USB readers of reformatting to insert (intermittent)

Similar Questions

• Charger C - USB plug-and - adapter USB - C will not fully inserted

  We can insert is more completely the plug of charger USB - C OR USB - C adapter (USB - C, USB - A and HDMI).  They stopped short about 1-1, 5 mm.  Food is always delivered, but a very small movement can cause the power disconnected, even if most is still mainly in.  Data connections may be lost in the same way with potentially catastrophic effects.

  Is this a warranty issue?  It's rather disturbing if USB - C plugs/Sockets can fail if relatively fast especially in this case it's an all-Apple above adapters line and computer.

  Yes, usb ports a and c have a very known issue that no one is really writing.

  Is waved from time to time, the connections inside stops working. Also, I tested the adapter, you speak of and it heats more than all of the time and some time. Sometimes if give you him just an hour or two break and then it goes back to normal. His strange indeed.

  Also, I recommend the update to 10.11.3. There has been many corrections of bugs.

• How can I determine which usb readers will work on my G4?

  I have a powerpc G4 10.4.11 running. I have 1 flash drive that works, and many who are not recognized. I would like to buy a new drive for more capacity (probably old) to use on this computer, but I cannot figure out what to look for to make sure it will work. What is the usb version, I need to look? If so, what works on my machine?

  How are the disks that are not formatted?

• Help move my datastore on external USB drive to reformat with correct block size

  Hello

  I use a Dell PowerEdge 2650 with a 550 GB disks configured in RAID 5 with ESX 3.5i

  When I installed ESX I didn't pay attention to the size of the block. This is the default 1 MB and so I reached the maximum extends. Which means that I can receive only 260 GB on my 550 GB.

  I need to change the parameter to a block size of 4 MB in order to access the entire table.

  But for this I need to move my existing data store that contains a lot of important files for me.

  I have not any currenty server with 260/300 GB of free space.

  I'll try the following:

  1. connect an external USB drive. I have ssh running, but I'm having difficulties to climb. I looked for info, but I am always sick.

  2. If possible, I would like to compress using gzip great records in my data store before moving. Can advise you on the location of the files in the system and if it is possible to do?

  Thank you

  Chris

  It is clear now,

  in this case if your VM's you buy a big enough hard drive 250 GB single VMDK file to copy all virtual machine configuration, not he zip or compress, you can screw all of the data on disk

  I have an idea, depends on the amount of data you have on your virtual hard disk, you can use VMware converter 4.0.1 and clone your VM with discs thin provision, Vmware converter will be "zipp" your VMDK file to the exact size of your data without any risk that would have lost you all your data.

  1 use vmware converter to clone your VM with discs thin provisioned

  2. low source VM

  3. start the VM 'new' and check if it works well

  4. If 4 is OK, stop VM 'nine '.

  5. copy the new virtual machine on your USB key (set the USB you your workstation and you winscp to copy the virtual machine)

  6 remove VMFS datastore

  7. create the new VMFS datastore

  8 download VM to the new data store

  9. creating the new virtual machine based on a VMDK file

  10. start the virtual machine

  see you soon

  Visit my blog

  www.vmwaremine.com

  If my answer is useful, click on some stars

• Have more dialog box AutoPlay options open when inserted a USB drive

  Hi all

  I got a computer of friends to 'State of origin' of his recovery partition. Then, I updated all of the updates from Microsoft (with the exception of .net framework) including SP2 & SP3.
  He used to have a 'motions Autoplay dialog box"open whenever he inserted his USB - stick where it would generally select 'open folder to view files '.
  Now when he inserts, nothing happens at all & the dialog box no longer appears. Go to my computer to find and open the player and he really wants to do that. He just wants that box to open again. If I right click on all disks (including the USB - stick when it is inserted) I find the dialog box, and there again the "promt me what to do" box checked, but is not.
  I can't find someone out there still dealing with this particular issue. any help is appreciated.

  Hello indngvr

  Try the Repair Wizard and see if it helps

  Run with the connected reader

  .

• Recovery Media Creator and USB

  I try to use "Recovery Media Creator' loading on a 16Gig USB drive.
  The program insert me a greater than 12 Gig USB flash drive ask what I do.

  He said while the drive will be formatted and then comes up with "Format Failed (Error Code: 040E49-04-00000000)" and the USB key becomes illegible. Using disk of Windows & tool management I can then format the drive and use it becomes usable with the exception of "Recovery Media Creator".

  I formatted in FAT32, NTFS and exFAT, but none does.
  I tried two USB flash drives, both the same behavior.

  As far as I know, there are no partitions on the disk and I used successfully "Recovery Media Creator" on one of the disks in the past. I want the files to restore another computer, something I've done successfully before.

  I can burn data using DVD but the DVD did not work so I want to try the USBs. I have read some threads in this direction but have not found the answers to date. I'm sure that there is a simple explanation but I'm not.

