problems printing e-Studio 160 / factory reset

Similar Questions

• HP Photosmart C4780: Factory Reset for HP Photosmart C4780

  I recently started using a new wireless router after a move, and I'm able to get my computer and my printer on the same network.

  I tried to figure out how to change the network that connects the printer, but I was completely failed. I did a lot of searching around, and nothing seems to work. For what it's worth, I had all the last printer and driver software with the software update feature on my Mac. I am also able to connect to the printer and print using a USB cable. But I'm completely unable to access all the settings of the printer that would allow me to move the printer to the same network as the computer. If anyone has any suggestions, please let me know.

  I think that if I could get the printer to do a factory reset or a hard reset, that might be a better place to start. I think that the printer has some memory kept the old wireless network, because this network name appears on one of these pages, you can print troubleshooting. But if the printer didn't remember any wireless network, then it might be easier to implement on the new wireless network. Unfortunately, I can't find any information on how to do a factory zero either, so if anyone knows how to do, please also let me know.

  Hi @rumsmuggler

  Forgive me for the delay in my response.

  It's strange, that it must continue to blink and only go solid once your computer is connected to the network printers.

  It could be the wireless radio no longer works properly, I will send you a different reset in a private message, please check the little envelope on the upper right of the forums page to check your Inbox of Forums.

  

  Then you can try the steps again.

  Please let me know if these steps solved your problem, or if there is anything else I can do to help.

  I look forward to hear from you!

  Thank you

• How to get factory reset disks for Satellite Pro L40?

  Hi all

  Ive got someone other Toshiba Satellite Pro L40 attempt to fix, it got a virus, and the best way to solve this problem is to do a factory reset, so I copied all the personal files on DVD and went to do a factory reset, but told me that I need the discs...

  But apparently, this laptop was given as a replacement by an insurance company, and no records were provided, then how to to get the disks?

  Thank you
  Angus

  Hello

  Not sure if you will be able to order this disc from this page:
  https://backupmedia.Toshiba.EU/landing.aspx

  Sometimes these disks cannot be ordered if the notebook series would be dropped.
  In any case, check out the page and try

  It may be possible to order this disc

• A1-07 Factory Reset

  I want to erase my A1-07 by doing a factory reset, it has been in place lately, himself, slow restart, shutdown process.

  I upgraded to ICS, last summer, if I do a factory reset would he still ok with this upgrade, or will I have problems later?

  A factory reset from the settings screen, load a clean copy of the operating system currently installed. It does not load a different operating system. It deletes all the data user installed apps and customizations.

• Slow start even after factory reset

  After significant problems, mainly increasing the response slow time, which no longer responding, slow start, not being not able to uninstall the software and do not restore to any point windows recovery, I performed a factory reset.  I was running Kaspersky, Eset and Malwarebytes - I think that this is the final fall of the computer, but it has never been declared malware that has not been set.

  The problem is, even after the factory reset with NO other programs installed, I'll still have a slow start.  This should not be the case, right?

  I don't know what information you need to help me understand this.

  I am running Windows 7 Home Premium 64 - bit OS

  Dell XPS

  8 GB RAM

  2.1GHZ processor

  Do I need to take for professional diagnosis?

  Hello

  Thanks for choosing Microsoft Community

  Download HD Tune Pro from here and install and test the HARD drive

  If the test result will be put into custody, Contact Dell for HDD replace. I hope that the HARD drive has gone bad

• Factory reset wireless router connection problems?

  Hello

  I recently did a factory reset on my HP6745f desktop running Win7 sp1 and I don't know if my problem is with HP or Linksys/Cisco (my router). I already contacted the support Cisco who reported the problem seems to be "a matter of HP, a corrupt driver or other third-party issue" and then offered to help, for a price. I'm hoping to avoid that if possible.

  This office computer is directly connected to the router via an Ethernet cable. Cisco software was that I want to install that 'control' of my router (called Cisco Connect) and when I try to install the software, I get a message saying: "We could not find your router" (that's why the software will not install) - although I am accessing internet through that router. Even if I try to enter my network name and the password, it cannot find anything. I am also unable to access the router via my browser "168.198.1.1".

  I am unable to connect wireless with the same desktop so, my 2 wireless laptops have no problem of connection at all, which leads me to believe it's something specific to my desktop pc.

  The Cisco Connect software has already been installed on my desktop and it worked fine. I guess my question is: someone has any suggestions for me? This could be a driver problem? How can I identify what (s) for 'check '?

  Any help would be greatly appreciated.

  I thought about it! My router can use a "network key" to connect other computers to the router. I guess when I reset my pc all this info has been removed and the router could not communicate.

  I have just created a network key on a flashdrive USB of my laptop, plugged the USB in my office and hop, I reconnected properly. Thanks for the suggestions, I really appreciate the help.

• What is the problem with my iphone? He says still no service but my sim card works with other phones, after a reboot it says searching until I have to remove and reinsert the sim ive done all what is the factory reset to open the phone to verify any damag

  IPhone 6 64 gb

  iOS 9.2.1

  The phone says no service but the SIM card works, everything in the phone works except the flash still lights up and flickers sometimes before becoming stable but who don't mind not 'that' much, ive tried factory reset and everything, ive also open the unit and looked for signs of damage, the phone knows there is a SIM card in the phone , but he never says the name of the carrier, also after the restart he said looking and does not stop until I have remove and reinsert the SIM card.

  You can restore the factory state after an iTunes backup

  If this does not resolve the problem then you may want to align on Apple or an approved repair shop

• Satellite T130 - 11 H Factory Reset - problems later

  I factory reset my Toshiba laptop and now I have problems.

