Computer laptop Windows XP do not hibernate / hold

Similar Questions

• computer laptop Windows 7 saves not CD / dvd

  my computer laptop windows 7 is no recorded any cd / dvd... Ive checked everything on my computer and online, but couldn't find a solution! does anyone else have this problem? If so how do solve you this problem? Help, please...

  Hello

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find CMD top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ==========================================================

  After the foregoing:

  References to Vista also apply to Windows 7.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The DVD player does not work after installing Windows 7
  http://support.Microsoft.com/kb/975270/

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
  Setup after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and

  
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and the
  correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry settings for your
  CD/DVD drive someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays
  all devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Computer laptop Windows XP does not start? Help

  Hi I have a windows xp laptop I think that their system eis or something like that... Whenever I start the laptop, he's going on the error you get when your dosent laptop shut down correctly. If I click on start normally the bar will spend about a quarter of the way and then just stayed forever and only safe mode also gets a freeze from then. Y at - it something wrong with the laptop or what. How can I get my laptop to work again... someone help me please.

  It is up to tell you to us what brand of system and the model is... not "system ist or something like that."

  When you choose to start safe mode and you can see all the stuff being loaded and the system crashes, which is the last line on the screen to say?

  If you attached an external equipment, especially USB devices, disconnect everything and then you can see if things seem better.

  If you get an error message windows system config, exactly what he says?

  No error paraphrased messages please!

  It was something like this:

  Windows XP could not start because the following file is missing or corrupt: \WINDOWS\SYSTEM32\CONFIG\SYSTEM

  Which usually indicate some sort of corruption of system files may be a loss of power, aborted reboot or abnormal termination? (This includes the plug pulling, buttons power and removing the battery).  None of this seems familiar?

  If you can boot from a CD, you can create a CD bootable XP (no XP media required) Recovery Console and run chkdsk with correction of errors on the afflicted to start System.

  Here's how:

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget what you have (no XP media required).

  This is not the same as recovery disks that might have come with the acquisition of the system store.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD (do not install UniBlue or the Ask Toolbar - never!):

  http://www.ImgBurn.com/

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

  A good idea before you start things must first verify the integrity of your file system by using the chkdsk command.

  In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

  Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

  Assuming your boot drive is C, run the following command:

  CHKDSK C: /r

  Let chkdsk finish to correct the problems, he could find.

  It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  You must run chkdsk/r again until it finds no error to correct.

  Remove the CD, and then type "exit" to exit the RC and restart the computer.

  You have not to set the BIOS to boot the disk HARD since the CD won't be.

• computer laptop Windows vista may not start

  I have a laptop windows vista that can not boot up to windows

  1. when I on the laptop, it loads a black screen with 5 choices
  1. safe mode
  2 network in safe mode
  3
  4 last configuration:
  5 launch the window normally
  I tried to enter in all of the choices of 5... whatever choice I go, the laptop will just keep loading and loading and loading forever bar and I waited 15 minutes and finally the computer laptop 1 blue screen flash and it has restarted and it loads again to the black screen with 5 choices
  No idea what can do with him?
  Please help me.
  Thank you

  Hello

  ·         What is the full error message?

  .         Were there recent hardware or changes to the software on the computer before the show?

  I suggest you to remove the devices connected to your computer (except keyboard and mouse) external and check if you can start the computer.

  Method 1:

  You must disable the auto restart in case of failure system on your computer and note the error message receive you on the blue screen and you need to post back to us.

  To do this, you must start your computer on the Advanced Boot options , and select Disable automatic restart in case of system error.

  Follow this link provided below to start your computer in Advanced startup options.

  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

  Method 2:

  Follow the steps in the article, and check if that helps.

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart unexpectedly

  http://support.Microsoft.com/kb/958233

  Method 3:

  If you have Windows Vista DVD you can try running the Startup Repair and the Tool of diagnosis of Memory Windows to check and Windows Recovery mode if it helps.

