want 5660 Wireless: scanning to email story want 5660

Similar Questions

• Want 7640: scan to email

  I have a new fancy 7640 all-in-one that I cannot receive emails of scans made from the electronic mailbox "button", or by opening a new e-mail message and adding the scan as an attachment.  Initially he used to take a few hours for the email to appear, and now nothing appears.  Web enabled, I am at a loss to what is wrong, and my working life is at stake.  We have HP connected laptop and Windows 7.  Someone at - it any help?    TIA

  Hello

  Sorry to hear about the problems you're having with scanning to E-mail. I mainly use the scan to Email from the printer and leave the PC of the equation.  Answer the questions below if you are interested in getting setup in this way.

  1. Web services are enabled?
  2. The printer is connected to a wireless network with Internet access?
  3. You have created a sweep to the e-mail account via the front panel of the printer?
  4. What does the last part of the email address (domain) that you configure the account with the look like?
  • NOTE: Do not answer with the full e-mail address, the entire domain. For reasons of confidentiality, the moderators will remove it if you do. Just reply with the e-mail domain, examples: @hp.com, @AOL.com and so on.

• OfficeJet 8500 Prime will not connect to wireless for the scanning of email

  HP Officejet 8500 first.

  Western Digital N900 router

  Printer is connected to my home wireless network and wireless to my HP Pavilion laptop (which is in the same room).

  I felt for a few years and I do a LOT of scans to myself on my e-mail and rarely have problems.

  About a month ago, I got a new wireless router, and the problems started.

  I had the wireless configuration.  Printer connect to my home wireless.

  If I try to scan to e-mail, I get a message "unable to connect to the server. Check the address and the name of the server.

  I can print from my laptop very well (wireless)

  I have run the wireless network test report (which incidentially, does NOT use the default tray as specified in default values, so I have to remove the media in a status bar and replace them with paper to make turn this test).

  All passes.

  very good signal strength.

  no other network with the same ssid

  Wireless networkes detected: 3

  Channel 11

  everything looks great.

  I connect to my router (from my wireless laptop).

  My router says that the printer is on the network.

  I turned off/power on router to reset.

  I tried the reset network default printer and returning via the wireless Assistant.

  I tried another wireless (5g below)

  I got the preferred wireless network name and password several times.

  I turned the printer deactivation / activation.

  The SSID signal is using 2.4 Ghz (802.11 B + g + n) 20 / 40 mhz channel (auto) AND I ALSO tried with channel (11) just

  The router includes a 5 GHz (802.11 a + n), but the printer never sees this SSID, and tried manually enter the name and password as well.

  I get the same error every time.

  Sounds like you arehaving problems with scanning to email. Can you tell me first if you have tried all the other email accounts other than the one you are using. According to the security on the SMTP servers for the customer, you will have to go and try another account. I suggest to make a Gmail account and attempt to put in place the new feature.

  I would like to know how this happens, and I'll get back right with you!

  -Spencer

  PS I hope you had a great weekend and had a wonderful day!

• Set up the Scan to email on Mac with HP Officejet Pro 8500 Wireless

  Anyone know how to find the SMTP server information to set up your email inbox out when setting up scan to email on a Mac?

  Hello Rocgood.

  Please check this document.

  http://support.HP.com/us-en/document/c02914043

  Bravo!

• cf286a: Scan to Email without a computer

  I need to configure a scan to e-mail setup in a very remote to be exploited by unschooled people. Hand written forms must be sent. Fax equipment does not have the limitations of the cell, but I have high speed internet and WiFi.  A computer cannot be used, but we need to send an email directly from the analysis. I thought a LaserJet cf286a but can buy any other model available in southern Africa. The operation must be as simple as possible. Is it possible and what model is recommended?

  Hello, the Laserjet printer you have does not support stand-alone scanning to e-mail. HP, however, has a number of inkjet printers who manage the scan to email via the pritner - pritner to installation over network with wireless access to the Internet, select web services and create a scan to e-mail with an e-mail account. You don't need a PC to configure the printer, and you don't need a PC to send scans. Here are the models that support. (I'm in the US and do not know what is available in your area)

  Photosmart 5520
  Photosmart 6520
  Photosmart 7520
  Want 5530
  Want 5640
  Want to 5660
  Want 7640
  OfficeJet 5740
  OfficeJet 8040
  OfficeJet 6500 has
  OfficeJet 6600/6700
  OfficeJet 7610
  OfficeJet Pro 8500 has
  OfficeJet Pro 8600
  OfficeJet Pro 8610/20/30

• HP photosmart 6510: error on hp photosmart 6510 showing-95 when using scan to email

  My photosmart hp 6510 displays error - 95 when using scan to email. Help!

