Dell Servers

Hi, I would like to use AHCI for a specific m620 blade, but I have select ahci BIOS and disable the integrated controller (h310) readers are not detected by the server. Is there another part that goes into the Groove of raid to have ahci?I couldn't f

I looked up the largest part of 3 hours trying to figure out how to simply add a simple stand-alone SCSI drive to my system.  Currently have 2 500 GB in Raid 1 drives - and want to leave it like that.  I can not just plug a drive or two in bays open

I need to rebuild a PE with Windows Server 2003 STD 2850, and I can't get the server to read a USB flash drive as a floppy disk. I am using the USBKeyPrepF6 program, but something being guard corrupted the USB key. The only time wherever it seemed th

Hello One of my clients PowerEdge servers had an unexpected shutdown over the weekend. It came immediately after a few minutes, VMs were all running, etc. I checked the logs and noticed that it was an error that read: Event log: feel unexpected: Encl

How can we disable LSI SAS HBA to start? I JBOD connected to it and do not want to analyze and attempt to start on reboot or start the process

Hi all! I have a Dell T410 server and want to update my RAM memory. I currently have 24GB RAM as follows: 3 modules of 8GB RAM Dell certified - 2Rx4 LV of 1333 MHz RDIMMS I like to keep these modules and add extra. Don't know if I can add 8 GB, 16 GB

Hi all I currently have a T710 with 144 GB (8 GB 18 locations).  I would consider up to 192 GB of RAM, the cheapest way possible. I realize that I can't just drag sticks of 16 GB in there, and that it must be prepared in a certain way (some banks in

It is a newly purchased machine without BONES. I tried to install Windows server 2008 R2 Standard but stalled to the point that the drivers for the hard disk had to be loaded. In preparation for the installation I downloaded all the drivers on the ma

We have a SC1435 inherited a new client who has a SAS 5i/r that failed. The customer wants us to try to recover the machine online recoverthe of the 1 73 GB RAID array data. With this in mind, we swapped the SAS 5i/r with a PERC 5i we have in our spa

Hello! I have a dell server in raid1 with SAS 6/IR controller recently, I replaced one of the disks for a new. (secondary drive). They are now with the status ok. Can I just physically move the main drive with the secondary, so the new disc will be t

We have a few r.620 dell poweredge machines... they have 2 dedicated spare parts We want to remove 1 on dedicated to putting in another machine spare parts. I was able to do this. omconfig action storage vdisk controller = assigndedicatedhotspare = 0

Hi, I need the drivers of pre-installation for a: PERC 5i SAS Raid internal adapter, PCI-Express System info: Server PowerEdge 840 Dual Core Processor of 3060, 4 MB Cache, 2. 4 GHz, Xeon, Windows Server 2003 R2 helps you to 1066 MHz, thank you!

We have a RAID0 with two drives, 0:0 & 0:1.  Drive 0:1 failed.  The drive light flashes red, and Array Manager indicates that it is in a failed State.  We have replaced the drive 0:1 with a new drive.  This server supports the hot-pluggable drives, s

This server has perc5 and 3 hd for a total of 208123 MB.  We would like to add hard drives, but not sure if we can.  Is it possible to replace the existing 2 and add another without losing any data. or just add a 4th?  We are limited with perc5 accor

I have a PowerEdge T110.  I have two drives configured as RAID 1.  I swapped the old two drives of 250 GB with 1 TB drives.  I can't understand how I push the Ramdisk to make use of the larger capacity.  The physical disks show the amount of space av

Hello First post - forgive me. I have a Dell PowerEdge 1950 of R3 with basket 4 x 2.5 "SAS/SATA connected to a PERC 6/i. 4 x 1 TB SATA WD red disks are mounted configured in a RAID10, and all worked happily for 6 months. A drive has failed, so we jum

I have a Dell PowerEdge R310 with a controller Raid SAS 6iR whose volume of SATA 2 x 1 TB RAID1 disks. The SAS Raid Controller is a LSI1068E chipset. Now, I bought a new drive to replace a faulty in the RAID1 volume. A bought the drive with Dell 400-

Hallo, I recently bought a DELL PERC's H710p to the address but I can't update the firmware or install the driver. I always get an error like:"No controllers present or detected." First I thought that this is because the PERC H710p is not supported o

Hello world I have a new server PowerEdge R820 and I'm not able to update the firmware of PERC H710 (21.1.0 - 0007, A03) to the latest version 21.2.0 - 0007, A04. I tried with a key USB bootable with the files BACK to the inside, but just update soft

Hi, I recently bought a new Dell R720 server with a mounted H710 perc card. I only have the option to cache of 512 MB so I was pleasantly surprised when I inserted an SSD that gave me the possibility to activate CacheCade use it. This seemed to work