  1. click on START

  2. click on "all programs".

  3. click on "Accessories".

  4. click on "system tools."

  5. click on "system restore."

  6 follow the prompts shown to restore your system to a date before the problem started. Although the system restore does not target the personal data, it is recommended that you back up all data such as music, photos and documents in case something is not bad.

  Let us know what happens

  Thank you!

  Ryan Thieman
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Where can I download the latest version of the Apple support for boot camp and Windows-10 64-bit software?

  Where can I download the latest version of the Apple support for boot camp and Windows-10 64-bit software?

  give me the link?

  I need the latest package driver.

  -Thank you

  Please use BC Assistant.