My Vista won't load fully,

Similar Questions

• Re: Equium A200-1V0: Vista won't load - system restore does not

  Toshiba Equium A200-1V0, purchased January ' 08
  Vista Home Premium

  Upgrade office 2007, rebooted fine, saved all the files. I went looking for vista security updates & Office including. Net3.0 - pc crashed during installation. F8 to repair pc & system restore to front office installed. everything seemed well & rebooted ok so I have backed up all critical files.

  reinstalled office 2007 & vista hanging on the required reboot.

  Try to load in safe mode & vista hangs at crcdisk.sys. It was suggested to remove all pcmcia & 1394 drivers, but the switches/s/p do not work in command prompt so I can't be sure enough to find them all to delete or rename.

  F8 for pc repair & while the menu appears, it is very slow to get there.
  Startup Repair detects no problem, System Restore won't work, so assuming that restore lost points (there were a few elders before the one I went to). Command prompt will run.

  Toshiba has provided a system restore disc, but crashes after language selection. It was suggested that the disk was duff, so I downloaded the ISO to a disk of vista without the extras toshiba restore & that said it is loading & then sits right on the blue/green screen of vista.

  I have a basic family official OEM of Vista editing copy for a new machine, I do build, so tried to boot from a full installation of windows (without formatitng) - this also hangs on the blue/green screen of vista. This is my first to face with a laptop without a correct installation disc, so if I format & reinstall the will I lose the recovery partition?

  Any other ideas of what to try?

  Hello

  I think that it s nothing wrong with the software, but with the hardware
  If the reinstallation of Vista is not possible then this could be caused by a hardware problem
  I can only suggest on the malfunction of HARD, RAM disk. Everything is possible

  If I you would be then I would format the whole HARD drive I would be to delete all partitions and would try to reinstall the operating system from the recovery CD

  If it is not possible, then you should ask the ASP in your country for a control from laptop s!

  Good luck

• web pages of Windows vista won't load using multiple browsers.

  Windows Vista, 32-bit.
  Card mother with an AMD processor - built Gigabyte in 2009.

  Computer has worked for a few years, however, now, he can not complete the loading of most web pages.

  Using multiple browsers (IE, Firefox and Chrome), we see the same behavior - web pages do not just end.
  Sometimes update gets more of a page - but for videos (youtube and other sites) - it is almost impossible to load a full clip of more than 2 minutes.

  Ping/tracert works very well.
  If passing through the VPN + desktop remotely, things work very well (this confirms that he is not the access provider when you use remote desktop, we are no longer local + all device drivers which could be the problem).
  Windows Update, seems to work very well.

  Download files from a web page, does not work.

  The computer is currently connected via Ethernet (not wireless).
  We have tried this on two different networks, so it is not associated with ISP.

  We tried to connect a USB network adapter - thinking it was hardware related, but that has not changed anything.

  We have tried to start in safe mode with networking - and it still does not work (so probably not the program antivirus - mcafee).

  I was able to get a live LInux OS running on the pc, and he had no problem loading the pages/videos, ect - what is not strictly material.

  I tried using some of the Netsh command to reset tcp/ip stack - but they don't solve the problem.

  I do not think that it will fix a Vista startup repair, but I advise him to try to do.

  I'm looking for any other suggestions in addition to switch to Linux full time.

  Thank you!

  Hello

  Method 1:

  I suggest to perform a restore of the system and check if it helps.

  What is a system restore.

  Follow the link below and check if that helps.

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

  Method 2: Reset TCP/IP.

  Follow the link below and reset the winsock TCP/IP settings and check if that helps.

  How to reset the Protocol Internet (TCP/IP)

  http://support.Microsoft.com/kb/299357

  http://support.Microsoft.com/kb/811259

  Let us know if it helps.

• Windows Vista won't load: 0x800701E7 error code

  I built this PC using a year from a friend. He put a valid XP pro OS on the computer. It worked fine until the beginning of this year when he died. I took it to my local PC repair shop and they replaced the motherboard you PSU and CPU. I tried since loading this back BONE with no luck.

  After returning the computer to the shop, they said they have fixed the bios...? In any case, I have since bought a key drive and windows vista product. My PC starts to install vista but gives with this error. It is vista ready as I have the correct specifications to have.
  Can you please help me in this case.
  Thank you

  Hello

  You can run the Windows Vista Upgrade Advisor to see if she sees some problems with the upgrade to Windows Vista.

  This error message indicates a problem with possible hardware driver.  Can you please send your hardware specifications for us?  In addition, installation when you get the error and the error message contains more information?  Please let us know so that we can help you with your problem.

  Thank you.

• Windows Vista won't load - black screen each laptop time starts

  I have a Dell Insipron 1525, which does not load Windows Vista.