  Usually, the creation of recovery using the USB flash key support should work fine.

  I read in some other threads that the preinstalled anti-virus software could cause similar problems... so I recommend you to disable the antivirus and other security software... so this should work

  Other guy says that delete the partition entirely and create a new simple volume would also work.

• Presarido CQ5320F: adding usb 3.0

  Added usb 3.0 card slot exp. (MFG by Renesas Electronics), my camera is Manager: NUIDIA GEFORCE with CUDA, controller IDE ATA/LAI, w / Force of NUIDA serial ATA controller (listed twice), update.

  CD program for usb 3.0 is installed.

  The usb 3.0 device requires an Asmedia 106 x SATA controller.

  The usb is installed and the system says it all is ok and when the flash player is installed it lights, it is common but option to open the folder does not come on.

  Can I upgrade my device manager?

  Do I have any options?

  Installation Readme for Asmedia 106 x SATA host controller drive

  I hope that's what you're asking.

  However, I think I found my problem.  The usb 3.0 drive flash I thought, I had, is not a usb 3.0 and usb 2.0.  I have had them buy a new usb 3.0 flash drive today and at the same time check the one I had and it is a usb 2.0 port.  The system is functional with buying one today, not as fast as I was hoping but much more fast anway.

  Some how, some way the first usb is signed and sold as a usb 3.0 with blue insert bit? Now, I will try to get this resolved.

  Thanks for your quick reply, greatly appreciated.

• reformatting laptop computer ("could not unmount disk')

  Hi all

  I gave my mom my 2009 MBP and reformatted the drive. She didn't use it and I tried to reformat then I had my name and ID on it and ended up having to bring the genius bar because I couldn't get out to 'one-grey' PARTITION tab turns out I had to BOOT OPTION on the hard drive recovery in order to reformat the drive of the user (or whatever we call it).

  the problem is that I brought home and he had a password that I was not able to remember.

  so I thought I'd REFORMAT in OPTION STARTING in the hard drive recovery.

  now when I go to the PARTITION tab I try to reformat to one partition and I get an error "could not remove the disc.

  can someone help me find a way to get this disk to a new facility with no connection so I can make it work with her again?

  Thanks in advance

  You can try and use the original CD-ROM of your operating system to format your drive, or you can create a bootable USB drive and reformat your hard disk from there. By starting in something other than the computer's hard drive, you can work around the disk to remove error.

  Create an installer for OS X - Apple support bootable

  https://support.Apple.com/en-us/HT204904

  Use the version of Mac OS X included with your Mac, or a more recent compatible version - Apple Support

  I hope this helps!

• Inserted of Toshiba Recovery Media formatted SD card

  How stupid can be the Toshiba Recovery Media software guy?

  1. I went to use this software to create an image of my Toshiba for safety;
  2. in the options the software had chosen USB flash that I just assumed to be the USB flash 32 GB I inserted the USB door.
  3 - the software formatted my SD card internal instead of my USB 32 GB flash.

  Conclusion:
  All my work and emails from last month, completely lost, stupid can be the developers of this software, to format my USB instead, it formatted my SD card internal?

  Looks like a software bug, and if all goes well it will be resolved by the update

• J8B65PA: Readers of Bluetooth for Compaq hp 15-s006TU with Windows7 64 bit laptop

  Hello

  I recently bought 15-s006TU hp Compaq laptop. I could get most of the readers, but bluetooth and USB readers are not correctly installed. Could someone help me rgarding it.

  --

  Kilo

  Hello:

  You need this driver bluetooth for the Ralink WiFi card.

  http://h20565.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_147890_1

  If the pilot USB3 support for your laptop and driver page did not work, then try one directly from Intel.

  Download, unzip and run the setup.exe file.

  https://Downloadcenter.Intel.com/download/22824/USB-3-0-driver-Intel-USB-3-0-Extensible-host-controller-driver-for-Intel-8-9-series-and-C220-C610-chipset-family

• Bluetooth automated shut-off valve, possible disk external hard usb

  We bought a new iMac, retina 5K 27 "end 2015 when it came out. Since the first day we have been faced with a problem where the bluetooth disconnects, Magic Mouse 2 Magic Keyboard are disconnected and then reconnected. The mouse freezes, and about 3 to 5 seconds later the notification "lost connection" flashes on the screen, then the reconnect upward and will begin working. The entire range of not being able to use the keyboard and the mouse will last about 7 to 10 seconds. It happens randomly, maybe once or twice a day, or more.

  I opened two cases with Apple support, all first, they had me reset the SMC, PRAM, a bunch of stuff. It seems not really to improve. The second said to reinstall the operating system, "do a reset. I still have to do it, mainly because it is a PC brand new and has had the problem since the first day.