  What are the system recovery options in Windows Vista?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  Alternatively, you can use the command prompt on the recovery mode windows to perform analysis and error correction on a drive letter of your choice by running "chkdsk x:" where x is the letter of your drive. Type the below command on command prompt, and then press ENTER:

  X:\>chkdsk/f

  /F Corrects errors on the disk

  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost

• Network management problem, computer laptop Windows 7 will not find other computers on any network, however all other computers on the network can access Windows 7 laptop.

  Basically, the issue I'm having is that my laptop does not connect to any other computer to access the actions or other files.  Other computers on the network can access my computer laptop shares and files without any problems.  Operating system is Windows 7 Home Premium x 64.

  What I tried:

  restarted
  uninstalling and reinstalling the files and printers, sharing maps and restart after completion
  all disabled firewall
  tried with IPv6 enabled and disabled without change, so it is currently enabled
  tried on a Wi - Fi and the differences are listed below in the section work (work is wireless)
  able to ping other comptuers
  access to other computers is permitted by other computers

  problem extends over several networks, IE I noticed it at home last night and the followed problem my laptop at work this morning.
  The problem is slightly different on the two sites.

  At home:
  I can see the other computers on the network, but I am unable to access it, even if I have permission, but other computers can access to my laptop.

  At work:
  Cannot even find other computers on the network but they can find and access my laptop.

  I have worked on this problem of non stop for several hours and did much more than what is said, but I am unable to remember everything.  I should have been taking notes: P

  Here are the results of the ipconfig/all command (I removed the physical addresses for security reasons):

  Windows IP configuration

  Name of the host...: Radiation-G72
  Primary Dns suffix...:
  Node... type: hybrid
  Active... IP routing: No.
  Active... proxy WINS: No.

  Wireless Network Connection 2 wireless LAN adapter:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Microsoft Virtual WiFi Miniport adapt
  Physical address.... :  **
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes

  Ethernet connection to the Local network card:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. : hsd1.ga.comcast.net.
  Description...: Realtek PCIe GBE Family Controller
  Physical address.... :  **
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes

  Wireless network connection Wireless LAN adapter:

  The connection-specific DNS suffix. :
  ... Description: Atheros AR928X Wireless Network adapt
  Physical address.... :  **
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes
  Address IPv6 local link...: fe80::f4e3:cd1c:6952:eb4d % 11 (Preferred)
  IPv4 address: 192.168.2.7 (Preferred)
  ... Subnet mask: 255.255.255.0.
  Lease obtained...: Thursday, February 4, 2010 10:50:32
  End of the lease...: Friday, February 5, 2010 08:29:36
  ... Default gateway. : 192.168.2.1.
  DHCP server...: 192.168.2.1.
  DHCPv6 IOOKING...: 234890707
  DHCPv6 DUID customer...: 00-01-00-01-12-4C-6E-91-00-25-D3-3D-FC-9A
  DNS servers...: 192.168.2.1.
  NetBIOS over TCP/IP...: enabled

  Tunnel adapter isatap. {1797D168-6FC8-4DDF-8338-4E214119C26D}:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Microsoft ISATAP adapter
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Card tunnel Teredo Tunneling Pseudo-Interface:

  The connection-specific DNS suffix. :
  ... Description: Teredo Tunneling Pseudo-Interface
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes
  IPv6 address: 2001:0:4137:9e74:4ea:2920:b81a:cdc5 (Preferred)
  Address IPv6 local link...: fe80::4ea:2920:b81a:cdc5% 13 (Preferred)
  ... Default gateway. : ::
  NetBIOS over TCP/IP...: disabled

  Card adapt 6TO4 tunnel:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Microsoft 6to4 card
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Asked this question in the Windows 7 forum also because the problem was between windows 7 and Vista.

  Hello

  If it has started, you can try a system restore - an update "might" have caused the problem.

