Cisco Wireless
AP1522 802.11n
Dose cisco 1522 AP support 802.11n?
Wireless Bridge-Link a Wifi router to another router Wifi - network expansion
Hello A question many people ask themselves, to ask the wifi community. On site-a computer on site b. | | -----Wired--
WLC 5508 licenses
I recently deployed a 5508 with basic license and license for 11 AP now, I want to add that another controller for redundancy wanted to know how the licenses work? Do I need to get more than 11 licenses for this one also? And as I add licenses of AP
Not getting ip address local vlan Reap H
I have an AP [UK03AP21] in h-mode to harvest with local switching connected via a switch trunk. The H-reap AP is configured for vlan native 200 and connected to Fa0/3 on the button below. The relevant part of the configuration of the switch is:- .DHC
Aironet 1310 bridges keep losing connection
There was a similar thread about this last year and I tried what was listed in nothing doesn't. I have 2 bridges Aironet 1310, one under a road bridge and the second as a slopes(32°) with the customers. These worked great for almost a year, we have
Aironet not connecting to Internet
I have a simple scnerio PC - AP - Modem When I ping from PC to AP I can do easily, but when I ping from PC to the Modem or internet it says host unreachable Destination PC IP 10.2.2.222 AP, ip 10.2.2.241 Modem IP 10.2.2.1 (Mode routed Internet connec
WLC - authentication
Hello Can someone tell what version of the software is delivered with WLC 5508. Wired users get authenticated via Windows AD under Windows 2008 ENT. After you have configured WLC, wireless users must also be authenticated via AD running Win 2008, d
DHCP wireless
I have just taken the reins of a new wireless solution. Currently, they have only a WLAN and implement the second for customers only, so they have access to the internet and no device internal. The controller is an AIR-WLC52 4.2.61.8 running. All DHC
AIR-LAP1042N-N-K9 in standalone mode? FIXED *.
Hey all,. I have a brand new AP 1042N I need to convert a lightweight standalone... the unit currently has the following firmware on it: C1040 bootloader (BOOT-C1140-M), Version 12.4 [100 BLD - wnbu_a100.201007080000]updated Friday, July 8, 10 01:06
Deployment of 200 + 7925Gs
Does anyone have any experience with massive deployments of IP phone 7925 G wireless? We have 200 + to unwind. We try to find a way to simplify the process. Does anyone have advice? Ways to avoid setting up each phone individually? Thank you! Fri
How to configure a SSID without output interface
Hello I have a WISN, and I want to set up a local network with a special SSID. No computer required to get out. How to configure the interface? Thank you.
Auto power off the radio when WAN breaks down
I have a stand-alone CISCO IOS 12.4 T6 877 wireless router (9) I want the radio to stop, if there is no output-(habituellement l'ADSL mais concievably Ethernet) port but I can't find the commands. I had a problem for a long time with an another non -
Traffic LWAPP Flow the WLC
Hello I need to know about traffic flow in the WLC. I know that all traffic must pass in the WLC, but I need to know if I can change it. Example: I have a lwapp ap, but I want to pass traffic in this unit and after crossing the cable without a pass t
Information WiSM2
The Cisco's Web site is rare on its details on WISM2. This looks like a great replacement for the WISN and a good alternative to the deployment of a 5508 if you have a well positioned 6500 for the WISM2. The only documents I found that reference it a
How to add the new AP on WLC
Hello I currently have a WLC 4402 and 18 AP 1131. Everything works fine.I would add 2 AP to expand coverage. I have 2 1042 AP I want to add. How?I plugged my wifi vlan AP, and it gets its IP address given by the WLC (which is DHCP). I see it next to
WLC 5508 WIRELESS problem SSID
Hello I recently got a 5508 controller. I use 1 SSID for employees on the main site (using certificate authentication). I want to use the same SSID with different DHCP servers on remote sites, (AP configure with the HREAP mode). So I tried to configu
Difficulty accessing speed N Wireless with AP1141N
I have successfully installed my AIR-AP1141N-A-K9 with open authentication WPA secutiy but the fasting that connect our wireless devices is 54 Mbps. Can anyone shed some light as to why this is happening? Thank you
Requirements of the mobility for the comments of anchor WLC group
Hello- I always assumed that you cannot create a tunnel between a local WLC and an anchor WLC comments that are in different groups of mobility. However, I was told recently (no more details) that it is possible. So I put to test this. I'm trying
Cisco 1260
I recently bought my first Cisco access point ever, a 1262. Having no experience with the brand of Cisco of AP, I guess I'd be able to connect to my network, use http or ftp or series and set it up and I would like to make. But when I connect it vi
By integrating wireless deployment Active Directory User Group
I'm discovering best practices in deploying a WLAN for users in the environment to cooperate, who uses their company active directory integrated mobile to join the WLAN. I know that this can be done easily using certificates, but I just want to find