  Today, I noticed that the Time Machine backup seemed to start right at the time the connected bluetooth. We have two new Western Digital USB hard drives connected, it is formatted HFS + for the backup Time Machine, another ExFAT for the media and the extra space. Could the external USB drives cause bluetooth disconnection as bluetooth seems to be connected via the USB controller? If so, how do fix us this without disconnecting USB readers? Looks like they shouldn't cause the USB or bluetooth to reset!

  For such an expensive computer, this issue is extremely frustrating, considering Apple support could not resolve. For any help or suggestions much appreciated, thank you!

  Logging HFS +.

  Device name: my passport 0829

  Media name: WD My Passport 0829 Media

  ExFAT

  Device name: my passport 0827

  Media name: WD My Passport 0827 Media

  Unreliable wireless performance may occur when external USB 3.0 devices are close

• Problem with usb boot on Satellite A-50

  Hello
  I had a problem with a usb tip. When I insert a usb key, I can't start my computer by usb. I selected the option of a disk boot, but doesn't run. I have a "Satellite A-50-522. I have to update the bios?

  Greetings,

  Hello

  You can try to press F12 when the Toshiba screen! A small start menu appears. Choose USB - FDD and then it should work.

  Campino Bye

• Statellite M100 does not recognize USB storage devices or SD card

  I had problems with my laptop Toshiba Satellite M100 series read don't not Sandisk SD card in the camera to my son - is a 2 GB card and what I read online, maybe that is the problem BUT the laptop is also not reading any of my devices USB "stick". When I insert the SD card or a USB 'stick' he asks me to install the driver software that is simply stupid. I tried to connect the camera via a usb cable too and it does not recognize the device and still once, claims the driver software device.

  I looked on the toshiba site and have installed all updates that I thought may be justified, I'm also trying to run Windows update (at least every 2nd week anyway so it shouldn't be a problem). I am running Vista Home Edition (32 bit). The USB ports have certainly worked in the past, I don't really want to resort to execution of recovery discs if I have as I don't want to lose all the stuff I've stored.

  Question of the SD Card/USB seems to be a common one, but I can't find a specific patch to this topic or any other tech site, any suggestions?

  See you soon

  In your case, I would do two things.

  First: Check if a new BIOS is available. Search on the Toshiba site and do an update.

  Second: Reinstall the laptop with the recovery discs. I know that you will lose all the data, but you can save it to s DVD or external HARD drive.

• ScanDisk USB Flash Drive problem after upgrade to El Capitan

  After the upgrade to El Capitan, I can't access the vault secure on my USB Cruzer facet flash drive. I have Plug and display files as usual but when I try to open the safe, I get the message ' Scan Disk Secure Access V 2.0 requires San Disk USB Flash Drive. Please insert one. »

  The Flash Player has worked fine before the upgrade to El Capitan and I can still use the files outside of the secure vault but, basically, I cannot now access the secure vault. I'd appreciate any thoughts on how this can be resolved. I only am not an expert so please, keep it pretty simple.

  Sounds like a problem of compatibility with the Secure Access software and the OS X El Capitan of SanDisk.  Try download and install the latest version of Secure Access of SanDisk.

  It seems also be other users having the same problem, you may get better assistance with this through SanDisk.  Someone else said that upgrading to the latest version of Secure Access has solved the problem.

  http://forums.SanDisk.com/T5/SanDisk-SecureAccess-2-0/SecureAccess-2-0-and-El-CA Dube/td-p/347378

• HP v210w - 32 gb USB Flash Drive Urgent help please :(

  Hello..

  I have a HP v210w 32 Gb USB Flash Drive.

  I was copying some stuff on it and all of a sudden it stoped working!
  I tried to open it, but it is said that the partition is not accessible and the media is write protected!

  

  I tried to format it, but it does not work! He said that the disk is write protected!

  

  I thought it was damaged but when I opened the Disk Manager, he was there, healthy and active!

  

  I tried using "HP USB Disk Storage Format Tool", and it has detected, it failed to format

  

  I also tried to use partitions such programs as 'MiniTool Partition Wizard Professional Edition' and 'EaseUS Partition Master' and they detect it as an active reader and healthy! and I can delete it's drive and recreate it, but nothing happens after the application of changes!

  

  What is the problem with my Flash drive?
  I have it only 8 months ago

  is there a solution or hope to fix it and make it work again?

  Hello Meleha,

  Try this to see if it helps.

  Reach
  http://www.PNY.com.tw/index.php?CLS=2&mode=download

  This version corrects HP usb readers that have read-only problem (unable to write to the USB because it says as its read-only).

  USB Flash Driver Format Tool (Ufix-II) is supposed to be the fix more successful by both programs.

  You might need to 7 - Zip installed to extract the .rar file if Windows cannot open it.  It's a free program.

  http://www.7-zip.org/

  You will extract the downloaded file "RecoverTool_V2.00.42_M1223 8CE.exe" and run.