  I can't go past the Recovery Manager screen every time you start, and although I tried all the options available, it does not open in safe mode or normally.

  I tried the system restore (even if it says that it cannot find valid 'points'), as well as the repair of the system, and I have also run the Diagnostics, who said there is no error (although I could not see the final report). All paths lead ultimately to the black screen and although I can see and move the cursor, it is that I can get. Any ideas please?

  Thank you very much!

  Hi ZD_123,

  ·         Did you the latest changes on the computer?

  ·         You receive an error message?

  I suggest you follow the provided article and check if it helps.

  http://support.Microsoft.com/kb/946532

• Windows Vista won't load disc

  Windows Vista 64 bit frozen and would not.  After reading the book has decided that I should restore disk factory.  Press F12 by following the instructions (I did all the retore point Jules Destrooper, no go).  After hitting F12 it says press F1, set thinking it would reformat the disk drive.  Instead it loaded Vista and it works.  Now, whenever I start the computer it shows the line F1 and I have to insert the disc to load.  What happened.

  Hello

  ·         Which version of Windows Vista you are using?

  ·         What is the brand and model of the computer?

  Regarding the recovery DVDs that you get F1 option before you start, you can try to contact your OEM (manufacturer, i.e.) for assistance.

  I hope this helps.

• Windows Vista won't load on my computer

  My Windows Vista computer does not load upwards after I log in.  As soon as I connect you I get an error message: "Windows Explorer has stopped working" followed by "Restart Windows" and then it never restarts.  I soon begin to receive error message that State that the other programs that try to load do not have managed to do.  I tried to reboot in safe mode, but I also have the same problems in safe mode.  I try to run a restore msconfig.exe and system, but the error messages will be displayed until I can get the controls and prevents me from doing anything.  The problem began Tuesday night 03/08/10 after I installed a router on my modem for wireless internet for laptop of my wife.  The router is a D-link router.  I think I might have to reinstall Windows vista, or at least try to fix it, but I was not apparently received a Windows Vista disk with my computer when I bought it from Best Buy.  Very frustrating to be sure.  Any help would be greatly appreciated.  Thank you.

  If the system or Mode restore safe work not and you do not have a Microsoft Vista DVD, make a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• Satellite A300 - Vista does not load, the computer does not start

  Satellite A300
  Model number: PSAGCA-02W010

  Vista won't load; have you tried to start repair; System Restore and boot in safe mode, none of them work. I get the error "error 0 x 80070570: the file or directory is corrupted and unreadable."

  I don't know what I did with my recovery CD; or if I even got one with my purchase (from Harvey Norman).

  Please tell us what can be done.

  Hello

  What you can try is to install Vista using disk HARD recovery option.
  How it works, you can read on http://aps2.toshiba-tro.de/kb0/HTD9102IR0000R01.htm

  If it works all the data saved on the C partition will be deleted but the data saved on the D partition will always be there.

• My toshiba satellite won't load my new battery, or former

  ORIGINAL TITLE: battery

  My toshiba satellite won't load my new battery, or the old, the icon shows activity concluded for a few seconds then it stops

  Hello

  References to Vista also apply to Windows 7.

  Check with support from the manufacturer of their books online and the drivers and their forums system
  (as applicable) for known issues. Some manufacturer issued BIOS and other updates to help the battery
  problems.

  Toshiba - Forums
  http://laptopforums.Toshiba.com/

  Toshiba - Contacts
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/navShell.jsp?CF=su_contact

  Toshiba - drivers - access your model
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=download

  Toshiba - Support
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  ================================================================

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  =================================================================

  Other information that might help:

  Control Panel control - plan change Options - power plans - power - advanced settings
  Parameters for the drainage and the use of parameters (this is how much to use and not how much or how)
  long to load).

  In fact, what causes a lot of wear on a battery empties it too low on several occasions. With today
  systems overload are not a problem.

  Here are some tips to help and troubleshoot battery issues.

  Old battery? Unplug the power to the computer - remove the battery and clean the contacts with a pencil
  eraser (do not use this, if your battery is fine slots - just clean up the edges of the knife which fit in)
  them and be careful). Batteries are old, or it could be a problem with the computer.
  Check with the support of the machine system, and many of them have online forums.

  New Lithium-Ion type battery usually last longer if you do not unload their less than 30%
  However on a laptop that not extend their life a lot. Best is to use the a/c adapter
  When this is possible.

  I use the free version of BatteryBar to monitor my battery. Click on the green button on the
  Yellow box on the right side of the page to download the latest stable version.

  BatteryBar - free version available
  http://osirisdevelopment.com/BatteryBar/index.html

  Another good program

  Vista battery saver - free
  http://www.codeplex.com/vistabattery

  Problems with the lives of its use and the battery of power - Mr Fixit
  http://support.Microsoft.com/GP/windows_battery_power_settings

  You can also check with the manufacturer of system and forums that many use their own
  proprietary software to monitor the battery and they could be known problems with your battery.

