East - Satellite A60 Pro supports Direct3D?

Satellite Pro A60 does support direct3d? The latest display driver is very old - 11/08/04.

Hello

I think so. You already have all the Direct3D tests?

Tags: Toshiba

Similar Questions

  • Satellite A60 does support Kingston 2 Gb 200pin Sodimm DDR2 PC2-5300 667 Mhz

    Satellite A60 does support Kingston 2 Gb 200pin Sodimm DDR2 PC2-5300 667 Mhz

    Thank you.

    Hello

    Satellite A60 supports PC2700 DDR SODIMM 200 pin like on this page says:
    http://www.orcalogic.co.UK/ASP/ProdType.asp?ProdType=8333&ft=m&St=3

    Only a single memory is expandable! So, you can use only one slot for an upgrade!
    You can use max 1024MB module and memory can be improved for max 1.25 or 1.5 GB. (according to the amount of memory the memory internal)

    The speed of the module can be different! I m not 100% sure, but I guess that the laptop supports a 533 MHz FSB (front side bus) and therefore, you can use the modules of PC2700 memory with 533 MHz speed.

    Best regards

  • Replace HARD drive by another on the Satellite A60 Pro?

    Hello world!

    I was wondering if I could replace my hard drive (4K 40) on my TOSHIBA Satellite Pro A60, if so, please tell me how.

    Thank you!
    Suddste

    Hello

    AFAIK removed some covers if you want to change the HARD drive. Sorry, I don t find any detailed instruction how to replace the hard drive. I recommend you ask the service partner for details.

    Good bye

  • Is it possible to install minPCI WLAN on Satellite A60 Pro

    Hello

    I have a Satellite Pro A60 which was purchased for me around 2002/03. [Satellite Pro Model A60EN number PSA65E] I have always used the net via a USB dongle, which is really annoying and often unrealible. So I was wondering if there are any Wireless internal PCI cards that will be compatible with the laptop?

    I know that I have not already installed, and where the switch for Wi - Fi should be is just a piece of plastic covering a hole.

    Please help me!

    Thank you

    Craig

    Hi Craig

    I'll try to clarify some things:
    To my knowledge, some of the Satellite Pro A60 machines are scalable WLan and others not!
    I think that your laptop is not Wi - Fi scalable because there is no such thing as your antenna switch on the side of the laptop.
    > and where the switch for Wi - Fi should be is just a piece of plastic covering a hole

    In my opinion, there are only two ways to use the WiFi network on this laptop. You will use the same USB WLan stick, or you buy a PCMCIA WLan card that is compatible with your location.
    But these cards are more expensive and USB sticks.

  • Satellite A60 Pro is not booting

    Hello

    I hope someone here can help you. I know that this laptop is old ages, but it's the only one my aunt and she would that he repaired if possible.

    Basically, the question is this.
    You can start the laptop, all the normal lights light up and the screen with the Toshiba logo and 4 icons at the bottom and then... nothing.

    He's sitting there for centuries, showing the logo and nothing more.
    You can turn it off by holding the power button down and turn it back on again, same thing.
    I did this without the disc without the optical drive and HARD. No difference.

    The worst part, without a keyboard input seems to be accepted. I help ESC, F1 and F12 on separate occasions but no change - goes to the screen of tosh, no other movement.

    HARD drive and optical drive turn up, as in they make noise and you can feel their displacement.

    I'm at a loss and need help please!

    Phill

    Hello

    If the laptop is unable to pass the Toshiba start screen, then this would mean that a serious hardware problem has been detected.
    During the startup process, POST (power on self-test) is running (for the POST, you see the Toshiba start screen) and the material is checked. If that fails, the laptop would not boot the system.

    I guess something is wrong with the motherboard. You can see the modules of memory, but in the case where the modules are ok, the mobo may be the troublemaker.

  • On Satellite A60 Pro BIOS recovery procedure?

    Hello after updating of the procedure of flash, computer power not on. (only 3 seconds)
    Bios recovery how?
    Sorry for my English.
    Thank you for your help.

    + English only! +

    + The message was edited by: ADMIN +.

    Sorry to hear that. Unfortunately I m afraid BIOS is screwed up, and you will not be able to recover.