  1. try a system restore back to a point before that happened. And immediately thereafter enter
  Control Panel - Windows updates - top left settings and set it to download and informs you instead
  Automatic. Leave it until you are sure that everything is OK and then you can add them one at a time
  to troubleshoot BUT click right on and HIDE all the driver updates. Also stop at day of drivers like below
  and let this value - manually search for drivers when you think you need. (See how and why to)
  stop day of drivers below.)

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  To uninstall an update if you determine that there are problems - Panel - updated Windows - down left-
  Updates installed - uninstall

  I had completely forgotten the system restore!  While looking into the system restore, I found that when I moved into my new House and has cable Internet installed, the cable technology installed a program of comcast on my computer.  This caused me to not be able to connect with other computers.  After rolling back to install it before it works!   Thank you.

• Computer laptop Windows 8 does not properly connect to 8.1 Win mobile wifi hotspot - connection indicated as 'Limited' (no internet connection)

  Hello

  None of our laptops Win 8 appear to be able to connect to a wifi hotspot (internet sharing enabled, and apart from the wifi on the handset) provided by our Win mobile (Nokia Lumia 635) 8.1, there seems to be a connection between the phone and the laptop, but it is presented as 'Limited' (no internet connection).

  Same phones can provide the internet connection through the internet even setting for laptops Windows 7 without any problem of sharing.

  What additional settings are there to win 8 laptops that require an adjustment?

  Thank you!

  Hi Susanna,.

  Welcome to the Microsoft Community Forum.

  I understand that you are unable to connect your laptop 8 Win to Wi - Fi hotspot. I appreciate your efforts to solve this problem, I'll probably help you with that.

  Check the following Microsoft Help article and if you have activated inhalers of Internet connection on your computer, it will lead to problems of this kind.

  http://Windows.Microsoft.com/en-us/Windows-8/metered-Internet-connections-FAQ

  If the problem persists, try the procedure described in the following Microsoft Help article and then check if it helps.

  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-81&V1H=win81tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  See also the following Microsoft Help article.

  http://Windows.Microsoft.com/en-us/Windows/cant-connect-Internet#1TC=Windows-8

  Hope this helps, please get back to us for additional help on Windows. We will be happy to help you.

  Thank you.

• Computer laptop Windows XP does not start.

  My laptop does not start. When I first put it on the screen says 'we apologize... ". Windows does not start automatically in... "Then the Windows XP screen as it tries to load there is this small blue screen that appears a second microphone, too fast to read, then goes back to 'we apologize...". "screen just keeps looping. I thought that my hard drive was going badly, so I ordered a new. I have XP SP3. Could someone help me please?

  Hi robestes3,

  1. When did you start to question?

  2. you remember to make changes to the computer before this problem?

  Method 1:

  First of all, you can tryLast good known Configuration and check if helps solve the problem.

  Check out the link:

  How to start your computer by using last good known Windows XP Configuration

  http://support.Microsoft.com/kb/307852

  Method 2:

  Step 1:

  If the above method does not work, then you can try to start in safe mode and check if the problem occurs.

  Check out the link for more information on starting your computer in SafeMode below:

  http://support.Microsoft.com/kb/315222

  Step 2:

  If you can boot into safe mode without any problem, and then try to perform a clean boot. A clean boot to check if startup item or services to third-party application is causing this issue.

  You can read the following article to put the computer in a clean boot:

  http://support.Microsoft.com/kb/310353

  If your problem is resolved after the clean boot, and then follow the steps mentioned in the article above to refine the exact source:

  In addition, after you resolve the problem, see the section on how to restore your computer to a Normal startup mode.

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Computer laptop Windows 7 can not find wireless network connections

  My Samsung RV510's laptop had windows 7 on front and without wire worked but recently my hard drive for this laptop broke and I had to get a new HARD drive. Now I have a new one that I installed windows 7 on it and now it cannot find wireless network connections even if there is a broadband router in the same room as the laptop. When I try to connect to a wireless network, the computer does not find.