  ============================================================

  Taking care of your laptop battery
  http://Windows.Microsoft.com/en-us/Windows7/taking-care-of-your-laptop-battery

  Battery meter: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/battery-meter-frequently-asked-questions

  Battery saver
  http://Windows.Microsoft.com/en-us/Windows7/conserving-battery-power

  Solutions to common battery problems
  http://Windows.Microsoft.com/en-us/Windows7/solutions-to-common-battery-problems

  What is the precise the battery meter?
  http://Windows.Microsoft.com/en-us/Windows7/how-accurate-is-the-battery-meter

  ============================================================

  Try this - to make a Restore Point

  How to create a System Restore Point in Windows 7
  http://www.SevenForums.com/tutorials/697-system-restore-point-create.html

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  Then Control Panel - Manager of devices - Batteries - Double click on each item - drivers - tab
  Update the drivers (which can do nothing) - then do a right click and UNINSTALL each - RESTART
  who will update the driver stacks.

  Problems with the lives of its use and the battery of power - Mr Fixit
  http://support.Microsoft.com/GP/windows_battery_power_settings

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Vista does not load a black screen with arrow

  Windows Vista will load only a black screen with the white mouse arrow.  I can move the arrow but by pressing the keys (including ctrl-alt-del and ctrl-shift-esc) does nothing.  The only way to turn off here is to press and hold the power button.  Same thing in safe mode.

  I tried the "Repair your computer" option (F8, or from the Windows DVD).  The Startup Repair option says that he finds no problem.  There is no restore point on the computer if it is not an option (it isn't my computer, the person who owns it is said that there should be a restore point, but if there is, the computer can't find it).

  The Dell (F12--> Diagnostics) system diagnostics found no problem (I'm sure this isn't a hardware problem).

  I tried to do a "repair installation" as in Windows XP, but this isn't an option in Vista.  The closest thing is an upgrade installation (boot from the Windows DVD, select install, upgrade).  But this option is grayed out, and he said to level I have to start the installation of Windows.  But of course Windows won't load.  Very smart Microsoft...

  The only option left is to do a clean install.  All programs and files are saved if we have all the data.  It will be just to save a lot of time and hassle if I can avoid it, and I'm surprised that such a feature/option useful XP has disappeared from Vista.

  Any ideas how I can fix this without having to do a clean install?  Thank you!

  Hello biznatch.

  Thanks for posting on the Microsoft answers Community Forum.

  Unfortunately, after trying a startup repair and hovaing, restore points is no longer to go to resettlement is all that remains to be done.  Excuse me, but this is what must be done.  It is excellent that you have already backed up your important information.

  Thank you
  Jonathan

• Windows Vista does not load all the black white backlit display.

  I'm repairing computer of my aunt. It's a laptop gateway M-6320. Windows Vista. It loads the bios and goes through the MAIL. After the POST, it just goes to a screen backlit black white with no mouse and nothing happens.

  Tried to change the boot order to boot from the cd first and put the disc of windows 7 in to run a repair (I don't have a vista cd), but it does not always load. everything sounds like it turns on and works fine. the dvd sounds like it runs for a few seconds. I also tried to boot from usb with windows 7 there. still won't load what it is. I took out the battery tested cmos it is 2, 5V. I think it was. still nothing. I left the computer for a whole night. still nothing. I changed the hard drive even though it sounds like it's working. still nothing. I even tried a windows xp cd in the freak chance, it was a bad cd. and nothing is connected to the computer while I'm trying to start. He's not going for advanced options or to try safe mode.

  I also tried to put the memtest on USB, but it will not load anything from him even with usb as the first boot option. and I tried different usb drives also.

  I can't figure what's wrong... my only thought is that the bios is corrupted or the RAM is bad. Anyone have any ideas? Oh and the bios is Phoenix

  Hello

  Since you've already tried all the troubleshooting steps, including booting from a Windows 7 disc to repair the Windows installation. If all else fails, then I think that
  It's a hardware problem. I suggest you contact the manufacturer of the laptop computer or take it to a tech store to get help.

  Kind regards
  Afzal Taher - Microsoft technical support.
  Visit ourMicrosoft answers Feedback Forum and tell us what you think.

• Windows 8 update won't load

  My computer Windows 8 acted as weird after I have updated to 8.1 that according to me. Windows Movie Maker does not recognize the files that it used to recognize. My Google Chrome acted a lot, just like my files. But the worst is that I can not reset my computer to factory settings to solve this problem. When I try to reset it to factory settings, it just says, "no changes."