    On this forum I found an interesting thread - http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=54395

    Check it out. Maybe this will help. If not I'm afraid you need professional m help with it.

  • Display problem on my A60 Pro Sat

    The display on my satellite A60 pro features a strip of wide pixelated of 6-7cm at the bottom that hides my mouse cursor and the taskbar. The mouse is still active behind it. Mode full screen using an external monitor is seen. The group changes with my office window or active but is just vertical color bands. What is the problem and can get rid of him.

    Hello, Robert

    Have you changed anything on your device or this occurs suddenly display problem?

    I'm really in idea. If you want you can reinstall the unit with recovery DVDs. If the problem persists it is obviously a malfunction of the display. In this case, you must contact partner in your country.

    If there is some serious hardware issue please let us know.

    Good bye

  • Satellite A60 - question of HARD drive replacement

    I have an old Toshiba Satellite A60. The HARD drive died recently and I'm looking to replace it. I want to know what disk drive specification, the Toshiba Satellite A60 can support. It originally had a MK3025GAS
    HDD2196B ZE01 S 30 GB 2.5 "drive.

    1. I would like to replace it with a larger capacity drive. What is the capacity (GB) and speed the A60 can bear?

    2. do I need to replace it with a toshiba drive or can I use any other 2.5 "drive (Seagate, Fujitsu, etc...)?

    Hello

    As far as I know the old Satellite A60 supports one IDE controller.
    This means that you must use a 2.5 IDE (ATA) HARD drive.
    As far as I know the older IDE controller are limited to 128 GB with 28-bit LBA (address logic bit).
    Then maybe you should start with a 120 GB HDD, which must be compatible, even if the controller would be limited to 128 GB.

    But standard ATA-6 (also called TONGA-100) does support 48 bit LBA in this case, it is not limited to 128 GB. You can check controller HARD drive using tools such as SANDRA or Everest Home Edition freeware soft for the information on the controller built in the A60.

    > 2. Do I need to replace it with a toshiba drive or can I use any other disk 2.5 "
    You can use any HARD drive that meets the requirements (IDE, 2.5)

  • Satellite A60 and energy saving issues

    Hello

    I am facing a problem that drives me crazy. After I formatted my laptop and install Windows XP, I'm never able to install Toshiba Power Saver or any kind of Toshiba Utilities. Setup turns on, but after that, it displays an error message (sometimes just sound no message) and it stops.

    To be more precise:

    I use a Satellite A60-302, with extra addition of 256 MB of RAM. I formatted the C: partition and installed Windows XP Professional (I tried 3 different versions: right XP, XP with integrated SP1, XP with SP2 integrated; just to be sure if the problem was caused by service packs). Then I inserted the CD provided, put in place the ATI card, etc. its pilots respecting order but when it comes to saving energy, the nightmare starts.

    I removed the RAM I added and tried the whole installation by the original Setup process, but no change... My hard drives are well checked for any kind of virus, and the installation process was done with the ethernet cable connected to offshore to prevent any possible intrusion.

    Funny, I remember setting up Win XP Pro on this machine before 3 months no problem at all. The only significant change since that day is the update of the BIOS from 1.60 to 1.80.

    Looks like a "common modules" error but it is not "common modules", on the CD or on the internet.

    Finally, I must say that I can't use my recovery CD because it's Windows XP Home Edition in Turkish, but I use Windows XP Professional English provided by my employer.

    Any help? I'll be delightened if someone could help me.

    Post edited by: sunfury

    Hi sunfury,.

    I imagine you're nettled. But there must be a solution to your problem.

    You are right. There is no common Modules for this machine. Usually the common Modules, all Toshiba tools depend on. It is the main module.

    In your case, it is very important to use a specific order of installation. Normally, you must use the order of Installation set by Toshiba. You can find it on
    http://support.toshiba-tro.de/tools/satellite/SA60/win-XP/install_xp_na_en.zip.

    But there is also another solution. I usually install on this path:
    -OS
    -chipset + display driver
    -audio driver
    -fix for... (all)
    -one other drivers (modem, LAN etc..)