  You have turned on WiFi?  Have you checked Device Manager to see if your wireless network card has a driver?  The different procedure for Urning edited that WiFi on East and model, so you for each brand will have to read your user guide - I promise he won't give you the leprosy!  :-)  To check the driver, click Start and right click on computer, then click Properties.  Click on Device Manager and look for the entry that says that the network cards.  Click the arrow to the left and look to see if

  There is a! or? next to him.  If so, you must download the driver appropriate from your manufacturer.

  Good luck.

• Computer laptop Windows 8 is not connecting to wifi after update

  My windows laptop 8 recently updated and now I have wifi problems.

  It is connected to my wifi, but won't really go on the internet?
  Makes me crazy lol
  My laptop is an Asus K55A
  Can anyone help!

  It works:

  -> Intel® Dual Band Wireless-AC 7260 more Bluetooth 4.0<>

  -> It works already any WiDi + WiFi + BT<>

  Uinstal all WiFi + BT aplications for before connection.

  Install the sample driver to Win 8.1 64bits

  The sample driver for Intel link

  Œuvres:

  -WiFi, WiDi, BT

  -Skype reception/end calls of the click in the headphones.

  -Sending pictures from phone to computer (Android or Win Phone)
  WiDi - by dragging your finger across the screen.

  (Thanks INTEL who you are). It works, nothing more, I'm sorry.

  Another manufacturer loose hell (Broadcom, Atheros, Keeler),

  My year of life, for the configuration of return!

  

  

  

  other devices---> push their signal---> your card is reduced.
  because do not want to collide with the old maps of wifi technology.
  Your card is smart and gives way to the road, another wifi. :-)

• Computer laptop Windows 8 does not load in front of a black screen. Any ideas?

  My Windows 8 portable (only 6 months) does not load it just starts with a black screen after it has passed windows screen load. Last thing I did on the laptop was an update of the system. Unable to get into safe mode or anything just stuck on the black screen with the mouse cursor. Can anyone help please?

  Hi Stewart,

  Did you do changes on the computer before the show?

  You can follow these methods and check if it works:

  Method 1: Unplug all external devices connected to the computer except keyboard, mouse and monitor and check if the problem persists.

   

  Method 2: If the method above does not help, then you can follow the steps in the below mentioned Microsoft article and check.

  Windows 8 starts with a blank screen after a standard or hibernation

  http://support.Microsoft.com/kb/2756559/en-us

  Thank you. Please come back for any clarification on this or any issue of Windows. We will be happy to help you.

• Computer laptop Windows 8 can not reset/refresh or update to 8.1

  So 4-5 months ago, I got a new laptop with Windows 8, and everything was working properly until I had a nasty virus that locked my screen after connection, I managed to get rid of the virus, but I think in the process of my anti-virus deleted some system files.

  Since then, the Windows Security Center Service has been disabled, and if I click on turn on I get a screen pop up saying "you cannot start the Windows Security Center service."
  It was a little disturbing, but I don't give much thought but recently I wanted to move to 8.1 and it doesn't give me the error 'your Windows 8.1 installation could not be completed', after trying again 2 times I went to check if I could update and see if it works, it has not, after that I tried to reinstall , but which does not work either...
  I want to do a reinstall, recover all the original windows files and keep current partitions, I saved that I need and I'm pretty much ready, my question is how do?
  It work? http://Windows.Microsoft.com/en-us/Windows-8/upgrade-product-key-only
  I got the key and I was able to make a dvd with installation, please help me.

  Hi Mihai,

  What is the brand and model of your computer?

  In the following procedure, you can download the ISO of Windows 8 and create a DVD.

  1. click here upgrade to Windows 8 with a product key, and then click the option "install Windows 8".

  2 run the configuration file (WindowsSetupBox.exe), who will start to download Windows 8 ISO.

  3 click "Install." by creating media

  4 if you decide that the installation program to create USB flash media player, or save the ISO file. If you choose the ISO, the ISO file is saved on your PC and you will be able to burn to DVD.

  Note: When you reinstall the operating system, select the partition on which the operating system is currently installed. No format/select all other partitions that can erase data on them.