  It is very frustrating and so now I have to see if my computer update will fix all this. My computer tells me that I am due for an update when I login, but when I go to

  Settings PC > Windows Update

  The Windows Update screen will load, load and load and I'll it let it charge for hours and hours, but it keeps loading. Never, he shows me the update I need. There is also no error code for the update because it won't load at all.

  It's frustrating because I don't understand why I can't reset my computer completely or update. I did the research for hours and hours to solve this problem and I became irratible trying to fix computers.

  I think that all this comes from the update and I can't fix it. I had a lot of people try and fix it, but usually, I'm able to fix computers or searching for the answer to fixing it, but not this time.

  If someone knows the solution to this problem, feel free to respond. I ended up getting tired of all these questions and I don't know what else to do.

  Thank you.

  Hi Kaitlyn,

  I imagine the inconvenience that you are experiencing. We are here to help and guide you in the right direction.

  To better understand the issue, I would need more information on your side.

  1. What is the number of brand and model of the computer? (So that I can help you find the device drivers on the site of computer manufacturer)

  2. what measures all troubleshooting have you tried?

  This problem might have occurred because of these reasons:
  1. lack of Windows updates.
  2. If the device drivers are not updated.
  3 corrupt system files.

  Before you start the troubleshooting steps allows you to download and install the latest device drivers for all devices in the computer manufacturer's website. Check if it helps. If the problem persists, try the steps listed here and see if it helps:

  Method 1:
  I suggest you to reset components Windows Update, which fixes corrupted Windows Update components and help you install Windows updates.
  

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the the Microsoft Knowledge Base:

  
  Method 2:
  If the problem persists, I suggest to start the computer in Mode safe mode with network and check if the problem persists or not. If the problem does not occur in Mode safe mode with networking, you can set up your computer in a clean boot and check if it helps.

  
  Step 1:
  Start the computer in safe mode with network. In Safe Mode with networking starts with a minimal set of drivers and files.

  Start settings for Windows (including safe mode)
  http://Windows.Microsoft.com/en-us/Windows-8/Windows-startup-settings-including-safe-mode

  If the problem does not occur in safe mode with network, try step 2:

  Step 2:
  Set up your computer in a clean boot state. Setting the system in a clean boot state will help you determine if third-party applications or startup items are causing the problem.

  How to perform a clean boot in Windows
  http://support.Microsoft.com/kb/929135

  Note: After the clean boot troubleshooting steps, see the "How to reset the computer to start as usual after a clean boot troubleshooting" section in the link provided to return the computer to a Normal startup mode.

  
  

  Method 3:
  If the problem persists, you can run the audit and the auditor of file system (CFS) tool if this solves the problem. SFC scan would be a system file corrupt on the computer search and replace.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  Hope this information helps. Reply to the post with an up-to-date report of the issue so that we can help you further.

• I installed Safari 10 update and now Safari won't load - ideas?

  I installed Safari 10 update and now Safari won't load - ideas?  In addition to the menu drop down go to preferences do not load.

  Writing an effective question of communities to Support Apple - https://discussions.apple.com/docs/DOC-5931

• Games won't load on Slingo... What do I do?

  Slingo turns on but when I try to play games; the games won't load

  May communicate with the site, and regarding the help.

  I can get into this site for example http://slingo.com/sgs/sample/1#ctrGame

  but probably I need to register to go further, and I have no interest in doing it. If it's a site that you can normally enter without registering have you tried with IE it works, so then post back and we'll see if there is anything, we can study together.

• Satellite Pro P200 - 17 c: Win XP won't load - installation of the SATA driver

  Hello

  I have a satellite pro p200 - 17 c I've had good years, allways worked without any problem.

  Last week when I booted the laptop, windows won't load and I find myself safe mode selection screen. No options whatsoever me to windows loading, I tried F8 and still nothing.

  I tried the restore cd that reimagee the drive but I get the same thing, I tried a new hard drive, once again the same.

  But if I try to load windows from an OEM to install that software does not because it is a sata drive and there is no floppy drive. I have an external floppy drive I use, but it is not known now.

  Any ideas or suggestions?

  Hello

  Go to BIOS and set it to default settings.

  In this case the SATA mode must be on AHCI. In this case the SATA drivers are required to install the Windows operating system. But as much as I know that Windows 7 already contains the SATA drivers if usually you don t had to add SATA drivers while OS installation the installation program.

  However, here is a nice HowTo document that helps you add SATA drivers for Win XP installation disc.

  + How to integrate a SATA AHCI driver into a Windows XP Setup CD.
  http://APS2.toshiba-tro.de/KB0/TSB85017Z0000R01.htm

  + How to integrate the AHCI driver during the installation of Windows XP.
  http://APS2.toshiba-tro.de/KB0/HTD9401AN0000R01.htm