    When you want to install the tools of Toshiba try in this order:
    -Power Sawer
    -Init GST
    -TOSHIBA Hotkey Utility
    -TOSHIBA Hotkey Utility for display
    -Other utilities
    -TOSHIBA Console

    If you want to install SP2, maybe it will be better to do it later. It is also possible that some of the tools after installation of SP2 will not function properly.
    http://support.toshiba-tro.de/Tools/updates/Windows-XP-SP2/mwxpsp2ui-XP-11.zip

    If you still have problems made me know.

    Good luck!

  • Satellite A60-174: system32\drivers\isapnp.sys error

    Hello
    After several nights and using Recovery CD e try my Satellite A60 will not work. Even though I cleaned it and cables everything is new.
    I got this error: system32\drivers\isapnp.sys

    I installed the HDD in another laptop and works very well. If I bring the disk for Satellite A60 I still get this error.

    OR Toshi stays to the debugger DLL when I try to install another version of win XP Pro.

    I think that the RAM or something in the motherboard is broken. Can I change the RAM from the motherboard?
    It would help if I add little ram additional RAM slot?
    (I use only the RAM stock because it is on the motherboard.
    any idea what may be this system32\drivers\isapnp.sys.

    It is said to start the laptop with Win XP cd original and try with a R.
    Well, this back do NOT work in this laptop.
    I can't come to the screen of Windows XP. The laptop will break the instalation before that!

    Konstantin

    Hello

    See this Microsoft Knowledge base article:
    http://support.Microsoft.com/?kbid=315311

    I also read that if the new facility does not resolve the isapnp.sys question then maybe it is a failure of module memory.
    Try to remove the module and test it with another.

    Check this similar subject announcement:
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=11602&MessageID=52873

  • Satellite A60 crashes and restart the cycle - missing or damaged system32\DRIVERS\Ntfs

    I have a Toshiba Satellite A60, who has recently developed a serious problem and is currently blocked in a crash restart cycle. He started with the message "missing or damaged system32\DRIVERS\Ntfs", I've read about this problem on discussion forums, but am still unable to find a solution.

    Currently on start error messages appear indicating a driver is missing or damaged, the Toshiba start page has vertical lines of missing data and on a few occasions it will fully start after a short period of time vertical lines appear on the screen and it crashes.

    I tried a number of bugs:
    * Re installed windows XP pro (formatting the hard drive and renew the partitions)
    * Update the bios on the site of toshiba in version 1.90 (I think that the update also flashes the bios, but would need this confirmation?)
    Swapping the hard drive with a portable, yet no longer starts and HD works fine in another laptop, dismissing the possibility of missing or corrupt files.

    I realize that this could be a problem with the RAM and think that the laptop has 512 fixed to the motherboard, accessable without stripping down, but do not know how to determine if the RAM is the problem. While trying these fixes, I get problems with the start of the player and can only get the disk to launch and recognize the CD about 1 to 10 times.

    Could someone suggest a remedy or a fix I can try? or suggest how they fixed a similar problem. Thank you very much

    You ssounds not very good ;(description
    The hardware malfunction appears to be responsible for the vertical lines on the screen
    If vertical lines appear also an external display, the jury may be wrong.

    You re right, I Googled, and it seems that Sat A60 supports an internal memory.
    As far as I know, this memory cannot be removed and only an electronics could solve this internal memory.
    But are you sure that the internal memory is impaired. The device supports only 256 MB internal memory and other modules are removable
    If you can try to replace

  • Satellite A60: Unable to connect to the internet via a modem - no dial-up

    In my Satellite A60, WinXP Home, when I try to connect to the Internet via the modem of Toshiba, I get error 6: handle not valid, and after a few attempts, I get error 50: all devices connected / request not supported.

    Device Manager / network / card Asynchronous RAS displays an error (black exclamation point on a yellow background).
    The driver is asyncmac.sys = MS Access Remote network serial driver.

    I have:
    -tried to uninstall the RAS asynchronous card, but no luck, didn't say it may be necessary to start
    -modem uninstalled / reinstalled
    -update of Windows XP through windows update
    -update of the bios / modem / network drivers from Toshiba

    No luck, the RAS asynchronous card error is still there.