  Your computer came preinstalled with Windows 8, you can also contact the manufacturer and verify that they can help you perform Update or reset.

  Hope that the information provided is useful. Do not respond if you need more help.

• Computer laptop Windows 7 does not detect my Xbox 360

  Recently, I bought my used console. My laptop's overview of Windows 8 consumers. Although I didn't have the Media Center option, my Xbox could detect and stream my music, videos and photos from my PC. I've recently returned to Windows 7because the license of Windows 8 has been set to expire January 15. Now, for some reason unknown, my Xbox does not detect my PC or my PC detects my Xbox as an Extender in Media center. I tried everything I could think of and the instructions I found on the Xbox site, nothing done. Before I posted this, I also tried things left to people with similar problems in the answers in this forum. I tried manually assign the IP addresses of my two Xbox and PC, disabling my Windows and the firewall of the router, restart Windows Media Player sharing service, allowing the streaming on my Xbox which appeared in my streaming options, disconnect and reconnect my Xbox and PC on my network of countless times and shout and scream about the whole situation.

  I tried not to open the ports because that I have disabled any firewall that I don't see. I have McAfee installed, but my subscription has expired so I uninstalled. I am at a loss for what to do because I tried everything I read and thought. We have 4 PC in our House and everyone but mine my console can detect and disseminate. Three of the four run Windows 7 Home Premium x 64, the 4th with Vista 32 bit. All the computers are on the same network and all. I tried ping my Xbox to my PC and it timed out every time, but my PC does not detect it in a way because it shows in my options on my PC for streaming media. There must be something with my PC and Windows 7 only because like I said before, everything has worked at the time where it ran Windows 8. Anyone can end this madness?

  Never mind. I thought about it. I restarted the SSDP Discovery service that restarted the services necessary to make this work.

• Computer laptop Windows 8 will not install java

  I tried to download java on my mobile new windows 8, but when I click on the install file, what happens with a box asking "How do you want to open this file" under its there options 'look for an app in the store' or 'more options' but clicking on more options just gives me a list of programs-movie maker, internet Explorer notepad etc. How to get java installed!

  Hello Nick,

  Thanks for posting your question on the Microsoft community.

  I would like to know some information about the problem so that we can help you better.

  You made any hardware or software changes on your computer before the show?

  Thank you for details on the question and your efforts to resolve.

  This problem may occur if the downloaded file is corrupted or damaged. It is also possible that another program blocking the installation of Java.

  I would suggest trying the following methods and check if it helps.

  Method 1:
  Run this Microsoft fixit and check.
  Reference:
  The problems that the programs cannot be installed or uninstalled
  http://support.Microsoft.com/mats/Program_Install_and_Uninstall

  If this does not help, use method 2.

  Method 2:
  Use the steps described in this article and check the issue.
  Reference:
  How do I manually download and install Java for my Windows computer?
  https://www.Java.com/en/download/help/windows_manual_download.XML

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Computer laptop Windows 8 will not let me connect, and the code to reset are not sent

  I just got a new laptop lenovo yesterday, I've set up and it was perfectly fine, I've been in and out of her signature today without any problem, until that earlier. I stopped him an hour ago and now I can not connect, it is said that the pasaword is incorrect when I know it's because I can connect anywhere else for what is right. I tried to reset my password several times but I do not get a code.

  The cat has worked.  Turned on emails telling me that a reset code would be sent received in my Inbox, but the emails with the codes have been sent to my spam folder.

  Thanks for your help!

• Microsoft windows fax and scanning will not start on my computer laptop windows 7

  Microsoft windows fax and scanning will not start on my computer laptop windows 7

  Original title: fax and scanning

  Press Windows key + R

  Type: optionalfeatures.exe

  Press enter

  Expand Print and Document Services

  Uncheck the fax and scan Windows

  Click OK

  Reboot if prompted

  Press Windows key + R

  Type: optionalfeatures.exe

  Press enter

  Expand Print and Document Services

  Check fax and scan Windows

  Click OK

  Reboot if prompted