  Hello @twinec, greetings!

  Thank you for joining the Forums of HP Support! I came across the question you posted, and I want to help you with the best of my knowledge.

  You can try a manual DNS address assignment to fix most of the analysis of the questions by e-mail. Try the steps mentioned below and check:

  • Get the IP address of the printer, you can touch the 'Wireless' icon on the Control Panel printer to get the IP address.
  • Type the IP address in your web browser to get the EWS page on your computer printer.
  • Go to the 'Network' tab - click on "wireless (802.11), and then click «network address (IPv4)»»
  • Click on the radio button that says 'Manual of the DNS server' and under manual type favorite 8.8.8.8 and manual replacement enter 8.8.4.4 (it is Google's DNS server address)
  • Save the settings. Restart your modem, router and printer.

  Let me know how it goes! Good luck

  See you soon

  Please click on 'acceptable' on the post that solves your problem to help others to find the solution. To show gratitude for my help, please click the 'Thumbs Up icon' below!

• Error 403 when scanning to email

  Hello

  I have seen others with this problem.  We used to be able to scan to e-mail for months, but today, we get an error saying "connection to the server: 403.  The printer is connected to the internet.  We have a printer 6520.

  We have tried to re-boot and unplugging everything already.  Please can someone help.

  Thank you.

  Hi Nancy_AMS,

  I want to help you with the error to connect to the server, that you face. Looks like you are using a scanning of email app from the front panel of the printer, if this is true, follow these steps to solve the problem.

  1 obtain the IP address of your printer

  a. This can be done by pressing the icon on the printer wireless.

  2. Enter the printer's IP address in a browser.

  3. Select the tab network at the top of the page.

  4. on the left, select network.

  5. Select Network (IP) address

  6. select manual DNS server

  a. manual Preferred DNS should read 8.8.8.8

  b. alternate DNS server should read. 8.8.4.4

  7. Select apply you could get a fair warning select OK.

  Let me know if that solves the problem.

  The above information has been found on next Thread by garytech1

• HP ENVY 5530: Scan to email problem

  I have a problem of "scan to e-mail"

  Many worked yesterday, now it says "there was a problem connecting to the server.

  He sent me the code 'connect' e-mail - so a communication that happens...

  He repeats to me it is a problem of HP Server and forums keep instructing me to stop the 5530 WANT and reset the wireless hub - I did this 13 times already and he won't do something else that wasting time!

  I am able to print via Google Chrome Cloud Print, is not MY network problem, my printer connects every time my router wireless EA, no problem.

  For example, HP has a mail server problem, solutions?

  Printer model: HP ENVY 5530

  Hey @lgstorbay,

  Welcome to the Forum from HP Support.  I hope you enjoy your experience here.

  I understand that you are unable to scan to email using your HP ENVY 5530 e-all-in-one printer.  I would like to work with you on this. I have some suggestions that could restore this functionality for you.

  When users encounter this type of problem in general, I suggest from scratch with wireless printer, webservices and scan to e-mail setup.  You can clear all of these parameters in a swoop by the factory default restore * your printer.

  Here's how:

  * Note that this step resets the setting up your printer wireless, address ePrint and other custom print settings. If you have created a custom address @hpeprint.com it is permanently erased. For more information about custom addresses ePrint, click here. In addition, you need to add your printer via Google Cloud Print, if you have completed this step. Click here for instructions.

  • Front panel of the printer, arrow down and select Tools
  • Select restore default

  Then touch the wireless icon, run the Wireless Setup Wizard to restore your network connection, and then tap the Webservices () and reactivate your webservices.

  If you are able to successfully reactivate your webservices, tap on the icon of your printer wireless () and make a note of the IP address of the printer.  Then, follow these steps to configure a manual DNS:

  • Enter the printer's IP address in a web browser (Chrome, Firefox, Safari, Internet Explorer) and press ENTER to go directly to this page.
  • Click the network tab.
  • In the submenu on the left, click Networking.
  • Then click on the network (IP) address.
  • Click Manual DNS server.
  • DNS preferred as 8.8.8.8 manual entry
  • Auxiliary DNS server entry as 8.8.4.4
  • Click on apply to finalize this change.

  Then, tap the scan icon and enter the e-mail address you want to scan to.  Then, recover the PIN than you should automatically receive and complete your scan to contact the installer.  Ideally, if you are able to get this good service will be fully functional.

  Please let me know the result of your troubleshooting by responding to this post.  If I helped you to solve the problem, feel free to say "You rock!" by clicking the "Thumbs Up" icon below and by clicking to accept this solution.

  Thanks for posting in the Forum from HP Support.  Have a great day!