    Any suggestion?
    Thank you
    Alessio - Italy

    I think that this problem is Windows XP and map Asynchronous RAS, not the modem.
    The modem correctly composed the number, negotiates the user and the password, and then I get error 6 and 50.
    On the internet I found this tip for uninstalling and reinstalling the RAS asynchronous card:
    http://forums.practicallynetworked.com/showthread.php?t=6781
    I followed the instructions and run RArepair.exe.
    It uninstalls and reinstalls the map Asynchronous RAS, but RAS is still in error (the yellow field in the Device Manager).

  • Satellite A60 - 102 - what HARD drive is possible

    What capacity of hard drive used in this laptop

    Hello

    Satellite A60 is a little older series and I think that the laptop supports the IDE HDD controller
    Perhaps the HARD disk controller support for only 28 bit LBA, which means that only 128 GB would be recognized by the BIOS.

    I think a 120 GB HDD should work but I'm not sure if the biggest hard drives would be supported due to mentioned m 28-bit LBA

    Welcome them

  • Mini-PCI I have a Satellite A60-302 - myth or reality?

    Hello!

    I have a Satellite A60-302 (PSA60E-00J030HU) and theoretically there is no MiniPCI slot in the computer (at least it does not mention the Hungarian manual), but the online manual (preinstalled on your laptop) refers to a cover on the bottom as "Cover WLAN", that material incidentally doesn't not part of this model. (And the part of the motherboard under this coverage is not something that resembles a slot MiniPCI, well that according to the English manual and specifications online to some Toshiba Page, I found in the Linux knowledge base, it must be part of this config.)
    Allright, there is no MiniPCI, I said, I should buy a PCMCIA CardBus WiFi adapter. I thought I'll check on the toshiba online store, to be sure, I'm buying quality products. But when I choose 'Specific product Options' and choose my config, the Bank's research concludes _only_ MiniPCI solutions for my laptop, which theoretically (and physically) does not support.
    Is it not a bit strange? :)

    Hello
    beginning of the "742" series machine was delivered with Wifi (Build-in).

    But even if a Mini PCI card would fit in your Machine, the problem is that you have no generation of antenna in.

    These are normally inside the display cover.

    So the best way is to buy a Wifi USB key. His fabulous work but not manufactured by Toshiba.

    Running perfectly with my A60-102...

    Good bye

  • Satellite A60-302: built in DVD - RW?

    Dear Toshiba

    I'm Maria of the Hungary. I brought a computer Toshiba laptop Satellite A60-302, because I wanted something to burn and read CD and DVD. In my view, that can read DVDs and CDs and burn CDs. I wish that mobile knowledge really cannot burn DVDs, or I couldn't do. Please help me and write me as soon as possible by e-mail.

    Thank you.

    Maria

    Hello

    I search in the internet and found that the Satellite A60 302 only supports playback of CD-ROM, DVD-ROM, DVD-R/RW/RAM and for CD-ROM and CD - RW writing because it is a COMBO drive!

    The drive is set up and could not be changed by a technician!
    Here is some additional information:

    Read:
    CD-ROM, CD - R 24xMax
    CD - RW 12xMax
    DVD-ROM 8xMax
    DVD - R, DVD - RW 4xMax
    DVD-RAM 2xMax

    To write:
    CD - R 24xMax
    CD - RW 4xMax

    Bye and Merry Christmas

    Bossi

Maybe you are looking for

  • Can I use still images high resolution in Keynote?

    Prepare a presentation in Keynote that requires a lot of photos/movies - it is to be broadcast from an international conference in the world.  So I don't want to spoil. I have some high resolution photos (the originals were RAW, I converted them to P

  • Satellite L300 - transformer power supply makes light rattling

    Hi, thanks for reading. Recently, I noticed that when my laptop is connected to the power supply, the transformer makes a slight sound of rattling, just loud enough to be heard on a movie running at full volume, but not loud enough to be heard unless

  • Problem of satellite C series CD/DVD writer

    If I try to copy pictures from my laptop on a CD it seems to go through the process gives then a message "check failed". Same thing happens with a word file. Also, it seems a little hit and miss what happens when I try to run the copy.

  • Is there a way to locate segments of a reference to another image image?

    Is there a way to locate segments of a reference to another image image? We need it in our project in order to be able to compare segments of a reference image (in our case, our topic is a PCB) and another image (another PCB) without taking account o

  • Review of SL

    http://www.NotebookReview.com/default.asp?NewsID=4499