  When I start the laptop I constantly get the message "prepare your pc for first use" and it starts, Toshiba menu starts too and keeps telling me it's to complete the installation.

  Randomly, he finished and restarts, boots up to the same problem.
  I tried to reinstall via usb as disk media.

  It s really strange.
  Do you use an installation of recovery for the first time?

  The value of the default BIOS and try again. You can also try to format the whole HARD disk before starting the installation of recovery using your USB key.

• [SOLVED] A3500-FL problem after factory reset

  After a hard reset / factory reset I have boot, but after that, all I see is a black screen with a rotating circle / turning point in the middle.

  I can access the notification area, but I can't access settings or Launcher.

  help, please!

  P.S. I read this drug on this model and could not find a solution. Any help will be much appreciated

  AMAZING!

  the problem was that I was holding the tablet in portret orientation while it starts.

  So, I've ACCIDENTALLY keep it in LANDSCAPE mode, and voila! He seized the allowed parameters. So easy!

  I hope this will help others

• Problems with factory reset on a Packard Bell

  Hi cox.haley1,

  After a Microsoft update Tuesday May 13 laptop Packard Bell Easynote TK85-GN-051UK of my granddaughter had a huge problem with the start-up that could only be ordered with a Factory Reset. Finally I had all this work and re-installed all software programs. Several days later, after update of Microsoft more, another problem arose that could only be fixed again with a Factory Reset, so I had some things to begin to repair, but it got stuck in the Installation of the software... Install Office 2010...33/45

  18hrs. later he was still stuck there.

  I sent to Packard Bell for re-installing operating system Windows 7 DVD & utilities drivers & Applications DVD... Incl. postage. £37.

  They have not worked as once more stuck in the same place.

  Packard Bell is a Dutch manufacturer and a subsidiary of Acer will help so I don't need to waste money on recovery discs.

  Can anyone suggest something to help please?

  Separated from the:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/Windows-cannot-complete-installation-in-safe-mode/5e913a56-B29B-4386-A462-20e1991a1edc#LastReply

  Thank you. All sorted now. There is a corruption of Microsoft Office files. Formatting of hard disk. Re-installed my Windows 7, etc and then all software, updates everything and now all is well again.

• Problem to use "factory reset" Cisco VCS!

  I have problems with equipment of VCS to achieve the formats it, when I use the command "factory reset", it shows me an error with the number series and the release-keys as you can see in the picture as an attachment.
  In addition to the above problem, it does not allow access to the console with administrator only with root user interface and does not connect via the browser (white screen).
  Anyone had a similar experience, or have information which may help to be able to format the device to see if the return to normal operation?

  When logged in as root, you can manually enter the release key into the system.

  Use the following command:

  echo 1234567890123456 > /tandberg/etc/rk

  where 1234567890123456 is your key to unlocking 16-digit following, restart the VCS. Wayne - don't forget the frequency responses and mark your question as answered as appropriate.

• Pavilion dv6t-7000 CTO: problem factory reset Windows 7 to 8

  Hello

  My laptop came pre-installed with windows 7, I've upgraded to windows 8 when he was out. Now, I want to do a factory reset me back to window 7.

  (1.) I tried to use the HP Support Assistant on my PC but received a message that there is 'some missing files', was able to complete the restore process and that I should "insert media". I then inserted the recovery that I was responsible for copy for security reasons. I got a message saying "try again".

  2.) I tried tune security, it's the same deal.

  Please, help because I don't know if my recovery is corrupted and when he is grateful the disks copied recvoery.

  Assistance on how to use the restore disks would be highly appreciated. *

  Thanks a bunch

  Please read This GUIDE on how to perform a restore of the entire drive.

• RNDU2000 problem after factory reset

  Hi all

  A friend of mine gave me his RNDU2000.

  I tried a factory reset. RAIDar find to restart and gave me the choice. I chose XRAID2.

  After several minutes (test drives, intallatation...) device reboot and stuck with these configuration LED: Power On, Bill, 1, 2 flashing.

  RAIDar is more and I had no access to admin frontview.

  I changed hard drives, are doing a factory reset again and got the same results...

  Ping device response.

  Any idea?

  The firmware on the flash has been corrupted, so I put the latest firmware on the flash.

• HP 15 laptop: factory reset problem

  I have my laptop HP 15 factory reset and it has been said to 99% for four or five hours now. What is a normal process or should I just wait it out until he finishes? I have my computer laptop factory reset because I could not remember the Windows password to connect to the computer while I was put in place.

  anconelly wrote:
  I have my laptop HP 15 factory reset and it has been said to 99% for four or five hours now. What is a normal process or should I just wait it out until he finishes? I have my computer laptop factory reset because I could not remember the Windows password to connect to the computer while I was put in place.

  That doesn't look good... a couple hours but goes on five hours is something serious goes wrong. Maybe you should order the HP factory recovery disc and try again. I think that something has gone wrong here.

  HP computers - get HP recovery disks or HP USB recovery disc
  Read this before ordering your recovery discs! (United States and Canada only)
  HP computers - performing a recovery of HP (Windows 8) system

• U2412M monitor factory Reset problem

  When you try to Factory Reset my monitor, when the box "Are you sure you want to reset to the default settings?" appears, I can't my cursor in the box to get to 'Yes' / 'no '.

  The cursor continues to go behind the message box.

  Any suggestion would be appreciated.

  The manual is not in the details, but you must use the buttons on the monitor down to somehow select Yes, then accepts when the green check mark.