• HP7520: HP7520 - scan to email problel

  Hi, I read a lot of emails about the scanning to email questions. I have the same problem as others. Scanning to email worked perfectly well for months. Now he returns constantly with the message "unable to connect to wireless services.
  I tried all the suggestions to the HP site and entering codes 8888 and 8844 under my IP address etc etc.
  Can someone please send me the email that seems to have solved one similar problem to others?
  Thank you very much
  AMB

  Hello @AllyMcBeal ,

  Welcome to the HP forum.

  I understand that you are getting a server connection error when trying to scan to e-mail.

  I want to help you with this.

  I realize that you have already configured a manual DNS.

  There are two things I want to make sure that you have done before resetting the printer.

  1. turn off the printer.

  Then unplug power to your router or a minute.

  Wait a minute.

  Reconnect the power on the router.

  Turn on the printer.

  When the blue light wireless on the printer stops flashing, try scanning to e-mail.

  2. remove web services.

  Tap the ePrint icon in the upper left corner of the screen.

  

  go to settings, select Remove web services.

  If you have customized the address printers ePrint, you will lose the address.

  There is unfortunately no way to retrieve e-mail. He'll be gone for good.

  After removing the web services, you will be sent to the main screen.

  Press again the ePrint and enable web services.

  When print information sheet, go to scanning to e-mail.

  You will need to set it up again like you did the first time.

  Also, if you are familiar with your router, check the following settings.

  -Multicast must be enabled
  -Hello activated * for Airprint
  -Mac filtering should be disabled
  -Also, make sure that your router has an update of the current firmware if
  necessary

  Ports to open are: * Eprint and Apps

  (Inbound) UDP ports
  80
  443

  (Outbound) TCP ports
  5222
  5223

  Finally, I sent you the reset via private message. Please ensure that the above elements have been done or scrutiny before resetting the printer.  Please read this post from Bob_Headrick, regarding the reset of the printer.

  Reset the printer: what you need to know

  If you can't yet scan email I would call the Cloud service.

  Please contact our Cloud Services at 855-785-2777.  If you do not live in the United States / Canada region, please click the link below to get help from your region number.  http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

• Photosmart 5520: Scan to email: server connection error 403 (with app and scan)

  I scanned to send several times than I can count, but a few days ago, I get nothing other than the error "connection server 403 error." I checked the forums and someone said to go into apps and download the application. It did not work. I rebooted and tried everything, which he expects. Yet, nothing. Is this error to do with something outside as the real servers HPs - or is this something internal that I can fix it? I went as far as I can without resetting to factory settings (which I am fearful because I recently had the country code has changed on this issue and do not want to return to the country of origin), someone has any suggestions other than what I've sifted through the forums already?

  Hey @fruitfly20,

  Welcome to the HP forums! I hope you enjoy your stay here.

  I understand that you have some problems with the scan to E-mail on your Photosmart 5520. I can help with that.

  We can try I couldn't see you is to remove and enable web services. To do:

  1. On the printer, click web services icon that looks like a tablet with a phone beside her.
  2. Click settings.
  3. Click on delete Web Services.
  4. Click again on the Web Services.
  5. Click on accept and Yes.
  6. Try scanning to Email.

  I would like to know if it works. If it does please not then let me know and we can try something else. Even if it solves your problems, so please let other users of the forum know clicking on accept as Solution below my post.

  I hope this helps and I hope you have a nice day!

• OfficeJet Pro 6830: scan to email

  scan to send an email to a hotmail account works fine.
  but scanning to an e-mail [email protected] address is not accepted and I am asked to give a good e-mail adres, although this great woorks adres while sending an e-mail on my computer.
  who can help to tonsolve my problem?

  Hello @dinvas,

  Thanks for getting back to me with your Scan-to-Email method. I did some additional research in the area of e-mail sending the issue that you are experiencing and found the following information:

  "The ePrint server will not accept messages sent from private areas."  (Source) The e-mail domain "@xs4all.nl ' that you are having problems with a private domain would be qualified bird. That's why the scan to email to your Hotmail account works fine, but others do not.

  I hope that this clears up any confusion. If you want to explore the options of additional assistance that I recommend you to contact our Cloud telephone support queue.

  Services Cloud HPs can be reached at the 855-785-2777.

  If you do not live in the United States / Canada region, please click the link below to get help from your region number.

  Worldwide contact HP

  It has been a pleasure to work with you. I wish you good luck going forward with this!

• scan to email on Color LaserJet MFP M177fw Pro

  I'm trying to download the printable 'Scan to Email' on my Color LaserJet MFP M177fw Pro, but he continues to throw an error?

  When I bought the printer (yesterday), I was told that I could put up to Scan in a document and have it automatically send as an e-mail message to a recipient.  How to achieve this?

  Thank you!

  Hi grahammccarthy,

  Welcome to the HP Support forums.  I understand that you want to know how to scan to email using your printer Laserjet Pro MFP M177fw.

  You don't mention the operating system that you use, so I've included links to all the operating systems supported on the way to analyze.  There is a section called "How to scan with HP software" and there you can find a subsection entitled "How to scan to email.  It is in the subsection, you will find the instructions you need to follow to be able to scan to email.

  How to perform a scan: Windows XP

  How to perform a scan: Windows Vista

  How to perform a scan: Windows 7

  How to perform a scan: Windows 8

  How to perform a scan: OS X v10.8

  How to perform a scan: OS X v10.9

• HP Officejet 4630: Scan to Email HP Officejet 4630

  Hello world

  I come short in my research.  How can I scan to email with this printer?  I could with an older HP printer.  Have they removed that feature?  It would be embarrassing if they did.  He had these incredible reviews, I didn't have an inventory of all individual features.  Shame on me for that I guess (unless I'm out of luck!).  The only option that I see when I hit on the printer, scan button is to scan directly to a computer.

  Thank you!

  Hi @bmbell3030,

  Welcome to the Forums of HP Support!

  I understand you want to be able to scan to e-mail on your HP Officejet 4630 e-all-in-one printer. I will definitely do my best to help you.

  I checked the options on the HP Officejet 4630 e-all-in-one printer and doesn't have the ability to scan to e-mail.

  E-all-in-one-HP Officejet series 4630 - Manual.

  Hope that answers your question. Thank you for posting!

• Server connection error - scan to email App

  Hello
  
  Out of the blue my scan to email app no longer works on my HP Officejet Pro 8600. I get the error that says check the connection to your server. I did it. My connection to the server is fine, and my WiFi signal is very strong. I have no e-printing problem I just can't scan to email more. I have unplugged, rebooted, restored and updated the firmware, but still no luck.
  
  I see that many of you are experiencing a similar problem.
  
  Help, please!
  
  Thank you!

  happytohelp01,
  
  Thank you for the phone #. The woman at HP has solved my problem. For others out there, here is the solution that helped me.
  
  -Get the IP address of your printer (can find it under Network Config under settings)
  -Type the IP address in your web browser
  -On the left side, click iPV4 under WIRED or wireless (however you are connected)
  -Click on manual DNS
  -Under favorite type 8.8.8.8
  -Under type of spare 8.8.4.4
  -Disconnect the Modem from the wall. Wait 30 seconds. Reconnect it.
  -Turn off your printer by pressing the power button. Wait 30 seconds. Turn on.
  
  I hope this helps.

• Scan to email using gmail as SMTP

  I have a printer HP Office Jet Pro 8600 N911g.  I have this configuration currently with the network folder scan works very well.  I would like to set the scan to email.  As Headquarters uses the Exchange I have to use another service for SMTP.  Set up a Gmail account and puched in appropriate settings, but the device is unable to connect to gmail.  I tried several ports without success, I also tried to configure the e-mail server settings, again try several ports without success.  I tried using all the combinations using SSL and SMTP authentication, but nothing seems to connect.

  Gmail actually works, I have seen some say yes, others say no.  Is there another service that could work outside my corporate network or do I need to set up an internal, just e-mail server so that I can scan to e-mails?

  Hello

  Try following the exact steps below and check if this can help:

  1. Click the setting of network on the printer and locate its IP address.
  2. Type this IP address from the browser on your PC to access the EWS page.
  3. Click the scanning tab.
  4. Under Scan to E-mail click e-mail profiles.
  5. Click new.
  6. Type your email address and any name to display selected, and then click Next.
     Note: Be sure to take note of the specific display name.
  7. Fill in the parameters of mail as follows:
     -smtp.gmail.com
     -465
     -Tick the box SSL
     -Check the box next to the SMTP authentication option
     -Enter your full gmail address as the user name and the password for gmail.
  8. Click next and dontinue following the steps until the summary, then click on save and test.

  If the Test fails for any continmue of connectivity problem following the steps below:

  1. Click the network tab.
  2. Under the active connection type section, click IPv4 (wired / wireless).
  3. Keep the IP address Configuration because there is, under the address Configuration DNS check the box next to manual DNS server.
  4. Define DNS preferred as 8.8.8.8
  5. Set the auxiliary DNS as 8.8.4.4
  6. Click the scanning tab and click the e-mail profiles again.
  7. Click the Test button next to the previously configured display name and check the time difference.

  Shlomi